/* * WPA Supplicant - driver interface definition * Copyright (c) 2003-2009, Jouni Malinen * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Alternatively, this software may be distributed under the terms of BSD * license. * * See README and COPYING for more details. */ #ifndef DRIVER_H #define DRIVER_H #define WPA_SUPPLICANT_DRIVER_VERSION 4 #include "common/defs.h" #define HOSTAPD_CHAN_DISABLED 0x00000001 #define HOSTAPD_CHAN_PASSIVE_SCAN 0x00000002 #define HOSTAPD_CHAN_NO_IBSS 0x00000004 #define HOSTAPD_CHAN_RADAR 0x00000008 struct hostapd_channel_data { short chan; /* channel number (IEEE 802.11) */ short freq; /* frequency in MHz */ int flag; /* flag for hostapd use (HOSTAPD_CHAN_*) */ u8 max_tx_power; /* maximum transmit power in dBm */ }; #define HOSTAPD_RATE_ERP 0x00000001 #define HOSTAPD_RATE_BASIC 0x00000002 #define HOSTAPD_RATE_PREAMBLE2 0x00000004 #define HOSTAPD_RATE_SUPPORTED 0x00000010 #define HOSTAPD_RATE_OFDM 0x00000020 #define HOSTAPD_RATE_CCK 0x00000040 #define HOSTAPD_RATE_MANDATORY 0x00000100 struct hostapd_rate_data { int rate; /* rate in 100 kbps */ int flags; /* HOSTAPD_RATE_ flags */ }; struct hostapd_hw_modes { hostapd_hw_mode mode; int num_channels; struct hostapd_channel_data *channels; int num_rates; struct hostapd_rate_data *rates; u16 ht_capab; u8 mcs_set[16]; u8 a_mpdu_params; }; #define AUTH_ALG_OPEN_SYSTEM 0x01 #define AUTH_ALG_SHARED_KEY 0x02 #define AUTH_ALG_LEAP 0x04 #define AUTH_ALG_FT 0x08 #define IEEE80211_MODE_INFRA 0 #define IEEE80211_MODE_IBSS 1 #define IEEE80211_MODE_AP 2 #define IEEE80211_CAP_ESS 0x0001 #define IEEE80211_CAP_IBSS 0x0002 #define IEEE80211_CAP_PRIVACY 0x0010 #define WPA_SCAN_QUAL_INVALID BIT(0) #define WPA_SCAN_NOISE_INVALID BIT(1) #define WPA_SCAN_LEVEL_INVALID BIT(2) #define WPA_SCAN_LEVEL_DBM BIT(3) #define WPA_SCAN_AUTHENTICATED BIT(4) #define WPA_SCAN_ASSOCIATED BIT(5) /** * struct wpa_scan_res - Scan result for an BSS/IBSS * @flags: information flags about the BSS/IBSS (WPA_SCAN_*) * @bssid: BSSID * @freq: frequency of the channel in MHz (e.g., 2412 = channel 1) * @beacon_int: beacon interval in TUs (host byte order) * @caps: capability information field in host byte order * @qual: signal quality * @noise: noise level * @level: signal level * @tsf: Timestamp * @age: Age of the information in milliseconds (i.e., how many milliseconds * ago the last Beacon or Probe Response frame was received) * @ie_len: length of the following IE field in octets * * This structure is used as a generic format for scan results from the * driver. Each driver interface implementation is responsible for converting * the driver or OS specific scan results into this format. * * If the driver does not support reporting all IEs, the IE data structure is * constructed of the IEs that are available. This field will also need to * include SSID in IE format. All drivers are encouraged to be extended to * report all IEs to make it easier to support future additions. */ struct wpa_scan_res { unsigned int flags; u8 bssid[ETH_ALEN]; int freq; u16 beacon_int; u16 caps; int qual; int noise; int level; u64 tsf; unsigned int age; size_t ie_len; /* followed by ie_len octets of IEs */ }; /** * struct wpa_scan_results - Scan results * @res: Array of pointers to allocated variable length scan result entries * @num: Number of entries in the scan result array */ struct wpa_scan_results { struct wpa_scan_res **res; size_t num; }; /** * struct wpa_interface_info - Network interface information * @next: Pointer to the next interface or NULL if this is the last one * @ifname: Interface name that can be used with init() or init2() * @desc: Human readable adapter description (e.g., vendor/model) or NULL if * not available * @drv_bame: struct wpa_driver_ops::name (note: unlike other strings, this one * is not an allocated copy, i.e., get_interfaces() caller will not free * this) */ struct wpa_interface_info { struct wpa_interface_info *next; char *ifname; char *desc; const char *drv_name; }; #define WPAS_MAX_SCAN_SSIDS 4 /** * struct wpa_driver_scan_params - Scan parameters * Data for struct wpa_driver_ops::scan2(). */ struct wpa_driver_scan_params { /** * ssids - SSIDs to scan for */ struct wpa_driver_scan_ssid { /** * ssid - specific SSID to scan for (ProbeReq) * %NULL or zero-length SSID is used to indicate active scan * with wildcard SSID. */ const u8 *ssid; /** * ssid_len: Length of the SSID in octets */ size_t ssid_len; } ssids[WPAS_MAX_SCAN_SSIDS]; /** * num_ssids - Number of entries in ssids array * Zero indicates a request for a passive scan. */ size_t num_ssids; /** * extra_ies - Extra IE(s) to add into Probe Request or %NULL */ const u8 *extra_ies; /** * extra_ies_len - Length of extra_ies in octets */ size_t extra_ies_len; /** * freqs - Array of frequencies to scan or %NULL for all frequencies * * The frequency is set in MHz. The array is zero-terminated. */ int *freqs; }; /** * struct wpa_driver_auth_params - Authentication parameters * Data for struct wpa_driver_ops::authenticate(). */ struct wpa_driver_auth_params { int freq; const u8 *bssid; const u8 *ssid; size_t ssid_len; int auth_alg; const u8 *ie; size_t ie_len; const u8 *wep_key[4]; size_t wep_key_len[4]; int wep_tx_keyidx; }; /** * struct wpa_driver_associate_params - Association parameters * Data for struct wpa_driver_ops::associate(). */ struct wpa_driver_associate_params { /** * bssid - BSSID of the selected AP * This can be %NULL, if ap_scan=2 mode is used and the driver is * responsible for selecting with which BSS to associate. */ const u8 *bssid; /** * ssid - The selected SSID */ const u8 *ssid; size_t ssid_len; /** * freq - Frequency of the channel the selected AP is using * Frequency that the selected AP is using (in MHz as * reported in the scan results) */ int freq; /** * wpa_ie - WPA information element for (Re)Association Request * WPA information element to be included in (Re)Association * Request (including information element id and length). Use * of this WPA IE is optional. If the driver generates the WPA * IE, it can use pairwise_suite, group_suite, and * key_mgmt_suite to select proper algorithms. In this case, * the driver has to notify wpa_supplicant about the used WPA * IE by generating an event that the interface code will * convert into EVENT_ASSOCINFO data (see below). * * When using WPA2/IEEE 802.11i, wpa_ie is used for RSN IE * instead. The driver can determine which version is used by * looking at the first byte of the IE (0xdd for WPA, 0x30 for * WPA2/RSN). * * When using WPS, wpa_ie is used for WPS IE instead of WPA/RSN IE. */ const u8 *wpa_ie; /** * wpa_ie_len - length of the wpa_ie */ size_t wpa_ie_len; /* The selected pairwise/group cipher and key management * suites. These are usually ignored if @wpa_ie is used. */ wpa_cipher pairwise_suite; wpa_cipher group_suite; wpa_key_mgmt key_mgmt_suite; /** * auth_alg - Allowed authentication algorithms * Bit field of AUTH_ALG_* */ int auth_alg; /** * mode - Operation mode (infra/ibss) IEEE80211_MODE_* */ int mode; /** * wep_key - WEP keys for static WEP configuration */ const u8 *wep_key[4]; /** * wep_key_len - WEP key length for static WEP configuration */ size_t wep_key_len[4]; /** * wep_tx_keyidx - WEP TX key index for static WEP configuration */ int wep_tx_keyidx; /** * mgmt_frame_protection - IEEE 802.11w management frame protection */ enum { NO_MGMT_FRAME_PROTECTION, MGMT_FRAME_PROTECTION_OPTIONAL, MGMT_FRAME_PROTECTION_REQUIRED } mgmt_frame_protection; /** * ft_ies - IEEE 802.11r / FT information elements * If the supplicant is using IEEE 802.11r (FT) and has the needed keys * for fast transition, this parameter is set to include the IEs that * are to be sent in the next FT Authentication Request message. * update_ft_ies() handler is called to update the IEs for further * FT messages in the sequence. * * The driver should use these IEs only if the target AP is advertising * the same mobility domain as the one included in the MDIE here. * * In ap_scan=2 mode, the driver can use these IEs when moving to a new * AP after the initial association. These IEs can only be used if the * target AP is advertising support for FT and is using the same MDIE * and SSID as the current AP. * * The driver is responsible for reporting the FT IEs received from the * AP's response using wpa_supplicant_event() with EVENT_FT_RESPONSE * type. update_ft_ies() handler will then be called with the FT IEs to * include in the next frame in the authentication sequence. */ const u8 *ft_ies; /** * ft_ies_len - Length of ft_ies in bytes */ size_t ft_ies_len; /** * ft_md - FT Mobility domain (6 octets) (also included inside ft_ies) * * This value is provided to allow the driver interface easier access * to the current mobility domain. This value is set to %NULL if no * mobility domain is currently active. */ const u8 *ft_md; /** * passphrase - RSN passphrase for PSK * * This value is made available only for WPA/WPA2-Personal (PSK) and * only for drivers that set WPA_DRIVER_FLAGS_4WAY_HANDSHAKE. This is * the 8..63 character ASCII passphrase, if available. Please note that * this can be %NULL if passphrase was not used to generate the PSK. In * that case, the psk field must be used to fetch the PSK. */ const char *passphrase; /** * psk - RSN PSK (alternative for passphrase for PSK) * * This value is made available only for WPA/WPA2-Personal (PSK) and * only for drivers that set WPA_DRIVER_FLAGS_4WAY_HANDSHAKE. This is * the 32-octet (256-bit) PSK, if available. The driver wrapper should * be prepared to handle %NULL value as an error. */ const u8 *psk; /** * drop_unencrypted - Enable/disable unencrypted frame filtering * * Configure the driver to drop all non-EAPOL frames (both receive and * transmit paths). Unencrypted EAPOL frames (ethertype 0x888e) must * still be allowed for key negotiation. */ int drop_unencrypted; /** * prev_bssid - Previously used BSSID in this ESS * * When not %NULL, this is a request to use reassociation instead of * association. */ const u8 *prev_bssid; }; /** * struct wpa_driver_capa - Driver capability information */ struct wpa_driver_capa { #define WPA_DRIVER_CAPA_KEY_MGMT_WPA 0x00000001 #define WPA_DRIVER_CAPA_KEY_MGMT_WPA2 0x00000002 #define WPA_DRIVER_CAPA_KEY_MGMT_WPA_PSK 0x00000004 #define WPA_DRIVER_CAPA_KEY_MGMT_WPA2_PSK 0x00000008 #define WPA_DRIVER_CAPA_KEY_MGMT_WPA_NONE 0x00000010 #define WPA_DRIVER_CAPA_KEY_MGMT_FT 0x00000020 #define WPA_DRIVER_CAPA_KEY_MGMT_FT_PSK 0x00000040 unsigned int key_mgmt; #define WPA_DRIVER_CAPA_ENC_WEP40 0x00000001 #define WPA_DRIVER_CAPA_ENC_WEP104 0x00000002 #define WPA_DRIVER_CAPA_ENC_TKIP 0x00000004 #define WPA_DRIVER_CAPA_ENC_CCMP 0x00000008 unsigned int enc; #define WPA_DRIVER_AUTH_OPEN 0x00000001 #define WPA_DRIVER_AUTH_SHARED 0x00000002 #define WPA_DRIVER_AUTH_LEAP 0x00000004 unsigned int auth; /* Driver generated WPA/RSN IE */ #define WPA_DRIVER_FLAGS_DRIVER_IE 0x00000001 /* Driver needs static WEP key setup after association command */ #define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC 0x00000002 #define WPA_DRIVER_FLAGS_USER_SPACE_MLME 0x00000004 /* Driver takes care of RSN 4-way handshake internally; PMK is configured with * struct wpa_driver_ops::set_key using alg = WPA_ALG_PMK */ #define WPA_DRIVER_FLAGS_4WAY_HANDSHAKE 0x00000008 #define WPA_DRIVER_FLAGS_WIRED 0x00000010 /* Driver provides separate commands for authentication and association (SME in * wpa_supplicant). */ #define WPA_DRIVER_FLAGS_SME 0x00000020 /* Driver supports AP mode */ #define WPA_DRIVER_FLAGS_AP 0x00000040 /* Driver needs static WEP key setup after association has been completed */ #define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE 0x00000080 unsigned int flags; int max_scan_ssids; }; struct ieee80211_rx_status { int channel; int ssi; }; struct hostapd_data; struct hostap_sta_driver_data { unsigned long rx_packets, tx_packets, rx_bytes, tx_bytes; unsigned long current_tx_rate; unsigned long inactive_msec; unsigned long flags; unsigned long num_ps_buf_frames; unsigned long tx_retry_failed; unsigned long tx_retry_count; int last_rssi; int last_ack_rssi; }; struct hostapd_sta_add_params { const u8 *addr; u16 aid; u16 capability; const u8 *supp_rates; size_t supp_rates_len; int flags; u16 listen_interval; const struct ieee80211_ht_capabilities *ht_capabilities; }; struct hostapd_freq_params { int mode; int freq; int channel; int ht_enabled; int sec_channel_offset; /* 0 = HT40 disabled, -1 = HT40 enabled, * secondary channel below primary, 1 = HT40 * enabled, secondary channel above primary */ }; enum wpa_driver_if_type { /** * WPA_IF_STATION - Station mode interface */ WPA_IF_STATION, /** * WPA_IF_AP_VLAN - AP mode VLAN interface * * This interface shares its address and Beacon frame with the main * BSS. */ WPA_IF_AP_VLAN, /** * WPA_IF_AP_BSS - AP mode BSS interface * * This interface has its own address and Beacon frame. */ WPA_IF_AP_BSS, }; struct wpa_init_params { const u8 *bssid; const char *ifname; const u8 *ssid; size_t ssid_len; const char *test_socket; int use_pae_group_addr; char **bridge; size_t num_bridge; u8 *own_addr; /* buffer for writing own MAC address */ }; /** * struct wpa_driver_ops - Driver interface API definition * * This structure defines the API that each driver interface needs to implement * for core wpa_supplicant code. All driver specific functionality is captured * in this wrapper. */ struct wpa_driver_ops { /** Name of the driver interface */ const char *name; /** One line description of the driver interface */ const char *desc; /** * get_bssid - Get the current BSSID * @priv: private driver interface data * @bssid: buffer for BSSID (ETH_ALEN = 6 bytes) * * Returns: 0 on success, -1 on failure * * Query kernel driver for the current BSSID and copy it to bssid. * Setting bssid to 00:00:00:00:00:00 is recommended if the STA is not * associated. */ int (*get_bssid)(void *priv, u8 *bssid); /** * get_ssid - Get the current SSID * @priv: private driver interface data * @ssid: buffer for SSID (at least 32 bytes) * * Returns: Length of the SSID on success, -1 on failure * * Query kernel driver for the current SSID and copy it to ssid. * Returning zero is recommended if the STA is not associated. * * Note: SSID is an array of octets, i.e., it is not nul terminated and * can, at least in theory, contain control characters (including nul) * and as such, should be processed as binary data, not a printable * string. */ int (*get_ssid)(void *priv, u8 *ssid); /** * set_key - Configure encryption key * @ifname: Interface name (for multi-SSID/VLAN support) * @priv: private driver interface data * @alg: encryption algorithm (%WPA_ALG_NONE, %WPA_ALG_WEP, * %WPA_ALG_TKIP, %WPA_ALG_CCMP, %WPA_ALG_IGTK, %WPA_ALG_PMK); * %WPA_ALG_NONE clears the key. * @addr: address of the peer STA or ff:ff:ff:ff:ff:ff for * broadcast/default keys * @key_idx: key index (0..3), usually 0 for unicast keys; 0..4095 for * IGTK * @set_tx: configure this key as the default Tx key (only used when * driver does not support separate unicast/individual key * @seq: sequence number/packet number, seq_len octets, the next * packet number to be used for in replay protection; configured * for Rx keys (in most cases, this is only used with broadcast * keys and set to zero for unicast keys) * @seq_len: length of the seq, depends on the algorithm: * TKIP: 6 octets, CCMP: 6 octets, IGTK: 6 octets * @key: key buffer; TKIP: 16-byte temporal key, 8-byte Tx Mic key, * 8-byte Rx Mic Key * @key_len: length of the key buffer in octets (WEP: 5 or 13, * TKIP: 32, CCMP: 16, IGTK: 16) * * Returns: 0 on success, -1 on failure * * Configure the given key for the kernel driver. If the driver * supports separate individual keys (4 default keys + 1 individual), * addr can be used to determine whether the key is default or * individual. If only 4 keys are supported, the default key with key * index 0 is used as the individual key. STA must be configured to use * it as the default Tx key (set_tx is set) and accept Rx for all the * key indexes. In most cases, WPA uses only key indexes 1 and 2 for * broadcast keys, so key index 0 is available for this kind of * configuration. * * Please note that TKIP keys include separate TX and RX MIC keys and * some drivers may expect them in different order than wpa_supplicant * is using. If the TX/RX keys are swapped, all TKIP encrypted packets * will tricker Michael MIC errors. This can be fixed by changing the * order of MIC keys by swapping te bytes 16..23 and 24..31 of the key * in driver_*.c set_key() implementation, see driver_ndis.c for an * example on how this can be done. */ int (*set_key)(const char *ifname, void *priv, wpa_alg alg, const u8 *addr, int key_idx, int set_tx, const u8 *seq, size_t seq_len, const u8 *key, size_t key_len); /** * init - Initialize driver interface * @ctx: context to be used when calling wpa_supplicant functions, * e.g., wpa_supplicant_event() * @ifname: interface name, e.g., wlan0 * * Returns: Pointer to private data, %NULL on failure * * Initialize driver interface, including event processing for kernel * driver events (e.g., associated, scan results, Michael MIC failure). * This function can allocate a private configuration data area for * @ctx, file descriptor, interface name, etc. information that may be * needed in future driver operations. If this is not used, non-NULL * value will need to be returned because %NULL is used to indicate * failure. The returned value will be used as 'void *priv' data for * all other driver_ops functions. * * The main event loop (eloop.c) of wpa_supplicant can be used to * register callback for read sockets (eloop_register_read_sock()). * * See below for more information about events and * wpa_supplicant_event() function. */ void * (*init)(void *ctx, const char *ifname); /** * deinit - Deinitialize driver interface * @priv: private driver interface data from init() * * Shut down driver interface and processing of driver events. Free * private data buffer if one was allocated in init() handler. */ void (*deinit)(void *priv); /** * set_param - Set driver configuration parameters * @priv: private driver interface data from init() * @param: driver specific configuration parameters * * Returns: 0 on success, -1 on failure * * Optional handler for notifying driver interface about configuration * parameters (driver_param). */ int (*set_param)(void *priv, const char *param); /** * set_countermeasures - Enable/disable TKIP countermeasures * @priv: private driver interface data * @enabled: 1 = countermeasures enabled, 0 = disabled * * Returns: 0 on success, -1 on failure * * Configure TKIP countermeasures. When these are enabled, the driver * should drop all received and queued frames that are using TKIP. */ int (*set_countermeasures)(void *priv, int enabled); /** * deauthenticate - Request driver to deauthenticate * @priv: private driver interface data * @addr: peer address (BSSID of the AP) * @reason_code: 16-bit reason code to be sent in the deauthentication * frame * * Returns: 0 on success, -1 on failure */ int (*deauthenticate)(void *priv, const u8 *addr, int reason_code); /** * disassociate - Request driver to disassociate * @priv: private driver interface data * @addr: peer address (BSSID of the AP) * @reason_code: 16-bit reason code to be sent in the disassociation * frame * * Returns: 0 on success, -1 on failure */ int (*disassociate)(void *priv, const u8 *addr, int reason_code); /** * associate - Request driver to associate * @priv: private driver interface data * @params: association parameters * * Returns: 0 on success, -1 on failure */ int (*associate)(void *priv, struct wpa_driver_associate_params *params); /** * add_pmkid - Add PMKSA cache entry to the driver * @priv: private driver interface data * @bssid: BSSID for the PMKSA cache entry * @pmkid: PMKID for the PMKSA cache entry * * Returns: 0 on success, -1 on failure * * This function is called when a new PMK is received, as a result of * either normal authentication or RSN pre-authentication. * * If the driver generates RSN IE, i.e., it does not use wpa_ie in * associate(), add_pmkid() can be used to add new PMKSA cache entries * in the driver. If the driver uses wpa_ie from wpa_supplicant, this * driver_ops function does not need to be implemented. Likewise, if * the driver does not support WPA, this function is not needed. */ int (*add_pmkid)(void *priv, const u8 *bssid, const u8 *pmkid); /** * remove_pmkid - Remove PMKSA cache entry to the driver * @priv: private driver interface data * @bssid: BSSID for the PMKSA cache entry * @pmkid: PMKID for the PMKSA cache entry * * Returns: 0 on success, -1 on failure * * This function is called when the supplicant drops a PMKSA cache * entry for any reason. * * If the driver generates RSN IE, i.e., it does not use wpa_ie in * associate(), remove_pmkid() can be used to synchronize PMKSA caches * between the driver and wpa_supplicant. If the driver uses wpa_ie * from wpa_supplicant, this driver_ops function does not need to be * implemented. Likewise, if the driver does not support WPA, this * function is not needed. */ int (*remove_pmkid)(void *priv, const u8 *bssid, const u8 *pmkid); /** * flush_pmkid - Flush PMKSA cache * @priv: private driver interface data * * Returns: 0 on success, -1 on failure * * This function is called when the supplicant drops all PMKSA cache * entries for any reason. * * If the driver generates RSN IE, i.e., it does not use wpa_ie in * associate(), remove_pmkid() can be used to synchronize PMKSA caches * between the driver and wpa_supplicant. If the driver uses wpa_ie * from wpa_supplicant, this driver_ops function does not need to be * implemented. Likewise, if the driver does not support WPA, this * function is not needed. */ int (*flush_pmkid)(void *priv); /** * get_capa - Get driver capabilities * @priv: private driver interface data * * Returns: 0 on success, -1 on failure * * Get driver/firmware/hardware capabilities. */ int (*get_capa)(void *priv, struct wpa_driver_capa *capa); /** * poll - Poll driver for association information * @priv: private driver interface data * * This is an option callback that can be used when the driver does not * provide event mechanism for association events. This is called when * receiving WPA EAPOL-Key messages that require association * information. The driver interface is supposed to generate associnfo * event before returning from this callback function. In addition, the * driver interface should generate an association event after having * sent out associnfo. */ void (*poll)(void *priv); /** * get_ifname - Get interface name * @priv: private driver interface data * * Returns: Pointer to the interface name. This can differ from the * interface name used in init() call. Init() is called first. * * This optional function can be used to allow the driver interface to * replace the interface name with something else, e.g., based on an * interface mapping from a more descriptive name. */ const char * (*get_ifname)(void *priv); /** * get_mac_addr - Get own MAC address * @priv: private driver interface data * * Returns: Pointer to own MAC address or %NULL on failure * * This optional function can be used to get the own MAC address of the * device from the driver interface code. This is only needed if the * l2_packet implementation for the OS does not provide easy access to * a MAC address. */ const u8 * (*get_mac_addr)(void *priv); /** * send_eapol - Optional function for sending EAPOL packets * @priv: private driver interface data * @dest: Destination MAC address * @proto: Ethertype * @data: EAPOL packet starting with IEEE 802.1X header * @data_len: Size of the EAPOL packet * * Returns: 0 on success, -1 on failure * * This optional function can be used to override l2_packet operations * with driver specific functionality. If this function pointer is set, * l2_packet module is not used at all and the driver interface code is * responsible for receiving and sending all EAPOL packets. The * received EAPOL packets are sent to core code by calling * wpa_supplicant_rx_eapol(). The driver interface is required to * implement get_mac_addr() handler if send_eapol() is used. */ int (*send_eapol)(void *priv, const u8 *dest, u16 proto, const u8 *data, size_t data_len); /** * set_operstate - Sets device operating state to DORMANT or UP * @priv: private driver interface data * @state: 0 = dormant, 1 = up * Returns: 0 on success, -1 on failure * * This is an optional function that can be used on operating systems * that support a concept of controlling network device state from user * space applications. This function, if set, gets called with * state = 1 when authentication has been completed and with state = 0 * when connection is lost. */ int (*set_operstate)(void *priv, int state); /** * mlme_setprotection - MLME-SETPROTECTION.request primitive * @priv: Private driver interface data * @addr: Address of the station for which to set protection (may be * %NULL for group keys) * @protect_type: MLME_SETPROTECTION_PROTECT_TYPE_* * @key_type: MLME_SETPROTECTION_KEY_TYPE_* * Returns: 0 on success, -1 on failure * * This is an optional function that can be used to set the driver to * require protection for Tx and/or Rx frames. This uses the layer * interface defined in IEEE 802.11i-2004 clause 10.3.22.1 * (MLME-SETPROTECTION.request). Many drivers do not use explicit * set protection operation; instead, they set protection implicitly * based on configured keys. */ int (*mlme_setprotection)(void *priv, const u8 *addr, int protect_type, int key_type); /** * get_hw_feature_data - Get hardware support data (channels and rates) * @priv: Private driver interface data * @num_modes: Variable for returning the number of returned modes * flags: Variable for returning hardware feature flags * Returns: Pointer to allocated hardware data on success or %NULL on * failure. Caller is responsible for freeing this. * * This function is only needed for drivers that export MLME * (management frame processing) to wpa_supplicant. */ struct hostapd_hw_modes * (*get_hw_feature_data)(void *priv, u16 *num_modes, u16 *flags); /** * set_channel - Set channel * @priv: Private driver interface data * @phymode: HOSTAPD_MODE_IEEE80211B, .. * @chan: IEEE 802.11 channel number * @freq: Frequency of the channel in MHz * Returns: 0 on success, -1 on failure * * This function is only needed for drivers that export MLME * (management frame processing) to wpa_supplicant. */ int (*set_channel)(void *priv, hostapd_hw_mode phymode, int chan, int freq); /** * set_ssid - Set SSID * @priv: Private driver interface data * @ssid: SSID * @ssid_len: SSID length * Returns: 0 on success, -1 on failure * * This function is only needed for drivers that export MLME * (management frame processing) to wpa_supplicant. */ int (*set_ssid)(void *priv, const u8 *ssid, size_t ssid_len); /** * set_bssid - Set BSSID * @priv: Private driver interface data * @bssid: BSSID * Returns: 0 on success, -1 on failure * * This function is only needed for drivers that export MLME * (management frame processing) to wpa_supplicant. */ int (*set_bssid)(void *priv, const u8 *bssid); /** * send_mlme - Send management frame from MLME * @priv: Private driver interface data * @data: IEEE 802.11 management frame with IEEE 802.11 header * @data_len: Size of the management frame * Returns: 0 on success, -1 on failure * * This function is only needed for drivers that export MLME * (management frame processing) to wpa_supplicant. */ int (*send_mlme)(void *priv, const u8 *data, size_t data_len); /** * mlme_add_sta - Add a STA entry into the driver/netstack * @priv: Private driver interface data * @addr: MAC address of the STA (e.g., BSSID of the AP) * @supp_rates: Supported rate set (from (Re)AssocResp); in IEEE 802.11 * format (one octet per rate, 1 = 0.5 Mbps) * @supp_rates_len: Number of entries in supp_rates * Returns: 0 on success, -1 on failure * * This function is only needed for drivers that export MLME * (management frame processing) to wpa_supplicant. When the MLME code * completes association with an AP, this function is called to * configure the driver/netstack with a STA entry for data frame * processing (TX rate control, encryption/decryption). */ int (*mlme_add_sta)(void *priv, const u8 *addr, const u8 *supp_rates, size_t supp_rates_len); /** * mlme_remove_sta - Remove a STA entry from the driver/netstack * @priv: Private driver interface data * @addr: MAC address of the STA (e.g., BSSID of the AP) * Returns: 0 on success, -1 on failure * * This function is only needed for drivers that export MLME * (management frame processing) to wpa_supplicant. */ int (*mlme_remove_sta)(void *priv, const u8 *addr); /** * update_ft_ies - Update FT (IEEE 802.11r) IEs * @priv: Private driver interface data * @md: Mobility domain (2 octets) (also included inside ies) * @ies: FT IEs (MDIE, FTIE, ...) or %NULL to remove IEs * @ies_len: Length of FT IEs in bytes * Returns: 0 on success, -1 on failure * * The supplicant uses this callback to let the driver know that keying * material for FT is available and that the driver can use the * provided IEs in the next message in FT authentication sequence. * * This function is only needed for driver that support IEEE 802.11r * (Fast BSS Transition). */ int (*update_ft_ies)(void *priv, const u8 *md, const u8 *ies, size_t ies_len); /** * send_ft_action - Send FT Action frame (IEEE 802.11r) * @priv: Private driver interface data * @action: Action field value * @target_ap: Target AP address * @ies: FT IEs (MDIE, FTIE, ...) (FT Request action frame body) * @ies_len: Length of FT IEs in bytes * Returns: 0 on success, -1 on failure * * The supplicant uses this callback to request the driver to transmit * an FT Action frame (action category 6) for over-the-DS fast BSS * transition. */ int (*send_ft_action)(void *priv, u8 action, const u8 *target_ap, const u8 *ies, size_t ies_len); /** * get_scan_results2 - Fetch the latest scan results * @priv: private driver interface data * * Returns: Allocated buffer of scan results (caller is responsible for * freeing the data structure) on success, NULL on failure */ struct wpa_scan_results * (*get_scan_results2)(void *priv); /** * set_country - Set country * @priv: Private driver interface data * @alpha2: country to which to switch to * Returns: 0 on success, -1 on failure * * This function is for drivers which support some form * of setting a regulatory domain. */ int (*set_country)(void *priv, const char *alpha2); /** * global_init - Global driver initialization * Returns: Pointer to private data (global), %NULL on failure * * This optional function is called to initialize the driver wrapper * for global data, i.e., data that applies to all interfaces. If this * function is implemented, global_deinit() will also need to be * implemented to free the private data. The driver will also likely * use init2() function instead of init() to get the pointer to global * data available to per-interface initializer. */ void * (*global_init)(void); /** * global_deinit - Global driver deinitialization * @priv: private driver global data from global_init() * * Terminate any global driver related functionality and free the * global data structure. */ void (*global_deinit)(void *priv); /** * init2 - Initialize driver interface (with global data) * @ctx: context to be used when calling wpa_supplicant functions, * e.g., wpa_supplicant_event() * @ifname: interface name, e.g., wlan0 * @global_priv: private driver global data from global_init() * Returns: Pointer to private data, %NULL on failure * * This function can be used instead of init() if the driver wrapper * uses global data. */ void * (*init2)(void *ctx, const char *ifname, void *global_priv); /** * get_interfaces - Get information about available interfaces * @global_priv: private driver global data from global_init() * Returns: Allocated buffer of interface information (caller is * responsible for freeing the data structure) on success, NULL on * failure */ struct wpa_interface_info * (*get_interfaces)(void *global_priv); /** * scan2 - Request the driver to initiate scan * @priv: private driver interface data * @params: Scan parameters * * Returns: 0 on success, -1 on failure * * Once the scan results are ready, the driver should report scan * results event for wpa_supplicant which will eventually request the * results with wpa_driver_get_scan_results2(). */ int (*scan2)(void *priv, struct wpa_driver_scan_params *params); /** * authenticate - Request driver to authenticate * @priv: private driver interface data * @params: authentication parameters * Returns: 0 on success, -1 on failure * * This is an optional function that can be used with drivers that * support separate authentication and association steps, i.e., when * wpa_supplicant can act as the SME. If not implemented, associate() * function is expected to take care of IEEE 802.11 authentication, * too. */ int (*authenticate)(void *priv, struct wpa_driver_auth_params *params); int (*set_beacon)(const char *ifname, void *priv, const u8 *head, size_t head_len, const u8 *tail, size_t tail_len, int dtim_period, int beacon_int); void * (*hapd_init)(struct hostapd_data *hapd, struct wpa_init_params *params); void (*hapd_deinit)(void *priv); /** * set_8021x - enable/disable IEEE 802.1X support * @ifname: Interface name (for multi-SSID/VLAN support) * @priv: driver private data * @enabled: 1 = enable, 0 = disable * * Returns: 0 on success, -1 on failure * * Configure the kernel driver to enable/disable 802.1X support. * This may be an empty function if 802.1X support is always enabled. */ int (*set_ieee8021x)(const char *ifname, void *priv, int enabled); /** * set_privacy - enable/disable privacy * @priv: driver private data * @enabled: 1 = privacy enabled, 0 = disabled * * Return: 0 on success, -1 on failure * * Configure privacy. */ int (*set_privacy)(const char *ifname, void *priv, int enabled); int (*get_seqnum)(const char *ifname, void *priv, const u8 *addr, int idx, u8 *seq); int (*get_seqnum_igtk)(const char *ifname, void *priv, const u8 *addr, int idx, u8 *seq); int (*flush)(void *priv); int (*set_generic_elem)(const char *ifname, void *priv, const u8 *elem, size_t elem_len); int (*read_sta_data)(void *priv, struct hostap_sta_driver_data *data, const u8 *addr); int (*hapd_send_eapol)(void *priv, const u8 *addr, const u8 *data, size_t data_len, int encrypt, const u8 *own_addr); int (*sta_deauth)(void *priv, const u8 *own_addr, const u8 *addr, int reason); int (*sta_disassoc)(void *priv, const u8 *own_addr, const u8 *addr, int reason); int (*sta_remove)(void *priv, const u8 *addr); int (*hapd_get_ssid)(const char *ifname, void *priv, u8 *buf, int len); int (*hapd_set_ssid)(const char *ifname, void *priv, const u8 *buf, int len); int (*hapd_set_countermeasures)(void *priv, int enabled); int (*sta_add)(const char *ifname, void *priv, struct hostapd_sta_add_params *params); int (*get_inact_sec)(void *priv, const u8 *addr); int (*sta_clear_stats)(void *priv, const u8 *addr); int (*set_freq)(void *priv, struct hostapd_freq_params *freq); int (*set_rts)(void *priv, int rts); int (*set_frag)(void *priv, int frag); int (*sta_set_flags)(void *priv, const u8 *addr, int total_flags, int flags_or, int flags_and); int (*set_rate_sets)(void *priv, int *supp_rates, int *basic_rates, int mode); /* Configure internal bridge: * 0 = disabled, i.e., client separation is enabled (no bridging of * packets between associated STAs * 1 = enabled, i.e., bridge packets between associated STAs (default) */ int (*set_internal_bridge)(void *priv, int value); int (*set_cts_protect)(void *priv, int value); int (*set_preamble)(void *priv, int value); int (*set_short_slot_time)(void *priv, int value); int (*set_tx_queue_params)(void *priv, int queue, int aifs, int cw_min, int cw_max, int burst_time); int (*valid_bss_mask)(void *priv, const u8 *addr, const u8 *mask); /** * if_add - Add a virtual interface * @priv: Private driver interface data * @iface: Parent interface name * @type: Interface type * @ifname: Interface name for the new virtual interface * @addr: Local address to use for the interface or %NULL to use the * parent interface address * Returns: 0 on success, -1 on failure */ int (*if_add)(const char *iface, void *priv, enum wpa_driver_if_type type, const char *ifname, const u8 *addr); /** * if_remove - Remove a virtual interface * @priv: Private driver interface data * @type: Interface type * @ifname: Interface name of the virtual interface to be removed * Returns: 0 on success, -1 on failure */ int (*if_remove)(void *priv, enum wpa_driver_if_type type, const char *ifname); int (*set_sta_vlan)(void *priv, const u8 *addr, const char *ifname, int vlan_id); /** * commit - Optional commit changes handler * @priv: driver private data * Returns: 0 on success, -1 on failure * * This optional handler function can be registered if the driver * interface implementation needs to commit changes (e.g., by setting * network interface up) at the end of initial configuration. If set, * this handler will be called after initial setup has been completed. */ int (*commit)(void *priv); int (*send_ether)(void *priv, const u8 *dst, const u8 *src, u16 proto, const u8 *data, size_t data_len); int (*set_radius_acl_auth)(void *priv, const u8 *mac, int accepted, u32 session_timeout); int (*set_radius_acl_expire)(void *priv, const u8 *mac); int (*set_ht_params)(const char *ifname, void *priv, const u8 *ht_capab, size_t ht_capab_len, const u8 *ht_oper, size_t ht_oper_len); int (*set_wps_beacon_ie)(const char *ifname, void *priv, const u8 *ie, size_t len); int (*set_wps_probe_resp_ie)(const char *ifname, void *priv, const u8 *ie, size_t len); /** * set_supp_port - Set IEEE 802.1X Supplicant Port status * @priv: Private driver interface data * @authorized: Whether the port is authorized * Returns: 0 on success, -1 on failure */ int (*set_supp_port)(void *priv, int authorized); }; /** * enum wpa_event_type - Event type for wpa_supplicant_event() calls */ typedef enum wpa_event_type { /** * EVENT_ASSOC - Association completed * * This event needs to be delivered when the driver completes IEEE * 802.11 association or reassociation successfully. * wpa_driver_ops::get_bssid() is expected to provide the current BSSID * after this event has been generated. In addition, optional * EVENT_ASSOCINFO may be generated just before EVENT_ASSOC to provide * more information about the association. If the driver interface gets * both of these events at the same time, it can also include the * assoc_info data in EVENT_ASSOC call. */ EVENT_ASSOC, /** * EVENT_DISASSOC - Association lost * * This event should be called when association is lost either due to * receiving deauthenticate or disassociate frame from the AP or when * sending either of these frames to the current AP. If the driver * supports separate deauthentication event, EVENT_DISASSOC should only * be used for disassociation and EVENT_DEAUTH for deauthentication. */ EVENT_DISASSOC, /** * EVENT_MICHAEL_MIC_FAILURE - Michael MIC (TKIP) detected * * This event must be delivered when a Michael MIC error is detected by * the local driver. Additional data for event processing is * provided with union wpa_event_data::michael_mic_failure. This * information is used to request new encyption key and to initiate * TKIP countermeasures if needed. */ EVENT_MICHAEL_MIC_FAILURE, /** * EVENT_SCAN_RESULTS - Scan results available * * This event must be called whenever scan results are available to be * fetched with struct wpa_driver_ops::get_scan_results(). This event * is expected to be used some time after struct wpa_driver_ops::scan() * is called. If the driver provides an unsolicited event when the scan * has been completed, this event can be used to trigger * EVENT_SCAN_RESULTS call. If such event is not available from the * driver, the driver wrapper code is expected to use a registered * timeout to generate EVENT_SCAN_RESULTS call after the time that the * scan is expected to be completed. */ EVENT_SCAN_RESULTS, /** * EVENT_ASSOCINFO - Report optional extra information for association * * This event can be used to report extra association information for * EVENT_ASSOC processing. This extra information includes IEs from * association frames and Beacon/Probe Response frames in union * wpa_event_data::assoc_info. EVENT_ASSOCINFO must be send just before * EVENT_ASSOC. Alternatively, the driver interface can include * assoc_info data in the EVENT_ASSOC call if it has all the * information available at the same point. */ EVENT_ASSOCINFO, /** * EVENT_INTERFACE_STATUS - Report interface status changes * * This optional event can be used to report changes in interface * status (interface added/removed) using union * wpa_event_data::interface_status. This can be used to trigger * wpa_supplicant to stop and re-start processing for the interface, * e.g., when a cardbus card is ejected/inserted. */ EVENT_INTERFACE_STATUS, /** * EVENT_PMKID_CANDIDATE - Report a candidate AP for pre-authentication * * This event can be used to inform wpa_supplicant about candidates for * RSN (WPA2) pre-authentication. If wpa_supplicant is not responsible * for scan request (ap_scan=2 mode), this event is required for * pre-authentication. If wpa_supplicant is performing scan request * (ap_scan=1), this event is optional since scan results can be used * to add pre-authentication candidates. union * wpa_event_data::pmkid_candidate is used to report the BSSID of the * candidate and priority of the candidate, e.g., based on the signal * strength, in order to try to pre-authenticate first with candidates * that are most likely targets for re-association. * * EVENT_PMKID_CANDIDATE can be called whenever the driver has updates * on the candidate list. In addition, it can be called for the current * AP and APs that have existing PMKSA cache entries. wpa_supplicant * will automatically skip pre-authentication in cases where a valid * PMKSA exists. When more than one candidate exists, this event should * be generated once for each candidate. * * Driver will be notified about successful pre-authentication with * struct wpa_driver_ops::add_pmkid() calls. */ EVENT_PMKID_CANDIDATE, /** * EVENT_STKSTART - Request STK handshake (MLME-STKSTART.request) * * This event can be used to inform wpa_supplicant about desire to set * up secure direct link connection between two stations as defined in * IEEE 802.11e with a new PeerKey mechanism that replaced the original * STAKey negotiation. The caller will need to set peer address for the * event. */ EVENT_STKSTART, /** * EVENT_FT_RESPONSE - Report FT (IEEE 802.11r) response IEs * * The driver is expected to report the received FT IEs from * FT authentication sequence from the AP. The FT IEs are included in * the extra information in union wpa_event_data::ft_ies. */ EVENT_FT_RESPONSE, /** * EVENT_IBSS_RSN_START - Request RSN authentication in IBSS * * The driver can use this event to inform wpa_supplicant about a STA * in an IBSS with which protected frames could be exchanged. This * event starts RSN authentication with the other STA to authenticate * the STA and set up encryption keys with it. */ EVENT_IBSS_RSN_START, /** * EVENT_AUTH - Authentication result * * This event should be called when authentication attempt has been * completed. This is only used if the driver supports separate * authentication step (struct wpa_driver_ops::authenticate). * Information about authentication result is included in * union wpa_event_data::auth. */ EVENT_AUTH, /** * EVENT_DEAUTH - Authentication lost * * This event should be called when authentication is lost either due * to receiving deauthenticate frame from the AP or when sending that * frame to the current AP. */ EVENT_DEAUTH, /** * EVENT_ASSOC_REJECT - Association rejected * * This event should be called when (re)association attempt has been * rejected by the AP. Information about authentication result is * included in union wpa_event_data::assoc_reject. */ EVENT_ASSOC_REJECT, /** * EVENT_AUTH_TIMED_OUT - Authentication timed out */ EVENT_AUTH_TIMED_OUT, /** * EVENT_ASSOC_TIMED_OUT - Association timed out */ EVENT_ASSOC_TIMED_OUT } wpa_event_type; /** * union wpa_event_data - Additional data for wpa_supplicant_event() calls */ union wpa_event_data { /** * struct assoc_info - Data for EVENT_ASSOC and EVENT_ASSOCINFO events * * This structure is optional for EVENT_ASSOC calls and required for * EVENT_ASSOCINFO calls. By using EVENT_ASSOC with this data, the * driver interface does not need to generate separate EVENT_ASSOCINFO * calls. */ struct assoc_info { /** * req_ies - (Re)Association Request IEs * * If the driver generates WPA/RSN IE, this event data must be * returned for WPA handshake to have needed information. If * wpa_supplicant-generated WPA/RSN IE is used, this * information event is optional. * * This should start with the first IE (fixed fields before IEs * are not included). */ u8 *req_ies; /** * req_ies_len - Length of req_ies in bytes */ size_t req_ies_len; /** * resp_ies - (Re)Association Response IEs * * Optional association data from the driver. This data is not * required WPA, but may be useful for some protocols and as * such, should be reported if this is available to the driver * interface. * * This should start with the first IE (fixed fields before IEs * are not included). */ u8 *resp_ies; /** * resp_ies_len - Length of resp_ies in bytes */ size_t resp_ies_len; /** * beacon_ies - Beacon or Probe Response IEs * * Optional Beacon/ProbeResp data: IEs included in Beacon or * Probe Response frames from the current AP (i.e., the one * that the client just associated with). This information is * used to update WPA/RSN IE for the AP. If this field is not * set, the results from previous scan will be used. If no * data for the new AP is found, scan results will be requested * again (without scan request). At this point, the driver is * expected to provide WPA/RSN IE for the AP (if WPA/WPA2 is * used). * * This should start with the first IE (fixed fields before IEs * are not included). */ u8 *beacon_ies; /** * beacon_ies_len - Length of beacon_ies */ size_t beacon_ies_len; } assoc_info; /** * struct michael_mic_failure - Data for EVENT_MICHAEL_MIC_FAILURE */ struct michael_mic_failure { int unicast; const u8 *src; } michael_mic_failure; /** * struct interface_status - Data for EVENT_INTERFACE_STATUS */ struct interface_status { char ifname[100]; enum { EVENT_INTERFACE_ADDED, EVENT_INTERFACE_REMOVED } ievent; } interface_status; /** * struct pmkid_candidate - Data for EVENT_PMKID_CANDIDATE */ struct pmkid_candidate { /** BSSID of the PMKID candidate */ u8 bssid[ETH_ALEN]; /** Smaller the index, higher the priority */ int index; /** Whether RSN IE includes pre-authenticate flag */ int preauth; } pmkid_candidate; /** * struct stkstart - Data for EVENT_STKSTART */ struct stkstart { u8 peer[ETH_ALEN]; } stkstart; /** * struct ft_ies - FT information elements (EVENT_FT_RESPONSE) * * During FT (IEEE 802.11r) authentication sequence, the driver is * expected to use this event to report received FT IEs (MDIE, FTIE, * RSN IE, TIE, possible resource request) to the supplicant. The FT * IEs for the next message will be delivered through the * struct wpa_driver_ops::update_ft_ies() callback. */ struct ft_ies { const u8 *ies; size_t ies_len; int ft_action; u8 target_ap[ETH_ALEN]; /** Optional IE(s), e.g., WMM TSPEC(s), for RIC-Request */ const u8 *ric_ies; /** Length of ric_ies buffer in octets */ size_t ric_ies_len; } ft_ies; /** * struct ibss_rsn_start - Data for EVENT_IBSS_RSN_START */ struct ibss_rsn_start { u8 peer[ETH_ALEN]; } ibss_rsn_start; /** * struct auth_info - Data for EVENT_AUTH events */ struct auth_info { u8 peer[ETH_ALEN]; u16 auth_type; u16 status_code; const u8 *ies; size_t ies_len; } auth; /** * struct assoc_reject - Data for EVENT_ASSOC_REJECT events */ struct assoc_reject { /** * resp_ies - (Re)Association Response IEs * * Optional association data from the driver. This data is not * required WPA, but may be useful for some protocols and as * such, should be reported if this is available to the driver * interface. * * This should start with the first IE (fixed fields before IEs * are not included). */ u8 *resp_ies; /** * resp_ies_len - Length of resp_ies in bytes */ size_t resp_ies_len; /** * status_code - Status Code from (Re)association Response */ u16 status_code; } assoc_reject; struct timeout_event { u8 addr[ETH_ALEN]; } timeout_event; }; /** * wpa_supplicant_event - Report a driver event for wpa_supplicant * @ctx: Context pointer (wpa_s); this is the ctx variable registered * with struct wpa_driver_ops::init() * @event: event type (defined above) * @data: possible extra data for the event * * Driver wrapper code should call this function whenever an event is received * from the driver. */ void wpa_supplicant_event(void *ctx, wpa_event_type event, union wpa_event_data *data); /** * wpa_supplicant_rx_eapol - Deliver a received EAPOL frame to wpa_supplicant * @ctx: Context pointer (wpa_s); this is the ctx variable registered * with struct wpa_driver_ops::init() * @src_addr: Source address of the EAPOL frame * @buf: EAPOL data starting from the EAPOL header (i.e., no Ethernet header) * @len: Length of the EAPOL data * * This function is called for each received EAPOL frame. Most driver * interfaces rely on more generic OS mechanism for receiving frames through * l2_packet, but if such a mechanism is not available, the driver wrapper may * take care of received EAPOL frames and deliver them to the core supplicant * code by calling this function. */ void wpa_supplicant_rx_eapol(void *ctx, const u8 *src_addr, const u8 *buf, size_t len); void wpa_supplicant_sta_rx(void *ctx, const u8 *buf, size_t len, struct ieee80211_rx_status *rx_status); const u8 * wpa_scan_get_ie(const struct wpa_scan_res *res, u8 ie); #define WPA_IE_VENDOR_TYPE 0x0050f201 #define WPS_IE_VENDOR_TYPE 0x0050f204 const u8 * wpa_scan_get_vendor_ie(const struct wpa_scan_res *res, u32 vendor_type); struct wpabuf * wpa_scan_get_vendor_ie_multi(const struct wpa_scan_res *res, u32 vendor_type); int wpa_scan_get_max_rate(const struct wpa_scan_res *res); void wpa_scan_results_free(struct wpa_scan_results *res); void wpa_scan_sort_results(struct wpa_scan_results *res); /* hostapd functions for driver wrappers */ struct sta_info; struct ieee80211_hdr; void hostapd_new_assoc_sta(struct hostapd_data *hapd, struct sta_info *sta, int reassoc); void hostapd_tx_status(struct hostapd_data *hapd, const u8 *addr, const u8 *buf, size_t len, int ack); void hostapd_rx_from_unknown_sta(struct hostapd_data *hapd, const struct ieee80211_hdr *hdr, size_t len); int hostapd_notif_assoc(struct hostapd_data *hapd, const u8 *addr, const u8 *ie, size_t ielen); void hostapd_notif_disassoc(struct hostapd_data *hapd, const u8 *addr); void hostapd_eapol_receive(struct hostapd_data *hapd, const u8 *sa, const u8 *buf, size_t len); struct hostapd_frame_info { u32 channel; u32 datarate; u32 ssi_signal; }; void hostapd_mgmt_rx(struct hostapd_data *hapd, u8 *buf, size_t len, u16 stype, struct hostapd_frame_info *fi); void hostapd_mgmt_tx_cb(struct hostapd_data *hapd, u8 *buf, size_t len, u16 stype, int ok); void hostapd_michael_mic_failure(struct hostapd_data *hapd, const u8 *addr); struct hostapd_data * hostapd_sta_get_bss(struct hostapd_data *hapd, const u8 *addr); void hostapd_probe_req_rx(struct hostapd_data *hapd, const u8 *sa, const u8 *ie, size_t ie_len); void hostapd_button_pushed(struct hostapd_data *hapd); #endif /* DRIVER_H */