Commit Graph

8484 Commits

Author SHA1 Message Date
Thomas Pedersen
9e5e03d77e Add examples of new mesh options into wpa_supplicant.conf
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-11-20 16:31:09 +02:00
Jouni Malinen
e503861f4d nl80211: Do not try to change STA capability on NL80211_CMD_SET_STATION
cfg80211 will reject any of these attributes regardless of whether the
values actually change or not when NL80211_CMD_SET_STATION is used for
something else than TDLS. This path is hit at least when setting up
mesh, so filter out the attributes from NL80211_CMD_SET_STATION to match
the rules in cfg80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-20 16:31:05 +02:00
Jouni Malinen
f6d1c5d9f8 tests: Fix regression in START line total count
The previous changes to enable stdin control broke the previous case of
showing the total number of test cases in the START lines. Fix that by
using a separate variable for the total number of test casess instead of
using length of the list of remaining test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 22:02:08 +02:00
Jouni Malinen
41aa4bd739 tests: WEP Shared Key index change without deauth
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 17:57:49 +02:00
Jouni Malinen
168d4b097c tests: WEP with non-zero key index
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 17:37:54 +02:00
Jouni Malinen
3e473674f7 tests: P2P_FIND continuing after GO Negotiation failure
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 16:59:11 +02:00
Rashmi Ramanna
9d11832090 P2P: Do not change P2P state on GO Neg failure if it is P2P_SEARCH
Changing the P2P state to P2P_IDLE on GO Negotiation Failure would stop
the previously issued P2P_FIND operation without notifying the upper
layers. Leave the search operation running if in P2P_SEARCH state to
avoid unexpected behavior in case the upper layers issued a new P2P_FIND
while waiting for GO Negotiation to complete.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 16:59:03 +02:00
Kyeyoon Park
47261405d7 AP: Add support for multicast-to-unicast conversion for DGAF Disable
When DGAF Disable is on, perform multicast-to-unicast for DHCP packets
and Router Advertisement packets. This is a requirement for Hotspot 2.0.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:47:06 +02:00
Kyeyoon Park
bd00c4311c AP: Add Neighbor Discovery snooping mechanism for Proxy ARP
This commit establishes the infrastructure, and handles the Neighbor
Solicitation and Neighbor Advertisement frames. This will be extended
in the future to handle other frames.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:47:06 +02:00
Kyeyoon Park
5c58944d08 AP: Add multicast-to-unicast conversion send for "x_snoop"
Multicast-to-unicast conversion send will be needed in various part of
Proxy ARP and DGAF Disable.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:25:13 +02:00
Kyeyoon Park
ed4ddb6d77 AP: Extend the BSS bridge neighbor entry management to support IPv6
This allows adding/deleting an IPv6 neighbor entry to/from the bridge,
to which the BSS belongs. This commit adds the needed functionality in
driver_nl80211.c for the Linux bridge implementation. In theory, this
could be shared with multiple Linux driver interfaces, but for now, only
the main nl80211 interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:23:38 +02:00
Kyeyoon Park
7e4d893978 l2_packet: Add support for NDISC packet filter in l2_packet_linux
Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:15:26 +02:00
Kyeyoon Park
1d783762cf AP: Convert "dhcp_snoop" to use the generic "x_snoop"
Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:14:15 +02:00
Kyeyoon Park
c127355cb8 AP: Add a generic "x_snoop" infrastructure for Proxy ARP
Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:14:02 +02:00
Jouni Malinen
077f13c3e1 tests: Move parallel-vm.py test control to the host
This allows all VMs to be used at the end of a test sequence by
assigning test cases to VMs based on which VM is available for a new
test case rather than splitting the full task at the beginning and
potentially getting stuck with the last VM running long test cases for
significantly longer than another VM that gets shorter duration tests
assigned to it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 15:20:53 +02:00
Jouni Malinen
0d7456e9fd tests: Add run-tests.py -i to control execution from stdin
The new -i command line argument can be used to control test case
execution from stdin to run-tests.py and vm-run.sh. This can be used,
e.g., to run multiple repeated test sequences in a virtual machine
without havign to restart the VM between each iteration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 15:20:53 +02:00
Jouni Malinen
cb8cb33e55 tests: Allow run-tests.py to be run from the vm directory
Some of the paths in run-tests.py are hardcoded and could not handle
tests/hwsim/vm as the working directory. Modify the design enough to
allow ../run-tests.py -L to be used from the vm directory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 15:20:53 +02:00
Jouni Malinen
5e3c0b02a7 tests: Make run-tests.py process test case selection arguments
This allows a list of matching test cases to be produced without having
to run the test cases. Previously, -L output included all defined test
cases regardless of what else was included on the command line.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 15:20:52 +02:00
Ilan Peer
38cb0a2db6 AP: Drop retransmitted auth/assoc/action frames
It is possible that a station device might miss an ACK for an
authentication, association, or action frame, and thus retransmit the
same frame although the frame is already being processed in the stack.
While the duplicated frame should really be dropped in the kernel or
firmware code where duplicate detection is implemented for data frames,
it is possible that pre-association cases are not fully addressed (which
is the case at least with mac80211 today) and the frame may be delivered
to upper layer stack.

In such a case, the local AP will process the retransmitted frame although
it has already handled the request, which might cause the station to get
confused and as a result disconnect from the AP, blacklist it, etc.

To avoid such a case, save the sequence control of the last processed
management frame and in case of retransmissions drop them.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-19 15:20:47 +02:00
Jouni Malinen
453553698c EAP-pwd: Remove unnecessary OpenSSL EVP_sha256() registration
This gets registered in tls_openssl.c from tls_init(), so there is no
need for EAP-pwd implementation to register explicitly. This avoids some
corner cases where OpenSSL resources do not get fully freed on exit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-17 01:20:10 +02:00
Jouni Malinen
afbe57d981 DFS: Fix hostapd operation without hw_mode driver data
If DFS implementation was built in, some configurations with drivers
that do not provide mode information could end up dereferencing a NULL
pointer. Fix this by skipping DFS operations in such cases since not
having information about modes and channels means that hostapd could not
perform DFS anyway (i.e., either this is not a wireless driver or the
driver takes care of DFS internally).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-17 01:14:35 +02:00
Jouni Malinen
e9b783d58c Fix hostapd operation without hw_mode driver data
Commit 7f0303d5b0 ('hostapd: Verify VHT
160/80+80 MHz driver support') added couple of hapd->iface->current_mode
dereferences of which the one in hostapd_set_freq() can be hit with some
configuration files when using driver wrappers that do not have hw_mode
data, i.e., when current_mode is NULL. This could result in segmentation
fault when trying to use driver=wired. Fix this by checking that
current_mode is not NULL before dereferencing it to get vht_capab.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-17 01:08:04 +02:00
Jouni Malinen
01b24c52df wired: Fix deinit path to unregister eloop read_sock
The previous version was leaving behind registered eloop socket
instances.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-17 00:57:15 +02:00
Jouni Malinen
44ac019c96 tests: Report kernel panic clearly in parallel-vm.py
Previously, it was possible for a kernel panic to be missed since the
only sign of it in stdout was reduced number of passed test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 22:34:54 +02:00
Jouni Malinen
7e6942253c tests: Use a single timestamp in all vm-run.sh instances
This avoids possible mismatches in directory and log file timestamps if
the UNIX timestamp (seconds) changes during the startup sequence.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 22:24:18 +02:00
Eliad Peller
7613345814 tests: Add wpa_supplicant WMM-AC test
Add basic wpa_supplicant tests for WMM-AC TSPEC addition/deletion.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 21:40:57 +02:00
Johannes Berg
83b9d426e0 WMM AC: Notify driver before sending DelTS
Switch the stop and sending DelTS to avoid sending data packets
for the session after the DelTS, which is otherwise possible.

This also helps the mac80211 implementation as it requires stopping the
traffic flow before sending the DelTS as it may modify the AC parameters
for the affected queue, and that may in turn affect management frames.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-16 21:40:57 +02:00
Moshe Benji
8506ea6f17 WMM AC: Add wmm_ac_status control interface command
This wmm_ac_status command will show the current status for WMM AC.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:40:51 +02:00
Moshe Benji
71d263ea70 Add wpa_scnprintf() helper function
This provides a simpler version of snprintf that doesn't require further
error checks.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:40:42 +02:00
Moshe Benji
dfa8787833 nl80211: Implement add_ts/del_ts ops
Add ops to notify about TSPECs to add/remove. Additionally, subscribe to
ADDTS/DELTS Action frames to be able to process WMM AC Action frames.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:21:22 +02:00
Moshe Benji
df9d340c80 wpa_cli: WMM_AC_ADDTS and WMM_AC_DELTS commands
wmm_ac_addts command will add (or update) a traffic stream and
wmm_ac_delts command will delete an existing traffic stream.

Each of the above commands will call its corresponding
ctrl_iface command.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:16:03 +02:00
Moshe Benji
eb2f2088aa ctrl_iface: Add wmm_ac_addts and wmm_ac_delts commands
wmm_ac_addts command will add (or update) a traffic stream and
wmm_ac_delts command will delete an existing traffic stream.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:13:42 +02:00
Eliad Peller
1b640fd27c Add str_token() function
Add helper function to get the next token from a string.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 21:11:23 +02:00
Moshe Benji
d1f880013a WMM AC: Handle TSPEC action frames
Add the TSPEC to the driver on successful TSPEC ADDTS response. Delete
the TSPEC when receiving DELTS action.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:07:08 +02:00
Eliad Peller
674f6c073f WMM AC: Add basic ADDTS/DELTS sending functions
Add basic implementation for ADDTS and DELTS sending
functions.

wpas_wmm_ac_addts() will send ADDTS request public action,
containing TSPEC (traffic stream specification) with
the given params.

wpas_wmm_ac_delts() will look for the saved tspec with
the given tid, and send DELTS public action for it.

(Handling of ADDTS response and actually configuring the admission
control params will be added in following patches.)

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:03:56 +02:00
Moshe Benji
471cd6e10c WMM AC: Add add_tx_ts and del_tx_ts driver ops
Add add_tx_ts() and del_tx_ts() ops to notify the driver about
TSPEC add / delete.

Additionally, add wmm_ac_supported flag to indicate
whether the driver supports WMM AC.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 20:47:36 +02:00
Moshe Benji
a0413b1734 WMM AC: Parse WMM IE on association
Initialize WMM AC data structures upon successful association
with an AP that publishes WMM support, and deinitialize the data
structure when the association is no longer valid.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 20:47:34 +02:00
Eliad Peller
7e0e10693a nl80211: Parse WMM parameters on association
Set the relevant WMM parameters in the assoc_data event.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 20:19:04 +02:00
Eliad Peller
0f14a44e6b drivers: Add WMM parameters to association event data
The WMM parameters will be used later for setting default tspec values.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 20:16:58 +02:00
Jouni Malinen
d308d1a899 Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-11-11.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 20:08:00 +02:00
Masashi Honma
e609679984 mesh: Make plink params configurable
This patch makes four MIB variables for plink configurable and sets the
correct default values based on IEEE Std 802.11s-2011.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-16 19:43:11 +02:00
Masashi Honma
0c6099f31b mesh: Check mesh key management method
Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-16 19:43:11 +02:00
Masashi Honma
44a1662a50 mesh: Add wpa_cli action script processing for mesh events
Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-16 19:43:11 +02:00
Masashi Honma
790709060d mesh: Add scan result for mesh network
Android 4.4 uses "BSS" command instead of "SCAN_RESULT" command.
So this patch add the mesh scan result for BSS command.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-16 19:43:11 +02:00
Masashi Honma
2b2bb5a8b9 mesh: Make BSSBasicRateSet configurable
STAs that have different BSSBasicRateSet cannot connect to each other
as per IEEE 802.11s-2011 9.6.0c1:

"A mesh STA shall not establish a mesh peering with a mesh STA using a
different BSSBasicRateSet."

Make BSSBasicRateSet configurable to improve interoperability with other
stations.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-16 19:43:11 +02:00
Javier Lopez
603a3f34c4 Add mesh_group_{add,remove} control interface commands
Parse MESH_GROUP_ADD/REMOVE commands on ctrl interface and call
wpa_supplicant routines. These commands are used to start or
join and leave a mesh network.

The mesh id is given in the configuration file, therefore there is
no need to scan before joining a mesh network. We reuse the
connect_without_scan construct used by P2P for that same purpose.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
2014-11-16 19:43:11 +02:00
Masashi Honma
798b318223 mesh: Reduce none 11N Self-protected Action frame allocation size
Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-16 19:43:11 +02:00
Masashi Honma
9204e73831 mesh: Fix 11N capability in Self-protected Action frame
mesh_ht_mode default value is CHAN_UNDEFINED.
So previous code set 11N capability even though 11N is not used.

Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-16 19:43:11 +02:00
Masashi Honma
edfefaed3c mesh: Set driver capability flags to mesh interface
Signed-off-by: Kenzoh Nishikawa <Kenzoh.Nishikawa@jp.sony.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-16 19:43:11 +02:00
Masashi Honma
eac0231642 mesh: Fix segmentation fault by repeating MESH_GROUP_ADD/REMOVE
Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-16 19:43:11 +02:00