mirror of
https://github.com/vanhoefm/fragattacks.git
synced 2024-11-28 10:18:21 -05:00
611d67a16e
doc/eap.doxygen was mentioning eap_method structure, but there was no reference as in doc/eap_server.doxygen on a similar paragraph Signed-off-by: Sergei Sinyak <serega.belarus@gmail.com>
88 lines
4.3 KiB
Plaintext
88 lines
4.3 KiB
Plaintext
/**
|
|
\page eap_peer_module EAP peer implementation
|
|
|
|
Extensible Authentication Protocol (EAP) is an authentication framework
|
|
defined in RFC 3748. wpa_supplicant uses a separate code module for EAP
|
|
peer implementation. This module was designed to use only a minimal set
|
|
of direct function calls (mainly, to debug/event functions) in order for
|
|
it to be usable in other programs. The design of the EAP
|
|
implementation is based loosely on RFC 4137. The state machine is
|
|
defined in this RFC and so is the interface between the peer state
|
|
machine and methods. As such, this RFC provides useful information for
|
|
understanding the EAP peer implementation in wpa_supplicant.
|
|
|
|
Some of the terminology used in EAP state machine is referring to
|
|
EAPOL (IEEE 802.1X), but there is no strict requirement on the lower
|
|
layer being IEEE 802.1X if EAP module is built for other programs than
|
|
wpa_supplicant. These terms should be understood to refer to the
|
|
lower layer as defined in RFC 4137.
|
|
|
|
|
|
\section adding_eap_methods Adding EAP methods
|
|
|
|
Each EAP method is implemented as a separate module, usually as one C
|
|
file named eap_<name of the method>.c, e.g., \ref eap_md5.c. All EAP
|
|
methods use the same interface between the peer state machine and
|
|
method specific functions. This allows new EAP methods to be added
|
|
without modifying the core EAP state machine implementation.
|
|
|
|
New EAP methods need to be registered by adding them into the build
|
|
(Makefile) and the EAP method registration list in the
|
|
\ref eap_peer_register_methods() function of \ref eap_methods.c. Each EAP
|
|
method should use a build-time configuration option, e.g., EAP_TLS, in
|
|
order to make it possible to select which of the methods are included
|
|
in the build.
|
|
|
|
EAP methods must implement the interface defined in \ref eap_i.h. struct
|
|
\ref eap_method defines the needed function pointers that each EAP method
|
|
must provide. In addition, the EAP type and name are registered using
|
|
this structure. This interface is based on section 4.4 of RFC 4137.
|
|
|
|
It is recommended that the EAP methods would use generic helper
|
|
functions, \ref eap_msg_alloc() and \ref eap_hdr_validate() when processing
|
|
messages. This allows code sharing and can avoid missing some of the
|
|
needed validation steps for received packets. In addition, these
|
|
functions make it easier to change between expanded and legacy EAP
|
|
header, if needed.
|
|
|
|
When adding an EAP method that uses a vendor specific EAP type
|
|
(Expanded Type as defined in RFC 3748, Chapter 5.7), the new method
|
|
must be registered by passing vendor id instead of EAP_VENDOR_IETF to
|
|
\ref eap_peer_method_alloc(). These methods must not try to emulate
|
|
expanded types by registering a legacy EAP method for type 254. See
|
|
\ref eap_vendor_test.c for an example of an EAP method implementation that
|
|
is implemented as an expanded type.
|
|
|
|
|
|
\section used_eap_library Using EAP implementation as a library
|
|
|
|
The Git repository has an eap_example directory that contains an
|
|
example showing how EAP peer and server code from wpa_supplicant and
|
|
hostapd can be used as a library. The example program initializes both
|
|
an EAP server and an EAP peer entities and then runs through an
|
|
EAP-PEAP/MSCHAPv2 authentication.
|
|
|
|
\ref eap_example_peer.c shows the initialization and glue code needed to
|
|
control the EAP peer implementation. \ref eap_example_server.c does the
|
|
same for EAP server. \ref eap_example.c is an example that ties in both the
|
|
EAP server and client parts to allow an EAP authentication to be
|
|
shown.
|
|
|
|
In this example, the EAP messages are passed between the server and
|
|
the peer are passed by direct function calls within the same process.
|
|
In practice, server and peer functionalities would likely reside in
|
|
separate devices and the EAP messages would be transmitted between the
|
|
devices based on an external protocol. For example, in IEEE 802.11
|
|
uses IEEE 802.1X EAPOL state machines to control the transmission of
|
|
EAP messages and WiMax supports optional PMK EAP authentication
|
|
mechanism that transmits EAP messages as defined in IEEE 802.16e.
|
|
|
|
The EAP library links in number of helper functions from \ref src/utils and
|
|
\ref src/crypto directories. Most of these are suitable as-is, but it may
|
|
be desirable to replace the debug output code in \ref src/utils/wpa_debug.c
|
|
by dropping this file from the library and re-implementing the
|
|
functions there in a way that better fits in with the main
|
|
application.
|
|
|
|
*/
|