Commit Graph

14290 Commits

Author SHA1 Message Date
Jouni Malinen
f40f8860d2 tests: Enable PMF in ap_hs20_unexpected configuration
This is needed to meet the Hotspot 2.0 Release 2 requirement for the
third station that is actually using RSN.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
ea57b0bcfe tests: Enable PMF in ap_hs20_external_selection network profile
This is required for Hotspot 2.0 Release 2.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
9ce2015a97 HS 2.0: Allocate enough buffer for HS 2.0 Indication element for scan
The HS 2.0 Indication element can be up to 9 octets in length, so add
two more octets to the minimum extra_ie buffer size for scanning.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
dfd1b69de2 tests: Hotspot 2.0 release number indication
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
7436cd366e tests: Update Hotspot 2.0 release number expectation to 3
Match the implementation change to fix the test cases that verified a
specific Hotspot 2.0 release number indication.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
2205ca0dfe HS 2.0: Update supported release number to 3
Release 3 functionality is included, so start advertising support for
that release.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
ec2cf403b8 HS 2.0: As a STA, do not indicate release number greater than the AP
Hotspot 2.0 tech spec mandates mobile device to not indicate a release
number that is greater than the release number advertised by the AP. Add
this constraint to the HS 2.0 Indication element when adding this into
(Re)Association Request frame. The element in the Probe Request frame
continues to show the station's latest supported release number.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
6ae04d7b34 HS 2.0: Allow Hotspot 2.0 release number to be configured
The new hostapd configuration parameter hs20_release can be used to
configure the AP to advertise a specific Hotspot 2.0 release number
instead of the latest supported release. This is mainly for testing
purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:54 +02:00
Jouni Malinen
17adac9ef9 FILS: Do not process FILS HLP request again while previous one is pending
It is better not to process a new (most likely repeated) FILS HLP
request if a station retransmits (Re)Association Request frame before
the previous HLP response has either been received or timed out. The
previous implementation ended up doing this and also ended up
rescheduling the fils_hlp_timeout timer in a manner that prevented the
initial timeout from being reached if the STA continued retransmitting
the frame. This could result in failed association due to a timeout on
the station side.

Make this more robust by processing (and relaying to the server) the HLP
request once and then ignoring any new HLP request while the response
for the relayed request is still pending. The new (Re)Association
Request frames are otherwise processed, but they do not result in actual
state change on the AP side before the HLP process from the first
pending request is completed.

This fixes hwsim test case fils_sk_hlp_oom failures with unmodified
mac80211 implementation (i.e., with a relatively short retransmission
timeout for (Re)Association Request frame).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-07 16:03:40 +02:00
Peng Xu
891e1668c0 hostapd: Update HE Capabilities and Operation element definition
Update HE Capabilities/Operation element definition based on IEEE
P802.11ax/D3.0.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-07 15:17:02 +02:00
Jouni Malinen
678d8410af Move send_probe_response parameter to BSS specific items
This can be more convenient for testing Multiple BSSID functionality.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-07 15:03:11 +02:00
Edayilliam Jayadev
4c02242d04 Define spectral scaling parameters as QCA vendor specific attributes
Add spectral scaling parameters as vendor attributes to the
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO vendor subcommand.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-04 20:57:32 +02:00
Jouni Malinen
4b1ae27974 tests: Connect to WPS AP with NFC connection handover (local failure)
This is a regression test case for a potential NULL pointer
dereferencing fixed in the previous commit.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-04 20:55:20 +02:00
Yu Ouyang
f81e65510c WPS NFC: Fix potential NULL pointer dereference on an error path
The NFC connection handover specific case of WPS public key generation
did not verify whether the two wpabuf_dup() calls succeed. Those may
return NULL due to an allocation failure and that would result in a NULL
pointer dereference in dh5_init_fixed().

Fix this by checking memory allocation results explicitly. If either of
the allocations fail, do not try to initialize wps->dh_ctx and instead,
report the failure through the existing error case handler below.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org
2018-12-04 20:52:34 +02:00
Jouni Malinen
0e1ab324cc HS 2.0 server: Fix couple of memory leaks
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-04 14:12:44 +02:00
Jouni Malinen
718346775d HS 2.0 server: Client certificate reenrollment
This adds support for the SPP server to request certificate reenrollment
and for the EST server to support the simplereenroll version.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-04 14:11:39 +02:00
Jouni Malinen
d726f4da54 HS 2.0 server: Document client certificate related Apache configuration
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-04 00:34:10 +02:00
Jouni Malinen
2166651b0c HS 2.0 server: Clear remediation requirement for certificate credentials
Previous implementation updated user database only for username/password
credentials. While client certificates do not need the updated password
to be written, they do need the remediation requirement to be cleared,
so fix that.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-04 00:34:10 +02:00
Jouni Malinen
34341b09b4 HS 2.0 server: Do not set phase2=1 for certificate-based users
These are not really using Phase 2, so use more appropriate
configuration when going through online signup for client certificates.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-04 00:34:00 +02:00
Jouni Malinen
6ff4241797 HS 2.0 server: Include phase2=0 users for TLS in the user list
EAP-TLS users are not really using phase2, so do not require the
database to be set in a way that claim that inaccurately.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-03 23:38:20 +02:00
Jouni Malinen
11adf76a71 EAP-TLS server: Update user information based on serial number
This allows EAP user database entries for "cert-<serial number>" to be
used for client certificate based parameters when using EAP-TLS. This
commit addresses only the full authentication case and TLS session
resumption is not yet covered.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-03 23:29:56 +02:00
Jouni Malinen
9da196adf9 VLAN: Warn about interface name truncation
Add more snprintf checks to make it clearer if some of the ifname
constructions would end up being too long.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-03 12:44:11 +02:00
Jouni Malinen
f2973fa39d FT: Fix CONFIG_IEEE80211X=y build without CONFIG_FILS=y
remove_ie() was defined within an ifdef CONFIG_FILS block while it is
now needed even without CONFIG_FILS=y. Remove the CONFIG_FILS condition
there.

Fixes 8c41734e5d ("FT: Fix Reassociation Request IEs during FT protocol")
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-03 12:00:26 +02:00
Jouni Malinen
368c9dc0bd The master branch is now used for v2.8 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 22:55:28 +02:00
Jouni Malinen
c2c6c01bb8 Update version to v2.7 and copyright years to include 2018
Also add the ChangeLog entries for both hostapd and wpa_supplicant to
describe main changes between v2.6 and v2.7.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 21:34:59 +02:00
Jouni Malinen
55570efe35 Uncomment CONFIG_LIBNL32=y in defconfig
libnl 3.2 release is much more likely to be used nowadays than the
versions using the older API, so uncomment this in wpa_supplicant and
hostapd defconfig.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 21:34:59 +02:00
Jouni Malinen
e49a7199d5 tests: Opportunistic Wireless Encryption association rejection handling
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 20:42:09 +02:00
Ashok Kumar
698c9e2021 OWE: Try another group only on association rejection with status 77
Do not change the OWE group if association is rejected for any other
reason than WLAN_STATUS_FINITE_CYCLIC_GROUP_NOT_SUPPORTED to avoid
unnecessary latency in cases where the APs reject association, e.g., for
load balancing reasons.

Signed-off-by: Ashok Kumar <aponnaia@codeaurora.org>
2018-12-02 20:42:09 +02:00
Jouni Malinen
8fc6d88465 OWE: Fix association rejection behavior
If association failed for any non-OWE specific reason, the previous
implementation tried to add the OWE related IEs into the (Re)Association
Response frame. This is not needed and could actually result in
dereferencing a NULL pointer. Fix this by adding those OWE related IEs
only for successful association and only if the RSN state machine has
been initialized.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 20:21:21 +02:00
Jouni Malinen
bd51246924 nl80211: Debug print TX queue parameter values and result
Some mac80211_hwsim test cases have failed with mysterious sequence
where mac80211 has claimed the parameters are invalid ("wlan3: invalid
CW_min/CW_max: 9484/40"). Those values look strange since they are not
from hostapd configuration or default values.. hostapd is seeing TX
queue parameter set failing for queues 0, 1, and 3 (but not 2) for these
cases. Add debug prints to hostapd to get more details on what exactly
is happening if such error cases can be reproduced.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 19:50:59 +02:00
Jouni Malinen
d0cd2d1ab2 tests: DPP network addition failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 18:40:06 +02:00
Jouni Malinen
fe7c91f822 tests: DPP and continue listen state
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 18:40:06 +02:00
Jouni Malinen
117f586b05 DPP: Remove unused wpas_dpp_remain_on_channel_cb()
This function was apparently never used at all.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 18:40:06 +02:00
Jouni Malinen
88c08a29a2 tests: DPP_BOOTSTRAP_GEN/REMOVE/GET_URI/INFO error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 18:40:06 +02:00
Jouni Malinen
d0e88871a7 tests: DPP and unknown configurator id
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 18:40:06 +02:00
Jouni Malinen
24c4200d2e tests: DPP and PKEX with local failure in processing Commit Reveal Req
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 18:40:06 +02:00
Jouni Malinen
a7758916c6 tests: DPP and PKEX with local failure in processing Exchange Resp
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 12:44:13 +02:00
Jouni Malinen
6026ed0df1 tests: DPP and PKEX with mismatching curve (local failure)
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 12:39:05 +02:00
Jouni Malinen
eb390abb21 tests: DPP PKEX identifier combinations
Check behavior with valid and invalid identifier combinations.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 12:32:17 +02:00
Jouni Malinen
4a450ba201 DPP: Do not reply to PKEX request with identifier if no local identifier
The reverse case (local identifier configured but no identifier
received) was already covered, but PKEX is not going to complete
successfully if there is any difference in identifier configuration, so
ignore this other case as well. This avoids unnecessary responses to
PKEX requests with identifier from a device that is ready for PKEX in
general, but not for that particular request.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 12:30:11 +02:00
Jouni Malinen
be5e7a0771 tests: SAE and password identifier with FFC
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 11:56:04 +02:00
Jouni Malinen
7e26f1bc89 tests: DPP peer introduction local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 01:22:59 +02:00
Jouni Malinen
5c6c42aa2c tests: DPP peer introduction failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 00:44:42 +02:00
Jouni Malinen
e22c23382f DPP: Apply testing configuration option to signing of own config
Previous implementation had missed this case of setting configurator
parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 00:26:21 +02:00
Jouni Malinen
b856b94395 tests: DPP own config signing failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 00:10:08 +02:00
Jouni Malinen
1ddf1b34fe tests: DPP invalid configurator key
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-01 23:50:24 +02:00
Jouni Malinen
88d4e0baf2 tests: DPP legacy parameters local failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-01 22:02:55 +02:00
Jouni Malinen
392aba4e87 tests: Radio measurement capability with roaming
This verifies that radio measurement capabilities are negotiated
correctly for the reassociation cases with and without FT.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-01 22:02:55 +02:00
Jouni Malinen
8c41734e5d FT: Fix Reassociation Request IEs during FT protocol
The previous implementation ended up replacing all pending IEs prepared
for Association Request frame with the FT specific IEs (RSNE, MDE, FTE)
when going through FT protocol reassociation with the wpa_supplicant
SME. This resulted in dropping all other IEs that might have been
prepared for the association (e.g., Extended Capabilities, RM Enabled
Capabilities, Supported Operating Classes, vendor specific additions).

Fix this by replacing only the known FT specific IEs with the
appropriate values for FT protocol while maintaining other already
prepared elements.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-01 22:02:55 +02:00
Jouni Malinen
4ff7e05951 tests: Do not generate /tmp/hwsim-tests-*.tar.gz in VM case
There is no point in building this tarball in /tmp that is on the
ramdisk of the VM since it will go away when the VM exits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-01 20:30:09 +02:00