Jouni Malinen 25ef8529c1 P2P: Add support for IP address assignment in 4-way handshake ... This new mechanism allows P2P Client to request an IPv4 address from the GO as part of the 4-way handshake to avoid use of DHCP exchange after 4-way handshake. If the new mechanism is used, the assigned IP address is shown in the P2P-GROUP-STARTED event on the client side with following new parameters: ip_addr, ip_mask, go_ip_addr. The assigned IP address is included in the AP-STA-CONNECTED event on the GO side as a new ip_addr parameter. The IP address is valid for the duration of the association. The IP address pool for this new mechanism is configured as global wpa_supplicant configuration file parameters ip_addr_go, ip_addr_mask, ip_addr_star, ip_addr_end. For example: ip_addr_go=192.168.42.1 ip_addr_mask=255.255.255.0 ip_addr_start=192.168.42.2 ip_addr_end=192.168.42.100 DHCP mechanism is expected to be enabled at the same time to support P2P Devices that do not use the new mechanism. The easiest way of managing the IP addresses is by splitting the IP address range into two parts and assign a separate range for wpa_supplicant and DHCP server. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>		2014-01-27 21:44:26 +02:00
..
p2p	P2P: Add D-Bus python script to perform Disconnect	2012-08-05 00:24:40 +03:00
60_wpa_supplicant	Do not inhibit suspend even if wpa_cli command fails	2010-02-27 20:03:13 +02:00
dbus-listen-preq.py	DBus: Add ability to report probe requests	2012-04-01 21:14:48 +03:00
ieee8021x.conf	Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release	2008-02-27 17:34:43 -08:00
openCryptoki.conf	Example configuration for EAP-TLS authentication using PKCS#11 TPM token	2008-05-23 19:41:05 +03:00
p2p-action-udhcp.sh	P2P: Add an example p2p-action script for udhcpc/udhcpd	2010-09-09 07:17:21 -07:00
p2p-action.sh	P2P: Add support for IP address assignment in 4-way handshake	2014-01-27 21:44:26 +02:00
plaintext.conf	Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release	2008-02-27 17:34:43 -08:00
udhcpd-p2p.conf	Fix typos found by codespell	2011-09-22 00:43:59 +03:00
wep.conf	Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release	2008-02-27 17:34:43 -08:00
wpa2-eap-ccmp.conf	Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release	2008-02-27 17:34:43 -08:00
wpa-psk-tkip.conf	Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release	2008-02-27 17:34:43 -08:00
wpas-dbus-new-getall.py	dbus: Change BSS, Network and some errors interface names	2010-01-09 11:41:09 +02:00
wpas-dbus-new-signals.py	Fix BSS property names in the example D-Bus script	2012-01-01 18:55:55 +02:00
wpas-dbus-new-wps.py	dbus: Update example scripts to use PropertiesChanged	2010-01-04 16:34:06 +02:00
wpas-dbus-new.py	dbus: Change WPA/RSNIE byte array props to dicts	2010-01-16 16:37:37 +02:00
wpas-test.py	Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release	2008-02-27 17:34:43 -08:00
wps-ap-cli	Add example WPS AP mode UI for wpa_supplicant	2011-12-01 22:14:07 +02:00
wps-nfc.py	NFC: Add no waiting and no multiple operations options for scripts	2013-04-27 22:15:23 +03:00