fragattacks/tests/hwsim/test_sae_pk.py
Jouni Malinen f0704e7273 tests: Clean up SAE-PK parameter use
Use the global variables instead of copies of same values.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-10 12:47:07 +03:00

361 lines
13 KiB
Python

# Test cases for SAE-PK
# Copyright (c) 2020, The Linux Foundation
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
import hostapd
from utils import *
SAE_PK_SSID = "SAE-PK test"
SAE_PK_SEC2_PW = "dwxm-zv66-p5ue"
SAE_PK_SEC2_PW_FULL = "dwxm-zv66-p5ue-fotp-owjy-lfby-2xpg-vmwq-chtz-hilu-m3t2-qleg"
SAE_PK_SEC2_M = "431ff8322f93b9dc50ded9f3d14ace22"
SAE_PK_19_PK = "MHcCAQEEIAJIGlfnteonDb7rQyP/SGQjwzrZAnfrXIm4280VWajYoAoGCCqGSM49AwEHoUQDQgAEeRkstKQV+FSAMqBayqFknn2nAQsdsh/MhdX6tiHOTAFin/sUMFRMyspPtIu7YvlKdsexhI0jPVhaYZn1jKWhZg=="
SAE_PK_20_PW = "f3bh-5un3-wz7o-al3p"
SAE_PK_20_M = "50bf37ba0033ed110a74e3a7aa52f4e9"
SAE_PK_20_PK = "MIGkAgEBBDA4wpA6w/fK0g3a2V6QmcoxNoFCVuQPyzWvKYimJkgXsVsXt2ERXQ7dGOVXeycM5DqgBwYFK4EEACKhZANiAARTdszGBNe2PGCnc8Wvs+IDvdVEf4PPBrty0meRZf6UTbGouquTHpy6KKTq5sxrulYzsQFimg4op0UJBGxAzqo0EtTgMlLiBvY0I3Nl3N69MhWo8nvnmguvGGN32AAPXpQ="
def run_sae_pk(apdev, dev, ssid, pw, m, pk, ap_groups=None):
params = hostapd.wpa2_params(ssid=ssid)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = ['%s|pk=%s:%s' % (pw, m, pk)]
if ap_groups:
params['sae_groups'] = ap_groups
hapd = hostapd.add_ap(apdev, params)
bssid = hapd.own_addr()
dev.connect(ssid, sae_password=pw, key_mgmt="SAE", scan_freq="2412")
bss = dev.get_bss(bssid)
if 'flags' not in bss:
raise Exception("Could not get BSS flags from BSS table")
if "[SAE-H2E]" not in bss['flags'] or "[SAE-PK]" not in bss['flags']:
raise Exception("Unexpected BSS flags: " + bss['flags'])
status = dev.get_status()
if "sae_h2e" not in status or "sae_pk" not in status or \
status["sae_h2e"] != "1" or status["sae_pk"] != "1":
raise Exception("SAE-PK or H2E not indicated in STATUS")
dev.request("REMOVE_NETWORK *")
dev.wait_disconnected()
hapd.disable()
def test_sae_pk(dev, apdev):
"""SAE-PK"""
check_sae_pk_capab(dev[0])
dev[0].flush_scan_cache()
dev[0].set("sae_groups", "")
for i in range(14, len(SAE_PK_SEC2_PW_FULL) + 1):
p = SAE_PK_SEC2_PW_FULL[:i]
if p.endswith('-'):
continue
run_sae_pk(apdev[0], dev[0], SAE_PK_SSID, p, SAE_PK_SEC2_M,
SAE_PK_19_PK)
def test_sae_pk_group_negotiation(dev, apdev):
"""SAE-PK"""
check_sae_pk_capab(dev[0])
dev[0].flush_scan_cache()
dev[0].set("sae_groups", "20 19")
try:
run_sae_pk(apdev[0], dev[0], SAE_PK_SSID, SAE_PK_SEC2_PW,
SAE_PK_SEC2_M, SAE_PK_19_PK, ap_groups="19 20")
finally:
dev[0].set("sae_groups", "")
def test_sae_pk_sec_2(dev, apdev):
"""SAE-PK with Sec 2"""
check_sae_pk_capab(dev[0])
dev[0].flush_scan_cache()
dev[0].set("sae_groups", "")
run_sae_pk(apdev[0], dev[0], SAE_PK_SSID, SAE_PK_SEC2_PW,
SAE_PK_SEC2_M, SAE_PK_19_PK)
def test_sae_pk_sec_3(dev, apdev):
"""SAE-PK with Sec 3"""
check_sae_pk_capab(dev[0])
dev[0].flush_scan_cache()
dev[0].set("sae_groups", "")
pw = "iian-qey6-pu5t"
m = "128e51ddb5e2e24388f9ed14b687e2eb"
run_sae_pk(apdev[0], dev[0], SAE_PK_SSID, pw, m, SAE_PK_19_PK)
def test_sae_pk_sec_4(dev, apdev):
"""SAE-PK with Sec 4"""
check_sae_pk_capab(dev[0])
dev[0].flush_scan_cache()
dev[0].set("sae_groups", "")
pw = "ssko-2lmu-7hzs-bqct"
m = "a5e38c7251ea310cc348fbcdadfa8bcb"
run_sae_pk(apdev[0], dev[0], SAE_PK_SSID, pw, m, SAE_PK_19_PK)
def test_sae_pk_sec_5(dev, apdev):
"""SAE-PK with Sec 5"""
check_sae_pk_capab(dev[0])
dev[0].flush_scan_cache()
dev[0].set("sae_groups", "")
pw = "3qqu-f4xq-dz37-fes3-fbgc"
m = "d2e5fa27d1be8897f987f2d480d2af6b"
run_sae_pk(apdev[0], dev[0], SAE_PK_SSID, pw, m, SAE_PK_19_PK)
def test_sae_pk_group_20(dev, apdev):
"""SAE-PK with group 20"""
check_sae_pk_capab(dev[0])
dev[0].flush_scan_cache()
dev[0].set("sae_groups", "20")
try:
run_sae_pk(apdev[0], dev[0], SAE_PK_SSID, SAE_PK_20_PW,
SAE_PK_20_M, SAE_PK_20_PK, ap_groups="20")
finally:
dev[0].set("sae_groups", "")
def test_sae_pk_group_20_sae_group_19(dev, apdev):
"""SAE-PK with group 20 with SAE group 19"""
check_sae_pk_capab(dev[0])
dev[0].flush_scan_cache()
dev[0].set("sae_groups", "19")
try:
run_sae_pk(apdev[0], dev[0], SAE_PK_SSID, SAE_PK_20_PW,
SAE_PK_20_M, SAE_PK_20_PK, ap_groups="19")
finally:
dev[0].set("sae_groups", "")
def test_sae_pk_group_20_sae_group_21(dev, apdev):
"""SAE-PK with group 20 with SAE group 21"""
check_sae_pk_capab(dev[0])
dev[0].flush_scan_cache()
dev[0].set("sae_groups", "21")
try:
run_sae_pk(apdev[0], dev[0], SAE_PK_SSID, SAE_PK_20_PW,
SAE_PK_20_M, SAE_PK_20_PK, ap_groups="21")
finally:
dev[0].set("sae_groups", "")
def test_sae_pk_group_19_sae_group_20(dev, apdev):
"""SAE-PK with group 19 with SAE group 20"""
check_sae_pk_capab(dev[0])
dev[0].flush_scan_cache()
dev[0].set("sae_groups", "20")
try:
run_sae_pk(apdev[0], dev[0], SAE_PK_SSID, SAE_PK_SEC2_PW,
SAE_PK_SEC2_M, SAE_PK_19_PK, ap_groups="20")
finally:
dev[0].set("sae_groups", "")
def test_sae_pk_password_without_pk(dev, apdev):
"""SAE-PK password but not SAE-PK on the AP"""
check_sae_pk_capab(dev[0])
dev[0].set("sae_groups", "")
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = SAE_PK_SEC2_PW
hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect(SAE_PK_SSID, sae_password=SAE_PK_SEC2_PW,
key_mgmt="SAE", scan_freq="2412")
if dev[0].get_status_field("sae_pk") != "0":
raise Exception("Unexpected sae_pk STATUS value")
def test_sae_pk_only(dev, apdev):
"""SAE-PK only"""
check_sae_pk_capab(dev[0])
dev[0].set("sae_groups", "")
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = SAE_PK_SEC2_PW
hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect(SAE_PK_SSID, sae_password=SAE_PK_SEC2_PW,
key_mgmt="SAE", sae_pk="1",
scan_freq="2412", wait_connect=False)
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED",
"CTRL-EVENT-NETWORK-NOT-FOUND"], timeout=10)
if ev is None:
raise Exception("No result for the connection attempt")
if "CTRL-EVENT-CONNECTED" in ev:
raise Exception("Unexpected connection without SAE-PK")
dev[0].request("DISCONNECT")
dev[0].dump_monitor()
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = ['%s|pk=%s:%s' % (SAE_PK_SEC2_PW, SAE_PK_SEC2_M,
SAE_PK_19_PK)]
hapd2 = hostapd.add_ap(apdev[1], params)
bssid2 = hapd2.own_addr()
dev[0].scan_for_bss(bssid2, freq=2412, force_scan=True)
dev[0].request("RECONNECT")
ev = dev[0].wait_connected()
if bssid2 not in ev:
raise Exception("Unexpected connection BSSID")
if dev[0].get_status_field("sae_pk") != "1":
raise Exception("SAE-PK was not used")
def test_sae_pk_modes(dev, apdev):
"""SAE-PK modes"""
check_sae_pk_capab(dev[0])
dev[0].set("sae_groups", "")
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params["ieee80211w"] = "2"
params['sae_password'] = ['%s|pk=%s:%s' % (SAE_PK_SEC2_PW, SAE_PK_SEC2_M,
SAE_PK_19_PK)]
hapd = hostapd.add_ap(apdev[0], params)
tests = [(2, 0), (1, 1), (0, 1)]
for sae_pk, expected in tests:
dev[0].connect(SAE_PK_SSID, sae_password=SAE_PK_SEC2_PW,
key_mgmt="SAE", sae_pk=str(sae_pk), ieee80211w="2",
scan_freq="2412")
val = dev[0].get_status_field("sae_pk")
if val != str(expected):
raise Exception("Unexpected sae_pk=%d result %s" % (sae_pk, val))
dev[0].request("REMOVE_NETWORK *")
dev[0].wait_disconnected()
dev[0].dump_monitor()
def test_sae_pk_not_on_ap(dev, apdev):
"""SAE-PK password, but no PK on AP"""
check_sae_pk_capab(dev[0])
dev[0].set("sae_groups", "")
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = SAE_PK_SEC2_PW
hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect(SAE_PK_SSID, sae_password=SAE_PK_SEC2_PW,
key_mgmt="SAE", scan_freq="2412")
if dev[0].get_status_field("sae_pk") == "1":
raise Exception("SAE-PK was claimed to be used")
def test_sae_pk_transition_disable(dev, apdev):
"""SAE-PK transition disable indication"""
check_sae_pk_capab(dev[0])
dev[0].set("sae_groups", "")
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = ['%s|pk=%s:%s' % (SAE_PK_SEC2_PW, SAE_PK_SEC2_M,
SAE_PK_19_PK)]
params['transition_disable'] = '0x02'
hapd = hostapd.add_ap(apdev[0], params)
id = dev[0].connect(SAE_PK_SSID, sae_password=SAE_PK_SEC2_PW,
key_mgmt="SAE", scan_freq="2412")
ev = dev[0].wait_event(["TRANSITION-DISABLE"], timeout=1)
if ev is None:
raise Exception("Transition disable not indicated")
if ev.split(' ')[1] != "02":
raise Exception("Unexpected transition disable bitmap: " + ev)
val = dev[0].get_network(id, "sae_pk")
if val != "1":
raise Exception("Unexpected sae_pk value: " + str(val))
def test_sae_pk_mixed(dev, apdev):
"""SAE-PK mixed deployment"""
check_sae_pk_capab(dev[0])
dev[0].set("sae_groups", "")
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = SAE_PK_SEC2_PW
hapd = hostapd.add_ap(apdev[0], params)
bssid = hapd.own_addr()
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = ['%s|pk=%s:%s' % (SAE_PK_SEC2_PW, SAE_PK_SEC2_M,
SAE_PK_19_PK)]
# Disable HT from the SAE-PK BSS to make the station prefer the other BSS
# by default.
params['ieee80211n'] = '0'
hapd2 = hostapd.add_ap(apdev[1], params)
bssid2 = hapd2.own_addr()
dev[0].scan_for_bss(bssid, freq=2412)
dev[0].scan_for_bss(bssid2, freq=2412)
dev[0].connect(SAE_PK_SSID, sae_password=SAE_PK_SEC2_PW,
key_mgmt="SAE", scan_freq="2412")
if dev[0].get_status_field("sae_pk") != "1":
raise Exception("SAE-PK was not used")
if dev[0].get_status_field("bssid") != bssid2:
raise Exception("Unexpected BSSID selected")
def check_sae_pk_sta_connect_failure(dev):
dev.connect(SAE_PK_SSID, sae_password=SAE_PK_SEC2_PW,
key_mgmt="SAE", scan_freq="2412", wait_connect=False)
ev = dev.wait_event(["CTRL-EVENT-CONNECTED",
"CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10)
if ev is None:
raise Exception("No result for the connection attempt")
if "CTRL-EVENT-CONNECTED" in ev:
raise Exception("Unexpected connection")
def test_sae_pk_missing_ie(dev, apdev):
"""SAE-PK and missing SAE-PK IE in confirm"""
check_sae_pk_capab(dev[0])
dev[0].set("sae_groups", "")
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = ['%s|pk=%s:%s' % (SAE_PK_SEC2_PW, SAE_PK_SEC2_M,
SAE_PK_19_PK)]
params['sae_pk_omit'] = '1'
hapd = hostapd.add_ap(apdev[0], params)
check_sae_pk_sta_connect_failure(dev[0])
def test_sae_pk_unexpected_status(dev, apdev):
"""SAE-PK and unexpected status code in commit"""
check_sae_pk_capab(dev[0])
dev[0].set("sae_groups", "")
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = ['%s|pk=%s:%s' % (SAE_PK_SEC2_PW, SAE_PK_SEC2_M,
SAE_PK_19_PK)]
params['sae_commit_status'] = '126'
hapd = hostapd.add_ap(apdev[0], params)
check_sae_pk_sta_connect_failure(dev[0])
def test_sae_pk_invalid_signature(dev, apdev):
"""SAE-PK and invalid signature"""
check_sae_pk_capab(dev[0])
dev[0].set("sae_groups", "")
other = "MHcCAQEEILw+nTjFzRyhVea0G6KbwZu18oWrfhzppxj+MceUO3YLoAoGCCqGSM49AwEHoUQDQgAELdou6LuTDNiMVlMB65KsWhQFbPXR9url0EA6luWzUfAuGoDXYJUBTVz6Nv3mz6oQcDrSiDmz/LejndJ0YHGgfQ=="
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = ['%s|pk=%s:%s:%s' % (SAE_PK_SEC2_PW, SAE_PK_SEC2_M,
SAE_PK_19_PK, other)]
hapd = hostapd.add_ap(apdev[0], params)
check_sae_pk_sta_connect_failure(dev[0])
def test_sae_pk_invalid_fingerprint(dev, apdev):
"""SAE-PK and invalid fingerprint"""
check_sae_pk_capab(dev[0])
dev[0].set("sae_groups", "")
other = "431ff8322f93b9dc50ded9f3d14ace21"
params = hostapd.wpa2_params(ssid=SAE_PK_SSID)
params['wpa_key_mgmt'] = 'SAE'
params['sae_password'] = ['%s|pk=%s:%s' % (SAE_PK_SEC2_PW, other,
SAE_PK_19_PK)]
hapd = hostapd.add_ap(apdev[0], params)
check_sae_pk_sta_connect_failure(dev[0])