Commit Graph

9928 Commits

Author SHA1 Message Date
Jithu Jance
efa232f915 Add support for virtual interface creation/deletion
Extend interface_add and interface_remove commands via an optional
argument to allow wpa_supplicant to create/delete a new virtual
interface.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2015-03-26 22:20:35 +02:00
Mikael Kanstrup
ba87329d96 wpa_cli: Use .wpa_cli_history under Android
wpa_cli already implements a command history file for easy accessing
commands previously used. Enable the functionality on Android, too.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-03-26 15:29:13 +02:00
Jouni Malinen
8278138e67 tests: Verify OSEN BSS flag in scan results
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-25 16:05:35 +02:00
Ben Greear
0f8385e6fa Show OSEN key management properly in scan results
Old code defaulted to WEP for an AP advertising OSEN. Show as OSEN
instead. Re-use most of the RSN parsing logic since all but the header
is the same.

Example output:

[root@ath9k-f lanforge]# ./local/bin/wpa_cli -i sta0 scan_results
bssid / frequency / signal level / flags / ssid
00:0e:8e:6f:40:49	2462	-23	[OSEN-OSEN-CCMP][ESS]	ben-138

Signed-off-by: Ben Greear <greearb@candelatech.com>
2015-03-25 16:04:03 +02:00
Arkadiusz (Arkq) Bokowy
e7b4cd0c55 wpa_gui: Add tray icon based signal strength meter
System tray icon can be set to 5 different pictographs according to the
connection status. One for disconnected state (not associated with the
network, or not connected with the wpa_supplicant service), and four for
connected status (showing the signal strength on the receiver).

By default this functionality is disabled. The reason for this, is the
fact, that the underlaying approach of this functionality is poll based,
which might be considered as a non-efficient one. Update interval has to
be set explicitly by the user with '-m<seconds>' command line argument.

Status icon names are based on various Gnome icon packs (e.g., Faba).
When icon can not be found, default one is shown (wpa_gui logo).

Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
2015-03-25 15:41:15 +02:00
Ilan Peer
54d3dc9184 AP: Unset HT capabilities for an HT association request without WMM
HT requires QoS/WMM, so unset HT capabilities for a station
whose association request does not include a valid WMM IE.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-03-25 15:02:58 +02:00
Krishna Vamsi
c41d0840a1 nl80211: Allow driver-based roam to change ESS
This extends NL80211_CMD_ROAM event processing to allow the driver to
roam to another ESS (different SSID) when using offloaded BSS selection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-24 21:13:28 +02:00
Jouni Malinen
05121d3564 tests: Change proxyarp_open LL src MAC check to match requirements
Now that there is a kernel patch for IPv6 ProxyARP that is capable of
using the non-AP STAs MAC address as the link layer source address in
NA, validate that behavior rather than the temporary check for BSSID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-24 20:33:33 +02:00
Jouni Malinen
6ba7ebac8a Add OpenSSL 0.9.8zf patch for EAP-FAST support
OpenSSL project reformatted all the source code files, so the 0.9.8za
version of the patch did not apply anymore.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-24 16:48:04 +02:00
Ashok Kumar Ponnaiah
1de071007e atheros: Clear WPS appie during deinit
The WPS IE(s) need to be cleared from the driver explicitly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-24 15:05:43 +02:00
Manikandan Mohan
857d94225a Extend offloaded ACS QCA vendor command to support VHT
Update ACS driver offload feature for VHT configuration. In addition,
this allows the chanlist parameter to be used to specify which channels
are included as options for the offloaded ACS case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-23 12:18:05 +02:00
Jouni Malinen
0fd52a612a Remove duplicated wpa_s->conf->interworking check
wpas_add_interworking_elements() does not need to do this since the
caller is already checking whether Interworking is enabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-22 21:48:41 +02:00
Ilan Peer
ad4430971f Add Extended Capabilities element to all Probe Request frames
Always add the Extended Capabilities element to Probe Request frames (in
case it is not all zeros) to publish support for driver advertised
capabilities and wpa_supplicant specific capabilities.

This also fixes the case where Extended Capabilities element was added
for Interworking cases, but did not use the driver advertised ones and
did not handle other capabilities supported by wpa_supplicant.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-03-22 21:48:38 +02:00
Jouni Malinen
a539d3f71f tests: Automatic reconnection on re-enabling temporarily disabled network
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-22 20:54:07 +02:00
Avraham Stern
9bd566a33a Delay AP selection if all networks are temporarily disabled
If all networks are temporarily disabled, delay AP selection until at
least one network is enabled. Running AP selection when all networks are
disabled is useless as wpa_supplicant will not try to connect. In
addition, it will result in needless scan iterations that may delay the
connection when it is needed.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-03-22 20:53:58 +02:00
Avraham Stern
701f3961e3 Don't optimize scan frequencies if selected network has changed
When disconnecting from a BSS, the next scan is optimized to scan only
the channels used by the connected ESS. But when disconnecting because a
new network was selected, this optimization is wrong because
wpa_supplicant is now trying to connect to another ESS. Fix this by not
optimizing the scan frequencies in case the selected network has
changed.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-03-22 20:36:01 +02:00
Jouni Malinen
24b3b32316 tests: Remove debug print from ap_wpa2_psk_incorrect_passphrase
This development time debug print was forgotten into the test script.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-22 20:36:01 +02:00
Jouni Malinen
8aba435b16 tests: Make ap_vlan_wpa2_radius_id_change more robust
Wait for the 4-way handshake completion instead of assuming it gets done
in 0.1 seconds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 17:51:18 +02:00
Jouni Malinen
898c959a6f tests: P2P_SERVICE_DEL asp all
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 15:56:59 +02:00
Max Stepanov
e9d280503a P2PS: Extend p2p_service_del asp to support 'all' parameter
Extend p2p_service_del asp command to support 'all' parameter to delete
all ASP service advertisements.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-03-20 15:56:59 +02:00
Max Stepanov
6dd51ecbf1 P2PS: Add P2PS advertisements on ALL_SERVICES ANQP query
Add P2PS advertisements to a query response on ANQP query of
ALL_SERVICES type.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-03-20 15:56:59 +02:00
Max Stepanov
c40a8918ec P2PS: Delete ASP advertisements on wpas_p2p_service_flush
Delete all ASP serice advertisement on wpas_p2p_service_flush similarly
to Bonjour and UPnP services.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-03-20 15:56:59 +02:00
Max Stepanov
2dc422e2b3 P2PS: Update SD indicator value on ASP add/del/update
Update a service update indicator value on ASP service advertisement
add/del/update operations.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-03-20 15:56:59 +02:00
Eliad Peller
030a3e12da DFS: Fix range availability check
There's off-by-one in the range availability check - the case of
first_chan_idx + num_chans == num_channels should be allowed (e.g., 0 +
1 == 1, for the case of a single 20 MHz channel).

Signed-off-by: Maital Hahn <maitalm@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2015-03-20 15:56:59 +02:00
Eliad Peller
56ef99255c DFS: Consider non-contiguous channels
When looking for a new operating channel, consider the case of
non-contiguous channels when checking all the needed channels (e.g., the
driver might support channels 36, 38, 40, so look for channels 36+40
explicitly, instead of failing when encountering channel 38).

Signed-off-by: Eliad Peller <eliad@wizery.com>
2015-03-20 15:56:59 +02:00
Victor Goldenshtein
6ceea4c3cb Restart sched_scan on channel list change
The channel list can be changed as a result of arriving beacon hints
during normal scan or as a result of local Reg-Domain change. Some
passive channels can become active and needs to be reconfigured
accordingly for the scheduled scan.

This fixes the connection to hidden SSIDs on 5 GHz band during default
Reg-Domain 00 (world roaming).

Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2015-03-20 15:56:59 +02:00
Eliad Peller
e7a296ba13 Remove unused shared_freq driver op
This driver op is not used anymore

Signed-off-by: Eliad Peller <eliad@wizery.com>
2015-03-20 15:56:59 +02:00
Jouni Malinen
58e115b869 Fix hlr_auc_gw build with OpenSSL
Commit 983c6a606b ('OpenSSL: Replace
internal HMAC-MD5 implementation') forgot to make inclusion of md5.o
conditional for hlr_auc_gw build.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 15:56:59 +02:00
Zefir Kurtisi
5f9c92f8f7 nl80211: Fix vendor command handling
In wiphy_info_handler(), vendor specific commands were
interpreted as QCA specific without checking for the OUI,
which caused incorrect setting of driver flags with
commands from other vendors. As a result, that could
prevent proper operation (e.g., inability to process CSA).

This patch ensures that QCA vendor specific commands are
checked against QCA OUI before related flags are set.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
2015-03-20 15:56:59 +02:00
Jouni Malinen
55e8f0eafc Fix CONFIG_EAP_UNAUTH_TLS without CONFIG_EAP_TLS build
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 15:56:59 +02:00
Jouni Malinen
5f6ce5b503 tests: INTERWORKING_SELECT blocking SCAN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 15:56:59 +02:00
Neelansh Mittal
9772af66ba Interworking: Prevent scan during ANQP fetch and Interworking select
Reject external scan request while either ANQP fetch or Interworking
select is in progress. Not doing so could lead to a situation in which
Interworking automatic network selection does not get triggered because
of a new scan result event forcing the ANQP fetch cycle to be disrupted
and restarted all over again. Interworking automatic network selection
is only triggered when AQNP fetch cycle, that is, ANQP exchange with
every Interworking capable BSS in the current BSS list, is completed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 15:56:48 +02:00
Jouni Malinen
97c6d0d873 tests: AP-STA-POSSIBLE-PSK-MISMATCH
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-19 13:18:44 +02:00
Jouni Malinen
2c50246078 Add a AP mode event message for possible PSK/passphrase mismatch
If the AP/Authenticator receives an EAPOL-Key msg 2/4 for an association
that negotiated use of PSK and the EAPOL-Key MIC does not match, it is
likely that the station is trying to use incorrect PSK/passphrase.
Report this with "AP-STA-POSSIBLE-PSK-MISMATCH <STA addr>" control
interface event.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-19 13:14:21 +02:00
Jouni Malinen
a14a5f244a tests: Disable and re-enable hostapd interface
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-19 12:57:37 +02:00
Jouni Malinen
6784168d07 Remove SChannel support
SChannel/CryptoAPI as a TLS/crypto library alternative was never
completed. Critical functionality is missing and there are bugs in this
implementation. Since there are no known plans of completing this
support, it is better to remove this code.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-18 22:31:36 +02:00
Arkadiusz (Arkq) Bokowy
0b08f25445 wpa_gui: Documentation update
In the commit 77b244d577a7cb5c928478627af6687a0733193d9 ('wpa_gui: Quiet
mode - disable tray icon messages') a new parameter has been introduced,
but it was not documented. This commit fixes this omission.

Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
2015-03-16 12:30:12 +02:00
Peter Oh
6128a90979 hostapd: Add channel 140 to allowed HT40 channel pairs
Channel 140 is needed as allowed HT40 channel pair to use
channel 144 introduced in 802.11ac for VHT40 and VHT80.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
2015-03-16 12:03:36 +02:00
Jouni Malinen
47af258687 tests: GET ip_addr_go
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 21:03:39 +02:00
Mikael Kanstrup
8ffaafae07 wpa_cli: Add missing parameters for "set" command completion routine
Some config parameters were missing in the "set" command completion
routine. Add missing parameters and while at it put the parameters
under compiler switches so only valid ones are shown.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-03-15 21:00:57 +02:00
Mikael Kanstrup
0fd9d95fde wpa_cli: Add completion routine for "get" command
Add tab completion function that includes all available "get"
parameters.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-03-15 21:00:17 +02:00
Mikael Kanstrup
5c6c315fba Add IPv4 support function for "get" control interface command
Add support to retrieve IPv4 config variables with the "get" control
interface command. This allows the ip_addr_* parameters for P2P+NFC
IP address assignment to be fetched from the GO.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-03-15 20:57:16 +02:00
Jouni Malinen
74fa78b281 Add AVG_BEACON_RSSI to SIGNAL_POLL output
If the driver reports separate signal strength average for Beacon
frames, report that in SIGNAL_POLL output.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:45:20 +02:00
Janusz Dziedzic
4acdc48a43 nl80211: Handle NL80211_ATTR_EXT_FEATURES attribute
Handle NL80211_ATTR_EXT_FEATURES attribute and
NL80211_EXT_FEATURE_VHT_IBSS to determine whether
the driver supports VHT with IBSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-03-15 20:36:49 +02:00
Jouni Malinen
a0563ac626 Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2015-03-04.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:35:21 +02:00
Jouni Malinen
0f89328575 P2P: Move upper layer SD interaction into a separate file
wpa_supplicant/p2p_supplicant.c has reached almost 10000 lines in length
and was getting a bit inconvenient to edit, so start splitting it into
separate files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:25:48 +02:00
Jouni Malinen
8b949804b3 FT: Avoid unnecessary allocation for MIC calculation
Use the vector version of omac1_aes_128() to avoid unnecessary memory
allocation for each FTIE MIC calculation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:18:14 +02:00
Jouni Malinen
18da814be7 The master branch is now used for v2.5 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 19:38:15 +02:00
Jouni Malinen
bc04db9b06 Change version information for the 2.4 release
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 19:30:39 +02:00
Jouni Malinen
211bb7c5ea tests: WPA2-PSK-FT AP over DS and unexpected response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 16:36:37 +02:00