mirror of
https://github.com/pineappleEA/pineapple-src.git
synced 2024-11-29 19:38:23 -05:00
325 lines
12 KiB
Markdown
Executable File
325 lines
12 KiB
Markdown
Executable File
# Dynarmic Design Documentation
|
|
|
|
Dynarmic is a dynamic recompiler for the ARMv6K architecture. Future plans for dynarmic include
|
|
support for other versions of the ARM architecture, having a interpreter mode, and adding support
|
|
for other architectures.
|
|
|
|
Users of this library interact with it primarily through the interface provided in
|
|
[`include/dynarmic`](../include/dynarmic). Users specify how dynarmic's CPU core interacts with
|
|
the rest of their system providing an implementation of the relevant `UserCallbacks` interface.
|
|
Users setup the CPU state using member functions of `Jit`, then call `Jit::Execute` to start CPU
|
|
execution. The callbacks defined on `UserCallbacks` may be called from dynamically generated code,
|
|
so users of the library should not depend on the stack being in a walkable state for unwinding.
|
|
|
|
* A32: [`Jit`](../include/dynarmic/A32/a32.h), [`UserCallbacks`](../include/dynarmic/A32/config.h)
|
|
* A64: [`Jit`](../include/dynarmic/A64/a64.h), [`UserCallbacks`](../include/dynarmic/A64/config.h)
|
|
|
|
Dynarmic reads instructions from memory by calling `UserCallbacks::MemoryReadCode`. These
|
|
instructions then pass through several stages:
|
|
|
|
1. Decoding (Identifying what type of instruction it is and breaking it up into fields)
|
|
2. Translation (Generation of high-level IR from the instruction)
|
|
3. Optimization (Eliminiation of redundant microinstructions, other speed improvements)
|
|
4. Emission (Generation of host-executable code into memory)
|
|
5. Execution (Host CPU jumps to the start of emitted code and runs it)
|
|
|
|
Using the A32 frontend with the x64 backend as an example:
|
|
|
|
* Decoding is done by [double dispatch](https://en.wikipedia.org/wiki/Visitor_pattern) in
|
|
[`src/frontend/A32/decoder/{arm.h,thumb16.h,thumb32.h}`](../src/frontend/A32/decoder/).
|
|
* Translation is done by the visitors in `src/frontend/A32/translate/translate_{arm,thumb}.cpp`.
|
|
The function [`Translate`](../src/frontend/A32/translate/translate.h) takes a starting memory location,
|
|
some CPU state, and memory reader callback and returns a basic block of IR.
|
|
* The IR can be found under [`src/frontend/ir/`](../src/frontend/ir/).
|
|
* Optimizations can be found under [`src/ir_opt/`](../src/ir_opt/).
|
|
* Emission is done by `EmitX64` which can be found in `src/backend_x64/emit_x64.{h,cpp}`.
|
|
* Execution is performed by calling `BlockOfCode::RunCode` in `src/backend_x64/block_of_code.{h,cpp}`.
|
|
|
|
## Decoder
|
|
|
|
The decoder is a double dispatch decoder. Each instruction is represented by a line in the relevant
|
|
instruction table. Here is an example line from [`arm.h`](../src/frontend/A32/decoder/arm.h):
|
|
|
|
INST(&V::arm_ADC_imm, "ADC (imm)", "cccc0010101Snnnnddddrrrrvvvvvvvv")
|
|
|
|
(Details on this instruction can be found in section A8.8.1 of the ARMv7-A manual. This is encoding A1.)
|
|
|
|
The first argument to INST is the member function to call on the visitor. The second argument is a user-readable
|
|
instruction name. The third argument is a bit-representation of the instruction.
|
|
|
|
### Instruction Bit-Representation
|
|
|
|
Each character in the bitstring represents a bit. A `0` means that that bitposition **must** contain a zero. A `1`
|
|
means that that bitposition **must** contain a one. A `-` means we don't care about the value at that bitposition.
|
|
A string of the same character represents a field. In the above example, the first four bits `cccc` represent the
|
|
four-bit-long cond field of the ARM Add with Carry (immediate) instruction.
|
|
|
|
The visitor would have to have a function named `arm_ADC_imm` with 6 arguments, one for each field (`cccc`, `S`,
|
|
`nnnn`, `dddd`, `rrrr`, `vvvvvvvv`). If there is a mismatch of field number with argument number, a compile-time
|
|
error results.
|
|
|
|
## Translator
|
|
|
|
The translator is a visitor that uses the decoder to decode instructions. The translator generates IR code with the
|
|
help of the [`IREmitter` class](../src/frontend/ir/ir_emitter.h). An example of a translation function follows:
|
|
|
|
bool ArmTranslatorVisitor::arm_ADC_imm(Cond cond, bool S, Reg n, Reg d, int rotate, Imm8 imm8) {
|
|
u32 imm32 = ArmExpandImm(rotate, imm8);
|
|
|
|
// ADC{S}<c> <Rd>, <Rn>, #<imm>
|
|
|
|
if (ConditionPassed(cond)) {
|
|
auto result = ir.AddWithCarry(ir.GetRegister(n), ir.Imm32(imm32), ir.GetCFlag());
|
|
|
|
if (d == Reg::PC) {
|
|
ASSERT(!S);
|
|
ir.ALUWritePC(result.result);
|
|
ir.SetTerm(IR::Term::ReturnToDispatch{});
|
|
return false;
|
|
}
|
|
|
|
ir.SetRegister(d, result.result);
|
|
if (S) {
|
|
ir.SetNFlag(ir.MostSignificantBit(result.result));
|
|
ir.SetZFlag(ir.IsZero(result.result));
|
|
ir.SetCFlag(result.carry);
|
|
ir.SetVFlag(result.overflow);
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
where `ir` is an instance of the `IRBuilder` class. Each member function of the `IRBuilder` class constructs
|
|
an IR microinstruction.
|
|
|
|
## Intermediate Representation
|
|
|
|
Dynarmic uses an ordered SSA intermediate representation. It is very vaguely similar to those found in other
|
|
similar projects like redream, nucleus, and xenia. Major differences are: (1) the abundance of context
|
|
microinstructions whereas those projects generally only have two (`load_context`/`store_context`), (2) the
|
|
explicit handling of flags as their own values, and (3) very different basic block edge handling.
|
|
|
|
The intention of the context microinstructions and explicit flag handling is to allow for future optimizations. The
|
|
differences in the way edges are handled are a quirk of the current implementation and dynarmic will likely add a
|
|
function analyser in the medium-term future.
|
|
|
|
Dynarmic's intermediate representation is typed. Each microinstruction may take zero or more arguments and may
|
|
return zero or more arguments. A subset of the microinstructions available is documented below.
|
|
|
|
A complete list of microinstructions can be found in [src/frontend/ir/opcodes.inc](../src/frontend/ir/opcodes.inc).
|
|
|
|
The below lists some commonly used microinstructions.
|
|
|
|
### Immediate: Imm{U1,U8,U32,RegRef}
|
|
|
|
<u1> ImmU1(u1 value)
|
|
<u8> ImmU8(u8 value)
|
|
<u32> ImmU32(u32 value)
|
|
<RegRef> ImmRegRef(Arm::Reg gpr)
|
|
|
|
These instructions take a `bool`, `u8` or `u32` value and wraps it up in an IR node so that they can be used
|
|
by the IR.
|
|
|
|
### Context: {Get,Set}Register
|
|
|
|
<u32> GetRegister(<RegRef> reg)
|
|
<void> SetRegister(<RegRef> reg, <u32> value)
|
|
|
|
Gets and sets `JitState::Reg[reg]`. Note that `SetRegister(Arm::Reg::R15, _)` is disallowed by IRBuilder.
|
|
Use `{ALU,BX}WritePC` instead.
|
|
|
|
Note that sequences like `SetRegister(R4, _)` followed by `GetRegister(R4)` are
|
|
optimized away.
|
|
|
|
### Context: {Get,Set}{N,Z,C,V}Flag
|
|
|
|
<u1> GetNFlag()
|
|
<void> SetNFlag(<u1> value)
|
|
<u1> GetZFlag()
|
|
<void> SetZFlag(<u1> value)
|
|
<u1> GetCFlag()
|
|
<void> SetCFlag(<u1> value)
|
|
<u1> GetVFlag()
|
|
<void> SetVFlag(<u1> value)
|
|
|
|
Gets and sets bits in `JitState::Cpsr`. Similarly to registers redundant get/sets are optimized away.
|
|
|
|
### Context: BXWritePC
|
|
|
|
<void> BXWritePC(<u32> value)
|
|
|
|
This should probably be the last instruction in a translation block unless you're doing something fancy.
|
|
|
|
This microinstruction sets R15 and CPSR.T as appropriate.
|
|
|
|
### Callback: CallSupervisor
|
|
|
|
<void> CallSupervisor(<u32> svc_imm32)
|
|
|
|
This should probably be the last instruction in a translation block unless you're doing something fancy.
|
|
|
|
### Calculation: LastSignificant{Half,Byte}
|
|
|
|
<u16> LeastSignificantHalf(<u32> value)
|
|
<u8> LeastSignificantByte(<u32> value)
|
|
|
|
Extract a u16 and u8 respectively from a u32.
|
|
|
|
### Calculation: MostSignificantBit, IsZero
|
|
|
|
<u1> MostSignificantBit(<u32> value)
|
|
<u1> IsZero(<u32> value)
|
|
|
|
These are used to implement ARM flags N and Z. These can often be optimized away by the backend into a host flag read.
|
|
|
|
### Calculation: LogicalShiftLeft
|
|
|
|
(<u32> result, <u1> carry_out) LogicalShiftLeft(<u32> operand, <u8> shift_amount, <u1> carry_in)
|
|
|
|
Pseudocode:
|
|
|
|
if shift_amount == 0:
|
|
return (operand, carry_in)
|
|
|
|
x = operand * (2 ** shift_amount)
|
|
result = Bits<31,0>(x)
|
|
carry_out = Bit<32>(x)
|
|
|
|
return (result, carry_out)
|
|
|
|
This follows ARM semantics. Note `shift_amount` is not masked to 5 bits (like `SHL` does on x64).
|
|
|
|
### Calculation: LogicalShiftRight
|
|
|
|
(<u32> result, <u1> carry_out) LogicalShiftLeft(<u32> operand, <u8> shift_amount, <u1> carry_in)
|
|
|
|
Pseudocode:
|
|
|
|
if shift_amount == 0:
|
|
return (operand, carry_in)
|
|
|
|
x = ZeroExtend(operand, from_size: 32, to_size: shift_amount+32)
|
|
result = Bits<shift_amount+31,shift_amount>(x)
|
|
carry_out = Bit<shift_amount-1>(x)
|
|
|
|
return (result, carry_out)
|
|
|
|
This follows ARM semantics. Note `shift_amount` is not masked to 5 bits (like `SHR` does on x64).
|
|
|
|
### Calculation: ArithmeticShiftRight
|
|
|
|
(<u32> result, <u1> carry_out) ArithmeticShiftRight(<u32> operand, <u8> shift_amount, <u1> carry_in)
|
|
|
|
Pseudocode:
|
|
|
|
if shift_amount == 0:
|
|
return (operand, carry_in)
|
|
|
|
x = SignExtend(operand, from_size: 32, to_size: shift_amount+32)
|
|
result = Bits<shift_amount+31,shift_amount>(x)
|
|
carry_out = Bit<shift_amount-1>(x)
|
|
|
|
return (result, carry_out)
|
|
|
|
This follows ARM semantics. Note `shift_amount` is not masked to 5 bits (like `SAR` does on x64).
|
|
|
|
### Calcuation: RotateRight
|
|
|
|
(<u32> result, <u1> carry_out) RotateRight(<u32> operand, <u8> shift_amount, <u1> carry_in)
|
|
|
|
Pseudocode:
|
|
|
|
if shift_amount == 0:
|
|
return (operand, carry_in)
|
|
|
|
shift_amount %= 32
|
|
result = (operand << shift_amount) | (operand >> (32 - shift_amount))
|
|
carry_out = Bit<31>(result)
|
|
|
|
return (result, carry_out)
|
|
|
|
### Calculation: AddWithCarry
|
|
|
|
(<u32> result, <u1> carry_out, <u1> overflow) AddWithCarry(<u32> a, <u32> b, <u1> carry_in)
|
|
|
|
a + b + carry_in
|
|
|
|
### Calculation: SubWithCarry
|
|
|
|
(<u32> result, <u1> carry_out, <u1> overflow) SubWithCarry(<u32> a, <u32> b, <u1> carry_in)
|
|
|
|
This has equivalent semantics to `AddWithCarry(a, Not(b), carry_in)`.
|
|
|
|
a - b - !carry_in
|
|
|
|
### Calculation: And
|
|
|
|
<u32> And(<u32> a, <u32> b)
|
|
|
|
### Calculation: Eor
|
|
|
|
<u32> Eor(<u32> a, <u32> b)
|
|
|
|
Exclusive OR (i.e.: XOR)
|
|
|
|
### Calculation: Or
|
|
|
|
<u32> Or(<u32> a, <u32> b)
|
|
|
|
### Calculation: Not
|
|
|
|
<u32> Not(<u32> value)
|
|
|
|
### Callback: {Read,Write}Memory{8,16,32,64}
|
|
|
|
<u8> ReadMemory8(<u32> vaddr)
|
|
<u8> ReadMemory16(<u32> vaddr)
|
|
<u8> ReadMemory32(<u32> vaddr)
|
|
<u8> ReadMemory64(<u32> vaddr)
|
|
<void> WriteMemory8(<u32> vaddr, <u8> value_to_store)
|
|
<void> WriteMemory16(<u32> vaddr, <u16> value_to_store)
|
|
<void> WriteMemory32(<u32> vaddr, <u32> value_to_store)
|
|
<void> WriteMemory64(<u32> vaddr, <u64> value_to_store)
|
|
|
|
Memory access.
|
|
|
|
### Terminal: Interpret
|
|
|
|
SetTerm(IR::Term::Interpret{next})
|
|
|
|
This terminal instruction calls the interpreter, starting at `next`.
|
|
The interpreter must interpret exactly one instruction.
|
|
|
|
### Terminal: ReturnToDispatch
|
|
|
|
SetTerm(IR::Term::ReturnToDispatch{})
|
|
|
|
This terminal instruction returns control to the dispatcher.
|
|
The dispatcher will use the value in R15 to determine what comes next.
|
|
|
|
### Terminal: LinkBlock
|
|
|
|
SetTerm(IR::Term::LinkBlock{next})
|
|
|
|
This terminal instruction jumps to the basic block described by `next` if we have enough
|
|
cycles remaining. If we do not have enough cycles remaining, we return to the
|
|
dispatcher, which will return control to the host.
|
|
|
|
### Terminal: PopRSBHint
|
|
|
|
SetTerm(IR::Term::PopRSBHint{})
|
|
|
|
This terminal instruction checks the top of the Return Stack Buffer against R15.
|
|
If RSB lookup fails, control is returned to the dispatcher.
|
|
This is an optimization for faster function calls. A backend that doesn't support
|
|
this optimization or doesn't have a RSB may choose to implement this exactly as
|
|
ReturnToDispatch.
|
|
|
|
### Terminal: If
|
|
|
|
SetTerm(IR::Term::If{cond, term_then, term_else})
|
|
|
|
This terminal instruction conditionally executes one terminal or another depending
|
|
on the run-time state of the ARM flags.
|