fragattacks/src/ap/beacon.c
Kyeyoon Park ec8f36afca AP: Add support for BSS load element (STA Count, Channel Utilization)
The new "bss_load_update_period" parameter can be used to configure
hostapd to advertise its BSS Load element in Beacon and Probe Response
frames. This parameter is in the units of BUs (Beacon Units).

When enabled, the STA Count and the Channel Utilization value will be
updated periodically in the BSS Load element. The AAC is set to 0 sinze
explicit admission control is not supported. Channel Utilization is
calculated based on the channel survey information from the driver and
as such, requires a driver that supports providing that information for
the current operating channel.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-21 23:25:48 +03:00

1047 lines
28 KiB
C

/*
* hostapd / IEEE 802.11 Management: Beacon and Probe Request/Response
* Copyright (c) 2002-2004, Instant802 Networks, Inc.
* Copyright (c) 2005-2006, Devicescape Software, Inc.
* Copyright (c) 2008-2012, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "utils/includes.h"
#ifndef CONFIG_NATIVE_WINDOWS
#include "utils/common.h"
#include "common/ieee802_11_defs.h"
#include "common/ieee802_11_common.h"
#include "wps/wps_defs.h"
#include "p2p/p2p.h"
#include "hostapd.h"
#include "ieee802_11.h"
#include "wpa_auth.h"
#include "wmm.h"
#include "ap_config.h"
#include "sta_info.h"
#include "p2p_hostapd.h"
#include "ap_drv_ops.h"
#include "beacon.h"
#include "hs20.h"
#include "dfs.h"
#ifdef NEED_AP_MLME
static u8 * hostapd_eid_bss_load(struct hostapd_data *hapd, u8 *eid, size_t len)
{
if (len < 2 + 5)
return eid;
#ifdef CONFIG_TESTING_OPTIONS
if (hapd->conf->bss_load_test_set) {
*eid++ = WLAN_EID_BSS_LOAD;
*eid++ = 5;
os_memcpy(eid, hapd->conf->bss_load_test, 5);
eid += 5;
return eid;
}
#endif /* CONFIG_TESTING_OPTIONS */
if (hapd->conf->bss_load_update_period) {
*eid++ = WLAN_EID_BSS_LOAD;
*eid++ = 5;
WPA_PUT_LE16(eid, hapd->num_sta);
eid += 2;
*eid++ = hapd->iface->channel_utilization;
WPA_PUT_LE16(eid, 0); /* no available admission capabity */
eid += 2;
}
return eid;
}
static u8 ieee802_11_erp_info(struct hostapd_data *hapd)
{
u8 erp = 0;
if (hapd->iface->current_mode == NULL ||
hapd->iface->current_mode->mode != HOSTAPD_MODE_IEEE80211G)
return 0;
if (hapd->iface->olbc)
erp |= ERP_INFO_USE_PROTECTION;
if (hapd->iface->num_sta_non_erp > 0) {
erp |= ERP_INFO_NON_ERP_PRESENT |
ERP_INFO_USE_PROTECTION;
}
if (hapd->iface->num_sta_no_short_preamble > 0 ||
hapd->iconf->preamble == LONG_PREAMBLE)
erp |= ERP_INFO_BARKER_PREAMBLE_MODE;
return erp;
}
static u8 * hostapd_eid_ds_params(struct hostapd_data *hapd, u8 *eid)
{
*eid++ = WLAN_EID_DS_PARAMS;
*eid++ = 1;
*eid++ = hapd->iconf->channel;
return eid;
}
static u8 * hostapd_eid_erp_info(struct hostapd_data *hapd, u8 *eid)
{
if (hapd->iface->current_mode == NULL ||
hapd->iface->current_mode->mode != HOSTAPD_MODE_IEEE80211G)
return eid;
/* Set NonERP_present and use_protection bits if there
* are any associated NonERP stations. */
/* TODO: use_protection bit can be set to zero even if
* there are NonERP stations present. This optimization
* might be useful if NonERP stations are "quiet".
* See 802.11g/D6 E-1 for recommended practice.
* In addition, Non ERP present might be set, if AP detects Non ERP
* operation on other APs. */
/* Add ERP Information element */
*eid++ = WLAN_EID_ERP_INFO;
*eid++ = 1;
*eid++ = ieee802_11_erp_info(hapd);
return eid;
}
static u8 * hostapd_eid_pwr_constraint(struct hostapd_data *hapd, u8 *eid)
{
u8 *pos = eid;
u8 local_pwr_constraint = 0;
int dfs;
if (hapd->iface->current_mode == NULL ||
hapd->iface->current_mode->mode != HOSTAPD_MODE_IEEE80211A)
return eid;
/* Let host drivers add this IE if DFS support is offloaded */
if (hapd->iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)
return eid;
/*
* There is no DFS support and power constraint was not directly
* requested by config option.
*/
if (!hapd->iconf->ieee80211h &&
hapd->iconf->local_pwr_constraint == -1)
return eid;
/* Check if DFS is required by regulatory. */
dfs = hostapd_is_dfs_required(hapd->iface);
if (dfs < 0) {
wpa_printf(MSG_WARNING, "Failed to check if DFS is required; ret=%d",
dfs);
dfs = 0;
}
if (dfs == 0 && hapd->iconf->local_pwr_constraint == -1)
return eid;
/*
* ieee80211h (DFS) is enabled so Power Constraint element shall
* be added when running on DFS channel whenever local_pwr_constraint
* is configured or not. In order to meet regulations when TPC is not
* implemented using a transmit power that is below the legal maximum
* (including any mitigation factor) should help. In this case,
* indicate 3 dB below maximum allowed transmit power.
*/
if (hapd->iconf->local_pwr_constraint == -1)
local_pwr_constraint = 3;
/*
* A STA that is not an AP shall use a transmit power less than or
* equal to the local maximum transmit power level for the channel.
* The local maximum transmit power can be calculated from the formula:
* local max TX pwr = max TX pwr - local pwr constraint
* Where max TX pwr is maximum transmit power level specified for
* channel in Country element and local pwr constraint is specified
* for channel in this Power Constraint element.
*/
/* Element ID */
*pos++ = WLAN_EID_PWR_CONSTRAINT;
/* Length */
*pos++ = 1;
/* Local Power Constraint */
if (local_pwr_constraint)
*pos++ = local_pwr_constraint;
else
*pos++ = hapd->iconf->local_pwr_constraint;
return pos;
}
static u8 * hostapd_eid_country_add(u8 *pos, u8 *end, int chan_spacing,
struct hostapd_channel_data *start,
struct hostapd_channel_data *prev)
{
if (end - pos < 3)
return pos;
/* first channel number */
*pos++ = start->chan;
/* number of channels */
*pos++ = (prev->chan - start->chan) / chan_spacing + 1;
/* maximum transmit power level */
*pos++ = start->max_tx_power;
return pos;
}
static u8 * hostapd_eid_country(struct hostapd_data *hapd, u8 *eid,
int max_len)
{
u8 *pos = eid;
u8 *end = eid + max_len;
int i;
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *start, *prev;
int chan_spacing = 1;
if (!hapd->iconf->ieee80211d || max_len < 6 ||
hapd->iface->current_mode == NULL)
return eid;
*pos++ = WLAN_EID_COUNTRY;
pos++; /* length will be set later */
os_memcpy(pos, hapd->iconf->country, 3); /* e.g., 'US ' */
pos += 3;
mode = hapd->iface->current_mode;
if (mode->mode == HOSTAPD_MODE_IEEE80211A)
chan_spacing = 4;
start = prev = NULL;
for (i = 0; i < mode->num_channels; i++) {
struct hostapd_channel_data *chan = &mode->channels[i];
if (chan->flag & HOSTAPD_CHAN_DISABLED)
continue;
if (start && prev &&
prev->chan + chan_spacing == chan->chan &&
start->max_tx_power == chan->max_tx_power) {
prev = chan;
continue; /* can use same entry */
}
if (start && prev) {
pos = hostapd_eid_country_add(pos, end, chan_spacing,
start, prev);
start = NULL;
}
/* Start new group */
start = prev = chan;
}
if (start) {
pos = hostapd_eid_country_add(pos, end, chan_spacing,
start, prev);
}
if ((pos - eid) & 1) {
if (end - pos < 1)
return eid;
*pos++ = 0; /* pad for 16-bit alignment */
}
eid[1] = (pos - eid) - 2;
return pos;
}
static u8 * hostapd_eid_wpa(struct hostapd_data *hapd, u8 *eid, size_t len)
{
const u8 *ie;
size_t ielen;
ie = wpa_auth_get_wpa_ie(hapd->wpa_auth, &ielen);
if (ie == NULL || ielen > len)
return eid;
os_memcpy(eid, ie, ielen);
return eid + ielen;
}
static u8 * hostapd_eid_csa(struct hostapd_data *hapd, u8 *eid)
{
u8 chan;
if (!hapd->cs_freq_params.freq)
return eid;
if (ieee80211_freq_to_chan(hapd->cs_freq_params.freq, &chan) ==
NUM_HOSTAPD_MODES)
return eid;
*eid++ = WLAN_EID_CHANNEL_SWITCH;
*eid++ = 3;
*eid++ = hapd->cs_block_tx;
*eid++ = chan;
*eid++ = hapd->cs_count;
return eid;
}
static u8 * hostapd_eid_secondary_channel(struct hostapd_data *hapd, u8 *eid)
{
u8 sec_ch;
if (!hapd->cs_freq_params.sec_channel_offset)
return eid;
if (hapd->cs_freq_params.sec_channel_offset == -1)
sec_ch = HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW;
else if (hapd->cs_freq_params.sec_channel_offset == 1)
sec_ch = HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE;
else
return eid;
*eid++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET;
*eid++ = 1;
*eid++ = sec_ch;
return eid;
}
static u8 * hostapd_add_csa_elems(struct hostapd_data *hapd, u8 *pos,
u8 *start, unsigned int *csa_counter_off)
{
u8 *old_pos = pos;
if (!csa_counter_off)
return pos;
*csa_counter_off = 0;
pos = hostapd_eid_csa(hapd, pos);
if (pos != old_pos) {
/* save an offset to the counter - should be last byte */
*csa_counter_off = pos - start - 1;
pos = hostapd_eid_secondary_channel(hapd, pos);
}
return pos;
}
static u8 * hostapd_gen_probe_resp(struct hostapd_data *hapd,
struct sta_info *sta,
const struct ieee80211_mgmt *req,
int is_p2p, size_t *resp_len)
{
struct ieee80211_mgmt *resp;
u8 *pos, *epos;
size_t buflen;
#define MAX_PROBERESP_LEN 768
buflen = MAX_PROBERESP_LEN;
#ifdef CONFIG_WPS
if (hapd->wps_probe_resp_ie)
buflen += wpabuf_len(hapd->wps_probe_resp_ie);
#endif /* CONFIG_WPS */
#ifdef CONFIG_P2P
if (hapd->p2p_probe_resp_ie)
buflen += wpabuf_len(hapd->p2p_probe_resp_ie);
#endif /* CONFIG_P2P */
if (hapd->conf->vendor_elements)
buflen += wpabuf_len(hapd->conf->vendor_elements);
resp = os_zalloc(buflen);
if (resp == NULL)
return NULL;
epos = ((u8 *) resp) + MAX_PROBERESP_LEN;
resp->frame_control = IEEE80211_FC(WLAN_FC_TYPE_MGMT,
WLAN_FC_STYPE_PROBE_RESP);
if (req)
os_memcpy(resp->da, req->sa, ETH_ALEN);
os_memcpy(resp->sa, hapd->own_addr, ETH_ALEN);
os_memcpy(resp->bssid, hapd->own_addr, ETH_ALEN);
resp->u.probe_resp.beacon_int =
host_to_le16(hapd->iconf->beacon_int);
/* hardware or low-level driver will setup seq_ctrl and timestamp */
resp->u.probe_resp.capab_info =
host_to_le16(hostapd_own_capab_info(hapd, sta, 1));
pos = resp->u.probe_resp.variable;
*pos++ = WLAN_EID_SSID;
*pos++ = hapd->conf->ssid.ssid_len;
os_memcpy(pos, hapd->conf->ssid.ssid, hapd->conf->ssid.ssid_len);
pos += hapd->conf->ssid.ssid_len;
/* Supported rates */
pos = hostapd_eid_supp_rates(hapd, pos);
/* DS Params */
pos = hostapd_eid_ds_params(hapd, pos);
pos = hostapd_eid_country(hapd, pos, epos - pos);
/* Power Constraint element */
pos = hostapd_eid_pwr_constraint(hapd, pos);
/* ERP Information element */
pos = hostapd_eid_erp_info(hapd, pos);
/* Extended supported rates */
pos = hostapd_eid_ext_supp_rates(hapd, pos);
/* RSN, MDIE, WPA */
pos = hostapd_eid_wpa(hapd, pos, epos - pos);
pos = hostapd_eid_bss_load(hapd, pos, epos - pos);
#ifdef CONFIG_IEEE80211N
pos = hostapd_eid_ht_capabilities(hapd, pos);
pos = hostapd_eid_ht_operation(hapd, pos);
#endif /* CONFIG_IEEE80211N */
pos = hostapd_eid_ext_capab(hapd, pos);
pos = hostapd_eid_time_adv(hapd, pos);
pos = hostapd_eid_time_zone(hapd, pos);
pos = hostapd_eid_interworking(hapd, pos);
pos = hostapd_eid_adv_proto(hapd, pos);
pos = hostapd_eid_roaming_consortium(hapd, pos);
pos = hostapd_add_csa_elems(hapd, pos, (u8 *)resp,
&hapd->cs_c_off_proberesp);
#ifdef CONFIG_IEEE80211AC
pos = hostapd_eid_vht_capabilities(hapd, pos);
pos = hostapd_eid_vht_operation(hapd, pos);
#endif /* CONFIG_IEEE80211AC */
/* Wi-Fi Alliance WMM */
pos = hostapd_eid_wmm(hapd, pos);
#ifdef CONFIG_WPS
if (hapd->conf->wps_state && hapd->wps_probe_resp_ie) {
os_memcpy(pos, wpabuf_head(hapd->wps_probe_resp_ie),
wpabuf_len(hapd->wps_probe_resp_ie));
pos += wpabuf_len(hapd->wps_probe_resp_ie);
}
#endif /* CONFIG_WPS */
#ifdef CONFIG_P2P
if ((hapd->conf->p2p & P2P_ENABLED) && is_p2p &&
hapd->p2p_probe_resp_ie) {
os_memcpy(pos, wpabuf_head(hapd->p2p_probe_resp_ie),
wpabuf_len(hapd->p2p_probe_resp_ie));
pos += wpabuf_len(hapd->p2p_probe_resp_ie);
}
#endif /* CONFIG_P2P */
#ifdef CONFIG_P2P_MANAGER
if ((hapd->conf->p2p & (P2P_MANAGE | P2P_ENABLED | P2P_GROUP_OWNER)) ==
P2P_MANAGE)
pos = hostapd_eid_p2p_manage(hapd, pos);
#endif /* CONFIG_P2P_MANAGER */
#ifdef CONFIG_HS20
pos = hostapd_eid_hs20_indication(hapd, pos);
pos = hostapd_eid_osen(hapd, pos);
#endif /* CONFIG_HS20 */
if (hapd->conf->vendor_elements) {
os_memcpy(pos, wpabuf_head(hapd->conf->vendor_elements),
wpabuf_len(hapd->conf->vendor_elements));
pos += wpabuf_len(hapd->conf->vendor_elements);
}
*resp_len = pos - (u8 *) resp;
return (u8 *) resp;
}
enum ssid_match_result {
NO_SSID_MATCH,
EXACT_SSID_MATCH,
WILDCARD_SSID_MATCH
};
static enum ssid_match_result ssid_match(struct hostapd_data *hapd,
const u8 *ssid, size_t ssid_len,
const u8 *ssid_list,
size_t ssid_list_len)
{
const u8 *pos, *end;
int wildcard = 0;
if (ssid_len == 0)
wildcard = 1;
if (ssid_len == hapd->conf->ssid.ssid_len &&
os_memcmp(ssid, hapd->conf->ssid.ssid, ssid_len) == 0)
return EXACT_SSID_MATCH;
if (ssid_list == NULL)
return wildcard ? WILDCARD_SSID_MATCH : NO_SSID_MATCH;
pos = ssid_list;
end = ssid_list + ssid_list_len;
while (pos + 1 <= end) {
if (pos + 2 + pos[1] > end)
break;
if (pos[1] == 0)
wildcard = 1;
if (pos[1] == hapd->conf->ssid.ssid_len &&
os_memcmp(pos + 2, hapd->conf->ssid.ssid, pos[1]) == 0)
return EXACT_SSID_MATCH;
pos += 2 + pos[1];
}
return wildcard ? WILDCARD_SSID_MATCH : NO_SSID_MATCH;
}
void handle_probe_req(struct hostapd_data *hapd,
const struct ieee80211_mgmt *mgmt, size_t len,
int ssi_signal)
{
u8 *resp;
struct ieee802_11_elems elems;
const u8 *ie;
size_t ie_len;
struct sta_info *sta = NULL;
size_t i, resp_len;
int noack;
enum ssid_match_result res;
ie = mgmt->u.probe_req.variable;
if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.probe_req))
return;
ie_len = len - (IEEE80211_HDRLEN + sizeof(mgmt->u.probe_req));
for (i = 0; hapd->probereq_cb && i < hapd->num_probereq_cb; i++)
if (hapd->probereq_cb[i].cb(hapd->probereq_cb[i].ctx,
mgmt->sa, mgmt->da, mgmt->bssid,
ie, ie_len, ssi_signal) > 0)
return;
if (!hapd->iconf->send_probe_response)
return;
if (ieee802_11_parse_elems(ie, ie_len, &elems, 0) == ParseFailed) {
wpa_printf(MSG_DEBUG, "Could not parse ProbeReq from " MACSTR,
MAC2STR(mgmt->sa));
return;
}
if ((!elems.ssid || !elems.supp_rates)) {
wpa_printf(MSG_DEBUG, "STA " MACSTR " sent probe request "
"without SSID or supported rates element",
MAC2STR(mgmt->sa));
return;
}
#ifdef CONFIG_P2P
if (hapd->p2p && elems.wps_ie) {
struct wpabuf *wps;
wps = ieee802_11_vendor_ie_concat(ie, ie_len, WPS_DEV_OUI_WFA);
if (wps && !p2p_group_match_dev_type(hapd->p2p_group, wps)) {
wpa_printf(MSG_MSGDUMP, "P2P: Ignore Probe Request "
"due to mismatch with Requested Device "
"Type");
wpabuf_free(wps);
return;
}
wpabuf_free(wps);
}
if (hapd->p2p && elems.p2p) {
struct wpabuf *p2p;
p2p = ieee802_11_vendor_ie_concat(ie, ie_len, P2P_IE_VENDOR_TYPE);
if (p2p && !p2p_group_match_dev_id(hapd->p2p_group, p2p)) {
wpa_printf(MSG_MSGDUMP, "P2P: Ignore Probe Request "
"due to mismatch with Device ID");
wpabuf_free(p2p);
return;
}
wpabuf_free(p2p);
}
#endif /* CONFIG_P2P */
if (hapd->conf->ignore_broadcast_ssid && elems.ssid_len == 0 &&
elems.ssid_list_len == 0) {
wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR " for "
"broadcast SSID ignored", MAC2STR(mgmt->sa));
return;
}
sta = ap_get_sta(hapd, mgmt->sa);
#ifdef CONFIG_P2P
if ((hapd->conf->p2p & P2P_GROUP_OWNER) &&
elems.ssid_len == P2P_WILDCARD_SSID_LEN &&
os_memcmp(elems.ssid, P2P_WILDCARD_SSID,
P2P_WILDCARD_SSID_LEN) == 0) {
/* Process P2P Wildcard SSID like Wildcard SSID */
elems.ssid_len = 0;
}
#endif /* CONFIG_P2P */
res = ssid_match(hapd, elems.ssid, elems.ssid_len,
elems.ssid_list, elems.ssid_list_len);
if (res != NO_SSID_MATCH) {
if (sta)
sta->ssid_probe = &hapd->conf->ssid;
} else {
if (!(mgmt->da[0] & 0x01)) {
wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR
" for foreign SSID '%s' (DA " MACSTR ")%s",
MAC2STR(mgmt->sa),
wpa_ssid_txt(elems.ssid, elems.ssid_len),
MAC2STR(mgmt->da),
elems.ssid_list ? " (SSID list)" : "");
}
return;
}
#ifdef CONFIG_INTERWORKING
if (hapd->conf->interworking &&
elems.interworking && elems.interworking_len >= 1) {
u8 ant = elems.interworking[0] & 0x0f;
if (ant != INTERWORKING_ANT_WILDCARD &&
ant != hapd->conf->access_network_type) {
wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR
" for mismatching ANT %u ignored",
MAC2STR(mgmt->sa), ant);
return;
}
}
if (hapd->conf->interworking && elems.interworking &&
(elems.interworking_len == 7 || elems.interworking_len == 9)) {
const u8 *hessid;
if (elems.interworking_len == 7)
hessid = elems.interworking + 1;
else
hessid = elems.interworking + 1 + 2;
if (!is_broadcast_ether_addr(hessid) &&
os_memcmp(hessid, hapd->conf->hessid, ETH_ALEN) != 0) {
wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR
" for mismatching HESSID " MACSTR
" ignored",
MAC2STR(mgmt->sa), MAC2STR(hessid));
return;
}
}
#endif /* CONFIG_INTERWORKING */
#ifdef CONFIG_P2P
if ((hapd->conf->p2p & P2P_GROUP_OWNER) &&
supp_rates_11b_only(&elems)) {
/* Indicates support for 11b rates only */
wpa_printf(MSG_EXCESSIVE, "P2P: Ignore Probe Request from "
MACSTR " with only 802.11b rates",
MAC2STR(mgmt->sa));
return;
}
#endif /* CONFIG_P2P */
/* TODO: verify that supp_rates contains at least one matching rate
* with AP configuration */
#ifdef CONFIG_TESTING_OPTIONS
if (hapd->iconf->ignore_probe_probability > 0.0 &&
drand48() < hapd->iconf->ignore_probe_probability) {
wpa_printf(MSG_INFO,
"TESTING: ignoring probe request from " MACSTR,
MAC2STR(mgmt->sa));
return;
}
#endif /* CONFIG_TESTING_OPTIONS */
resp = hostapd_gen_probe_resp(hapd, sta, mgmt, elems.p2p != NULL,
&resp_len);
if (resp == NULL)
return;
/*
* If this is a broadcast probe request, apply no ack policy to avoid
* excessive retries.
*/
noack = !!(res == WILDCARD_SSID_MATCH &&
is_broadcast_ether_addr(mgmt->da));
if (hostapd_drv_send_mlme(hapd, resp, resp_len, noack) < 0)
wpa_printf(MSG_INFO, "handle_probe_req: send failed");
os_free(resp);
wpa_printf(MSG_EXCESSIVE, "STA " MACSTR " sent probe request for %s "
"SSID", MAC2STR(mgmt->sa),
elems.ssid_len == 0 ? "broadcast" : "our");
}
static u8 * hostapd_probe_resp_offloads(struct hostapd_data *hapd,
size_t *resp_len)
{
/* check probe response offloading caps and print warnings */
if (!(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_PROBE_RESP_OFFLOAD))
return NULL;
#ifdef CONFIG_WPS
if (hapd->conf->wps_state && hapd->wps_probe_resp_ie &&
(!(hapd->iface->probe_resp_offloads &
(WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS |
WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS2))))
wpa_printf(MSG_WARNING, "Device is trying to offload WPS "
"Probe Response while not supporting this");
#endif /* CONFIG_WPS */
#ifdef CONFIG_P2P
if ((hapd->conf->p2p & P2P_ENABLED) && hapd->p2p_probe_resp_ie &&
!(hapd->iface->probe_resp_offloads &
WPA_DRIVER_PROBE_RESP_OFFLOAD_P2P))
wpa_printf(MSG_WARNING, "Device is trying to offload P2P "
"Probe Response while not supporting this");
#endif /* CONFIG_P2P */
if (hapd->conf->interworking &&
!(hapd->iface->probe_resp_offloads &
WPA_DRIVER_PROBE_RESP_OFFLOAD_INTERWORKING))
wpa_printf(MSG_WARNING, "Device is trying to offload "
"Interworking Probe Response while not supporting "
"this");
/* Generate a Probe Response template for the non-P2P case */
return hostapd_gen_probe_resp(hapd, NULL, NULL, 0, resp_len);
}
#endif /* NEED_AP_MLME */
int ieee802_11_build_ap_params(struct hostapd_data *hapd,
struct wpa_driver_ap_params *params)
{
struct ieee80211_mgmt *head = NULL;
u8 *tail = NULL;
size_t head_len = 0, tail_len = 0;
u8 *resp = NULL;
size_t resp_len = 0;
#ifdef NEED_AP_MLME
u16 capab_info;
u8 *pos, *tailpos;
#define BEACON_HEAD_BUF_SIZE 256
#define BEACON_TAIL_BUF_SIZE 512
head = os_zalloc(BEACON_HEAD_BUF_SIZE);
tail_len = BEACON_TAIL_BUF_SIZE;
#ifdef CONFIG_WPS
if (hapd->conf->wps_state && hapd->wps_beacon_ie)
tail_len += wpabuf_len(hapd->wps_beacon_ie);
#endif /* CONFIG_WPS */
#ifdef CONFIG_P2P
if (hapd->p2p_beacon_ie)
tail_len += wpabuf_len(hapd->p2p_beacon_ie);
#endif /* CONFIG_P2P */
if (hapd->conf->vendor_elements)
tail_len += wpabuf_len(hapd->conf->vendor_elements);
tailpos = tail = os_malloc(tail_len);
if (head == NULL || tail == NULL) {
wpa_printf(MSG_ERROR, "Failed to set beacon data");
os_free(head);
os_free(tail);
return -1;
}
head->frame_control = IEEE80211_FC(WLAN_FC_TYPE_MGMT,
WLAN_FC_STYPE_BEACON);
head->duration = host_to_le16(0);
os_memset(head->da, 0xff, ETH_ALEN);
os_memcpy(head->sa, hapd->own_addr, ETH_ALEN);
os_memcpy(head->bssid, hapd->own_addr, ETH_ALEN);
head->u.beacon.beacon_int =
host_to_le16(hapd->iconf->beacon_int);
/* hardware or low-level driver will setup seq_ctrl and timestamp */
capab_info = hostapd_own_capab_info(hapd, NULL, 0);
head->u.beacon.capab_info = host_to_le16(capab_info);
pos = &head->u.beacon.variable[0];
/* SSID */
*pos++ = WLAN_EID_SSID;
if (hapd->conf->ignore_broadcast_ssid == 2) {
/* clear the data, but keep the correct length of the SSID */
*pos++ = hapd->conf->ssid.ssid_len;
os_memset(pos, 0, hapd->conf->ssid.ssid_len);
pos += hapd->conf->ssid.ssid_len;
} else if (hapd->conf->ignore_broadcast_ssid) {
*pos++ = 0; /* empty SSID */
} else {
*pos++ = hapd->conf->ssid.ssid_len;
os_memcpy(pos, hapd->conf->ssid.ssid,
hapd->conf->ssid.ssid_len);
pos += hapd->conf->ssid.ssid_len;
}
/* Supported rates */
pos = hostapd_eid_supp_rates(hapd, pos);
/* DS Params */
pos = hostapd_eid_ds_params(hapd, pos);
head_len = pos - (u8 *) head;
tailpos = hostapd_eid_country(hapd, tailpos,
tail + BEACON_TAIL_BUF_SIZE - tailpos);
/* Power Constraint element */
tailpos = hostapd_eid_pwr_constraint(hapd, tailpos);
/* ERP Information element */
tailpos = hostapd_eid_erp_info(hapd, tailpos);
/* Extended supported rates */
tailpos = hostapd_eid_ext_supp_rates(hapd, tailpos);
/* RSN, MDIE, WPA */
tailpos = hostapd_eid_wpa(hapd, tailpos, tail + BEACON_TAIL_BUF_SIZE -
tailpos);
tailpos = hostapd_eid_bss_load(hapd, tailpos,
tail + BEACON_TAIL_BUF_SIZE - tailpos);
#ifdef CONFIG_IEEE80211N
tailpos = hostapd_eid_ht_capabilities(hapd, tailpos);
tailpos = hostapd_eid_ht_operation(hapd, tailpos);
#endif /* CONFIG_IEEE80211N */
tailpos = hostapd_eid_ext_capab(hapd, tailpos);
/*
* TODO: Time Advertisement element should only be included in some
* DTIM Beacon frames.
*/
tailpos = hostapd_eid_time_adv(hapd, tailpos);
tailpos = hostapd_eid_interworking(hapd, tailpos);
tailpos = hostapd_eid_adv_proto(hapd, tailpos);
tailpos = hostapd_eid_roaming_consortium(hapd, tailpos);
tailpos = hostapd_add_csa_elems(hapd, tailpos, tail,
&hapd->cs_c_off_beacon);
#ifdef CONFIG_IEEE80211AC
tailpos = hostapd_eid_vht_capabilities(hapd, tailpos);
tailpos = hostapd_eid_vht_operation(hapd, tailpos);
#endif /* CONFIG_IEEE80211AC */
/* Wi-Fi Alliance WMM */
tailpos = hostapd_eid_wmm(hapd, tailpos);
#ifdef CONFIG_WPS
if (hapd->conf->wps_state && hapd->wps_beacon_ie) {
os_memcpy(tailpos, wpabuf_head(hapd->wps_beacon_ie),
wpabuf_len(hapd->wps_beacon_ie));
tailpos += wpabuf_len(hapd->wps_beacon_ie);
}
#endif /* CONFIG_WPS */
#ifdef CONFIG_P2P
if ((hapd->conf->p2p & P2P_ENABLED) && hapd->p2p_beacon_ie) {
os_memcpy(tailpos, wpabuf_head(hapd->p2p_beacon_ie),
wpabuf_len(hapd->p2p_beacon_ie));
tailpos += wpabuf_len(hapd->p2p_beacon_ie);
}
#endif /* CONFIG_P2P */
#ifdef CONFIG_P2P_MANAGER
if ((hapd->conf->p2p & (P2P_MANAGE | P2P_ENABLED | P2P_GROUP_OWNER)) ==
P2P_MANAGE)
tailpos = hostapd_eid_p2p_manage(hapd, tailpos);
#endif /* CONFIG_P2P_MANAGER */
#ifdef CONFIG_HS20
tailpos = hostapd_eid_hs20_indication(hapd, tailpos);
tailpos = hostapd_eid_osen(hapd, tailpos);
#endif /* CONFIG_HS20 */
if (hapd->conf->vendor_elements) {
os_memcpy(tailpos, wpabuf_head(hapd->conf->vendor_elements),
wpabuf_len(hapd->conf->vendor_elements));
tailpos += wpabuf_len(hapd->conf->vendor_elements);
}
tail_len = tailpos > tail ? tailpos - tail : 0;
resp = hostapd_probe_resp_offloads(hapd, &resp_len);
#endif /* NEED_AP_MLME */
os_memset(params, 0, sizeof(*params));
params->head = (u8 *) head;
params->head_len = head_len;
params->tail = tail;
params->tail_len = tail_len;
params->proberesp = resp;
params->proberesp_len = resp_len;
params->dtim_period = hapd->conf->dtim_period;
params->beacon_int = hapd->iconf->beacon_int;
params->basic_rates = hapd->iface->basic_rates;
params->ssid = hapd->conf->ssid.ssid;
params->ssid_len = hapd->conf->ssid.ssid_len;
params->pairwise_ciphers = hapd->conf->wpa_pairwise |
hapd->conf->rsn_pairwise;
params->group_cipher = hapd->conf->wpa_group;
params->key_mgmt_suites = hapd->conf->wpa_key_mgmt;
params->auth_algs = hapd->conf->auth_algs;
params->wpa_version = hapd->conf->wpa;
params->privacy = hapd->conf->ssid.wep.keys_set || hapd->conf->wpa ||
(hapd->conf->ieee802_1x &&
(hapd->conf->default_wep_key_len ||
hapd->conf->individual_wep_key_len));
switch (hapd->conf->ignore_broadcast_ssid) {
case 0:
params->hide_ssid = NO_SSID_HIDING;
break;
case 1:
params->hide_ssid = HIDDEN_SSID_ZERO_LEN;
break;
case 2:
params->hide_ssid = HIDDEN_SSID_ZERO_CONTENTS;
break;
}
params->isolate = hapd->conf->isolate;
#ifdef NEED_AP_MLME
params->cts_protect = !!(ieee802_11_erp_info(hapd) &
ERP_INFO_USE_PROTECTION);
params->preamble = hapd->iface->num_sta_no_short_preamble == 0 &&
hapd->iconf->preamble == SHORT_PREAMBLE;
if (hapd->iface->current_mode &&
hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211G)
params->short_slot_time =
hapd->iface->num_sta_no_short_slot_time > 0 ? 0 : 1;
else
params->short_slot_time = -1;
if (!hapd->iconf->ieee80211n || hapd->conf->disable_11n)
params->ht_opmode = -1;
else
params->ht_opmode = hapd->iface->ht_op_mode;
#endif /* NEED_AP_MLME */
params->interworking = hapd->conf->interworking;
if (hapd->conf->interworking &&
!is_zero_ether_addr(hapd->conf->hessid))
params->hessid = hapd->conf->hessid;
params->access_network_type = hapd->conf->access_network_type;
params->ap_max_inactivity = hapd->conf->ap_max_inactivity;
#ifdef CONFIG_HS20
params->disable_dgaf = hapd->conf->disable_dgaf;
if (hapd->conf->osen) {
params->privacy = 1;
params->osen = 1;
}
#endif /* CONFIG_HS20 */
return 0;
}
void ieee802_11_free_ap_params(struct wpa_driver_ap_params *params)
{
os_free(params->tail);
params->tail = NULL;
os_free(params->head);
params->head = NULL;
os_free(params->proberesp);
params->proberesp = NULL;
}
int ieee802_11_set_beacon(struct hostapd_data *hapd)
{
struct wpa_driver_ap_params params;
struct hostapd_freq_params freq;
struct hostapd_iface *iface = hapd->iface;
struct hostapd_config *iconf = iface->conf;
struct wpabuf *beacon, *proberesp, *assocresp;
int res, ret = -1;
if (hapd->csa_in_progress) {
wpa_printf(MSG_ERROR, "Cannot set beacons during CSA period");
return -1;
}
hapd->beacon_set_done = 1;
if (ieee802_11_build_ap_params(hapd, &params) < 0)
return -1;
if (hostapd_build_ap_extra_ies(hapd, &beacon, &proberesp, &assocresp) <
0)
goto fail;
params.beacon_ies = beacon;
params.proberesp_ies = proberesp;
params.assocresp_ies = assocresp;
if (iface->current_mode &&
hostapd_set_freq_params(&freq, iconf->hw_mode, iface->freq,
iconf->channel, iconf->ieee80211n,
iconf->ieee80211ac,
iconf->secondary_channel,
iconf->vht_oper_chwidth,
iconf->vht_oper_centr_freq_seg0_idx,
iconf->vht_oper_centr_freq_seg1_idx,
iface->current_mode->vht_capab) == 0)
params.freq = &freq;
res = hostapd_drv_set_ap(hapd, &params);
hostapd_free_ap_extra_ies(hapd, beacon, proberesp, assocresp);
if (res)
wpa_printf(MSG_ERROR, "Failed to set beacon parameters");
else
ret = 0;
fail:
ieee802_11_free_ap_params(&params);
return ret;
}
int ieee802_11_set_beacons(struct hostapd_iface *iface)
{
size_t i;
int ret = 0;
for (i = 0; i < iface->num_bss; i++) {
if (iface->bss[i]->started &&
ieee802_11_set_beacon(iface->bss[i]) < 0)
ret = -1;
}
return ret;
}
/* only update beacons if started */
int ieee802_11_update_beacons(struct hostapd_iface *iface)
{
size_t i;
int ret = 0;
for (i = 0; i < iface->num_bss; i++) {
if (iface->bss[i]->beacon_set_done && iface->bss[i]->started &&
ieee802_11_set_beacon(iface->bss[i]) < 0)
ret = -1;
}
return ret;
}
#endif /* CONFIG_NATIVE_WINDOWS */