mirror of
https://github.com/vanhoefm/fragattacks.git
synced 2024-11-28 18:28:23 -05:00
8e416cecdb
The decrypted copy of a GTK from EAPOL-Key is cleared from memory only after having sent out CTRL-EVENT-CONNECTED. As such, there was a race condition on the test case reading the wpa_supplicant process memory after the connection. This was unlikely to occur due to the one second sleep, but even with that, it would be at least theorically possible to hit this race under heavy load (e.g., when using large number of VMs to run parallel testing). Avoid this by running a PING command to make sure wpa_supplicant has returned to eloop before reading the process memory. This should make it less likely to report false positives on GTK being found in memory. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2195 lines
88 KiB
Python
2195 lines
88 KiB
Python
# WPA2-Personal tests
|
|
# Copyright (c) 2014, Qualcomm Atheros, Inc.
|
|
#
|
|
# This software may be distributed under the terms of the BSD license.
|
|
# See README for more details.
|
|
|
|
import binascii
|
|
from Crypto.Cipher import AES
|
|
import hashlib
|
|
import hmac
|
|
import logging
|
|
logger = logging.getLogger()
|
|
import os
|
|
import re
|
|
import struct
|
|
import subprocess
|
|
import time
|
|
|
|
import hostapd
|
|
from utils import HwsimSkip, fail_test, skip_with_fips
|
|
import hwsim_utils
|
|
from wpasupplicant import WpaSupplicant
|
|
|
|
def check_mib(dev, vals):
|
|
mib = dev.get_mib()
|
|
for v in vals:
|
|
if mib[v[0]] != v[1]:
|
|
raise Exception("Unexpected {} = {} (expected {})".format(v[0], mib[v[0]], v[1]))
|
|
|
|
def test_ap_wpa2_psk(dev, apdev):
|
|
"""WPA2-PSK AP with PSK instead of passphrase"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
params = hostapd.wpa2_params(ssid=ssid)
|
|
params['wpa_psk'] = psk
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "WPA-PSK":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
dev[0].connect(ssid, raw_psk=psk, scan_freq="2412")
|
|
dev[1].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
|
|
sig = dev[0].request("SIGNAL_POLL").splitlines()
|
|
pkt = dev[0].request("PKTCNT_POLL").splitlines()
|
|
if "FREQUENCY=2412" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value: " + str(sig))
|
|
if "TXBAD=0" not in pkt:
|
|
raise Exception("Unexpected TXBAD value: " + str(pkt))
|
|
|
|
def test_ap_wpa2_psk_file(dev, apdev):
|
|
"""WPA2-PSK AP with PSK from a file"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_psk_file'] = 'hostapd.wpa_psk'
|
|
hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[1].connect(ssid, psk="very secret", scan_freq="2412", wait_connect=False)
|
|
dev[2].connect(ssid, raw_psk=psk, scan_freq="2412")
|
|
dev[2].request("REMOVE_NETWORK all")
|
|
dev[0].connect(ssid, psk="very secret", scan_freq="2412")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[2].connect(ssid, psk="another passphrase for all STAs", scan_freq="2412")
|
|
dev[0].connect(ssid, psk="another passphrase for all STAs", scan_freq="2412")
|
|
ev = dev[1].wait_event(["WPA: 4-Way Handshake failed"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timed out while waiting for failure report")
|
|
dev[1].request("REMOVE_NETWORK all")
|
|
|
|
def test_ap_wpa2_psk_mem(dev, apdev):
|
|
"""WPA2-PSK AP with passphrase only in memory"""
|
|
try:
|
|
_test_ap_wpa2_psk_mem(dev, apdev)
|
|
finally:
|
|
dev[0].request("SCAN_INTERVAL 5")
|
|
dev[1].request("SCAN_INTERVAL 5")
|
|
|
|
def _test_ap_wpa2_psk_mem(dev, apdev):
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
params = hostapd.wpa2_params(ssid=ssid)
|
|
params['wpa_psk'] = psk
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
|
|
dev[0].connect(ssid, mem_only_psk="1", scan_freq="2412", wait_connect=False)
|
|
dev[0].request("SCAN_INTERVAL 1")
|
|
ev = dev[0].wait_event(["CTRL-REQ-PSK_PASSPHRASE"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Request for PSK/passphrase timed out")
|
|
id = ev.split(':')[0].split('-')[-1]
|
|
dev[0].request("CTRL-RSP-PSK_PASSPHRASE-" + id + ':"' + passphrase + '"')
|
|
dev[0].wait_connected(timeout=10)
|
|
|
|
dev[1].connect(ssid, mem_only_psk="1", scan_freq="2412", wait_connect=False)
|
|
dev[1].request("SCAN_INTERVAL 1")
|
|
ev = dev[1].wait_event(["CTRL-REQ-PSK_PASSPHRASE"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Request for PSK/passphrase timed out(2)")
|
|
id = ev.split(':')[0].split('-')[-1]
|
|
dev[1].request("CTRL-RSP-PSK_PASSPHRASE-" + id + ':' + psk)
|
|
dev[1].wait_connected(timeout=10)
|
|
|
|
def test_ap_wpa2_ptk_rekey(dev, apdev):
|
|
"""WPA2-PSK AP and PTK rekey enforced by station"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, wpa_ptk_rekey="1", scan_freq="2412")
|
|
ev = dev[0].wait_event(["WPA: Key negotiation completed"])
|
|
if ev is None:
|
|
raise Exception("PTK rekey timed out")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_wpa2_ptk_rekey_ap(dev, apdev):
|
|
"""WPA2-PSK AP and PTK rekey enforced by AP"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_ptk_rekey'] = '2'
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
ev = dev[0].wait_event(["WPA: Key negotiation completed"])
|
|
if ev is None:
|
|
raise Exception("PTK rekey timed out")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_wpa2_sha256_ptk_rekey(dev, apdev):
|
|
"""WPA2-PSK/SHA256 AKM AP and PTK rekey enforced by station"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="WPA-PSK-SHA256",
|
|
wpa_ptk_rekey="1", scan_freq="2412")
|
|
ev = dev[0].wait_event(["WPA: Key negotiation completed"])
|
|
if ev is None:
|
|
raise Exception("PTK rekey timed out")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-6"),
|
|
("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-6") ])
|
|
|
|
def test_ap_wpa2_sha256_ptk_rekey_ap(dev, apdev):
|
|
"""WPA2-PSK/SHA256 AKM AP and PTK rekey enforced by AP"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
|
|
params['wpa_ptk_rekey'] = '2'
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="WPA-PSK-SHA256",
|
|
scan_freq="2412")
|
|
ev = dev[0].wait_event(["WPA: Key negotiation completed"])
|
|
if ev is None:
|
|
raise Exception("PTK rekey timed out")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-6"),
|
|
("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-6") ])
|
|
|
|
def test_ap_wpa_ptk_rekey(dev, apdev):
|
|
"""WPA-PSK/TKIP AP and PTK rekey enforced by station"""
|
|
skip_with_fips(dev[0])
|
|
ssid = "test-wpa-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, wpa_ptk_rekey="1", scan_freq="2412")
|
|
if "[WPA-PSK-TKIP]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing WPA element info")
|
|
ev = dev[0].wait_event(["WPA: Key negotiation completed"])
|
|
if ev is None:
|
|
raise Exception("PTK rekey timed out")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_wpa_ptk_rekey_ap(dev, apdev):
|
|
"""WPA-PSK/TKIP AP and PTK rekey enforced by AP"""
|
|
skip_with_fips(dev[0])
|
|
ssid = "test-wpa-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa_params(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_ptk_rekey'] = '2'
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("PTK rekey timed out")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_wpa_ccmp(dev, apdev):
|
|
"""WPA-PSK/CCMP"""
|
|
ssid = "test-wpa-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa_params(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_pairwise'] = "CCMP"
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
check_mib(dev[0], [ ("dot11RSNAConfigGroupCipherSize", "128"),
|
|
("dot11RSNAGroupCipherRequested", "00-50-f2-4"),
|
|
("dot11RSNAPairwiseCipherRequested", "00-50-f2-4"),
|
|
("dot11RSNAAuthenticationSuiteRequested", "00-50-f2-2"),
|
|
("dot11RSNAGroupCipherSelected", "00-50-f2-4"),
|
|
("dot11RSNAPairwiseCipherSelected", "00-50-f2-4"),
|
|
("dot11RSNAAuthenticationSuiteSelected", "00-50-f2-2"),
|
|
("dot1xSuppSuppControlledPortStatus", "Authorized") ])
|
|
|
|
def test_ap_wpa2_psk_file(dev, apdev):
|
|
"""WPA2-PSK AP with various PSK file error and success cases"""
|
|
addr0 = dev[0].own_addr()
|
|
addr1 = dev[1].own_addr()
|
|
addr2 = dev[2].own_addr()
|
|
ssid = "psk"
|
|
pskfile = "/tmp/ap_wpa2_psk_file_errors.psk_file"
|
|
try:
|
|
os.remove(pskfile)
|
|
except:
|
|
pass
|
|
|
|
params = { "ssid": ssid, "wpa": "2", "wpa_key_mgmt": "WPA-PSK",
|
|
"rsn_pairwise": "CCMP", "wpa_psk_file": pskfile }
|
|
|
|
try:
|
|
# missing PSK file
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params, no_enable=True)
|
|
if "FAIL" not in hapd.request("ENABLE"):
|
|
raise Exception("Unexpected ENABLE success")
|
|
hapd.request("DISABLE")
|
|
|
|
# invalid MAC address
|
|
with open(pskfile, "w") as f:
|
|
f.write("\n")
|
|
f.write("foo\n")
|
|
if "FAIL" not in hapd.request("ENABLE"):
|
|
raise Exception("Unexpected ENABLE success")
|
|
hapd.request("DISABLE")
|
|
|
|
# no PSK on line
|
|
with open(pskfile, "w") as f:
|
|
f.write("00:11:22:33:44:55\n")
|
|
if "FAIL" not in hapd.request("ENABLE"):
|
|
raise Exception("Unexpected ENABLE success")
|
|
hapd.request("DISABLE")
|
|
|
|
# invalid PSK
|
|
with open(pskfile, "w") as f:
|
|
f.write("00:11:22:33:44:55 1234567\n")
|
|
if "FAIL" not in hapd.request("ENABLE"):
|
|
raise Exception("Unexpected ENABLE success")
|
|
hapd.request("DISABLE")
|
|
|
|
# valid PSK file
|
|
with open(pskfile, "w") as f:
|
|
f.write("00:11:22:33:44:55 12345678\n")
|
|
f.write(addr0 + " 123456789\n")
|
|
f.write(addr1 + " 123456789a\n")
|
|
f.write(addr2 + " 0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef\n")
|
|
if "FAIL" in hapd.request("ENABLE"):
|
|
raise Exception("Unexpected ENABLE failure")
|
|
|
|
dev[0].connect(ssid, psk="123456789", scan_freq="2412")
|
|
dev[1].connect(ssid, psk="123456789a", scan_freq="2412")
|
|
dev[2].connect(ssid, raw_psk="0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef", scan_freq="2412")
|
|
|
|
finally:
|
|
try:
|
|
os.remove(pskfile)
|
|
except:
|
|
pass
|
|
|
|
def test_ap_wpa2_psk_wildcard_ssid(dev, apdev):
|
|
"""WPA2-PSK AP and wildcard SSID configuration"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect("", bssid=apdev[0]['bssid'], psk=passphrase,
|
|
scan_freq="2412")
|
|
dev[1].connect("", bssid=apdev[0]['bssid'], raw_psk=psk, scan_freq="2412")
|
|
|
|
def test_ap_wpa2_gtk_rekey(dev, apdev):
|
|
"""WPA2-PSK AP and GTK rekey enforced by AP"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_group_rekey'] = '1'
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
ev = dev[0].wait_event(["WPA: Group rekeying completed"], timeout=2)
|
|
if ev is None:
|
|
raise Exception("GTK rekey timed out")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_wpa_gtk_rekey(dev, apdev):
|
|
"""WPA-PSK/TKIP AP and GTK rekey enforced by AP"""
|
|
skip_with_fips(dev[0])
|
|
ssid = "test-wpa-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa_params(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_group_rekey'] = '1'
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
ev = dev[0].wait_event(["WPA: Group rekeying completed"], timeout=2)
|
|
if ev is None:
|
|
raise Exception("GTK rekey timed out")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_wpa2_gmk_rekey(dev, apdev):
|
|
"""WPA2-PSK AP and GMK and GTK rekey enforced by AP"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_group_rekey'] = '1'
|
|
params['wpa_gmk_rekey'] = '2'
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
for i in range(0, 3):
|
|
ev = dev[0].wait_event(["WPA: Group rekeying completed"], timeout=2)
|
|
if ev is None:
|
|
raise Exception("GTK rekey timed out")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_wpa2_strict_rekey(dev, apdev):
|
|
"""WPA2-PSK AP and strict GTK rekey enforced by AP"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_strict_rekey'] = '1'
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
dev[1].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
dev[1].request("DISCONNECT")
|
|
ev = dev[0].wait_event(["WPA: Group rekeying completed"], timeout=2)
|
|
if ev is None:
|
|
raise Exception("GTK rekey timed out")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_wpa2_bridge_fdb(dev, apdev):
|
|
"""Bridge FDB entry removal"""
|
|
try:
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = "12345678"
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
params['bridge'] = 'ap-br0'
|
|
hostapd.add_ap(apdev[0]['ifname'], params)
|
|
subprocess.call(['brctl', 'setfd', 'ap-br0', '0'])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'up'])
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412",
|
|
bssid=apdev[0]['bssid'])
|
|
dev[1].connect(ssid, psk=passphrase, scan_freq="2412",
|
|
bssid=apdev[0]['bssid'])
|
|
addr0 = dev[0].p2p_interface_addr()
|
|
hwsim_utils.test_connectivity_sta(dev[0], dev[1])
|
|
cmd = subprocess.Popen(['brctl', 'showmacs', 'ap-br0'],
|
|
stdout=subprocess.PIPE)
|
|
macs1 = cmd.stdout.read()
|
|
cmd = subprocess.call(['brctl', 'setageing', 'ap-br0', '1'])
|
|
dev[0].request("DISCONNECT")
|
|
dev[1].request("DISCONNECT")
|
|
time.sleep(1)
|
|
cmd = subprocess.Popen(['brctl', 'showmacs', 'ap-br0'],
|
|
stdout=subprocess.PIPE)
|
|
macs2 = cmd.stdout.read()
|
|
|
|
addr1 = dev[1].p2p_interface_addr()
|
|
if addr0 not in macs1 or addr1 not in macs1:
|
|
raise Exception("Bridge FDB entry missing")
|
|
if addr0 in macs2 or addr1 in macs2:
|
|
raise Exception("Bridge FDB entry was not removed")
|
|
finally:
|
|
subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'down'])
|
|
subprocess.call(['brctl', 'delbr', 'ap-br0'])
|
|
|
|
def test_ap_wpa2_already_in_bridge(dev, apdev):
|
|
"""hostapd behavior with interface already in bridge"""
|
|
ifname = apdev[0]['ifname']
|
|
br_ifname = 'ext-ap-br0'
|
|
try:
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = "12345678"
|
|
subprocess.call(['brctl', 'addbr', br_ifname])
|
|
subprocess.call(['brctl', 'setfd', br_ifname, '0'])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'up'])
|
|
subprocess.call(['iw', ifname, 'set', 'type', '__ap'])
|
|
subprocess.call(['brctl', 'addif', br_ifname, ifname])
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(ifname, params)
|
|
if hapd.get_driver_status_field('brname') != br_ifname:
|
|
raise Exception("Bridge name not identified correctly")
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
finally:
|
|
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'down'])
|
|
subprocess.call(['brctl', 'delif', br_ifname, ifname])
|
|
subprocess.call(['iw', ifname, 'set', 'type', 'station'])
|
|
subprocess.call(['brctl', 'delbr', br_ifname])
|
|
|
|
def test_ap_wpa2_in_different_bridge(dev, apdev):
|
|
"""hostapd behavior with interface in different bridge"""
|
|
ifname = apdev[0]['ifname']
|
|
br_ifname = 'ext-ap-br0'
|
|
try:
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = "12345678"
|
|
subprocess.call(['brctl', 'addbr', br_ifname])
|
|
subprocess.call(['brctl', 'setfd', br_ifname, '0'])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'up'])
|
|
subprocess.call(['iw', ifname, 'set', 'type', '__ap'])
|
|
subprocess.call(['brctl', 'addif', br_ifname, ifname])
|
|
time.sleep(0.5)
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
params['bridge'] = 'ap-br0'
|
|
hapd = hostapd.add_ap(ifname, params)
|
|
subprocess.call(['brctl', 'setfd', 'ap-br0', '0'])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'up'])
|
|
brname = hapd.get_driver_status_field('brname')
|
|
if brname != 'ap-br0':
|
|
raise Exception("Incorrect bridge: " + brname)
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
hwsim_utils.test_connectivity_iface(dev[0], hapd, "ap-br0")
|
|
if hapd.get_driver_status_field("added_bridge") != "1":
|
|
raise Exception("Unexpected added_bridge value")
|
|
if hapd.get_driver_status_field("added_if_into_bridge") != "1":
|
|
raise Exception("Unexpected added_if_into_bridge value")
|
|
dev[0].request("DISCONNECT")
|
|
hapd.disable()
|
|
finally:
|
|
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'down'])
|
|
subprocess.call(['brctl', 'delif', br_ifname, ifname],
|
|
stderr=open('/dev/null', 'w'))
|
|
subprocess.call(['brctl', 'delbr', br_ifname])
|
|
|
|
def test_ap_wpa2_ext_add_to_bridge(dev, apdev):
|
|
"""hostapd behavior with interface added to bridge externally"""
|
|
ifname = apdev[0]['ifname']
|
|
br_ifname = 'ext-ap-br0'
|
|
try:
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = "12345678"
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(ifname, params)
|
|
|
|
subprocess.call(['brctl', 'addbr', br_ifname])
|
|
subprocess.call(['brctl', 'setfd', br_ifname, '0'])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'up'])
|
|
subprocess.call(['brctl', 'addif', br_ifname, ifname])
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
if hapd.get_driver_status_field('brname') != br_ifname:
|
|
raise Exception("Bridge name not identified correctly")
|
|
finally:
|
|
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'down'])
|
|
subprocess.call(['brctl', 'delif', br_ifname, ifname])
|
|
subprocess.call(['brctl', 'delbr', br_ifname])
|
|
|
|
def test_ap_wpa2_psk_ext(dev, apdev):
|
|
"""WPA2-PSK AP using external EAPOL I/O"""
|
|
bssid = apdev[0]['bssid']
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
params = hostapd.wpa2_params(ssid=ssid)
|
|
params['wpa_psk'] = psk
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
hapd.request("SET ext_eapol_frame_io 1")
|
|
dev[0].request("SET ext_eapol_frame_io 1")
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412", wait_connect=False)
|
|
addr = dev[0].p2p_interface_addr()
|
|
while True:
|
|
ev = hapd.wait_event(["EAPOL-TX", "AP-STA-CONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from hostapd")
|
|
if "AP-STA-CONNECTED" in ev:
|
|
dev[0].wait_connected(timeout=15)
|
|
break
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to wpa_supplicant failed")
|
|
ev = dev[0].wait_event(["EAPOL-TX", "CTRL-EVENT-CONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from wpa_supplicant")
|
|
if "CTRL-EVENT-CONNECTED" in ev:
|
|
break
|
|
res = hapd.request("EAPOL_RX " + addr + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to hostapd failed")
|
|
|
|
def test_ap_wpa2_psk_ext_retry_msg_3(dev, apdev):
|
|
"""WPA2-PSK AP using external EAPOL I/O and retry for EAPOL-Key msg 3/4"""
|
|
bssid = apdev[0]['bssid']
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
params = hostapd.wpa2_params(ssid=ssid)
|
|
params['wpa_psk'] = psk
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
hapd.request("SET ext_eapol_frame_io 1")
|
|
dev[0].request("SET ext_eapol_frame_io 1")
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412", wait_connect=False)
|
|
addr = dev[0].p2p_interface_addr()
|
|
|
|
# EAPOL-Key msg 1/4
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from hostapd")
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to wpa_supplicant failed")
|
|
|
|
# EAPOL-Key msg 2/4
|
|
ev = dev[0].wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from wpa_supplicant")
|
|
res = hapd.request("EAPOL_RX " + addr + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to hostapd failed")
|
|
|
|
# EAPOL-Key msg 3/4
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from hostapd")
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to wpa_supplicant failed")
|
|
|
|
# EAPOL-Key msg 4/4
|
|
ev = dev[0].wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from wpa_supplicant")
|
|
# Do not send to the AP
|
|
dev[0].wait_connected(timeout=15)
|
|
|
|
# EAPOL-Key msg 3/4 (retry)
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from hostapd")
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to wpa_supplicant failed")
|
|
|
|
# EAPOL-Key msg 4/4
|
|
ev = dev[0].wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from wpa_supplicant")
|
|
res = hapd.request("EAPOL_RX " + addr + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to hostapd failed")
|
|
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on AP-STA-CONNECTED from hostapd")
|
|
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def parse_eapol(data):
|
|
(version, type, length) = struct.unpack('>BBH', data[0:4])
|
|
payload = data[4:]
|
|
if length > len(payload):
|
|
raise Exception("Invalid EAPOL length")
|
|
if length < len(payload):
|
|
payload = payload[0:length]
|
|
eapol = {}
|
|
eapol['version'] = version
|
|
eapol['type'] = type
|
|
eapol['length'] = length
|
|
eapol['payload'] = payload
|
|
if type == 3:
|
|
# EAPOL-Key
|
|
(eapol['descr_type'],) = struct.unpack('B', payload[0:1])
|
|
payload = payload[1:]
|
|
if eapol['descr_type'] == 2 or eapol['descr_type'] == 254:
|
|
# RSN EAPOL-Key
|
|
(key_info, key_len) = struct.unpack('>HH', payload[0:4])
|
|
eapol['rsn_key_info'] = key_info
|
|
eapol['rsn_key_len'] = key_len
|
|
eapol['rsn_replay_counter'] = payload[4:12]
|
|
eapol['rsn_key_nonce'] = payload[12:44]
|
|
eapol['rsn_key_iv'] = payload[44:60]
|
|
eapol['rsn_key_rsc'] = payload[60:68]
|
|
eapol['rsn_key_id'] = payload[68:76]
|
|
eapol['rsn_key_mic'] = payload[76:92]
|
|
payload = payload[92:]
|
|
(eapol['rsn_key_data_len'],) = struct.unpack('>H', payload[0:2])
|
|
payload = payload[2:]
|
|
eapol['rsn_key_data'] = payload
|
|
return eapol
|
|
|
|
def build_eapol(msg):
|
|
data = struct.pack(">BBH", msg['version'], msg['type'], msg['length'])
|
|
if msg['type'] == 3:
|
|
data += struct.pack('>BHH', msg['descr_type'], msg['rsn_key_info'],
|
|
msg['rsn_key_len'])
|
|
data += msg['rsn_replay_counter']
|
|
data += msg['rsn_key_nonce']
|
|
data += msg['rsn_key_iv']
|
|
data += msg['rsn_key_rsc']
|
|
data += msg['rsn_key_id']
|
|
data += msg['rsn_key_mic']
|
|
data += struct.pack('>H', msg['rsn_key_data_len'])
|
|
data += msg['rsn_key_data']
|
|
else:
|
|
data += msg['payload']
|
|
return data
|
|
|
|
def sha1_prf(key, label, data, outlen):
|
|
res = ''
|
|
counter = 0
|
|
while outlen > 0:
|
|
m = hmac.new(key, label, hashlib.sha1)
|
|
m.update(struct.pack('B', 0))
|
|
m.update(data)
|
|
m.update(struct.pack('B', counter))
|
|
counter += 1
|
|
hash = m.digest()
|
|
if outlen > len(hash):
|
|
res += hash
|
|
outlen -= len(hash)
|
|
else:
|
|
res += hash[0:outlen]
|
|
outlen = 0
|
|
return res
|
|
|
|
def pmk_to_ptk(pmk, addr1, addr2, nonce1, nonce2):
|
|
if addr1 < addr2:
|
|
data = binascii.unhexlify(addr1.replace(':','')) + binascii.unhexlify(addr2.replace(':',''))
|
|
else:
|
|
data = binascii.unhexlify(addr2.replace(':','')) + binascii.unhexlify(addr1.replace(':',''))
|
|
if nonce1 < nonce2:
|
|
data += nonce1 + nonce2
|
|
else:
|
|
data += nonce2 + nonce1
|
|
label = "Pairwise key expansion"
|
|
ptk = sha1_prf(pmk, label, data, 48)
|
|
kck = ptk[0:16]
|
|
kek = ptk[16:32]
|
|
return (ptk, kck, kek)
|
|
|
|
def eapol_key_mic(kck, msg):
|
|
msg['rsn_key_mic'] = binascii.unhexlify('00000000000000000000000000000000')
|
|
data = build_eapol(msg)
|
|
m = hmac.new(kck, data, hashlib.sha1)
|
|
msg['rsn_key_mic'] = m.digest()[0:16]
|
|
|
|
def rsn_eapol_key_set(msg, key_info, key_len, nonce, data):
|
|
msg['rsn_key_info'] = key_info
|
|
msg['rsn_key_len'] = key_len
|
|
if nonce:
|
|
msg['rsn_key_nonce'] = nonce
|
|
else:
|
|
msg['rsn_key_nonce'] = binascii.unhexlify('0000000000000000000000000000000000000000000000000000000000000000')
|
|
if data:
|
|
msg['rsn_key_data_len'] = len(data)
|
|
msg['rsn_key_data'] = data
|
|
msg['length'] = 95 + len(data)
|
|
else:
|
|
msg['rsn_key_data_len'] = 0
|
|
msg['rsn_key_data'] = ''
|
|
msg['length'] = 95
|
|
|
|
def recv_eapol(hapd):
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from hostapd")
|
|
eapol = binascii.unhexlify(ev.split(' ')[2])
|
|
return parse_eapol(eapol)
|
|
|
|
def send_eapol(hapd, addr, data):
|
|
res = hapd.request("EAPOL_RX " + addr + " " + binascii.hexlify(data))
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to hostapd failed")
|
|
|
|
def reply_eapol(info, hapd, addr, msg, key_info, nonce, data, kck):
|
|
logger.info("Send EAPOL-Key msg " + info)
|
|
rsn_eapol_key_set(msg, key_info, 0, nonce, data)
|
|
eapol_key_mic(kck, msg)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
def hapd_connected(hapd):
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on AP-STA-CONNECTED from hostapd")
|
|
|
|
def eapol_test(apdev, dev, wpa2=True):
|
|
bssid = apdev['bssid']
|
|
if wpa2:
|
|
ssid = "test-wpa2-psk"
|
|
else:
|
|
ssid = "test-wpa-psk"
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
pmk = binascii.unhexlify(psk)
|
|
if wpa2:
|
|
params = hostapd.wpa2_params(ssid=ssid)
|
|
else:
|
|
params = hostapd.wpa_params(ssid=ssid)
|
|
params['wpa_psk'] = psk
|
|
hapd = hostapd.add_ap(apdev['ifname'], params)
|
|
hapd.request("SET ext_eapol_frame_io 1")
|
|
dev.request("SET ext_eapol_frame_io 1")
|
|
dev.connect(ssid, raw_psk=psk, scan_freq="2412", wait_connect=False)
|
|
addr = dev.p2p_interface_addr()
|
|
if wpa2:
|
|
rsne = binascii.unhexlify('30140100000fac040100000fac040100000fac020000')
|
|
else:
|
|
rsne = binascii.unhexlify('dd160050f20101000050f20201000050f20201000050f202')
|
|
snonce = binascii.unhexlify('1111111111111111111111111111111111111111111111111111111111111111')
|
|
return (bssid,ssid,hapd,snonce,pmk,addr,rsne)
|
|
|
|
def test_ap_wpa2_psk_ext_eapol(dev, apdev):
|
|
"""WPA2-PSK AP using external EAPOL supplicant"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
msg = recv_eapol(hapd)
|
|
anonce = msg['rsn_key_nonce']
|
|
logger.info("Replay same data back")
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.info("Truncated Key Data in EAPOL-Key msg 2/4")
|
|
rsn_eapol_key_set(msg, 0x0101, 0, snonce, rsne)
|
|
msg['length'] = 95 + 22 - 1
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
reply_eapol("2/4", hapd, addr, msg, 0x010a, snonce, rsne, kck)
|
|
|
|
msg = recv_eapol(hapd)
|
|
if anonce != msg['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
logger.info("Replay same data back")
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
|
|
hapd_connected(hapd)
|
|
|
|
def test_ap_wpa2_psk_ext_eapol_retry1(dev, apdev):
|
|
"""WPA2 4-way handshake with EAPOL-Key 1/4 retransmitted"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
msg1 = recv_eapol(hapd)
|
|
anonce = msg1['rsn_key_nonce']
|
|
|
|
msg2 = recv_eapol(hapd)
|
|
if anonce != msg2['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.info("Send EAPOL-Key msg 2/4")
|
|
msg = msg2
|
|
rsn_eapol_key_set(msg, 0x010a, 0, snonce, rsne)
|
|
eapol_key_mic(kck, msg)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
msg = recv_eapol(hapd)
|
|
if anonce != msg['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
|
|
reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
|
|
hapd_connected(hapd)
|
|
|
|
def test_ap_wpa2_psk_ext_eapol_retry1b(dev, apdev):
|
|
"""WPA2 4-way handshake with EAPOL-Key 1/4 and 2/4 retransmitted"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
msg1 = recv_eapol(hapd)
|
|
anonce = msg1['rsn_key_nonce']
|
|
msg2 = recv_eapol(hapd)
|
|
if anonce != msg2['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
reply_eapol("2/4 (a)", hapd, addr, msg1, 0x010a, snonce, rsne, kck)
|
|
reply_eapol("2/4 (b)", hapd, addr, msg2, 0x010a, snonce, rsne, kck)
|
|
|
|
msg = recv_eapol(hapd)
|
|
if anonce != msg['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
|
|
reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
|
|
hapd_connected(hapd)
|
|
|
|
def test_ap_wpa2_psk_ext_eapol_retry1c(dev, apdev):
|
|
"""WPA2 4-way handshake with EAPOL-Key 1/4 and 2/4 retransmitted and SNonce changing"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
msg1 = recv_eapol(hapd)
|
|
anonce = msg1['rsn_key_nonce']
|
|
|
|
msg2 = recv_eapol(hapd)
|
|
if anonce != msg2['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
reply_eapol("2/4 (a)", hapd, addr, msg1, 0x010a, snonce, rsne, kck)
|
|
|
|
snonce2 = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce2, anonce)
|
|
reply_eapol("2/4 (b)", hapd, addr, msg2, 0x010a, snonce2, rsne, kck)
|
|
|
|
msg = recv_eapol(hapd)
|
|
if anonce != msg['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
|
|
hapd_connected(hapd)
|
|
|
|
def test_ap_wpa2_psk_ext_eapol_retry1d(dev, apdev):
|
|
"""WPA2 4-way handshake with EAPOL-Key 1/4 and 2/4 retransmitted and SNonce changing and older used"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
msg1 = recv_eapol(hapd)
|
|
anonce = msg1['rsn_key_nonce']
|
|
msg2 = recv_eapol(hapd)
|
|
if anonce != msg2['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
reply_eapol("2/4 (a)", hapd, addr, msg1, 0x010a, snonce, rsne, kck)
|
|
|
|
snonce2 = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
(ptk2, kck2, kek2) = pmk_to_ptk(pmk, addr, bssid, snonce2, anonce)
|
|
|
|
reply_eapol("2/4 (b)", hapd, addr, msg2, 0x010a, snonce2, rsne, kck2)
|
|
msg = recv_eapol(hapd)
|
|
if anonce != msg['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
|
|
hapd_connected(hapd)
|
|
|
|
def test_ap_wpa2_psk_ext_eapol_type_diff(dev, apdev):
|
|
"""WPA2 4-way handshake using external EAPOL supplicant"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
msg = recv_eapol(hapd)
|
|
anonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
# Incorrect descriptor type (frame dropped)
|
|
msg['descr_type'] = 253
|
|
rsn_eapol_key_set(msg, 0x010a, 0, snonce, rsne)
|
|
eapol_key_mic(kck, msg)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
# Incorrect descriptor type, but with a workaround (frame processed)
|
|
msg['descr_type'] = 254
|
|
rsn_eapol_key_set(msg, 0x010a, 0, snonce, rsne)
|
|
eapol_key_mic(kck, msg)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
msg = recv_eapol(hapd)
|
|
if anonce != msg['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
logger.info("Replay same data back")
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
|
|
hapd_connected(hapd)
|
|
|
|
def test_ap_wpa_psk_ext_eapol(dev, apdev):
|
|
"""WPA2-PSK AP using external EAPOL supplicant"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,wpae) = eapol_test(apdev[0], dev[0],
|
|
wpa2=False)
|
|
|
|
msg = recv_eapol(hapd)
|
|
anonce = msg['rsn_key_nonce']
|
|
logger.info("Replay same data back")
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
logger.info("Too short data")
|
|
send_eapol(hapd, addr, build_eapol(msg)[0:98])
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
msg['descr_type'] = 2
|
|
reply_eapol("2/4(invalid type)", hapd, addr, msg, 0x010a, snonce, wpae, kck)
|
|
msg['descr_type'] = 254
|
|
reply_eapol("2/4", hapd, addr, msg, 0x010a, snonce, wpae, kck)
|
|
|
|
msg = recv_eapol(hapd)
|
|
if anonce != msg['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
logger.info("Replay same data back")
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
|
|
hapd_connected(hapd)
|
|
|
|
def test_ap_wpa2_psk_ext_eapol_key_info(dev, apdev):
|
|
"""WPA2-PSK 4-way handshake with strange key info values"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
msg = recv_eapol(hapd)
|
|
anonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
rsn_eapol_key_set(msg, 0x0000, 0, snonce, rsne)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
rsn_eapol_key_set(msg, 0xffff, 0, snonce, rsne)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
# SMK M1
|
|
rsn_eapol_key_set(msg, 0x2802, 0, snonce, rsne)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
# SMK M3
|
|
rsn_eapol_key_set(msg, 0x2002, 0, snonce, rsne)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
# Request
|
|
rsn_eapol_key_set(msg, 0x0902, 0, snonce, rsne)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
# Request
|
|
rsn_eapol_key_set(msg, 0x0902, 0, snonce, rsne)
|
|
tmp_kck = binascii.unhexlify('00000000000000000000000000000000')
|
|
eapol_key_mic(tmp_kck, msg)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
reply_eapol("2/4", hapd, addr, msg, 0x010a, snonce, rsne, kck)
|
|
|
|
msg = recv_eapol(hapd)
|
|
if anonce != msg['rsn_key_nonce']:
|
|
raise Exception("ANonce changed")
|
|
|
|
# Request (valic MIC)
|
|
rsn_eapol_key_set(msg, 0x0902, 0, snonce, rsne)
|
|
eapol_key_mic(kck, msg)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
# Request (valid MIC, replayed counter)
|
|
rsn_eapol_key_set(msg, 0x0902, 0, snonce, rsne)
|
|
eapol_key_mic(kck, msg)
|
|
send_eapol(hapd, addr, build_eapol(msg))
|
|
|
|
reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
|
|
hapd_connected(hapd)
|
|
|
|
def build_eapol_key_1_4(anonce, replay_counter=1, key_data='', key_len=16):
|
|
msg = {}
|
|
msg['version'] = 2
|
|
msg['type'] = 3
|
|
msg['length'] = 95 + len(key_data)
|
|
|
|
msg['descr_type'] = 2
|
|
msg['rsn_key_info'] = 0x8a
|
|
msg['rsn_key_len'] = key_len
|
|
msg['rsn_replay_counter'] = struct.pack('>Q', replay_counter)
|
|
msg['rsn_key_nonce'] = anonce
|
|
msg['rsn_key_iv'] = binascii.unhexlify('00000000000000000000000000000000')
|
|
msg['rsn_key_rsc'] = binascii.unhexlify('0000000000000000')
|
|
msg['rsn_key_id'] = binascii.unhexlify('0000000000000000')
|
|
msg['rsn_key_mic'] = binascii.unhexlify('00000000000000000000000000000000')
|
|
msg['rsn_key_data_len'] = len(key_data)
|
|
msg['rsn_key_data'] = key_data
|
|
return msg
|
|
|
|
def build_eapol_key_3_4(anonce, kck, key_data, replay_counter=2,
|
|
key_info=0x13ca, extra_len=0, descr_type=2, key_len=16):
|
|
msg = {}
|
|
msg['version'] = 2
|
|
msg['type'] = 3
|
|
msg['length'] = 95 + len(key_data) + extra_len
|
|
|
|
msg['descr_type'] = descr_type
|
|
msg['rsn_key_info'] = key_info
|
|
msg['rsn_key_len'] = key_len
|
|
msg['rsn_replay_counter'] = struct.pack('>Q', replay_counter)
|
|
msg['rsn_key_nonce'] = anonce
|
|
msg['rsn_key_iv'] = binascii.unhexlify('00000000000000000000000000000000')
|
|
msg['rsn_key_rsc'] = binascii.unhexlify('0000000000000000')
|
|
msg['rsn_key_id'] = binascii.unhexlify('0000000000000000')
|
|
msg['rsn_key_data_len'] = len(key_data)
|
|
msg['rsn_key_data'] = key_data
|
|
eapol_key_mic(kck, msg)
|
|
return msg
|
|
|
|
def aes_wrap(kek, plain):
|
|
n = len(plain) / 8
|
|
a = 0xa6a6a6a6a6a6a6a6
|
|
enc = AES.new(kek).encrypt
|
|
r = [plain[i * 8:(i + 1) * 8] for i in range(0, n)]
|
|
for j in range(6):
|
|
for i in range(1, n + 1):
|
|
b = enc(struct.pack('>Q', a) + r[i - 1])
|
|
a = struct.unpack('>Q', b[:8])[0] ^ (n * j + i)
|
|
r[i - 1] =b[8:]
|
|
return struct.pack('>Q', a) + ''.join(r)
|
|
|
|
def pad_key_data(plain):
|
|
pad_len = len(plain) % 8
|
|
if pad_len:
|
|
pad_len = 8 - pad_len
|
|
plain += '\xdd'
|
|
pad_len -= 1
|
|
plain += pad_len * '\0'
|
|
return plain
|
|
|
|
def test_ap_wpa2_psk_supp_proto(dev, apdev):
|
|
"""WPA2-PSK 4-way handshake protocol testing for supplicant"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Invalid AES wrap data length 0")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '', replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Unsupported AES-WRAP len 0"])
|
|
if ev is None:
|
|
raise Exception("Unsupported AES-WRAP len 0 not reported")
|
|
|
|
logger.debug("Invalid AES wrap data length 1")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '1', replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Unsupported AES-WRAP len 1"])
|
|
if ev is None:
|
|
raise Exception("Unsupported AES-WRAP len 1 not reported")
|
|
|
|
logger.debug("Invalid AES wrap data length 9")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '123456789', replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Unsupported AES-WRAP len 9"])
|
|
if ev is None:
|
|
raise Exception("Unsupported AES-WRAP len 9 not reported")
|
|
|
|
logger.debug("Invalid AES wrap data payload")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '12345678', replay_counter=counter)
|
|
# do not increment counter to test replay protection
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: AES unwrap failed"])
|
|
if ev is None:
|
|
raise Exception("AES unwrap failure not reported")
|
|
|
|
logger.debug("Replay Count not increasing")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '12345678', replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: EAPOL-Key Replay Counter did not increase"])
|
|
if ev is None:
|
|
raise Exception("Replay Counter replay not reported")
|
|
|
|
logger.debug("Missing Ack bit in key info")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '12345678', replay_counter=counter,
|
|
key_info=0x134a)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: No Ack bit in key_info"])
|
|
if ev is None:
|
|
raise Exception("Missing Ack bit not reported")
|
|
|
|
logger.debug("Unexpected Request bit in key info")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '12345678', replay_counter=counter,
|
|
key_info=0x1bca)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: EAPOL-Key with Request bit"])
|
|
if ev is None:
|
|
raise Exception("Request bit not reported")
|
|
|
|
logger.debug("Unsupported key descriptor version 0")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '0123456789abcdef',
|
|
replay_counter=counter, key_info=0x13c8)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Unsupported EAPOL-Key descriptor version 0"])
|
|
if ev is None:
|
|
raise Exception("Unsupported EAPOL-Key descriptor version 0 not reported")
|
|
|
|
logger.debug("Key descriptor version 1 not allowed with CCMP")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '0123456789abcdef',
|
|
replay_counter=counter, key_info=0x13c9)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: CCMP is used, but EAPOL-Key descriptor version (1) is not 2"])
|
|
if ev is None:
|
|
raise Exception("Not allowed EAPOL-Key descriptor version not reported")
|
|
|
|
logger.debug("Invalid AES wrap payload with key descriptor version 2")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '0123456789abcdef',
|
|
replay_counter=counter, key_info=0x13ca)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: AES unwrap failed"])
|
|
if ev is None:
|
|
raise Exception("AES unwrap failure not reported")
|
|
|
|
logger.debug("Key descriptor version 3 workaround")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '0123456789abcdef',
|
|
replay_counter=counter, key_info=0x13cb)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: CCMP is used, but EAPOL-Key descriptor version (3) is not 2"])
|
|
if ev is None:
|
|
raise Exception("CCMP key descriptor mismatch not reported")
|
|
ev = dev[0].wait_event(["WPA: Interoperability workaround"])
|
|
if ev is None:
|
|
raise Exception("AES-128-CMAC workaround not reported")
|
|
ev = dev[0].wait_event(["WPA: Invalid EAPOL-Key MIC - dropping packet"])
|
|
if ev is None:
|
|
raise Exception("MIC failure with AES-128-CMAC workaround not reported")
|
|
|
|
logger.debug("Unsupported key descriptor version 4")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '0123456789abcdef',
|
|
replay_counter=counter, key_info=0x13cc)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Unsupported EAPOL-Key descriptor version 4"])
|
|
if ev is None:
|
|
raise Exception("Unsupported EAPOL-Key descriptor version 4 not reported")
|
|
|
|
logger.debug("Unsupported key descriptor version 7")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '0123456789abcdef',
|
|
replay_counter=counter, key_info=0x13cf)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Unsupported EAPOL-Key descriptor version 7"])
|
|
if ev is None:
|
|
raise Exception("Unsupported EAPOL-Key descriptor version 7 not reported")
|
|
|
|
logger.debug("Too short EAPOL header length")
|
|
dev[0].dump_monitor()
|
|
msg = build_eapol_key_3_4(anonce, kck, '12345678', replay_counter=counter,
|
|
extra_len=-1)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Invalid EAPOL-Key frame - key_data overflow (8 > 7)"])
|
|
if ev is None:
|
|
raise Exception("Key data overflow not reported")
|
|
|
|
logger.debug("Too long EAPOL header length")
|
|
msg = build_eapol_key_3_4(anonce, kck, '12345678', replay_counter=counter,
|
|
extra_len=1)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
|
|
logger.debug("Unsupported descriptor type 0")
|
|
msg = build_eapol_key_3_4(anonce, kck, '12345678', replay_counter=counter,
|
|
descr_type=0)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
|
|
logger.debug("WPA descriptor type 0")
|
|
msg = build_eapol_key_3_4(anonce, kck, '12345678', replay_counter=counter,
|
|
descr_type=254)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
|
|
logger.debug("Non-zero key index for pairwise key")
|
|
dev[0].dump_monitor()
|
|
wrapped = aes_wrap(kek, 16*'z')
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter,
|
|
key_info=0x13ea)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Ignored EAPOL-Key (Pairwise) with non-zero key index"])
|
|
if ev is None:
|
|
raise Exception("Non-zero key index not reported")
|
|
|
|
logger.debug("Invalid Key Data plaintext payload --> disconnect")
|
|
dev[0].dump_monitor()
|
|
wrapped = aes_wrap(kek, 16*'z')
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_no_ie(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: IE not included"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("No IEs in msg 3/4 --> disconnect")
|
|
dev[0].dump_monitor()
|
|
wrapped = aes_wrap(kek, 16*'\0')
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_ie_mismatch(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: IE mismatch"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Msg 3/4 with mismatching IE")
|
|
dev[0].dump_monitor()
|
|
wrapped = aes_wrap(kek, pad_key_data(binascii.unhexlify('30060100000fac04dd16000fac010100dc11188831bf4aa4a8678d2b41498618')))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_ok(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: success"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Valid EAPOL-Key msg 3/4")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00dd16000fac010100dc11188831bf4aa4a8678d2b41498618')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
dev[0].wait_connected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_no_gtk(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: no GTK"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("EAPOL-Key msg 3/4 without GTK KDE")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=0.1)
|
|
if ev is not None:
|
|
raise Exception("Unexpected connection completion reported")
|
|
|
|
def test_ap_wpa2_psk_supp_proto_anonce_change(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: ANonce change"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Valid EAPOL-Key msg 3/4")
|
|
dev[0].dump_monitor()
|
|
anonce2 = binascii.unhexlify('3333333333333333333333333333333333333333333333333333333333333333')
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00dd16000fac010100dc11188831bf4aa4a8678d2b41498618')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce2, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: ANonce from message 1 of 4-Way Handshake differs from 3 of 4-Way Handshake"])
|
|
if ev is None:
|
|
raise Exception("ANonce change not reported")
|
|
|
|
def test_ap_wpa2_psk_supp_proto_unexpected_group_msg(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: unexpected group message"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Group key 1/2 instead of msg 3/4")
|
|
dev[0].dump_monitor()
|
|
wrapped = aes_wrap(kek, binascii.unhexlify('dd16000fac010100dc11188831bf4aa4a8678d2b41498618'))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter,
|
|
key_info=0x13c2)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Group Key Handshake started prior to completion of 4-way handshake"])
|
|
if ev is None:
|
|
raise Exception("Unexpected group key message not reported")
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_msg_1_invalid_kde(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: invalid KDE in msg 1/4"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4 with invalid KDE
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter,
|
|
key_data=binascii.unhexlify('5555'))
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_wrong_pairwise_key_len(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: wrong pairwise key length"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Valid EAPOL-Key msg 3/4")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00dd16000fac010100dc11188831bf4aa4a8678d2b41498618')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter,
|
|
key_len=15)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Invalid CCMP key length 15"])
|
|
if ev is None:
|
|
raise Exception("Invalid CCMP key length not reported")
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_wrong_group_key_len(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: wrong group key length"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Valid EAPOL-Key msg 3/4")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00dd15000fac010100dc11188831bf4aa4a8678d2b414986')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Unsupported CCMP Group Cipher key length 15"])
|
|
if ev is None:
|
|
raise Exception("Invalid CCMP key length not reported")
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_gtk_tx_bit_workaround(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: GTK TX bit workaround"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Valid EAPOL-Key msg 3/4")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00dd16000fac010500dc11188831bf4aa4a8678d2b41498618')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Tx bit set for GTK, but pairwise keys are used - ignore Tx bit"])
|
|
if ev is None:
|
|
raise Exception("GTK Tx bit workaround not reported")
|
|
dev[0].wait_connected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_gtk_keyidx_0_and_3(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: GTK key index 0 and 3"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Valid EAPOL-Key msg 3/4 (GTK keyidx 0)")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00dd16000fac010000dc11188831bf4aa4a8678d2b41498618')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
dev[0].wait_connected(timeout=1)
|
|
|
|
logger.debug("Valid EAPOL-Key group msg 1/2 (GTK keyidx 3)")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('dd16000fac010300dc11188831bf4aa4a8678d2b41498618')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter,
|
|
key_info=0x13c2)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
ev = dev[0].wait_event(["WPA: Group rekeying completed"])
|
|
if ev is None:
|
|
raise Exception("GTK rekeing not reported")
|
|
|
|
logger.debug("Unencrypted GTK KDE in group msg 1/2")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('dd16000fac010300dc11188831bf4aa4a8678d2b41498618')
|
|
msg = build_eapol_key_3_4(anonce, kck, plain, replay_counter=counter,
|
|
key_info=0x03c2)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: GTK IE in unencrypted key data"])
|
|
if ev is None:
|
|
raise Exception("Unencrypted GTK KDE not reported")
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_no_gtk_in_group_msg(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: GTK KDE missing from group msg"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Valid EAPOL-Key msg 3/4 (GTK keyidx 0)")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00dd16000fac010000dc11188831bf4aa4a8678d2b41498618')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
dev[0].wait_connected(timeout=1)
|
|
|
|
logger.debug("No GTK KDE in EAPOL-Key group msg 1/2")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('dd00dd00dd00dd00dd00dd00dd00dd00')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter,
|
|
key_info=0x13c2)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: No GTK IE in Group Key msg 1/2"])
|
|
if ev is None:
|
|
raise Exception("Missing GTK KDE not reported")
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_too_long_gtk_in_group_msg(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: too long GTK KDE in group msg"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Valid EAPOL-Key msg 3/4 (GTK keyidx 0)")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00dd16000fac010000dc11188831bf4aa4a8678d2b41498618')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
dev[0].wait_connected(timeout=1)
|
|
|
|
logger.debug("EAPOL-Key group msg 1/2 with too long GTK KDE")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('dd27000fac010100ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter,
|
|
key_info=0x13c2)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: Unsupported CCMP Group Cipher key length 33"])
|
|
if ev is None:
|
|
raise Exception("Too long GTK KDE not reported")
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_too_long_gtk_kde(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: too long GTK KDE"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("EAPOL-Key msg 3/4 with too short GTK KDE")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00dd27000fac010100ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff')
|
|
wrapped = aes_wrap(kek, pad_key_data(plain))
|
|
msg = build_eapol_key_3_4(anonce, kck, wrapped, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def test_ap_wpa2_psk_supp_proto_gtk_not_encrypted(dev, apdev):
|
|
"""WPA2-PSK supplicant protocol testing: GTK KDE not encrypted"""
|
|
(bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
|
|
|
|
# Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
|
|
msg = recv_eapol(hapd)
|
|
dev[0].dump_monitor()
|
|
|
|
# Build own EAPOL-Key msg 1/4
|
|
anonce = binascii.unhexlify('2222222222222222222222222222222222222222222222222222222222222222')
|
|
counter = 1
|
|
msg = build_eapol_key_1_4(anonce, replay_counter=counter)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
msg = recv_eapol(dev[0])
|
|
snonce = msg['rsn_key_nonce']
|
|
|
|
(ptk, kck, kek) = pmk_to_ptk(pmk, addr, bssid, snonce, anonce)
|
|
|
|
logger.debug("Valid EAPOL-Key msg 3/4")
|
|
dev[0].dump_monitor()
|
|
plain = binascii.unhexlify('30140100000fac040100000fac040100000fac020c00dd16000fac010100dc11188831bf4aa4a8678d2b41498618')
|
|
msg = build_eapol_key_3_4(anonce, kck, plain, replay_counter=counter,
|
|
key_info=0x03ca)
|
|
counter += 1
|
|
send_eapol(dev[0], addr, build_eapol(msg))
|
|
ev = dev[0].wait_event(["WPA: GTK IE in unencrypted key data"])
|
|
if ev is None:
|
|
raise Exception("Unencrypted GTK KDE not reported")
|
|
dev[0].wait_disconnected(timeout=1)
|
|
|
|
def find_wpas_process(dev):
|
|
ifname = dev.ifname
|
|
cmd = subprocess.Popen(['ps', 'ax'], stdout=subprocess.PIPE)
|
|
(data,err) = cmd.communicate()
|
|
for l in data.splitlines():
|
|
if "wpa_supplicant" not in l:
|
|
continue
|
|
if "-i" + ifname not in l:
|
|
continue
|
|
return int(l.strip().split(' ')[0])
|
|
raise Exception("Could not find wpa_supplicant process")
|
|
|
|
def read_process_memory(pid, key=None):
|
|
buf = bytes()
|
|
logger.info("Reading process memory (pid=%d)" % pid)
|
|
with open('/proc/%d/maps' % pid, 'r') as maps, \
|
|
open('/proc/%d/mem' % pid, 'r') as mem:
|
|
for l in maps.readlines():
|
|
m = re.match(r'([0-9a-f]+)-([0-9a-f]+) ([-r][-w][-x][-p])', l)
|
|
if not m:
|
|
continue
|
|
start = int(m.group(1), 16)
|
|
end = int(m.group(2), 16)
|
|
perm = m.group(3)
|
|
if start > 0xffffffffffff:
|
|
continue
|
|
if end < start:
|
|
continue
|
|
if not perm.startswith('rw'):
|
|
continue
|
|
for name in [ "[heap]", "[stack]" ]:
|
|
if name in l:
|
|
logger.info("%s 0x%x-0x%x is at %d-%d" % (name, start, end, len(buf), len(buf) + (end - start)))
|
|
mem.seek(start)
|
|
data = mem.read(end - start)
|
|
buf += data
|
|
if key and key in data:
|
|
logger.info("Key found in " + l)
|
|
logger.info("Total process memory read: %d bytes" % len(buf))
|
|
return buf
|
|
|
|
def verify_not_present(buf, key, fname, keyname):
|
|
pos = buf.find(key)
|
|
if pos < 0:
|
|
return
|
|
|
|
prefix = 2048 if pos > 2048 else pos
|
|
with open(fname + keyname, 'w') as f:
|
|
f.write(buf[pos - prefix:pos + 2048])
|
|
raise Exception(keyname + " found after disassociation")
|
|
|
|
def get_key_locations(buf, key, keyname):
|
|
count = 0
|
|
pos = 0
|
|
while True:
|
|
pos = buf.find(key, pos)
|
|
if pos < 0:
|
|
break
|
|
logger.info("Found %s at %d" % (keyname, pos))
|
|
context = 128;
|
|
start = pos - context if pos > context else 0
|
|
before = binascii.hexlify(buf[start:pos])
|
|
context += len(key)
|
|
end = pos + context if pos < len(buf) - context else len(buf) - context
|
|
after = binascii.hexlify(buf[pos + len(key):end])
|
|
logger.debug("Memory context %d-%d: %s|%s|%s" % (start, end, before, binascii.hexlify(key), after))
|
|
count += 1
|
|
pos += len(key)
|
|
return count
|
|
|
|
def test_wpa2_psk_key_lifetime_in_memory(dev, apdev, params):
|
|
"""WPA2-PSK and PSK/PTK lifetime in memory"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
pmk = binascii.unhexlify(psk)
|
|
p = hostapd.wpa2_params(ssid=ssid)
|
|
p['wpa_psk'] = psk
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], p)
|
|
|
|
pid = find_wpas_process(dev[0])
|
|
|
|
id = dev[0].connect(ssid, raw_psk=psk, scan_freq="2412",
|
|
only_add_network=True)
|
|
|
|
logger.info("Checking keys in memory after network profile configuration")
|
|
buf = read_process_memory(pid, pmk)
|
|
get_key_locations(buf, pmk, "PMK")
|
|
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
logger.info("Checking keys in memory after network profile removal")
|
|
buf = read_process_memory(pid, pmk)
|
|
get_key_locations(buf, pmk, "PMK")
|
|
|
|
id = dev[0].connect(ssid, psk=passphrase, scan_freq="2412",
|
|
only_add_network=True)
|
|
|
|
logger.info("Checking keys in memory before connection")
|
|
buf = read_process_memory(pid, pmk)
|
|
get_key_locations(buf, pmk, "PMK")
|
|
|
|
dev[0].connect_network(id, timeout=20)
|
|
# The decrypted copy of GTK is freed only after the CTRL-EVENT-CONNECTED
|
|
# event has been delivered, so verify that wpa_supplicant has returned to
|
|
# eloop before reading process memory.
|
|
time.sleep(1)
|
|
dev[0].ping()
|
|
|
|
buf = read_process_memory(pid, pmk)
|
|
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
|
|
dev[0].relog()
|
|
ptk = None
|
|
gtk = None
|
|
with open(os.path.join(params['logdir'], 'log0'), 'r') as f:
|
|
for l in f.readlines():
|
|
if "WPA: PTK - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
ptk = binascii.unhexlify(val)
|
|
if "WPA: Group Key - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
gtk = binascii.unhexlify(val)
|
|
if not pmk or not ptk or not gtk:
|
|
raise Exception("Could not find keys from debug log")
|
|
if len(gtk) != 16:
|
|
raise Exception("Unexpected GTK length")
|
|
|
|
kck = ptk[0:16]
|
|
kek = ptk[16:32]
|
|
tk = ptk[32:48]
|
|
|
|
logger.info("Checking keys in memory while associated")
|
|
get_key_locations(buf, pmk, "PMK")
|
|
if pmk not in buf:
|
|
raise HwsimSkip("PMK not found while associated")
|
|
if kck not in buf:
|
|
raise Exception("KCK not found while associated")
|
|
if kek not in buf:
|
|
raise Exception("KEK not found while associated")
|
|
if tk in buf:
|
|
raise Exception("TK found from memory")
|
|
if gtk in buf:
|
|
get_key_locations(buf, gtk, "GTK")
|
|
raise Exception("GTK found from memory")
|
|
|
|
logger.info("Checking keys in memory after disassociation")
|
|
buf = read_process_memory(pid, pmk)
|
|
get_key_locations(buf, pmk, "PMK")
|
|
|
|
# Note: PMK/PSK is still present in network configuration
|
|
|
|
fname = os.path.join(params['logdir'],
|
|
'wpa2_psk_key_lifetime_in_memory.memctx-')
|
|
verify_not_present(buf, kck, fname, "KCK")
|
|
verify_not_present(buf, kek, fname, "KEK")
|
|
verify_not_present(buf, tk, fname, "TK")
|
|
verify_not_present(buf, gtk, fname, "GTK")
|
|
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
|
|
logger.info("Checking keys in memory after network profile removal")
|
|
buf = read_process_memory(pid, pmk)
|
|
get_key_locations(buf, pmk, "PMK")
|
|
|
|
verify_not_present(buf, pmk, fname, "PMK")
|
|
verify_not_present(buf, kck, fname, "KCK")
|
|
verify_not_present(buf, kek, fname, "KEK")
|
|
verify_not_present(buf, tk, fname, "TK")
|
|
verify_not_present(buf, gtk, fname, "GTK")
|
|
|
|
def test_ap_wpa2_psk_wep(dev, apdev):
|
|
"""WPA2-PSK AP and WEP enabled"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
try:
|
|
hapd.set('wep_key0', '"hello"')
|
|
raise Exception("WEP key accepted to WPA2 network")
|
|
except Exception:
|
|
pass
|
|
|
|
def test_ap_wpa2_psk_wpas_in_bridge(dev, apdev):
|
|
"""WPA2-PSK AP and wpas interface in a bridge"""
|
|
br_ifname='sta-br0'
|
|
ifname='wlan5'
|
|
try:
|
|
_test_ap_wpa2_psk_wpas_in_bridge(dev, apdev)
|
|
finally:
|
|
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'down'])
|
|
subprocess.call(['brctl', 'delif', br_ifname, ifname])
|
|
subprocess.call(['brctl', 'delbr', br_ifname])
|
|
subprocess.call(['iw', ifname, 'set', '4addr', 'off'])
|
|
|
|
def _test_ap_wpa2_psk_wpas_in_bridge(dev, apdev):
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
|
|
br_ifname='sta-br0'
|
|
ifname='wlan5'
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
subprocess.call(['brctl', 'addbr', br_ifname])
|
|
subprocess.call(['brctl', 'setfd', br_ifname, '0'])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'up'])
|
|
subprocess.call(['iw', ifname, 'set', '4addr', 'on'])
|
|
subprocess.check_call(['brctl', 'addif', br_ifname, ifname])
|
|
wpas.interface_add(ifname, br_ifname=br_ifname)
|
|
wpas.dump_monitor()
|
|
|
|
wpas.connect(ssid, psk=passphrase, scan_freq="2412")
|
|
wpas.dump_monitor()
|
|
|
|
def test_ap_wpa2_psk_ifdown(dev, apdev):
|
|
"""AP with open mode and external ifconfig down"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
subprocess.call(['ip', 'link', 'set', 'dev', apdev[0]['ifname'], 'down'])
|
|
ev = hapd.wait_event(["INTERFACE-DISABLED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No INTERFACE-DISABLED event")
|
|
# this wait tests beacon loss detection in mac80211
|
|
dev[0].wait_disconnected()
|
|
subprocess.call(['ip', 'link', 'set', 'dev', apdev[0]['ifname'], 'up'])
|
|
ev = hapd.wait_event(["INTERFACE-ENABLED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No INTERFACE-ENABLED event")
|
|
dev[0].wait_connected()
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_wpa2_psk_drop_first_msg_4(dev, apdev):
|
|
"""WPA2-PSK and first EAPOL-Key msg 4/4 dropped"""
|
|
bssid = apdev[0]['bssid']
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
params = hostapd.wpa2_params(ssid=ssid)
|
|
params['wpa_psk'] = psk
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
hapd.request("SET ext_eapol_frame_io 1")
|
|
dev[0].request("SET ext_eapol_frame_io 1")
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412", wait_connect=False)
|
|
addr = dev[0].own_addr()
|
|
|
|
# EAPOL-Key msg 1/4
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from hostapd")
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to wpa_supplicant failed")
|
|
|
|
# EAPOL-Key msg 2/4
|
|
ev = dev[0].wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from wpa_supplicant")
|
|
res = hapd.request("EAPOL_RX " + addr + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to hostapd failed")
|
|
|
|
# EAPOL-Key msg 3/4
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from hostapd")
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to wpa_supplicant failed")
|
|
|
|
# EAPOL-Key msg 4/4
|
|
ev = dev[0].wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from wpa_supplicant")
|
|
logger.info("Drop the first EAPOL-Key msg 4/4")
|
|
|
|
# wpa_supplicant believes now that 4-way handshake succeeded; hostapd
|
|
# doesn't. Use normal EAPOL TX/RX to handle retries.
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
dev[0].wait_connected()
|
|
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on AP-STA-CONNECTED from hostapd")
|
|
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=0.1)
|
|
if ev is not None:
|
|
logger.info("Disconnection detected")
|
|
# The EAPOL-Key retries are supposed to allow the connection to be
|
|
# established without having to reassociate. However, this does not
|
|
# currently work since mac80211 ends up encrypting EAPOL-Key msg 4/4
|
|
# after the pairwise key has been configured and AP will drop those and
|
|
# disconnect the station after reaching retransmission limit. Connection
|
|
# is then established after reassociation. Once that behavior has been
|
|
# optimized to prevent EAPOL-Key frame encryption for retransmission
|
|
# case, this exception can be uncommented here.
|
|
#raise Exception("Unexpected disconnection")
|
|
|
|
def test_ap_wpa2_psk_disable_enable(dev, apdev):
|
|
"""WPA2-PSK AP getting disabled and re-enabled"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
params = hostapd.wpa2_params(ssid=ssid)
|
|
params['wpa_psk'] = psk
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, raw_psk=psk, scan_freq="2412")
|
|
|
|
for i in range(2):
|
|
hapd.request("DISABLE")
|
|
dev[0].wait_disconnected()
|
|
hapd.request("ENABLE")
|
|
dev[0].wait_connected()
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_wpa2_psk_incorrect_passphrase(dev, apdev):
|
|
"""WPA2-PSK AP and station using incorrect passphrase"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk="incorrect passphrase", scan_freq="2412",
|
|
wait_connect=False)
|
|
ev = hapd.wait_event(["AP-STA-POSSIBLE-PSK-MISMATCH"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No AP-STA-POSSIBLE-PSK-MISMATCH reported")
|
|
dev[0].dump_monitor()
|
|
|
|
hapd.disable()
|
|
hapd.set("wpa_passphrase", "incorrect passphrase")
|
|
hapd.enable()
|
|
|
|
dev[0].wait_connected(timeout=20)
|
|
|
|
def test_ap_wpa_ie_parsing(dev, apdev):
|
|
"""WPA IE parsing"""
|
|
skip_with_fips(dev[0])
|
|
ssid = "test-wpa-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
id = dev[0].connect(ssid, psk=passphrase, scan_freq="2412",
|
|
only_add_network=True)
|
|
|
|
tests = [ "dd040050f201",
|
|
"dd050050f20101",
|
|
"dd060050f2010100",
|
|
"dd060050f2010001",
|
|
"dd070050f201010000",
|
|
"dd080050f20101000050",
|
|
"dd090050f20101000050f2",
|
|
"dd0a0050f20101000050f202",
|
|
"dd0b0050f20101000050f20201",
|
|
"dd0c0050f20101000050f2020100",
|
|
"dd0c0050f20101000050f2020000",
|
|
"dd0c0050f20101000050f202ffff",
|
|
"dd0d0050f20101000050f202010000",
|
|
"dd0e0050f20101000050f20201000050",
|
|
"dd0f0050f20101000050f20201000050f2",
|
|
"dd100050f20101000050f20201000050f202",
|
|
"dd110050f20101000050f20201000050f20201",
|
|
"dd120050f20101000050f20201000050f2020100",
|
|
"dd120050f20101000050f20201000050f2020000",
|
|
"dd120050f20101000050f20201000050f202ffff",
|
|
"dd130050f20101000050f20201000050f202010000",
|
|
"dd140050f20101000050f20201000050f20201000050",
|
|
"dd150050f20101000050f20201000050f20201000050f2" ]
|
|
for t in tests:
|
|
try:
|
|
if "OK" not in dev[0].request("VENDOR_ELEM_ADD 13 " + t):
|
|
raise Exception("VENDOR_ELEM_ADD failed")
|
|
dev[0].select_network(id)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-ASSOC-REJECT"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Association rejection not reported")
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].dump_monitor()
|
|
finally:
|
|
dev[0].request("VENDOR_ELEM_REMOVE 13 *")
|
|
|
|
tests = [ "dd170050f20101000050f20201000050f20201000050f202ff",
|
|
"dd180050f20101000050f20201000050f20201000050f202ffff",
|
|
"dd190050f20101000050f20201000050f20201000050f202ffffff" ]
|
|
for t in tests:
|
|
try:
|
|
if "OK" not in dev[0].request("VENDOR_ELEM_ADD 13 " + t):
|
|
raise Exception("VENDOR_ELEM_ADD failed")
|
|
dev[0].select_network(id)
|
|
dev[0].wait_connected()
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].dump_monitor()
|
|
finally:
|
|
dev[0].request("VENDOR_ELEM_REMOVE 13 *")
|
|
|
|
def test_ap_wpa2_psk_no_random(dev, apdev):
|
|
"""WPA2-PSK AP and no random numbers available"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
psk = '602e323e077bc63bd80307ef4745b754b0ae0a925c2638ecd13a794b9527b9e6'
|
|
params = hostapd.wpa2_params(ssid=ssid)
|
|
params['wpa_psk'] = psk
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
with fail_test(hapd, 1, "wpa_gmk_to_gtk"):
|
|
id = dev[0].connect(ssid, raw_psk=psk, scan_freq="2412",
|
|
wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Disconnection event not reported")
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].select_network(id, freq=2412)
|
|
dev[0].wait_connected()
|
|
|
|
def test_rsn_ie_proto_psk_sta(dev, apdev):
|
|
"""RSN element protocol testing for PSK cases on STA side"""
|
|
bssid = apdev[0]['bssid']
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
# This is the RSN element used normally by hostapd
|
|
params['own_ie_override'] = '30140100000fac040100000fac040100000fac020c00'
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
if "FAIL" not in hapd.request("SET own_ie_override qwerty"):
|
|
raise Exception("Invalid own_ie_override value accepted")
|
|
id = dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
|
|
tests = [ ('No RSN Capabilities field',
|
|
'30120100000fac040100000fac040100000fac02'),
|
|
('Reserved RSN Capabilities bits set',
|
|
'30140100000fac040100000fac040100000fac023cff'),
|
|
('Extra pairwise cipher suite (unsupported)',
|
|
'30180100000fac040200ffffffff000fac040100000fac020c00'),
|
|
('Extra AKM suite (unsupported)',
|
|
'30180100000fac040100000fac040200ffffffff000fac020c00'),
|
|
('PMKIDCount field included',
|
|
'30160100000fac040100000fac040100000fac020c000000'),
|
|
('Unexpected Group Management Cipher Suite with PMF disabled',
|
|
'301a0100000fac040100000fac040100000fac020c000000000fac06'),
|
|
('Extra octet after defined fields (future extensibility)',
|
|
'301b0100000fac040100000fac040100000fac020c000000000fac0600') ]
|
|
for txt,ie in tests:
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
logger.info(txt)
|
|
hapd.disable()
|
|
hapd.set('own_ie_override', ie)
|
|
hapd.enable()
|
|
dev[0].request("BSS_FLUSH 0")
|
|
dev[0].scan_for_bss(bssid, 2412, force_scan=True, only_new=True)
|
|
dev[0].select_network(id, freq=2412)
|
|
dev[0].wait_connected()
|
|
|
|
def test_ap_cli_order(dev, apdev):
|
|
ssid = "test-rsn-setup"
|
|
passphrase = 'zzzzzzzz'
|
|
ifname = apdev[0]['ifname']
|
|
|
|
hapd_global = hostapd.HostapdGlobal()
|
|
hapd_global.remove(ifname)
|
|
hapd_global.add(ifname)
|
|
|
|
hapd = hostapd.Hostapd(ifname)
|
|
hapd.set_defaults()
|
|
hapd.set('ssid', ssid)
|
|
hapd.set('wpa_passphrase', passphrase)
|
|
hapd.set('rsn_pairwise', 'CCMP')
|
|
hapd.set('wpa_key_mgmt', 'WPA-PSK')
|
|
hapd.set('wpa', '2')
|
|
hapd.enable()
|
|
cfg = hapd.get_config()
|
|
if cfg['group_cipher'] != 'CCMP':
|
|
raise Exception("Unexpected group_cipher: " + cfg['group_cipher'])
|
|
if cfg['rsn_pairwise_cipher'] != 'CCMP':
|
|
raise Exception("Unexpected rsn_pairwise_cipher: " + cfg['rsn_pairwise_cipher'])
|
|
|
|
ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("AP startup timed out")
|
|
if "AP-ENABLED" not in ev:
|
|
raise Exception("AP startup failed")
|
|
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
|
|
def set_test_assoc_ie(dev, ie):
|
|
if "OK" not in dev.request("TEST_ASSOC_IE " + ie):
|
|
raise Exception("Could not set TEST_ASSOC_IE")
|
|
|
|
def test_ap_wpa2_psk_assoc_rsn(dev, apdev):
|
|
"""WPA2-PSK AP and association request RSN IE differences"""
|
|
ssid = "test-wpa2-psk"
|
|
passphrase = 'qwertyuiop'
|
|
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
|
|
tests = [ ("Normal wpa_supplicant assoc req RSN IE",
|
|
"30140100000fac040100000fac040100000fac020000"),
|
|
("RSN IE without RSN Capabilities",
|
|
"30120100000fac040100000fac040100000fac02") ]
|
|
for title, ie in tests:
|
|
logger.info(title)
|
|
set_test_assoc_ie(dev[0], ie)
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
|
|
tests = [ ("WPA IE instead of RSN IE and only RSN enabled on AP",
|
|
"dd160050f20101000050f20201000050f20201000050f202", 40),
|
|
("Empty RSN IE", "3000", 40),
|
|
("RSN IE with truncated Version", "300101", 40),
|
|
("RSN IE with only Version", "30020100", 43) ]
|
|
for title, ie, status in tests:
|
|
logger.info(title)
|
|
set_test_assoc_ie(dev[0], ie)
|
|
dev[0].connect(ssid, psk=passphrase, scan_freq="2412",
|
|
wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-ASSOC-REJECT"])
|
|
if ev is None:
|
|
raise Exception("Association rejection not reported")
|
|
if "status_code=" + str(status) not in ev:
|
|
raise Exception("Unexpected status code: " + ev)
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].dump_monitor()
|