fragattacks/wpa_supplicant/mesh.c
Masashi Honma 3e949655cc Revert "mesh: Apply channel attributes before setup interface"
This reverts commit 2564184440.

Commit 2564184440 ("mesh: Apply channel attributes before setup
interface") triggers some channel configurations to result in leaking
memory. This seems to be caused by hapd->started not getting set when
going through a callback to start hostapd operation (e.g., when using
HT40 coex scan) due to hostapd_setup_bss() not getting called. This
results in hostapd_free_hapd_data() not clearing allocated
hapd->wpa_auth. This can be reproduced with the hwsim test case
mesh_secure_ocv_mix_legacy.

A more complete cleanup of the pending mesh patch for DFS support seems
to be needed to fix this properly, so the best approach for now is to
revert this patch and bring it back once rest of the mesh changes are
ready to be applied.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-21 23:43:12 +02:00

711 lines
19 KiB
C

/*
* WPA Supplicant - Basic mesh mode routines
* Copyright (c) 2013-2014, cozybit, Inc. All rights reserved.
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "utils/includes.h"
#include "utils/common.h"
#include "utils/eloop.h"
#include "utils/uuid.h"
#include "common/ieee802_11_defs.h"
#include "common/wpa_ctrl.h"
#include "ap/sta_info.h"
#include "ap/hostapd.h"
#include "ap/ieee802_11.h"
#include "config_ssid.h"
#include "config.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#include "notify.h"
#include "ap.h"
#include "mesh_mpm.h"
#include "mesh_rsn.h"
#include "mesh.h"
static void wpa_supplicant_mesh_deinit(struct wpa_supplicant *wpa_s)
{
wpa_supplicant_mesh_iface_deinit(wpa_s, wpa_s->ifmsh);
wpa_s->ifmsh = NULL;
wpa_s->current_ssid = NULL;
os_free(wpa_s->mesh_rsn);
wpa_s->mesh_rsn = NULL;
os_free(wpa_s->mesh_params);
wpa_s->mesh_params = NULL;
/* TODO: leave mesh (stop beacon). This will happen on link down
* anyway, so it's not urgent */
}
void wpa_supplicant_mesh_iface_deinit(struct wpa_supplicant *wpa_s,
struct hostapd_iface *ifmsh)
{
if (!ifmsh)
return;
if (ifmsh->mconf) {
mesh_mpm_deinit(wpa_s, ifmsh);
if (ifmsh->mconf->rsn_ie) {
ifmsh->mconf->rsn_ie = NULL;
/* We cannot free this struct
* because wpa_authenticator on
* hostapd side is also using it
* for now just set to NULL and
* let hostapd code free it.
*/
}
os_free(ifmsh->mconf);
ifmsh->mconf = NULL;
}
/* take care of shared data */
hostapd_interface_deinit(ifmsh);
hostapd_interface_free(ifmsh);
}
static struct mesh_conf * mesh_config_create(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid)
{
struct mesh_conf *conf;
int cipher;
conf = os_zalloc(sizeof(struct mesh_conf));
if (!conf)
return NULL;
os_memcpy(conf->meshid, ssid->ssid, ssid->ssid_len);
conf->meshid_len = ssid->ssid_len;
if (ssid->key_mgmt & WPA_KEY_MGMT_SAE)
conf->security |= MESH_CONF_SEC_AUTH |
MESH_CONF_SEC_AMPE;
else
conf->security |= MESH_CONF_SEC_NONE;
#ifdef CONFIG_IEEE80211W
conf->ieee80211w = ssid->ieee80211w;
if (conf->ieee80211w == MGMT_FRAME_PROTECTION_DEFAULT) {
if (wpa_s->drv_enc & WPA_DRIVER_CAPA_ENC_BIP)
conf->ieee80211w = wpa_s->conf->pmf;
else
conf->ieee80211w = NO_MGMT_FRAME_PROTECTION;
}
#endif /* CONFIG_IEEE80211W */
#ifdef CONFIG_OCV
conf->ocv = ssid->ocv;
#endif /* CONFIG_OCV */
cipher = wpa_pick_pairwise_cipher(ssid->pairwise_cipher, 0);
if (cipher < 0 || cipher == WPA_CIPHER_TKIP) {
wpa_msg(wpa_s, MSG_INFO, "mesh: Invalid pairwise cipher");
os_free(conf);
return NULL;
}
conf->pairwise_cipher = cipher;
cipher = wpa_pick_group_cipher(ssid->group_cipher);
if (cipher < 0 || cipher == WPA_CIPHER_TKIP ||
cipher == WPA_CIPHER_GTK_NOT_USED) {
wpa_msg(wpa_s, MSG_INFO, "mesh: Invalid group cipher");
os_free(conf);
return NULL;
}
conf->group_cipher = cipher;
if (conf->ieee80211w != NO_MGMT_FRAME_PROTECTION)
conf->mgmt_group_cipher = WPA_CIPHER_AES_128_CMAC;
/* defaults */
conf->mesh_pp_id = MESH_PATH_PROTOCOL_HWMP;
conf->mesh_pm_id = MESH_PATH_METRIC_AIRTIME;
conf->mesh_cc_id = 0;
conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
conf->dot11MeshHoldingTimeout = ssid->dot11MeshHoldingTimeout;
return conf;
}
static void wpas_mesh_copy_groups(struct hostapd_data *bss,
struct wpa_supplicant *wpa_s)
{
int num_groups;
size_t groups_size;
for (num_groups = 0; wpa_s->conf->sae_groups[num_groups] > 0;
num_groups++)
;
groups_size = (num_groups + 1) * sizeof(wpa_s->conf->sae_groups[0]);
bss->conf->sae_groups = os_malloc(groups_size);
if (bss->conf->sae_groups)
os_memcpy(bss->conf->sae_groups, wpa_s->conf->sae_groups,
groups_size);
}
static int wpas_mesh_init_rsn(struct wpa_supplicant *wpa_s)
{
struct hostapd_iface *ifmsh = wpa_s->ifmsh;
struct wpa_ssid *ssid = wpa_s->current_ssid;
struct hostapd_data *bss = ifmsh->bss[0];
static int default_groups[] = { 19, 20, 21, 25, 26, -1 };
const char *password;
size_t len;
password = ssid->sae_password;
if (!password)
password = ssid->passphrase;
if (!password) {
wpa_printf(MSG_ERROR,
"mesh: Passphrase for SAE not configured");
return -1;
}
bss->conf->wpa = ssid->proto;
bss->conf->wpa_key_mgmt = ssid->key_mgmt;
if (wpa_s->conf->sae_groups && wpa_s->conf->sae_groups[0] > 0) {
wpas_mesh_copy_groups(bss, wpa_s);
} else {
bss->conf->sae_groups = os_memdup(default_groups,
sizeof(default_groups));
if (!bss->conf->sae_groups)
return -1;
}
len = os_strlen(password);
bss->conf->ssid.wpa_passphrase = dup_binstr(password, len);
wpa_s->mesh_rsn = mesh_rsn_auth_init(wpa_s, ifmsh->mconf);
return !wpa_s->mesh_rsn ? -1 : 0;
}
static int wpas_mesh_complete(struct wpa_supplicant *wpa_s)
{
struct hostapd_iface *ifmsh = wpa_s->ifmsh;
struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
struct wpa_ssid *ssid = wpa_s->current_ssid;
int ret;
if (!params || !ssid) {
wpa_printf(MSG_ERROR, "mesh: %s called without active mesh",
__func__);
return -1;
}
if (ifmsh->mconf->security != MESH_CONF_SEC_NONE &&
wpas_mesh_init_rsn(wpa_s)) {
wpa_printf(MSG_ERROR,
"mesh: RSN initialization failed - deinit mesh");
wpa_supplicant_mesh_deinit(wpa_s);
return -1;
}
if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
wpa_s->pairwise_cipher = wpa_s->mesh_rsn->pairwise_cipher;
wpa_s->group_cipher = wpa_s->mesh_rsn->group_cipher;
wpa_s->mgmt_group_cipher = wpa_s->mesh_rsn->mgmt_group_cipher;
}
if (ifmsh) {
params->ies = ifmsh->mconf->rsn_ie;
params->ie_len = ifmsh->mconf->rsn_ie_len;
params->basic_rates = ifmsh->basic_rates;
params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE;
params->conf.ht_opmode = ifmsh->bss[0]->iface->ht_op_mode;
}
wpa_msg(wpa_s, MSG_INFO, "joining mesh %s",
wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
ret = wpa_drv_join_mesh(wpa_s, params);
if (ret)
wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d", ret);
/* hostapd sets the interface down until we associate */
wpa_drv_set_operstate(wpa_s, 1);
if (!ret)
wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
return ret;
}
static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid,
struct hostapd_freq_params *freq)
{
struct hostapd_iface *ifmsh;
struct hostapd_data *bss;
struct hostapd_config *conf;
struct mesh_conf *mconf;
int basic_rates_erp[] = { 10, 20, 55, 60, 110, 120, 240, -1 };
int rate_len;
int frequency;
if (!wpa_s->conf->user_mpm) {
/* not much for us to do here */
wpa_msg(wpa_s, MSG_WARNING,
"user_mpm is not enabled in configuration");
return 0;
}
wpa_s->ifmsh = ifmsh = hostapd_alloc_iface();
if (!ifmsh)
return -ENOMEM;
ifmsh->drv_flags = wpa_s->drv_flags;
ifmsh->num_bss = 1;
ifmsh->bss = os_calloc(wpa_s->ifmsh->num_bss,
sizeof(struct hostapd_data *));
if (!ifmsh->bss)
goto out_free;
ifmsh->bss[0] = bss = hostapd_alloc_bss_data(NULL, NULL, NULL);
if (!bss)
goto out_free;
ifmsh->bss[0]->msg_ctx = wpa_s;
os_memcpy(bss->own_addr, wpa_s->own_addr, ETH_ALEN);
bss->driver = wpa_s->driver;
bss->drv_priv = wpa_s->drv_priv;
bss->iface = ifmsh;
bss->mesh_sta_free_cb = mesh_mpm_free_sta;
frequency = ssid->frequency;
if (frequency != freq->freq &&
frequency == freq->freq + freq->sec_channel_offset * 20) {
wpa_printf(MSG_DEBUG, "mesh: pri/sec channels switched");
frequency = freq->freq;
}
wpa_s->assoc_freq = frequency;
wpa_s->current_ssid = ssid;
/* setup an AP config for auth processing */
conf = hostapd_config_defaults();
if (!conf)
goto out_free;
bss->conf = *conf->bss;
bss->conf->start_disabled = 1;
bss->conf->mesh = MESH_ENABLED;
bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes,
wpa_s->hw.num_modes) && wpa_s->conf->country[0]) {
conf->ieee80211h = 1;
conf->ieee80211d = 1;
conf->country[0] = wpa_s->conf->country[0];
conf->country[1] = wpa_s->conf->country[1];
conf->country[2] = ' ';
}
bss->iconf = conf;
ifmsh->conf = conf;
ifmsh->bss[0]->max_plinks = wpa_s->conf->max_peer_links;
ifmsh->bss[0]->dot11RSNASAERetransPeriod =
wpa_s->conf->dot11RSNASAERetransPeriod;
os_strlcpy(bss->conf->iface, wpa_s->ifname, sizeof(bss->conf->iface));
mconf = mesh_config_create(wpa_s, ssid);
if (!mconf)
goto out_free;
ifmsh->mconf = mconf;
/* need conf->hw_mode for supported rates. */
conf->hw_mode = ieee80211_freq_to_chan(frequency, &conf->channel);
if (conf->hw_mode == NUM_HOSTAPD_MODES) {
wpa_printf(MSG_ERROR, "Unsupported mesh mode frequency: %d MHz",
frequency);
goto out_free;
}
if (ssid->ht40)
conf->secondary_channel = ssid->ht40;
if (conf->hw_mode == HOSTAPD_MODE_IEEE80211A && ssid->vht) {
if (ssid->max_oper_chwidth != DEFAULT_MAX_OPER_CHWIDTH)
conf->vht_oper_chwidth = ssid->max_oper_chwidth;
switch (conf->vht_oper_chwidth) {
case VHT_CHANWIDTH_80MHZ:
case VHT_CHANWIDTH_80P80MHZ:
ieee80211_freq_to_chan(
frequency,
&conf->vht_oper_centr_freq_seg0_idx);
conf->vht_oper_centr_freq_seg0_idx += ssid->ht40 * 2;
break;
case VHT_CHANWIDTH_160MHZ:
ieee80211_freq_to_chan(
frequency,
&conf->vht_oper_centr_freq_seg0_idx);
conf->vht_oper_centr_freq_seg0_idx += ssid->ht40 * 2;
conf->vht_oper_centr_freq_seg0_idx += 40 / 5;
break;
}
ieee80211_freq_to_chan(ssid->vht_center_freq2,
&conf->vht_oper_centr_freq_seg1_idx);
}
if (ssid->mesh_basic_rates == NULL) {
/*
* XXX: Hack! This is so an MPM which correctly sets the ERP
* mandatory rates as BSSBasicRateSet doesn't reject us. We
* could add a new hw_mode HOSTAPD_MODE_IEEE80211G_ERP, but
* this is way easier. This also makes our BSSBasicRateSet
* advertised in beacons match the one in peering frames, sigh.
*/
if (conf->hw_mode == HOSTAPD_MODE_IEEE80211G) {
conf->basic_rates = os_memdup(basic_rates_erp,
sizeof(basic_rates_erp));
if (!conf->basic_rates)
goto out_free;
}
} else {
rate_len = 0;
while (1) {
if (ssid->mesh_basic_rates[rate_len] < 1)
break;
rate_len++;
}
conf->basic_rates = os_calloc(rate_len + 1, sizeof(int));
if (conf->basic_rates == NULL)
goto out_free;
os_memcpy(conf->basic_rates, ssid->mesh_basic_rates,
rate_len * sizeof(int));
conf->basic_rates[rate_len] = -1;
}
if (wpa_drv_init_mesh(wpa_s)) {
wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
return -1;
}
if (hostapd_setup_interface(ifmsh)) {
wpa_printf(MSG_ERROR,
"Failed to initialize hostapd interface for mesh");
return -1;
}
wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
return 0;
out_free:
wpa_supplicant_mesh_deinit(wpa_s);
return -ENOMEM;
}
void wpa_mesh_notify_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
const u8 *ies, size_t ie_len)
{
struct ieee802_11_elems elems;
wpa_msg(wpa_s, MSG_INFO,
"new peer notification for " MACSTR, MAC2STR(addr));
if (ieee802_11_parse_elems(ies, ie_len, &elems, 0) == ParseFailed) {
wpa_msg(wpa_s, MSG_INFO, "Could not parse beacon from " MACSTR,
MAC2STR(addr));
return;
}
wpa_mesh_new_mesh_peer(wpa_s, addr, &elems);
}
void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
struct wpabuf **extra_ie)
{
/* EID + 0-length (wildcard) mesh-id */
size_t ielen = 2;
if (wpabuf_resize(extra_ie, ielen) == 0) {
wpabuf_put_u8(*extra_ie, WLAN_EID_MESH_ID);
wpabuf_put_u8(*extra_ie, 0);
}
}
int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid)
{
struct wpa_driver_mesh_join_params *params = os_zalloc(sizeof(*params));
int ret = 0;
if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency ||
!params) {
ret = -ENOENT;
os_free(params);
goto out;
}
wpa_supplicant_mesh_deinit(wpa_s);
wpa_s->pairwise_cipher = WPA_CIPHER_NONE;
wpa_s->group_cipher = WPA_CIPHER_NONE;
wpa_s->mgmt_group_cipher = 0;
params->meshid = ssid->ssid;
params->meshid_len = ssid->ssid_len;
ibss_mesh_setup_freq(wpa_s, ssid, &params->freq);
wpa_s->mesh_ht_enabled = !!params->freq.ht_enabled;
wpa_s->mesh_vht_enabled = !!params->freq.vht_enabled;
if (params->freq.ht_enabled && params->freq.sec_channel_offset)
ssid->ht40 = params->freq.sec_channel_offset;
if (wpa_s->mesh_vht_enabled) {
ssid->vht = 1;
ssid->vht_center_freq1 = params->freq.center_freq1;
switch (params->freq.bandwidth) {
case 80:
if (params->freq.center_freq2) {
ssid->max_oper_chwidth = VHT_CHANWIDTH_80P80MHZ;
ssid->vht_center_freq2 =
params->freq.center_freq2;
} else {
ssid->max_oper_chwidth = VHT_CHANWIDTH_80MHZ;
}
break;
case 160:
ssid->max_oper_chwidth = VHT_CHANWIDTH_160MHZ;
break;
default:
ssid->max_oper_chwidth = VHT_CHANWIDTH_USE_HT;
break;
}
}
if (ssid->beacon_int > 0)
params->beacon_int = ssid->beacon_int;
else if (wpa_s->conf->beacon_int > 0)
params->beacon_int = wpa_s->conf->beacon_int;
if (ssid->dtim_period > 0)
params->dtim_period = ssid->dtim_period;
else if (wpa_s->conf->dtim_period > 0)
params->dtim_period = wpa_s->conf->dtim_period;
params->conf.max_peer_links = wpa_s->conf->max_peer_links;
if (ssid->mesh_rssi_threshold < DEFAULT_MESH_RSSI_THRESHOLD) {
params->conf.rssi_threshold = ssid->mesh_rssi_threshold;
params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD;
}
if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
params->flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
params->flags |= WPA_DRIVER_MESH_FLAG_AMPE;
wpa_s->conf->user_mpm = 1;
}
if (wpa_s->conf->user_mpm) {
params->flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
params->conf.auto_plinks = 0;
} else {
params->flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
params->conf.auto_plinks = 1;
}
params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
os_free(wpa_s->mesh_params);
wpa_s->mesh_params = params;
if (wpa_supplicant_mesh_init(wpa_s, ssid, &params->freq)) {
wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
wpa_drv_leave_mesh(wpa_s);
ret = -1;
goto out;
}
ret = wpas_mesh_complete(wpa_s);
out:
return ret;
}
int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s)
{
int ret = 0;
wpa_msg(wpa_s, MSG_INFO, "leaving mesh");
/* Need to send peering close messages first */
wpa_supplicant_mesh_deinit(wpa_s);
ret = wpa_drv_leave_mesh(wpa_s);
if (ret)
wpa_msg(wpa_s, MSG_ERROR, "mesh leave error=%d", ret);
wpa_drv_set_operstate(wpa_s, 1);
return ret;
}
static int mesh_attr_text(const u8 *ies, size_t ies_len, char *buf, char *end)
{
struct ieee802_11_elems elems;
char *mesh_id, *pos = buf;
u8 *bss_basic_rate_set;
int bss_basic_rate_set_len, ret, i;
if (ieee802_11_parse_elems(ies, ies_len, &elems, 0) == ParseFailed)
return -1;
if (elems.mesh_id_len < 1)
return 0;
mesh_id = os_malloc(elems.mesh_id_len + 1);
if (mesh_id == NULL)
return -1;
os_memcpy(mesh_id, elems.mesh_id, elems.mesh_id_len);
mesh_id[elems.mesh_id_len] = '\0';
ret = os_snprintf(pos, end - pos, "mesh_id=%s\n", mesh_id);
os_free(mesh_id);
if (os_snprintf_error(end - pos, ret))
return pos - buf;
pos += ret;
if (elems.mesh_config_len > 6) {
ret = os_snprintf(pos, end - pos,
"active_path_selection_protocol_id=0x%02x\n"
"active_path_selection_metric_id=0x%02x\n"
"congestion_control_mode_id=0x%02x\n"
"synchronization_method_id=0x%02x\n"
"authentication_protocol_id=0x%02x\n"
"mesh_formation_info=0x%02x\n"
"mesh_capability=0x%02x\n",
elems.mesh_config[0], elems.mesh_config[1],
elems.mesh_config[2], elems.mesh_config[3],
elems.mesh_config[4], elems.mesh_config[5],
elems.mesh_config[6]);
if (os_snprintf_error(end - pos, ret))
return pos - buf;
pos += ret;
}
bss_basic_rate_set = os_malloc(elems.supp_rates_len +
elems.ext_supp_rates_len);
if (bss_basic_rate_set == NULL)
return -1;
bss_basic_rate_set_len = 0;
for (i = 0; i < elems.supp_rates_len; i++) {
if (elems.supp_rates[i] & 0x80) {
bss_basic_rate_set[bss_basic_rate_set_len++] =
(elems.supp_rates[i] & 0x7f) * 5;
}
}
for (i = 0; i < elems.ext_supp_rates_len; i++) {
if (elems.ext_supp_rates[i] & 0x80) {
bss_basic_rate_set[bss_basic_rate_set_len++] =
(elems.ext_supp_rates[i] & 0x7f) * 5;
}
}
if (bss_basic_rate_set_len > 0) {
ret = os_snprintf(pos, end - pos, "bss_basic_rate_set=%d",
bss_basic_rate_set[0]);
if (os_snprintf_error(end - pos, ret))
goto fail;
pos += ret;
for (i = 1; i < bss_basic_rate_set_len; i++) {
ret = os_snprintf(pos, end - pos, " %d",
bss_basic_rate_set[i]);
if (os_snprintf_error(end - pos, ret))
goto fail;
pos += ret;
}
ret = os_snprintf(pos, end - pos, "\n");
if (os_snprintf_error(end - pos, ret))
goto fail;
pos += ret;
}
fail:
os_free(bss_basic_rate_set);
return pos - buf;
}
int wpas_mesh_scan_result_text(const u8 *ies, size_t ies_len, char *buf,
char *end)
{
return mesh_attr_text(ies, ies_len, buf, end);
}
static int wpas_mesh_get_ifname(struct wpa_supplicant *wpa_s, char *ifname,
size_t len)
{
char *ifname_ptr = wpa_s->ifname;
int res;
res = os_snprintf(ifname, len, "mesh-%s-%d", ifname_ptr,
wpa_s->mesh_if_idx);
if (os_snprintf_error(len, res) ||
(os_strlen(ifname) >= IFNAMSIZ &&
os_strlen(wpa_s->ifname) < IFNAMSIZ)) {
/* Try to avoid going over the IFNAMSIZ length limit */
res = os_snprintf(ifname, len, "mesh-%d", wpa_s->mesh_if_idx);
if (os_snprintf_error(len, res))
return -1;
}
wpa_s->mesh_if_idx++;
return 0;
}
int wpas_mesh_add_interface(struct wpa_supplicant *wpa_s, char *ifname,
size_t len)
{
struct wpa_interface iface;
struct wpa_supplicant *mesh_wpa_s;
u8 addr[ETH_ALEN];
if (ifname[0] == '\0' && wpas_mesh_get_ifname(wpa_s, ifname, len) < 0)
return -1;
if (wpa_drv_if_add(wpa_s, WPA_IF_MESH, ifname, NULL, NULL, NULL, addr,
NULL) < 0) {
wpa_printf(MSG_ERROR,
"mesh: Failed to create new mesh interface");
return -1;
}
wpa_printf(MSG_INFO, "mesh: Created virtual interface %s addr "
MACSTR, ifname, MAC2STR(addr));
os_memset(&iface, 0, sizeof(iface));
iface.ifname = ifname;
iface.driver = wpa_s->driver->name;
iface.driver_param = wpa_s->conf->driver_param;
iface.ctrl_interface = wpa_s->conf->ctrl_interface;
mesh_wpa_s = wpa_supplicant_add_iface(wpa_s->global, &iface, wpa_s);
if (!mesh_wpa_s) {
wpa_printf(MSG_ERROR,
"mesh: Failed to create new wpa_supplicant interface");
wpa_drv_if_remove(wpa_s, WPA_IF_MESH, ifname);
return -1;
}
mesh_wpa_s->mesh_if_created = 1;
return 0;
}
int wpas_mesh_peer_remove(struct wpa_supplicant *wpa_s, const u8 *addr)
{
return mesh_mpm_close_peer(wpa_s, addr);
}
int wpas_mesh_peer_add(struct wpa_supplicant *wpa_s, const u8 *addr,
int duration)
{
return mesh_mpm_connect_peer(wpa_s, addr, duration);
}