Commit Graph

6682 Commits

Author SHA1 Message Date
Jouni Malinen
979be3fecf Use bit mask/shift and helper functions instead of C bit fields 2009-03-04 16:23:44 +02:00
Jouni Malinen
3ae0800c5f WMM cleanup (WME -> WMM rename, comments, etc.)
This updates the terminogy to match with the final WMM specification. In
addition, some of the WMM TSPEC structure fields were in incorrect order
and used without byte order swapping. Those are also taken care of this
cleanup patch.
2009-03-04 12:33:24 +02:00
Jouni Malinen
1c6965f7db Remove unused tsinfo() 2009-03-04 11:32:51 +02:00
Sam Leffler
a83d9c9652 Add build option CONFIG_TERMINATE_ONLASTIF
This makes wpa_supplicant terminate automatically if the configured
interface(s) disappear.
2009-03-02 21:57:00 +02:00
Sam Leffler
daa70d49de Add support for wpa_supplicant syslog output
Enable for build: CFLAGS += -DCONFIG_DEBUG_SYSLOG in .config
Enable at runtime: -s on command line
2009-03-02 21:40:44 +02:00
Jouni Malinen
af12135524 Fix hostapd build with RADIUS support removed 2009-03-02 21:25:53 +02:00
vasanth
35463eaed3 Pass negotiated ht capability information after the association
This patch replaces the station's ht capability information with the
negotiated one in NL80211_CMD_NEW_STATION. This negotiated ht
capability will be needed for rate control initialization in the
driver.

Signed-off-by: vasanth <vasanth@atheros.com>
2009-03-02 19:17:35 +02:00
Jouni Malinen
1fd4b0db7c Fix EAPOL/EAP reauthentication with external RADIUS server
The EAP server state machine will need to have special code in
getDecision() to avoid starting passthrough operations before having
completed Identity round in the beginning of reauthentication. This was
broken when moving into using the full authenticator state machine from
RFC 4137 in 0.6.x.
2009-03-02 19:06:23 +02:00
Jouni Malinen
049a292f89 Fix builds that need SHA256 or mod_exp, but not TLS functions 2009-02-27 17:46:40 +02:00
Jouni Malinen
24466b188a WPS: Convert WEP key to hex
Use of hex is safer since the enrollee may configure AP with 5 or 13
random octets of binary data as the key.
2009-02-27 17:08:17 +02:00
Masashi Honma
d7e9a48f66 Fix Enrollee WPS state attribute in AP
Only non-AP Enrollee should hard code the state to be not configured.
2009-02-27 17:01:17 +02:00
Jouni Malinen
358b98668e Update EAP-GPSK references from internet draft to RFC 5433 2009-02-26 23:08:40 +02:00
Jouni Malinen
f4c617ee4c WPS UFD: Add entry to ChangeLog 2009-02-26 22:10:50 +02:00
Jouni Malinen
116f7bb0a3 WPS UFD: Build OOB functionality only if UFD is enabled 2009-02-26 22:10:21 +02:00
Jouni Malinen
d5e2b2d274 WPS UFD: Use pre-configured DH keys only with OOB
The old behavior of generating new DH keys can be maintained for non-OOB
cases and only OOB (in this case, with UFD) will use the pre-configured
DH keys to allow the public key hash to be checked.
2009-02-26 22:09:35 +02:00
Jouni Malinen
7cbf51bbd8 WPS UFD: Remove oob_dev pointer from wps_context
This pointer and the especially the oob_dev->device_path does not remain
valid, so better not save it any longer than it is needed.
2009-02-26 22:07:55 +02:00
Jouni Malinen
1b39bad109 WPS UFD: Handle scandir() error and no matches results differently
Better make sure there are no memory leaks in case of 0 entries
found. In addition, the error string may be of use in the error case.
2009-02-26 22:06:11 +02:00
Jouni Malinen
e7f3c1f436 WPS UFD: Define macros for the UFD directory templates
This allows the UNIX vs. DOS path separators to be handled in the build.
2009-02-26 22:05:39 +02:00
Jouni Malinen
70e070461d WPS UFD: Use private data structure for oob_device_data
This gets rid of global variable use and may be needed to allow
concurrent access in some case if the interface is extended.
2009-02-26 22:04:49 +02:00
Jouni Malinen
390cd3105d WPS UFD: Make build conditional on CONFIG_WPS_UFD=y
Not all embedded devices have USB interface and it is useful to be able
to remove unneeded functionality from the binary. In addition, the
current implementation has some UNIX specific calls in it which may make
it not compile cleanly on all target systems.
2009-02-26 22:01:36 +02:00
Jouni Malinen
a79e73a1b1 WPS UFD: Use mkdir() instead of system("mkdir ..") 2009-02-26 22:00:29 +02:00
Masashi Honma
46bdb83acd WPS: Add UFD support (USBA out-of-band mechanism)
This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following UFD methods can be used:
- Enrollee PIN with UFD
- Registrar PIN with UFD
- unencrypted credential with UFD

Encrypted credentials are not supported.

Enrollee side operation:
wpa_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

wpa_cli -i ath0 wps_oob ufd /mnt/ pin-r

Registrar side operation:
./hostapd_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

hostapd_cli -i ath0 wps_oob ufd /mnt/ cred
2009-02-26 21:57:38 +02:00
Jouni Malinen
b414900a90 Reduce latency on starting WPS negotiation (TX EAPOL-Start earlier)
Reduce startWhen from 3 to 1 second if WPS is included in the build.
While this is done regardless of runtime WPS configuration, it is fine
to use a smaller value here in general. This cuts two seconds out from
WPS negotiation if the driver does not support addition of WPS IE into
the (Re)Association Request frame.
2009-02-23 20:59:27 +02:00
Jouni Malinen
a9aca28ba3 Fix WPS in non-WPA modes with drivers that implement MLME
Need to set WLAN_STA_WPS and WLAN_STA_MAYBE_WPS flags even if WPA is not
enabled. This allows open and static WEP modes to initiate WPS
negotiation with madwifi-like drivers.
2009-02-23 20:57:07 +02:00
Jouni Malinen
a20088e576 Allow SHA256-based key handshake to be used without 802.11r
Previously, both CONFIG_IEEE80211W=y and CONFIG_IEEE80211R=y were needed
to enable SHA256-based key handshake (WPA-PSK-SHA256 and
WPA-EAP-SHA256). This can now be done with just CONFIG_IEEE80211W=y.
2009-02-19 19:49:34 +02:00
Jouni Malinen
6d7fb6918d Add new driver wrapper for the Atheros driver
This uses similar, but not identical, interface to madwifi. It is easier
to keep this separate to avoid conflicts with potential changes in the
driver interfaces.
2009-02-19 16:27:07 +02:00
Jouni Malinen
d3cba719ff WPS: Use WEP key index 1..4 instead of 0..3 when configuring AP 2009-02-18 20:17:47 +02:00
Andriy Tkachuk
522b5b6ed3 WPS: Fix WEP key index to use 1..4 instead of 0..3
It seems that WFA WPS spec says that default key index should be 1 (not
0). I think this meas that WEP key indexes region is not from 0 to 3,
but from 1 to 4 in WPS. At least WRT610N implemented it this way.
2009-02-18 19:58:44 +02:00
Sebastien Decugis
ab61c4fc36 Fix hostapd build without NEED_MLME
The following patch fixes a compilation issue when compiling hostapd to
serve as pure RADIUS authentication server.
2009-02-18 19:43:07 +02:00
Jouni Malinen
7c2849d2a0 Add BSS flags to scan results to indicate signal quality validity
These flags are used to mark which values (level, noise, qual) are
invalid (not available from the driver) and whether level is using dBm.
D-Bus interface will now only report the values that were available.
2009-02-18 13:40:38 +02:00
Jouni Malinen
d173df5232 nl80211: Use per-scan request WPS IE
Replace the global set probe request IEs mechanism with a new nl80211
option for specifying vendor IEs for each scan request.
2009-02-18 12:49:25 +02:00
Jouni Malinen
8807377fe4 nl80211: Add TX/RX packet counts into accounting information 2009-02-18 11:29:45 +02:00
Jouni Malinen
878ad127ba Sync nl80211_copy.h with wireless-testing linux/nl80211.h 2009-02-18 11:28:55 +02:00
Andriy Tkachuk
4b195a1bc9 WPS: support WEP keys in hex characters format in received credentials
Attached patch makes wpa_supplicant support WEP keys in hex characters
format in received credentials from Registrars (tested with WRT610N).
2009-02-17 10:30:43 +02:00
Andriy Tkachuk
0632542b8b WPS: support registration with APs in WEP security mode
Attached patch fixes the issue when supplicant does not select APs in
WEP security mode for WPS registration.
2009-02-17 10:17:24 +02:00
Jouni Malinen
84992a8fb4 Updated to-do list for wpa_supplicant
No point in using time with Host AP driver optimizations anymore.
Note another race condition with 4-way handshake (and PTK config to
driver).
2009-02-16 20:50:55 +02:00
Jouni Malinen
dbdf58b053 driver_nl80211: Fix STA accounting data collection
TX/RX bytes are now reported correctly (typo ended up leaving TX bytes
uninitialized and set RX bytes value to use correct TX bytes). TX/RX
packet counts are not yet available from kernel, so we have to clear the
values to avoid reporting bogus data.
2009-02-16 13:28:42 +02:00
Jouni Malinen
8a0eae80ac Preparations for 0.6.8 release 2009-02-15 20:17:25 +02:00
Jouni Malinen
caf3159831 Update nmake.mak to match with current files 2009-02-15 18:35:23 +02:00
Jouni Malinen
f2d8fc3d96 Do not try session resumption after EAP failure
If session resumption fails for any reason, do not try it again because
that is just likely to fail. Instead, drop back to using full
authentication which may work. This is a workaround for servers that do
not like session resumption, but do not know how to fall back to full
authentication properly.
2009-02-15 17:36:49 +02:00
Jouni Malinen
c511c8c6e0 Avoid using #ifdef inside printf string
This makes it easier to use a preprocessor macro for printf.
2009-02-15 14:35:30 +02:00
Daniel Mierswa
d94d4bafbb Improved 'make install' (use BINDIR/LIBDIR, install shared objects) 2009-02-15 14:22:50 +02:00
Daniel Mierswa
6301cc5d38 Allow the privsep driver to pass the set_country to the real driver 2009-02-15 14:13:27 +02:00
Jouni Malinen
2cfcd014f4 Check EAP-AKA' AT_KDF duplication only if KDF was negotiated
This fixes an issue where two AKA'/Challenge messages are received when
resynchronizing SEQ#. Previously, this used to trigger an authentication
failure since the second Challenge message did not duplicate AT_KDF.
2009-02-15 10:28:55 +02:00
Jouni Malinen
3fe430b5d5 Add debug prints for couple of new EAP-AKA' attributes 2009-02-15 10:28:16 +02:00
Jouni Malinen
ba2a573c5f Rename "broadcast SSID" to "wildcard SSID"
"Wildcard SSID" is the term used in IEEE Std 802.11-2007, so it is a
better name for the zero-length SSID used in Probe Request.
2009-02-14 22:21:17 +02:00
Jouni Malinen
6a1063e008 driver_nl80211: Add support for multi-SSID scan requests 2009-02-14 21:17:46 +02:00
Jouni Malinen
e76baaac0c Add support for multi-SSID scan requests
If the driver reports support for more than one SSID per scan request,
optimize scan_ssid=1 operations in ap_scan=1 mode. This speeds up
scanning whenever scan_ssid=1 is used since the broadcast SSID can be
included in every scan request and if driver supports more than two
SSIDs in the scan request, the benefits are even larger when multiple
networks have been configured with ap_scan=1.

This is also cleaning up wpa_supplicant_scan() function by moving code
around so that the SSID list is not processed unnecessarily if the
operation mode does not need this.
2009-02-14 20:59:26 +02:00
Jouni Malinen
f55b218a5c driver_test: Implement scan2() handler
This does not actually send out separate scan requests for each SSID,
but the debug output can be used to test scan2() functionality with
multiple SSIDs.
2009-02-14 17:11:21 +02:00
Jouni Malinen
fc2b7ed5f3 Add extended driver scan request command: driver_ops::scan2()
This can be used to provide support for scanning multiple SSIDs at a
time to optimize scan_ssid=1 operations. In addition, Probe Request IEs
will be available to scan2() (e.g., for WPS PBC scanning).
2009-02-14 17:01:32 +02:00