wpa_supplicant for Windows ========================== Copyright (c) 2003-2009, Jouni Malinen and contributors All Rights Reserved. This program is licensed under the BSD license (the one with advertisement clause removed). This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). wpa_supplicant has support for being used as a WPA/WPA2/IEEE 802.1X Supplicant on Windows. The current port requires that WinPcap (http://winpcap.polito.it/) is installed for accessing packets and the driver interface. Both release versions 3.0 and 3.1 are supported. The current port is still somewhat experimental. It has been tested mainly on Windows XP (SP2) with limited set of NDIS drivers. In addition, the current version has been reported to work with Windows 2000. All security modes have been verified to work (at least complete authentication and successfully ping a wired host): - plaintext - static WEP / open system authentication - static WEP / shared key authentication - IEEE 802.1X with dynamic WEP keys - WPA-PSK, TKIP, CCMP, TKIP+CCMP - WPA-EAP, TKIP, CCMP, TKIP+CCMP - WPA2-PSK, TKIP, CCMP, TKIP+CCMP - WPA2-EAP, TKIP, CCMP, TKIP+CCMP Binary version -------------- Compiled binary version of the wpa_supplicant and additional tools is available from http://w1.fi/wpa_supplicant/. These binaries can be used after installing WinPcap. wpa_gui uses Qt 4 framework and may need additional dynamic libraries (DLLs). These libraries are available from http://w1.fi/wpa_supplicant/qt4/wpa_gui-qt433-windows-dll.zip You can copy the DLL files from this ZIP package into the same directory with wpa_gui.exe to allow wpa_gui to be started. Building wpa_supplicant with mingw ---------------------------------- The default build setup for wpa_supplicant is to use MinGW and cross-compiling from Linux to MinGW/Windows. It should also be possible to build this under Windows using the MinGW tools, but that is not tested nor supported and is likely to require some changes to the Makefile unless cygwin is used. Building wpa_supplicant with MSVC --------------------------------- wpa_supplicant can be built with Microsoft Visual C++ compiler. This has been tested with Microsoft Visual C++ Toolkit 2003 and Visual Studio 2005 using the included nmake.mak as a Makefile for nmake. IDE can also be used by creating a project that includes the files and defines mentioned in nmake.mak. Example VS2005 solution and project files are included in vs2005 subdirectory. This can be used as a starting point for building the programs with VS2005 IDE. Visual Studio 2008 Express Edition is also able to use these project files. WinPcap development package is needed for the build and this can be downloaded from http://www.winpcap.org/install/bin/WpdPack_4_0_2.zip. The default nmake.mak expects this to be unpacked into C:\dev\WpdPack so that Include and Lib directories are in this directory. The files can be stored elsewhere as long as the WINPCAPDIR in nmake.mak is updated to match with the selected directory. In case a project file in the IDE is used, these Include and Lib directories need to be added to project properties as additional include/library directories. OpenSSL source package can be downloaded from http://www.openssl.org/source/openssl-0.9.8i.tar.gz and built and installed following instructions in INSTALL.W32. Note that if EAP-FAST support will be included in the wpa_supplicant, OpenSSL needs to be patched to# support it openssl-0.9.8i-tls-extensions.patch. The example nmake.mak file expects OpenSSL to be installed into C:\dev\openssl, but this directory can be modified by changing OPENSSLDIR variable in nmake.mak. If you do not need EAP-FAST support, you may also be able to use Win32 binary installation package of OpenSSL from http://www.slproweb.com/products/Win32OpenSSL.html instead of building the library yourself. In this case, you will need to copy Include and Lib directories in suitable directory, e.g., C:\dev\openssl for the default nmake.mak. Copy {Win32OpenSSLRoot}\include into C:\dev\openssl\include and make C:\dev\openssl\lib subdirectory with files from {Win32OpenSSLRoot}\VC (i.e., libeay*.lib and ssleay*.lib). This will end up using dynamically linked OpenSSL (i.e., .dll files are needed) for it. Alternative, you can copy files from {Win32OpenSSLRoot}\VC\static to create a static build (no OpenSSL .dll files needed). Building wpa_supplicant for cygwin ---------------------------------- wpa_supplicant can be built for cygwin by installing the needed development packages for cygwin. This includes things like compiler, make, openssl development package, etc. In addition, developer's pack for WinPcap (WPdpack.zip) from http://winpcap.polito.it/install/default.htm is needed. .config file should enable only one driver interface, CONFIG_DRIVER_NDIS. In addition, include directories may need to be added to match the system. An example configuration is available in defconfig. The library and include files for WinPcap will either need to be installed in compiler/linker default directories or their location will need to be adding to .config when building wpa_supplicant. Othen than this, the build should be more or less identical to Linux version, i.e., just run make after having created .config file. An additional tool, win_if_list.exe, can be built by running "make win_if_list". Building wpa_gui ---------------- wpa_gui uses Qt application framework from Trolltech. It can be built with the open source version of Qt4 and MinGW. Following commands can be used to build the binary in the Qt 4 Command Prompt: # go to the root directory of wpa_supplicant source code cd wpa_gui-qt4 qmake -o Makefile wpa_gui.pro make # the wpa_gui.exe binary is created into 'release' subdirectory Using wpa_supplicant for Windows -------------------------------- wpa_supplicant, wpa_cli, and wpa_gui behave more or less identically to Linux version, so instructions in README and example wpa_supplicant.conf should be applicable for most parts. In addition, there is another version of wpa_supplicant, wpasvc.exe, which can be used as a Windows service and which reads its configuration from registry instead of text file. When using access points in "hidden SSID" mode, ap_scan=2 mode need to be used (see wpa_supplicant.conf for more information). Windows NDIS/WinPcap uses quite long interface names, so some care will be needed when starting wpa_supplicant. Alternatively, the adapter description can be used as the interface name which may be easier since it is usually in more human-readable format. win_if_list.exe can be used to find out the proper interface name. Example steps in starting up wpa_supplicant: # win_if_list.exe ifname: \Device\NPF_GenericNdisWanAdapter description: Generic NdisWan adapter ifname: \Device\NPF_{769E012B-FD17-4935-A5E3-8090C38E25D2} description: Atheros Wireless Network Adapter (Microsoft's Packet Scheduler) ifname: \Device\NPF_{732546E7-E26C-48E3-9871-7537B020A211} description: Intel 8255x-based Integrated Fast Ethernet (Microsoft's Packet Scheduler) Since the example configuration used Atheros WLAN card, the middle one is the correct interface in this case. The interface name for -i command line option is the full string following "ifname:" (the "\Device\NPF_" prefix can be removed). In other words, wpa_supplicant would be started with the following command: # wpa_supplicant.exe -i'{769E012B-FD17-4935-A5E3-8090C38E25D2}' -c wpa_supplicant.conf -d -d optional enables some more debugging (use -dd for even more, if needed). It can be left out if debugging information is not needed. With the alternative mechanism for selecting the interface, this command has identical results in this case: # wpa_supplicant.exe -iAtheros -c wpa_supplicant.conf -d Simple configuration example for WPA-PSK: #ap_scan=2 ctrl_interface= network={ ssid="test" key_mgmt=WPA-PSK proto=WPA pairwise=TKIP psk="secret passphrase" } (remove '#' from the comment out ap_scan line to enable mode in which wpa_supplicant tries to associate with the SSID without doing scanning; this allows APs with hidden SSIDs to be used) wpa_cli.exe and wpa_gui.exe can be used to interact with the wpa_supplicant.exe program in the same way as with Linux. Note that ctrl_interface is using UNIX domain sockets when built for cygwin, but the native build for Windows uses named pipes and the contents of the ctrl_interface configuration item is used to control access to the interface. Anyway, this variable has to be included in the configuration to enable the control interface. Example SDDL string formats: (local admins group has permission, but nobody else): ctrl_interface=SDDL=D:(A;;GA;;;BA) ("A" == "access allowed", "GA" == GENERIC_ALL == all permissions, and "BA" == "builtin administrators" == the local admins. The empty fields are for flags and object GUIDs, none of which should be required in this case.) (local admins and the local "power users" group have permissions, but nobody else): ctrl_interface=SDDL=D:(A;;GA;;;BA)(A;;GA;;;PU) (One ACCESS_ALLOWED ACE for GENERIC_ALL for builtin administrators, and one ACCESS_ALLOWED ACE for GENERIC_ALL for power users.) (close to wide open, but you have to be a valid user on the machine): ctrl_interface=SDDL=D:(A;;GA;;;AU) (One ACCESS_ALLOWED ACE for GENERIC_ALL for the "authenticated users" group.) This one would allow absolutely everyone (including anonymous users) -- this is *not* recommended, since named pipes can be attached to from anywhere on the network (i.e. there's no "this machine only" like there is with 127.0.0.1 sockets): ctrl_interface=SDDL=D:(A;;GA;;;BU)(A;;GA;;;AN) (BU == "builtin users", "AN" == "anonymous") See also [1] for the format of ACEs, and [2] for the possible strings that can be used for principal names. [1] http://msdn.microsoft.com/library/default.asp?url=/library/en-us/secauthz/security/ace_strings.asp [2] http://msdn.microsoft.com/library/default.asp?url=/library/en-us/secauthz/security/sid_strings.asp Starting wpa_supplicant as a Windows service (wpasvc.exe) --------------------------------------------------------- wpa_supplicant can be started as a Windows service by using wpasvc.exe program that is alternative build of wpa_supplicant.exe. Most of the core functionality of wpasvc.exe is identical to wpa_supplicant.exe, but it is using Windows registry for configuration information instead of a text file and command line parameters. In addition, it can be registered as a service that can be started automatically or manually like any other Windows service. The root of wpa_supplicant configuration in registry is HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant. This level includes global parameters and a 'interfaces' subkey with all the interface configuration (adapter to confname mapping). Each such mapping is a subkey that has 'adapter', 'config', and 'ctrl_interface' values. This program can be run either as a normal command line application, e.g., for debugging, with 'wpasvc.exe app' or as a Windows service. Service need to be registered with 'wpasvc.exe reg '. Alternatively, 'wpasvc.exe reg' can be used to register the service with the current location of wpasvc.exe. After this, wpasvc can be started like any other Windows service (e.g., 'net start wpasvc') or it can be configured to start automatically through the Services tool in administrative tasks. The service can be unregistered with 'wpasvc.exe unreg'. If the service is set to start during system bootup to make the network connection available before any user has logged in, there may be a long (half a minute or so) delay in starting up wpa_supplicant due to WinPcap needing a driver called "Network Monitor Driver" which is started by default on demand. To speed up wpa_supplicant start during system bootup, "Network Monitor Driver" can be configured to be started sooner by setting its startup type to System instead of the default Demand. To do this, open up Device Manager, select Show Hidden Devices, expand the "Non Plug-and-Play devices" branch, double click "Network Monitor Driver", go to the Driver tab, and change the Demand setting to System instead. Configuration data is in HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\configs key. Each configuration profile has its own key under this. In terms of text files, each profile would map to a separate text file with possibly multiple networks. Under each profile, there is a networks key that lists all networks as a subkey. Each network has set of values in the same way as network block in the configuration file. In addition, blobs subkey has possible blobs as values. HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\configs\test\networks\0000 ssid="example" key_mgmt=WPA-PSK See win_example.reg for an example on how to setup wpasvc.exe parameters in registry. It can also be imported to registry as a starting point for the configuration. License information for third party software used in this product: OpenSSL License --------------- /* ==================================================================== * Copyright (c) 1998-2004 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ Original SSLeay License ----------------------- /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ Qt Open Source Edition ---------------------- The Qt GUI Toolkit is Copyright (C) 1994-2007 Trolltech ASA. Qt Open Source Edition is licensed under GPL version 2. Source code for the library is available at http://w1.fi/wpa_supplicant/qt4/qt-win-opensource-src-4.3.3.zip