/* * wpa_supplicant/hostapd control interface library * Copyright (c) 2004-2006, Jouni Malinen * * This software may be distributed under the terms of the BSD license. * See README for more details. */ #ifndef WPA_CTRL_H #define WPA_CTRL_H #ifdef __cplusplus extern "C" { #endif /* wpa_supplicant control interface - fixed message prefixes */ /** Interactive request for identity/password/pin */ #define WPA_CTRL_REQ "CTRL-REQ-" /** Response to identity/password/pin request */ #define WPA_CTRL_RSP "CTRL-RSP-" /* Event messages with fixed prefix */ /** Authentication completed successfully and data connection enabled */ #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED " /** Disconnected, data connection is not available */ #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED " /** Association rejected during connection attempt */ #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT " /** wpa_supplicant is exiting */ #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING " /** Password change was completed successfully */ #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED " /** EAP-Request/Notification received */ #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION " /** EAP authentication started (EAP-Request/Identity received) */ #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED " /** EAP method proposed by the server */ #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD " /** EAP method selected */ #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD " /** EAP peer certificate from TLS */ #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT " /** EAP TLS certificate chain validation error */ #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR " /** EAP status */ #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS " /** EAP authentication completed successfully */ #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS " /** EAP authentication failed (EAP-Failure received) */ #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE " /** Network block temporarily disabled (e.g., due to authentication failure) */ #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED " /** Temporarily disabled network block re-enabled */ #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED " /** New scan results available */ #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS " /** wpa_supplicant state change */ #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE " /** A new BSS entry was added (followed by BSS entry id and BSSID) */ #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED " /** A BSS entry was removed (followed by BSS entry id and BSSID) */ #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED " /** RSN IBSS 4-way handshakes completed with specified peer */ #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED " /** Notification of frequency conflict due to a concurrent operation. * * The indicated network is disabled and needs to be re-enabled before it can * be used again. */ #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT " /** WPS overlap detected in PBC mode */ #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED " /** Available WPS AP with active PBC found in scan results */ #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC " /** Available WPS AP with our address as authorized in scan results */ #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH " /** Available WPS AP with recently selected PIN registrar found in scan results */ #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN " /** Available WPS AP found in scan results */ #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE " /** A new credential received */ #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED " /** M2D received */ #define WPS_EVENT_M2D "WPS-M2D " /** WPS registration failed after M2/M2D */ #define WPS_EVENT_FAIL "WPS-FAIL " /** WPS registration completed successfully */ #define WPS_EVENT_SUCCESS "WPS-SUCCESS " /** WPS enrollment attempt timed out and was terminated */ #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT " /* PBC mode was activated */ #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE " /* PBC mode was disabled */ #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE " #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN " #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK " /* WPS ER events */ #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD " #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE " #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD " #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE " #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS " #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG " /** P2P device found */ #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND " /** P2P device lost */ #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST " /** A P2P device requested GO negotiation, but we were not ready to start the * negotiation */ #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST " #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS " #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE " #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS " #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE " #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED " #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED " #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE " #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE " /* parameters: */ #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN " /* parameters: */ #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN " /* parameters: */ #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ " /* parameters: */ #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP " /* parameters: */ #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE" /* parameters: */ #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ " /* parameters: */ #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP " #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED " #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT " #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED " #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id=" /* parameters: */ #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT " #define INTERWORKING_AP "INTERWORKING-AP " #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH " #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED " #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO " /* parameters: */ #define GAS_QUERY_START "GAS-QUERY-START " /* parameters: */ #define GAS_QUERY_DONE "GAS-QUERY-DONE " /* hostapd control interface - fixed message prefixes */ #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED " #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS " #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS " #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED " #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED " #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED " #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED " #define AP_STA_CONNECTED "AP-STA-CONNECTED " #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED " #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA " #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA " #define AP_EVENT_ENABLED "AP-ENABLED " #define AP_EVENT_DISABLED "AP-DISABLED " #define ACS_EVENT_STARTED "ACS-STARTED " #define ACS_EVENT_COMPLETED "ACS-COMPLETED " #define ACS_EVENT_FAILED "ACS-FAILED " #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED " #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL " #define DFS_EVENT_CAC_START "DFS-CAC-START " #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED " #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED " #define AP_CSA_FINISHED "AP-CSA-FINISHED " /* BSS command information masks */ #define WPA_BSS_MASK_ALL 0xFFFDFFFF #define WPA_BSS_MASK_ID BIT(0) #define WPA_BSS_MASK_BSSID BIT(1) #define WPA_BSS_MASK_FREQ BIT(2) #define WPA_BSS_MASK_BEACON_INT BIT(3) #define WPA_BSS_MASK_CAPABILITIES BIT(4) #define WPA_BSS_MASK_QUAL BIT(5) #define WPA_BSS_MASK_NOISE BIT(6) #define WPA_BSS_MASK_LEVEL BIT(7) #define WPA_BSS_MASK_TSF BIT(8) #define WPA_BSS_MASK_AGE BIT(9) #define WPA_BSS_MASK_IE BIT(10) #define WPA_BSS_MASK_FLAGS BIT(11) #define WPA_BSS_MASK_SSID BIT(12) #define WPA_BSS_MASK_WPS_SCAN BIT(13) #define WPA_BSS_MASK_P2P_SCAN BIT(14) #define WPA_BSS_MASK_INTERNETW BIT(15) #define WPA_BSS_MASK_WIFI_DISPLAY BIT(16) #define WPA_BSS_MASK_DELIM BIT(17) /* wpa_supplicant/hostapd control interface access */ /** * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used. * Returns: Pointer to abstract control interface data or %NULL on failure * * This function is used to open a control interface to wpa_supplicant/hostapd. * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path * is configured in wpa_supplicant/hostapd and other programs using the control * interface need to use matching path configuration. */ struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path); /** * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd * @ctrl: Control interface data from wpa_ctrl_open() * * This function is used to close a control interface. */ void wpa_ctrl_close(struct wpa_ctrl *ctrl); /** * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd * @ctrl: Control interface data from wpa_ctrl_open() * @cmd: Command; usually, ASCII text, e.g., "PING" * @cmd_len: Length of the cmd in bytes * @reply: Buffer for the response * @reply_len: Reply buffer length * @msg_cb: Callback function for unsolicited messages or %NULL if not used * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout * * This function is used to send commands to wpa_supplicant/hostapd. Received * response will be written to reply and reply_len is set to the actual length * of the reply. This function will block for up to two seconds while waiting * for the reply. If unsolicited messages are received, the blocking time may * be longer. * * msg_cb can be used to register a callback function that will be called for * unsolicited messages received while waiting for the command response. These * messages may be received if wpa_ctrl_request() is called at the same time as * wpa_supplicant/hostapd is sending such a message. This can happen only if * the program has used wpa_ctrl_attach() to register itself as a monitor for * event messages. Alternatively to msg_cb, programs can register two control * interface connections and use one of them for commands and the other one for * receiving event messages, in other words, call wpa_ctrl_attach() only for * the control interface connection that will be used for event messages. */ int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len, char *reply, size_t *reply_len, void (*msg_cb)(char *msg, size_t len)); /** * wpa_ctrl_attach - Register as an event monitor for the control interface * @ctrl: Control interface data from wpa_ctrl_open() * Returns: 0 on success, -1 on failure, -2 on timeout * * This function registers the control interface connection as a monitor for * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the * control interface connection starts receiving event messages that can be * read with wpa_ctrl_recv(). */ int wpa_ctrl_attach(struct wpa_ctrl *ctrl); /** * wpa_ctrl_detach - Unregister event monitor from the control interface * @ctrl: Control interface data from wpa_ctrl_open() * Returns: 0 on success, -1 on failure, -2 on timeout * * This function unregisters the control interface connection as a monitor for * wpa_supplicant/hostapd events, i.e., cancels the registration done with * wpa_ctrl_attach(). */ int wpa_ctrl_detach(struct wpa_ctrl *ctrl); /** * wpa_ctrl_recv - Receive a pending control interface message * @ctrl: Control interface data from wpa_ctrl_open() * @reply: Buffer for the message data * @reply_len: Length of the reply buffer * Returns: 0 on success, -1 on failure * * This function will receive a pending control interface message. This * function will block if no messages are available. The received response will * be written to reply and reply_len is set to the actual length of the reply. * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach() * must have been used to register the control interface as an event monitor. */ int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len); /** * wpa_ctrl_pending - Check whether there are pending event messages * @ctrl: Control interface data from wpa_ctrl_open() * Returns: 1 if there are pending messages, 0 if no, or -1 on error * * This function will check whether there are any pending control interface * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is * only used for event messages, i.e., wpa_ctrl_attach() must have been used to * register the control interface as an event monitor. */ int wpa_ctrl_pending(struct wpa_ctrl *ctrl); /** * wpa_ctrl_get_fd - Get file descriptor used by the control interface * @ctrl: Control interface data from wpa_ctrl_open() * Returns: File descriptor used for the connection * * This function can be used to get the file descriptor that is used for the * control interface connection. The returned value can be used, e.g., with * select() while waiting for multiple events. * * The returned file descriptor must not be used directly for sending or * receiving packets; instead, the library functions wpa_ctrl_request() and * wpa_ctrl_recv() must be used for this. */ int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl); char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl); #ifdef ANDROID /** * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that * may be left over from clients that were previously connected to * wpa_supplicant. This keeps these files from being orphaned in the * event of crashes that prevented them from being removed as part * of the normal orderly shutdown. */ void wpa_ctrl_cleanup(void); #endif /* ANDROID */ #ifdef CONFIG_CTRL_IFACE_UDP /* Port range for multiple wpa_supplicant instances and multiple VIFs */ #define WPA_CTRL_IFACE_PORT 9877 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */ #define WPA_GLOBAL_CTRL_IFACE_PORT 9878 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */ #endif /* CONFIG_CTRL_IFACE_UDP */ #ifdef __cplusplus } #endif #endif /* WPA_CTRL_H */