Commit Graph

9583 Commits

Author SHA1 Message Date
Jouni Malinen
3da112c5af tests: Use direct fst_test_common access
There is no need to go through fst_module_aux to reach fst_test_common
since both of these get imported here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:02:46 +03:00
Jouni Malinen
febd7a4c40 tests: FST attach with llt=0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:01:44 +03:00
Jouni Malinen
742408afa8 tests: Verify wpa parameter in hostapd GET_CONFIG
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-18 00:20:23 +03:00
Mohammed Shafi Shajakhan
de7581ef68 hostapd: Add current wpa parameter into GET_CONFIG output
This can be used, e.g., by an action script to update new WPS
settings for the AP.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
2015-07-18 00:17:34 +03:00
Mohammed Shafi Shajakhan
b8e5426dad hostapd_cli: Allow PID file to be specified
This can help when running multiple hostapd_cli instances
per interface and need to kill them correspondingly.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
2015-07-18 00:15:36 +03:00
Jouni Malinen
b6387212f5 tests: Add coverage for new vht_capab values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-18 00:00:20 +03:00
Vivek Natarajan
442ffc51ac hostapd: Extend the sounding and BF steering capabilities
Depending on the number of antennas, the txbf sounding
and steering capabilites need to be extended.

Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com>
2015-07-17 23:58:15 +03:00
Jouni Malinen
087632168b tests: Add hostapd interface with driver specified
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 23:57:04 +03:00
PavanKumar N
fab51186dc Allow driver to be set in hostapd through global control interface
This extends the hostapd global control interface ADD command to allow
driver wrapper to be specified ("ADD <ifname> <ctrl_iface> <driver>").
Previously, this case that did not use a configuration file allowed only
the default driver wrapper to be used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 23:54:29 +03:00
Jouni Malinen
faf7ce5d4f Drop CONFIG_TI_COMPILER ifdefs
This experimental support for Texas Instruments C compiler was never
fully completed and it has not really been used in close to ten years,
so drop this to simply the header files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-17 21:57:07 +03:00
Jouni Malinen
c7068f106f WPS: Avoid bogus static analyzer warning in ndef_parse_record()
Use a local variable and check the record payload length validity before
writing it into record->payload_length in hopes of getting rid of a
bogus static analyzer warning. The negative return value was sufficient
to avoid record->payload_length being used, but that seems to be too
complex for some analyzers. (CID 122668)

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 20:43:17 +03:00
Jouni Malinen
6462e7387d FST: Avoid using pointer to mgmt->u.action.u.fst_action
Typecasting &mgmt->u.action.u.fst_action to a struct pointer for various
FST Action frame payloads seemed to be triggering static analyzer
warnings about bounds checking since sizeof(mgmt->u.action.u.fst_action)
== 1 even though that is really a variable length structure. Try to
avoid this by calculating the pointer for the beginning of the frame
instead of variable length struct. (CID 125642)

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 20:37:15 +03:00
Jouni Malinen
85b563f7a4 P2P: Clear p2p->ssid_set on flush
It was possible for the previously set SSID to remain in place between
test cases (e.g., in sequence "p2ps_connect_adv_go_persistent
p2p_set_ssid_postfix") and the P2P SSID postfix not getting used
properly. Make this less likely to occur by clearing the old SSID in
p2p_flush().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 20:32:13 +03:00
Jouni Malinen
f752fd9264 tests: FST session create OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
19a0602d86 tests: FST send action OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
d99ed42a15 tests: FST AP configuration and OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
5e2ad41da3 tests: FST protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
9721b083f4 FST: Remove the IE header len/size macros
These are confusing when the style used with the couple of FST IE checks
differs from the rest of hostapd/wpa_supplicant implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:06:48 +03:00
Jouni Malinen
f5f1cc9307 FST: Clean up fst_group_update_ie()
None of the callers passed in cleaning_up == TRUE, so drop that unused
code path.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:06:48 +03:00
Jouni Malinen
2bb51eddad FST: Move fst_mbie_get_peer_addr() into fst_group.c
There is no need for this function to be an inline function in a header
file since it is used only within fst_group.c.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:06:48 +03:00
Jouni Malinen
b7a07937ee FST: Show FST IE update details in debug log
This makes it more convenient to debug FST IE updates.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 16:29:20 +03:00
Jouni Malinen
780753fab2 FST: Clear hostapd fst_ies on FST-DETACH to avoid use of freed memory
This is needed in the corner case of FST-DETACH being used without
stopping the AP instance.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 16:29:20 +03:00
Jouni Malinen
be9fbd9b67 FST: Fix FST Action frame length validation
Commit 717333f4e4 ('FST: Add the Fast
Session Transfer (FST) module') performed incorrect frame length
validation for Setup Request (did not remove 24+1 header from
consideration) and did not include payload validation for other FST
Action frames. Fix these by explicitly verifying that the payload of
these frames is sufficiently long before reading the values from there.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 13:00:17 +03:00
Jouni Malinen
66d464067d FT: Register RRB l2_packet only if FT-over-DS is enabled
There is no need to waste resources for this packet socket if FT-over-DS
is disabled or when operating P2P GO or AP mode in wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 11:16:15 +03:00
Jouni Malinen
898a9790ad Document hostapd ft_over_ds configuration parameter
This had been forgotten from hostapd.conf.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 11:16:15 +03:00
Jouni Malinen
6f3815c0da tests: WPA2-PSK-FT RRB protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 11:16:15 +03:00
Anton Nayshtut
6f7b96145f tests: hostapd global-to-local control interface redirection
This implements basic global-to-local control interface command
redirection tests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:23:26 +03:00
Anton Nayshtut
6990d41a74 hostapd: Add global to local control interface redirection
This patch implements global to local control interface redirection in
the same way as it's done for wpa_supplicant. Any global control
interface command beginning with "IFNAME=..." will be routed to the
corresponding local control interface handler.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:21:18 +03:00
Anton Nayshtut
585478e2b9 hostapd: Add hostapd_ctrl_iface_receive_process()
The newly introduced function will be used in followup commits to handle
requests redirected from the global control interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:21:00 +03:00
Jouni Malinen
2531dc9f6b tests: wpa_supplicant ctrl_iface DUP_NETWORK (global)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Anton Nayshtut
daae49955f Add global wpa_supplicant DUP_NETWORK command
This command allows network variables to be copied from one network to
another when the networks belong to different radios. This is similar to
the per-interface DUP_NETWORK command. On the global control interface,
the command syntax is as follows:

DUP_NETWORK <src ifname> <dst ifname> <src network id> <dst network id> <variable name>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
c0183847d9 tests: Silence unnecessary get_driver_status() prints
Commit 53606b105c ('tests: Wait for scan
to complete on all interfaces in reset()') added option of passing
ifname to get_driver_status(). This could result in FAIL-NO-IFNAME-MATCH
returns that get printed out in "Ignore unexpected status-driver line"
messages if the interface is not found. Check for this case to avoid
that unnecessary print.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
85eb89fe56 tests: FST with RSN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
86ba832cf2 tests: FST AP setup failing due to OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
d6d549c47c tests: FST control interface behavior
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Anton Nayshtut
41a256ecd9 tests: Add FST module tests
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Anton Nayshtut
a8dab08a28 FST: Testing support
This patch introduces infrastructure needed for FST module tests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Anton Nayshtut
46ab9b8cf0 nl80211: Register for FST Action frames (STA)
wpa_supplicant will process these Action frames for FST operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Anton Nayshtut
79c7b36d12 FST: wpa_supplicant build rules
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
3794af2dc1 FST: wpa_supplicant control interface
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
9fbfd1b0d4 FST: Send FST Action frame for processing (wpa_supplicant)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
b36a3a65aa FST: Integration into wpa_supplicant
This commit integrates the FST into the wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
55de4d4ba3 FST: wpa_supplicant [FST] flag for BSS in scan results
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
76ca15b7db FST: wpa_supplicant configuration parameters
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
8bae489f15 FST: Do not prune STAs belonging to the same FST
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
ee03910777 FST: Add hostapd_cli fst command
This can be used to issue FST-MANAGER control interface commands.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
8cf53ec9f7 FST: Add build rules for hostapd
This patch integrates the FST into the hostapd.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
347827ff6e FST: Add FST IEs into AP mode management frames
This adds the FST IEs received from the FST module into Beacon, Probe
Response, and (Re)Association Response frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
037378ff31 FST: Send FST Action frames to AP mode processing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
8e9a8b0f8c FST: hostapd control interface
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00