Commit Graph

65 Commits

Author SHA1 Message Date
Jouni Malinen
b1c0e29733 Include config.h explicitly into files that actually use it
hostapd.h does not need to include config.h.
2009-03-25 16:29:00 +02:00
Jouni Malinen
816bce98e1 nl80211: Add per-BSS data structure and enable BSS add/remove
This allows mac80211 to be used for multi-BSSID operations.
2009-03-12 21:55:42 +02:00
Jouni Malinen
f72750896c nl80211: Add verbose result debugging for NL80211_CMD_NEW_STATION 2009-03-05 11:24:48 +02:00
Jouni Malinen
3ae0800c5f WMM cleanup (WME -> WMM rename, comments, etc.)
This updates the terminogy to match with the final WMM specification. In
addition, some of the WMM TSPEC structure fields were in incorrect order
and used without byte order swapping. Those are also taken care of this
cleanup patch.
2009-03-04 12:33:24 +02:00
Jouni Malinen
8807377fe4 nl80211: Add TX/RX packet counts into accounting information 2009-02-18 11:29:45 +02:00
Jouni Malinen
dbdf58b053 driver_nl80211: Fix STA accounting data collection
TX/RX bytes are now reported correctly (typo ended up leaving TX bytes
uninitialized and set RX bytes value to use correct TX bytes). TX/RX
packet counts are not yet available from kernel, so we have to clear the
values to avoid reporting bogus data.
2009-02-16 13:28:42 +02:00
Jouni Malinen
42f1ee7d1f Fixed scan buffer increasing with WEXT
We can now handle up to 65535 byte result buffer which is the maximum
due to WEXT using 16-bit length field. Previously, this was limited to
32768 bytes in practice even through we tried with 65536 and 131072
buffers which we just truncated into 0 in the 16-bit variable.

This more or less doubles the number of BSSes we can received from scan
results.
2009-02-05 12:00:23 +02:00
Jouni Malinen
5eb4e3d024 802.11n: scan for overlapping BSSes before starting 20/40 MHz channel
Try to match PRI/SEC channel with neighboring 20/40 MHz BSSes per
IEEE 802.11n/D7.0 11.14.3.2. This is not yet complete implementation,
but at least some parts of the 40 MHz coex are improved.

40 MHz operation maybe rejected (i.e., fall back to using 20 MHz) or
pri/sec channels may be switched if needed.
2009-02-04 21:19:54 +02:00
Jouni Malinen
30fd5f1467 Verify that driver supports configured HT capabilities 2009-02-04 12:49:23 +02:00
Jouni Malinen
f01a6b1e3e driver_nl80211: Fixed inactivity poll status processing
Previous version was discarding TX status for FromDS data frames, but
those are the exact ones that we need to check for inactivity poll to
work, i.e., they are TX status reports for injected data frames.

In addition, remove the debug printing of TX status for data frame since
that could fill up the debug output if kernel-side filtering cannot be
used with monitor interface.
2009-01-27 16:34:48 +02:00
Johannes Berg
9616af520b driver_nl80211: use Linux socket filter to improve performance
TX status information for all transmitted data frames is not going to
be sent to hostapd anymore, so the CPU load with high traffic load is
going to be significantly reduced.
2009-01-27 12:28:05 +02:00
Jouni Malinen
61e64e7b7f Removed dead code 2009-01-13 19:15:42 +02:00
Jouni Malinen
c77bb61aee Fixed copy-paste error in retry configuration (incorrect ioctl used) 2009-01-13 19:14:38 +02:00
Jouni Malinen
25ba219f3e Removed unused set_regulatory_domain driver function 2009-01-13 19:12:25 +02:00
Jouni Malinen
f49275c92f Fixed build without CONFIG_IEEE80211N 2009-01-12 22:08:53 +02:00
Jouni Malinen
649d8890b1 Add wrapper functions for IEEE 802.11 driver calls into driver.h
These functions allow the driver_*.c wrappers not to include
ieee802_11.h.
2009-01-09 16:55:59 +02:00
Jouni Malinen
b83cbb3b3b Use a wrapper function for ieee802_1x_receive() to avoid ieee802_1x.h
Driver wrappers should not need to include ieee802_1x.h, so use a
wrapper function declared in driver.h.
2009-01-09 16:33:59 +02:00
Jouni Malinen
214021f585 Move RX-from-unknown-STA processing away from driver_*.c
This cleans up the driver wrapper interface by getting rid of sta_info.h
dependency in all drivers that use MLME implementation in hostapd
(driver_hostap.c and driver_nl80211.c).
2009-01-09 15:44:45 +02:00
Jouni Malinen
8607f4c31f Moved TX status processing for STA entries away from driver_*.c
Driver wrappers should not need to know about this level of core hostapd
details.
2009-01-09 15:33:36 +02:00
Jouni Malinen
d200828b41 Moved rfc1042_header into driver_*.c that use it
No need to share such a small buffer and make hostapd.[ch] more complex
with it.
2009-01-09 15:06:48 +02:00
Jouni Malinen
8d06da09a4 Move generic definitions away from hostapd.h
This is an initial step in trying to make hostapd.h not needed to be
included in so many files.
2009-01-08 20:14:05 +02:00
Jouni Malinen
bfddd95c9e Split hostapd/driver.h into two files
driver.h contains the definitions needed in driver wrapper
implementations (driver_*.c) and driver_i.h contains the definitions
that are used in core hostapd code to interact with the driver wrappers.
2009-01-08 20:02:56 +02:00
Jouni Malinen
e834272f73 Include pending MFP defines in nl80211_copy.h
This can be used to get rid of the extra cpp define since we have our
local copy of wireless.h and nl80211.h.
2008-12-31 18:10:14 +02:00
Jouni Malinen
ac43f1fa39 Renamed nl80211 HT channel parameters to match with kernel 2008-12-31 17:59:13 +02:00
Jouni Malinen
d5263983ac MFP: Remove mac80211 workaround of IGTK in monitor netdev
mac80211 can now figure out which key to use for injected frames (in
most cases), so we can remove the workaround for configuring IGTK on the
monitor interface that is used for injecting frames.
2008-12-31 17:48:13 +02:00
Jouni Malinen
205a372b2d Added libnl 2.0 compatibility code (CONFIG_LIBNL20=y in .config needed)
Unfortunately, at least the current libnl git snapshot changes the API
in backwards incompatible way and in a way that makes it difficult to
to allow building against the latest libnl code.
2008-12-08 22:40:58 +02:00
Jouni Malinen
7e45830ab7 nl80211: Include copy of linux/nl80211.h with hostapd/wpa_supplicant
This makes it easier to build the packages and allows all new features
to be built into the binary regardless of which kernel is currently
used.
2008-12-08 11:04:13 +02:00
Jouni Malinen
bb9f45e0bb nl80211: Remove the debug print from data frame processing
This is currently happening way too frequently (mac80211 monitor
interface sends TX info for every frame) and the end result makes it
difficult to read hostapd debug log if there is large amount of data
traffic.
2008-12-04 14:20:33 +02:00
Jouni Malinen
4a7b9f885f Fixed WEP authentication (both Open System and Shared Key) with mac80211
Only one of the authentication frame types is encrypted. In order for
static WEP encryption to work properly (i.e., to not encrypt the frame),
we need to tell mac80211 about the frames that must not be encrypted.
2008-12-04 13:21:35 +02:00
Jouni Malinen
f07688e37d nl80211: Generate 802.11b mode based on 802.11g information
If the phy info from nl80211 does not include 802.11b mode, generate
that mode based on 802.11g information. This allows hw_mode=b to be used
with drivers that support 2.4 GHz band.
2008-12-03 12:42:21 +02:00
Jouni Malinen
2f4eb31454 Changed NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to use U32 2008-11-26 16:16:28 +02:00
Jouni Malinen
a78d3dbd02 nl80211: Fixed a merge issue in an earlier commit for set_freq 2008-11-26 10:52:45 +02:00
Jouni Malinen
446842b101 nl80211: Clear HT flags from the channel when exiting 2008-11-26 10:51:01 +02:00
Jouni Malinen
fe0f58fa69 Added option to distinguish non-HT and HT20 in set_freq 2008-11-26 10:44:04 +02:00
Jouni Malinen
95da9bbc36 nl80211: Add support for setting channel frequency and HT20 vs. HT40
This depends on a patch to Linux nl80211/mac80211 that has not yet been
merged into wireless-testing. If that change is not present, the old
mechanism (WEXT) will be used instead.
2008-11-25 20:59:39 +02:00
Jouni Malinen
d6c9d4740b driver_nl80211: Added set_country() handler
If country_code is set in hostapd.conf, hostapd will now update nl80211
regulatory data by setting the alpha2 string for CRDA. In other words,
"iw reg set <alpha2>" is not needed anymore when using hostapd.
2008-11-25 12:10:35 +02:00
Jouni Malinen
bf01d8bc2b Get maximum TX power for each allowed channel from mac80211 2008-11-25 11:11:50 +02:00
Jouni Malinen
9ee06a63e5 driver_nl80211: Remove monitor interface if AP initialization fails 2008-11-18 14:55:32 +02:00
Jouni Malinen
10b83bd712 Changed channel flags configuration to read the information from the driver
(e.g., via driver_nl80211 when using mac80211) instead of using hostapd as
the source of the regulatory information (i.e., information from CRDA is
now used with mac80211); this allows 5 GHz channels to be used with hostapd
(if allowed in the current regulatory domain).
2008-11-18 14:51:43 +02:00
Johannes Berg
4aac554ce2 driver_nl80211: Remove set_ssid from nl80211 driver
This is no longer required (and does not work with current
wireless-testing anymore).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2008-11-01 13:45:34 +02:00
Jouni Malinen
fefee8a74d driver_nl80211: Added TX queue parameter configuration 2008-10-29 19:35:17 +02:00
Jouni Malinen
4c99a969e3 driver_nl80211: Added basic rate configuration 2008-10-29 19:34:27 +02:00
Jouni Malinen
8e8df25541 nl80211: Finish dumps properly (ported from iw.git) 2008-10-29 19:28:35 +02:00
Johannes Berg
cafe38cae0 nl80211 hostapd driver: clean up netlink code
Put it into a single place instead of having it all over.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2008-09-29 19:37:24 +03:00
Johannes Berg
6773de39b1 nl80211 driver: correctly set the encrypt bit for eapol frames
A recent kernel change led to all EAPOL frames being encrypted rather than
just those for the group handshake. This is due to transmit processing in
the kernel now using the proper interface which would encrypt those frames
with the group key because hostapd wasn't requesting that they not be
encrypted. This changes the nl80211 driver to not request encryption unless
the EAPOL frame should be encrypted.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2008-09-29 19:21:51 +03:00
Jouni Malinen
9b71728bba Cleaned up TX callback request processing
Move the use of 802.11 header protocol field into driver_hostap.c since
this is a Host AP driver specific mechanism and other driver wrappers
should not really need to know about it.
2008-08-31 11:15:56 +03:00
Jouni Malinen
00ad53ef68 Send HT parameters for new STAs
This depends on a mac80211 patch to add NL80211_ATTR_HT_CAPABILITY
(which is not yet in wireless-testing).
2008-08-25 11:30:39 +03:00
Jouni Malinen
f2c290ccf4 Switched driver_nl80211 to use the new sta_add2() 2008-08-25 10:06:40 +03:00
Jouni Malinen
358921edb7 Added support for setting BSS parameters with NL80211_CMD_SET_BSS
This new cfg80211 command is used for setting CTS protect, short preamble,
and short slot time parameters for the BSS. The matching kernel change has
been submitted, but is not yet included in wireless-testing. The code here
used #ifdef to avoid compilation failures before the new command is
available.
2008-08-07 20:09:55 +03:00
Jouni Malinen
eb0699b6ba Add IGTK/MFP configuration (disabled by default)
Added code to use suggested nl80211/cfg80211 API for setting MFP related
parameters. This is disabled by default since the API changes has not yet
been approved. The new commands can be enabled by defining
NL80211_MFP_PENDING (this will be removed once the API changes is
approved).
2008-06-18 11:23:59 +03:00