Commit Graph

8538 Commits

Author SHA1 Message Date
Jouni Malinen
ef985058f4 nl80211: Use NL80211_CMD_DEL_STATION event to indicate IBSS peer loss 2011-03-23 15:32:55 +02:00
Jouni Malinen
d47fa330b8 random: Read /dev/random in the background with eloop read socket
This makes it more likely to be able to fetch the 20 octet seed from
/dev/random in cases where other programs may also be competing for
this.
2011-03-22 23:15:00 +02:00
Johannes Berg
c4bb881743 nl80211: Do not add interface to the global list in case of failure
This avoids leaving a freed interface on the global list in case
driver initialization fails.
2011-03-22 15:52:04 +02:00
Jouni Malinen
cd9fc7869a hostapd: Add testing mode for RSN element extensions
CFLAGS += -DCONFIG_RSN_TESTING in .config and rsn_testing=1 in
hostapd.conf can now be used to enable a testing mode that adds
extensions to RSN element. This can be used to check whether
station implementations are incompatible with future extensions
to the RSN element.
2011-03-21 13:59:05 +02:00
Sam Leffler
78633c3709 wpa_supplicant: Parameterize BSS table expiration age + count
Replace compile-time BSS cache expiration age and scan count by config
parameters that can be set via wpa_cli and the new D-Bus API. The latter
is done with interface properties BSSExpireAge and BSSExpireCount.
2011-03-20 12:40:59 +02:00
Paul Stewart
cfe53c9aa5 wpa_supplicant: Start bgscan on COMPLETED, not ASSOCIATED
Move the code snippet to switch on bgscan over to wpa_supplicant.c
from event.c, so that it can be activated on wpa_supplicant_set_state().
Also create a centralized place to switch off bgscan. bgscan is now
turned on in COMPLETED, not ASSOCIATED.
2011-03-20 12:27:03 +02:00
Jouni Malinen
87880919ad Fix a typo in a comment 2011-03-20 12:15:02 +02:00
Sam Leffler
7c49fdd0bd dbus: Add RemoveAllNetworks to the new D-Bus API
This adds a new command to the interface to remove all configured
netblocks. Without this it's necessary to query properties on the
interface and explicitly remove each netblock.
2011-03-20 12:12:12 +02:00
Nathan Williams
bc8397822b wpa_supplicant: Search BSS list from back to front
This fixes an issue seen in our wifi testbed, where we frequently
switch the SSID of the AP. wpa_supplicant's BSS list will have, for
example both <bssid, "Check11b"> (from the previous test) and <bssid,
"Check11g"> (from the current test) - note that the bssid is the same for
both. The (old) D-Bus API for fetching scan responses from wpa_supplicant
is fetch-by-bssid, so the caller (flimflam) incorrectly believes we're
associated with <bssid, "Check11b">.
2011-03-20 12:06:36 +02:00
Sam Leffler
2b65b30da8 dbus: Add D-Bus methods to flush the BSS cache
Add an "Interface.FlushBSS" method to the new D-Bus API and a "flush"
method to the old API. Both take an age parameter that is a threshold
(in seconds) for selecting entries to evict. Setting this parameter
to zero flushes all entries from the cache.

This mechanism is useful for a connection manager to clear state at
startup and on resume (where the age parameter may be used to hold
onto recent/valid data).
2011-03-20 12:02:33 +02:00
Sam Leffler
d4c1ec56f1 dbus: Add ConfigFile to AddInterface properties
This provides feature parity with the old-style D-Bus API. Explicit
properties to control global parameters is preferred but until that
happens this allows doing things like setting pkcs11_engine_path and
pkcs11_module_path via D-Bus.
2011-03-20 11:52:57 +02:00
Jouni Malinen
fe885594ac Document CONFIG_DEBUG_SYSLOG and CONFIG_DEBUG_SYSLOG_FACILITY 2011-03-20 11:49:41 +02:00
Sam Leffler
3e1996216e Add support for setting the syslog facility from the config file
This enables setting the syslog facility at build time.
2011-03-20 11:48:42 +02:00
Johannes Berg
c76e5d7f9b wpa_s AP mode: complete only when setup is complete
The AP code might, currently only in the case of HT40, defer actual
enabling to after a scan. In this case, the wpa_s AP code gets confused.
Add a callback for it to use and make it use it to finish only when the
setup has actually completed.

With appropriate hacks in place this allows using HT40 in P2P mode.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 13:11:15 +02:00
Johannes Berg
c202f19c68 wpa_s AP mode: propagate scan event
When wpa_s scans in AP mode, it doesn't propagate the scan event to the
AP code, so that code can get stuck if it uses the callbacks there.
Simply call them where appropriate.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 13:08:08 +02:00
Jean-Michel Bachot
046ef4aa67 P2P: Add option for requested device type in P2P search/scan
With this, p2p_find can be extended to find certain requested device
types.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 12:57:46 +02:00
Jouni Malinen
10c5d2a593 P2P: Use a single define for max number of vendor extensions 2011-03-19 12:22:24 +02:00
Jean-Michel Bachot
6f2c060711 P2P: Keep track of peer WPS vendor extensions
Make the P2P code keep track of WPS vendor extensions received from
peers so they can be exposed via DBus later.

Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 12:22:21 +02:00
Jean-Michel Bachot
f95cac271b P2P: Allow adding of WPS vendor extension attributes
This adds the ability to add WPS vendor extension attributes in P2P
frames, like GO Negotiation and Probe Response frames.

Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 12:22:18 +02:00
Jean-Michel Bachot
4028a7fd43 WPS: Add support for adding WPS Vendor Extensions
This adds the ability to add WPS vendor extensions to an AP (or GO).
They will be added to the WSC IE(s) in Beacon and Probe Response frames.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 12:22:16 +02:00
Jouni Malinen
f3cb52fb90 WPS: Move P2P extension generation for WSC IE in Beacon frames
This cleans up debug log by keeping the WSC IE attributes for Beacon
frames before starting to build the Probe Response frame.
2011-03-19 12:22:09 +02:00
Xi Chen
ea244d2156 IBSS RSN: Clear IBSS RSN peers based on peer lost events 2011-03-18 17:04:46 +02:00
Johannes Berg
2f646b6e83 WPS: Store (secondary) device type as binary
Instead of converting back and forth from the string representation,
always use the binary representation internally.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-17 18:50:22 +02:00
Jouni Malinen
85a821d611 WPS: Fix copying of UUID from the first interface
Use the first interface (last in the list), not the last added
interface. In addition, use the same routine to set the UUID
after reconfiguration.
2011-03-17 18:07:00 +02:00
Jouni Malinen
f2b3c6bc9c WPS: Add more debug information to PBC session overlap check 2011-03-17 18:04:56 +02:00
Jouni Malinen
0439b08d3d WPS: Fix active PBC session removal to ignore MAC address
Use only the UUID-E to remove active PBC session(s) at the completion of
successful PBC protocol run. This fixes potential issues with Enrollees
that use multiple MAC addresses and as such, can get multiple entries in
the PBC session list.
2011-03-17 18:03:20 +02:00
Jouni Malinen
586bad514b Make the link process quieter unless V=1 is specified
Hide the long command lines used for linking the binaries in the
default build. "make V=1" can be used to show the actual commands
if needed.
2011-03-17 12:31:38 +02:00
Jean-Michel Bachot
e57ae6e19e P2P: Keep track of secondary device types for peers
Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-17 11:45:46 +02:00
Jean-Michel Bachot
8e8c0df158 P2P: Add Secondary Device Type list in Probe Response frames
Add Secondary Device Type List attribute in WSC IE for P2P
Probe Response frames if one or more secondary device types
are configured.

Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-17 11:16:23 +02:00
Jean-Michel Bachot
a9e86bfb74 WPS: Add secondary device types into Probe Request frames
The secondary device type list is an optional attribute in the WSC IE.

Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-17 11:09:49 +02:00
Xi Chen
13579b987b IBSS RSN: Enable group rekeying every 10 minutes 2011-03-16 16:28:56 +02:00
Xi Chen
92ac6376c4 IBSS RSN: Add for_each_sta handler for authenticator 2011-03-16 16:28:32 +02:00
Xi Chen
f385833bda IBSS RSN: Add supp_get_state handler 2011-03-16 16:27:08 +02:00
Xi Chen
df41824501 IBSS RSN: Do not start if not yet connected to IBSS
This is used to avoid starting IBSS RSN processing with a peer before
the IBSS connection itself has been completed.
2011-03-16 16:26:26 +02:00
Johannes Berg
ee7ab173c7 nl80211: Implement deauth/disassoc for non-HOSTAPD case
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-16 16:11:05 +02:00
Johannes Berg
d8a43924ec wpa_s AP mode: Add notification functions for STA authorized
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-16 15:58:41 +02:00
Catalin Drula
5b49c9d5ed dbus: Fix interface list getter with multiple interfaces
There's a bug in the getter for the 'Interfaces' property
of /fi/w1/wpa_supplicant1 (new D-Bus interface) which causes a
'Segmentation Fault' when there are multiple interfaces.
2011-03-16 12:30:09 +02:00
Helmut Schaa
4f6bd86d07 hostapd: Don't force HT Mixed Mode for non-GF STAs
Currently hostapd will force HT Mixed Mode if at least one non-GF STA is
associated. This will force _all_ HT transmissions to be protected.

802.11n-2009 doesn't require HT Mixed Mode to be used in case of non-GF
STAs but instead the HT information element contains a flag if non-GF
STAs are present. All STAs are required to protect GF transmissions in
that case. Hence, setting HT Mixed mode if non-GF STAs are present is
superfluous.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2011-03-16 11:56:39 +02:00
Sujith Manoharan
ec2b890981 HT: Skip ht_capab validation if ieee80211n=0
There is no point in running through the 40 MHz scan if HT is
actually disabled regardless of whether the ht_capab parameter
is set.
2011-03-16 11:22:40 +02:00
Jouni Malinen
4db9f805c7 Move .config to the toplevel .gitignore 2011-03-15 17:52:13 +02:00
Dmitry Shmidt
c6a3a11048 Check select() return value in wpa_ctrl_request()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-03-15 15:54:21 +02:00
Jouni Malinen
8e8f849f9d Android: Use /data/system/wpa_supplicant path as default in wpa_cli 2011-03-15 15:27:17 +02:00
Jouni Malinen
c5c5817c33 wpa_cli: Allow wpa_supplicant control interface default to be changed
CONFIG_CTRL_IFACE_DIR can now be defined to modify the default directory
wpa_cli uses for the wpa_supplicant control interface.
2011-03-15 15:26:27 +02:00
Dmitry Shmidt
b1001e4c45 wpa_cli: Add Android socket support
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-03-15 15:18:07 +02:00
Paul Stewart
5bbf9f1086 Add DBus state change notification for AuthMode property
Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:54:59 +02:00
Paul Stewart
ba6f267f64 dbus: Add D-Bus method for current authentication mode
Chooses between EAP and non-EAP authentication modes and
uses the appropriate method to retrieve the name.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:53:56 +02:00
Paul Stewart
cf83fb0b5b wpa_supplicant: Add wpa_supplicant_get_eap_mode method
Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:53:08 +02:00
Paul Stewart
c83e2e1c45 eapol_supp: Request EAP method from EAP state machine
Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:49:26 +02:00
Paul Stewart
8813e4d57e eap_peer: Add method to return current method name
If there is an active EAP method, return its name.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:47:33 +02:00
Jouni Malinen
e17a2477db nl80211: Extend bridge add/del operations for secondary BSSes
Previously, only the main interface was added to a bridge. Extend this
to apply to all configured BSSes.
2011-03-15 13:02:49 +02:00