Commit Graph

1334 Commits

Author SHA1 Message Date
Jouni Malinen
ca16586afe Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-11-26.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-04 18:59:31 +02:00
Avraham Stern
730a0d16bf nl80211: Always register management frames handler
If registering WMM-AC ADDTS response action frame or WMM-AC DELTS
action frame fails, the management frame handler is not being
registered. This results with a segmentation fault when trying to
unsubscribe the handler when the interface is removed.
Fix it by always registering the handler and just returning a negative
value to note that the action frame could not be registered.

This fixes an issue introduced in the commit
dfa8787833 ('nl80211: Implement
add_ts/del_ts ops').

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-01-04 18:28:03 +02:00
Jouni Malinen
4e8f31e2ef doc: Extend driver.h documentation
This documents some more parts of the driver wrapper interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-03 18:24:20 +02:00
Jouni Malinen
bbd89bfca0 nl80211: Clear nlmsg payload with keys before freeing
This reduces the time possible keys could remain in heap memory. Couple
of the nl80211 messages include keys (TK for normal ciphers and
KCK/KEK/PMK for various offloading cases).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-03 01:15:34 +02:00
Jouni Malinen
f2535da879 nl80211: Note linux_set_iface_flags() failure in debug log
There was one final remaining linux_set_iface_flags() call that did not
check the result. This specific one does not really matter much, but
anyway, be more consistent by checking the result and log any error in
debug log. (CID 74146)

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:56:04 +02:00
Jouni Malinen
49e3eea8d9 Avoid -Wshadow warnings from older gcc versions
It looks like gcc 4.8.2 would warn about these with -Wshadow, but 4.6.3
did.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:21:00 +02:00
Jouni Malinen
a193231dfb Clean up debug prints to use wpa_printf()
This converts most of the remaining perror() and printf() calls from
hostapd and wpa_supplicant to use wpa_printf().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:20:57 +02:00
Jouni Malinen
36f0cf3774 privsep: Fix compilation due to associate() parameter updates
struct wpa_driver_associate_params moved to using struct
hostapd_freq_params instead of just frequency. Need to update wpa_priv
to do same.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
40e7639600 nl80211: Check if_indextoname() return value for bridge events
It would be at least theoretically possible for the bridge netdev to
have disappeared at the time hostapd processes the RTM newlink/dellink
message. As such, it is better to verify that if_indextoname() actually
returned success before printing the bridge ifname in debug. In
addition, there is not much point trying to add the bridge ifindex into
the list of own ifindexes in case the interface has already been
removed, so skip that part as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 19:43:24 +02:00
Jouni Malinen
ce20a3702c nl80211: Remove practically unused process_drv_event()
This was used in the past, but all the event processing is now either
through process_global_event() or process_bss_event().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 16:12:11 +02:00
Masashi Honma
4b4093686b mesh: Make maximum number of peer links configurable
Maximum number of peer links is maximum number of connecting mesh peers
at the same time. This value is 0..255 based on the
dot11MeshNumberOfPeerings range.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:52:31 +02:00
Masashi Honma
9c58c5f72c mesh: Make beacon interval configurable
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:38:20 +02:00
Jouni Malinen
5ef8e39fa7 nl80211: Fix interface-in-different-bridge case
The local ifindex list needs to be updated only if the current bridge
interface is the correct one. If hostapd is going to move the interface
to another bridge, the old bridge ifindex must not be added. In
addition, when removing the bridge interface on deinit, it may need to
be set down to allow bridge removal.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:00:08 +02:00
Jouni Malinen
666e508ccf nl80211: Fix cfg80211 workaround for IBSS join
The interface was incorrectly changed to station mode between the two
IBSS join requests and that made the second attempt fail. Remove that
undesired mode clearing from this special case of IBSS leave sequence.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:35:23 +02:00
Jouni Malinen
533fe09b78 nl80211: Fix no-encrypt for IEEE 802.1X WEP EAPOL
Commit 9f12614b8c ('nl80211: Do not
encrypt IEEE 802.1X WEP EAPOL') tried to use
NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT to disable encryption of EAPOL
frames for WEP IEEE 802.1X. However, it used incorrect key management
suite (IEEE 802.1X with WPA/WPA2 while the non-WPA version is needed
here). Consequently, the no-encrypt flag was never set to the driver
(WPA/WPA2 cases do not meet the WEP as pairwise criteria).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:35:03 +02:00
Jouni Malinen
1033315fbe nl80211: Remove send_and_recv_msgs_global() wrapper
There was only a single user for this and calling send_and_recv()
directly is as simple as using this wrapper.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 15:45:28 +02:00
Jouni Malinen
bdf5ccb264 nl80211: Remove unnecessary function declarations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 15:37:16 +02:00
Masashi Honma
5b78493f3b mesh: Add mesh interface creation command for mesh gate
The mesh gate is used to bridge (or route) between mesh network and
another network. For example, mesh gate acts as router between mesh
network and IEEE 802.11 BSS network.

This command makes a virtual mesh interface to be used for mesh gate.

This command expects to be used like this.

wpa_cli -i wlan0 MESH_INTERFACE_ADD ifname=mesh0
wpa_cli -i mesh0 add_network
wpa_cli -i mesh0 set_network 0 ssid '"commell_2X_mmm"'
wpa_cli -i mesh0 set_network 0 mode 5
wpa_cli -i mesh0 set_network 0 frequency 2412
wpa_cli -i mesh0 set_network 0 key_mgmt SAE
wpa_cli -i mesh0 set_network 0 psk '"01234567"'
wpa_cli -i mesh0 mesh_group_add 0
wpa_cli -i wlan0 mesh_group_remove mesh0

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-14 23:27:43 +02:00
Jörg Krause
33c7eb810a wext: Fix musl build error
Building wpa_supplicant with the musl C library fails since musl does
not define type names such as '__uint32_t'. To support building
wpa_supplicant with the musl C library use the integer types declared in
the ISO C standard header file <stdint.h>.

Signed-off-by: Jörg Krause <jkrause@posteo.de>
2014-12-14 18:05:32 +02:00
Rafał Miłecki
7c4027f604 nl80211: Report new station / assoc event for the correct BSS
drv->ctx always points to the first BSS and we should report event using
BSS related to the interface we got NL80211_CMD_NEW_STATION from.
This fixes STA association for drivers using NL80211_CMD_NEW_STATION and
multiple virtual interfaces.

Before:
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0-1 (ifindex:7)
nl80211: New station 02:00:00:00:01:00
wlan0: STA 02:00:00:00:01:00 IEEE 802.11: associated

After:
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0-1 (ifindex:7)
nl80211: New station 02:00:00:00:01:00
wlan0-1: STA 02:00:00:00:01:00 IEEE 802.11: associated

This is not applicable to the cases where authentication (AP SME & MLME)
is in hostapd and hostapd_assoc_cb() instead of hostapd_notif_assoc()
handles BSS selection.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2014-12-14 17:29:26 +02:00
Jouni Malinen
a0a34d536e nl80211: Add rrm_flags to STATUS-DRIVER
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 21:09:11 +02:00
Jouni Malinen
2961bfa8e1 Remove unused send_eapol() driver op
The send_eapol() callback was used by driver_test.c, but with that
removed, there is no remaining users of the alternative EAPOL frame
transmitting mechanism in wpa_supplicant, i.e., all remaining driver
interfaces use l2_packet instead. Remove the send_eapol() to get rid of
unused code.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:40:07 +02:00
Chet Lanctot
15badebd47 nl80211: Add QCA vendor specific query of device/driver features
This commit introduces a QCA vendor command that allows interrogation of
the vendor-specific features supported by the device/driver. Currently
the only defined feature is the ability to offload key management.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-09 21:08:21 +02:00
Jouni Malinen
1f90dfd2cd nl80211: Add frame control and sequence control field in RX frame debug
This makes it easier to debug issues related to duplicated management
frames on receive path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-09 01:19:20 +02:00
Jouni Malinen
4bd7195466 nl80211: Try to unmask 11b rates again on next connection request
It is possible for unmasking of 11b rates to fail if a P2P group is
terminated while the netdev is down (e.g., due to rfkill block). This
could result in the 11b TX rates being left masked for non-P2P
operations. This would be particularly unfortunate for channel 14 use
since OFDM rates are not allowed on channel 14 and only OFDM rates were
configured P2P. This issue showed up, e.g., when running hwsim test case
rfkill_autogo followed by ap_wps_conf_chan14.

It may be possible to allow the failed operation in cfg80211/mac80211,
but it looks better to work around this on wpa_supplicant side as well.
Try to unmask the 11b rates again on the next connection request if the
rate unmasking operation had failed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-08 16:10:46 +02:00
Jouni Malinen
3e208481b5 nl80211: Add more debug prints for 11b rate disabling and re-enabling
This makes it easier to debug issues related to TX rate masking for P2P
use cases (and unmasking for non-P2P).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-08 16:01:51 +02:00
Jouni Malinen
d85e1fc8a5 Check os_snprintf() result more consistently - automatic 1
This converts os_snprintf() result validation cases to use
os_snprintf_error() where the exact rule used in os_snprintf_error() was
used. These changes were done automatically with spatch using the
following semantic patch:

@@
identifier E1;
expression E2,E3,E4,E5,E6;
statement S1;
@@

(
  E1 = os_snprintf(E2, E3, ...);
|
  int E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else if (E6)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = 0;
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else if (E6) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	E1 = os_snprintf(E2, E3, ...);
  }
)
? os_free(E4);
- if (E1 < 0 || \( E1 >= E3 \| (size_t) E1 >= E3 \| (unsigned int) E1 >= E3 \| E1 >= (int) E3 \))
+ if (os_snprintf_error(E3, E1))
(
  S1
|
{ ... }
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
a80ba67a26 Check os_snprintf() result more consistently - success case
This converts os_snprintf() result validation cases to use
os_snprintf_error() in cases where success condition was used to execute
a step. These changes were done automatically with spatch using the
following semantic patch:

@@
expression E1,E2,E3;
statement S1;
@@

  E1 = os_snprintf(E2, E3, ...);
- if (\( E1 >= 0 \| E1 > 0 \) && \( (size_t) E1 < E3 \| E1 < (int) E3 \| E1 < E3 \))
+ if (!os_snprintf_error(E3, E1))
  S1

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
a9aaacbb50 Check os_snprintf() result more consistently - maximum length
This adds verification of os_snprintf() result against the maximum
buffer length. These changes were done automatically with spatch
using the following semantic patch:

@@
expression E1,E2,E3;
statement S1;
@@

  E1 = os_snprintf(E2, E3, ...);
- if (\( E1 < 0 \| E1 <= 0 \))
+ if (os_snprintf_error(E3, E1))
(
  S1
|
{ ... }
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
8105821b39 Replace send_ft_action() driver_op with send_action()
This reduced number of unnecessarily duplicated driver interface
callback functions for sending Action frames by using the more generic
send_action() instead of FT specific send_ft_action().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 18:13:29 +02:00
Jouni Malinen
477af8f869 nl80211: Move scanning related functionality to a separate file
This helps in making the still overly large driver_nl80211.c somewhat
more manageable.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:59:26 +02:00
Jouni Malinen
3f63614f18 nl80211: Clean up nl80211_scan_common() to use nl80211_cmd_msg()
This helper function had not used the nl80211_set_iface_id() helper, but
there is no reason why it couldn't re-use the same helper as other
places using nl80211_cmd_msg().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:18:51 +02:00
Jouni Malinen
95376e1a99 nl80211: Use nl80211_iface_msg() helper
Use the helper function to replace places that use nlmsg_alloc(),
nl80211_cmd(), and ifindex.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:18:51 +02:00
Jouni Malinen
13f83980f0 nl80211: Use nl80211_bss_msg() helper
Use the helper function to replace places that use nlmsg_alloc(),
nl80211_cmd(), and either bss->ifindex or if_nametoindex(bss->ifname).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:18:46 +02:00
Jouni Malinen
a3249fdfb8 nl80211: Use nl80211_cmd_msg() for P2P Device operations
bss->wdev_id_set is set for the non-detdev P2P Device, so
nl80211_cmd_msg() can be used as-is for these cases as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:17:19 +02:00
Jouni Malinen
9725b78421 nl80211: Use nl80211_drv_msg() helper
Use the helper function to replace places that use nlmsg_alloc(),
nl80211_cmd(), and drv->ifindex.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:17:12 +02:00
Jouni Malinen
350acc354d nl80211: Move nl80211_set_iface_id() next its only remaining user
This function was in a bit strange location between struct family_data
and family_handler() definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 16:41:26 +02:00
Jouni Malinen
56f77852e5 nl80211: Use the new nl80211_cmd_msg() helper
This removes duplicated code for building nl80211 commands for a BSS.
This commit handles the functions that were already using
nl80211_set_iface_id().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 16:41:25 +02:00
Jouni Malinen
07c7757cb1 nl80211: Add nl80211_*_msg() helpers
These new functions can be used to both allocate and build a header for
most nl80211 commands.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 16:41:01 +02:00
Jouni Malinen
a862e4a38f nl80211: Continue getting rid of NLA_PUT* macro use
This gets rid of more NLA_PUT* macro uses in nl80211 to reduce the
number of functions that depend on the hidden behavior of jumping to the
nla_put_failure label.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 12:50:15 +02:00
Jouni Malinen
9589a91e0e nl80211: Get rid of NLA_PUT* macro use in capability checking
This gets rid of NLA_PUT* macro use in checking nl80211 capabilities to
reduce the number of functions that depend on the hidden behavior of
jumping to the nla_put_failure label.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 12:18:38 +02:00
Jithu Jance
0d4e3d1d13 nl80211: Ignore Connect failure for the previous association
Suppose there are two APs (AP1 & AP2) and user attempted to connect to
AP2 before the previous connection with AP1 could succeed. Now, if the
connection event comes for the older AP with failed status, we should
just ignore it as the wpa_supplicant state has moved to "ASSOCIATING"
with the new AP (AP2).

This is a similar to the case where a disconnection event is ignored for
a case where local disconnect request can cause the extra event to show
up during the next association process following that command.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-12-04 00:34:08 +02:00
Peng Xu
16689c7cfc hostapd: Allow ACS to be offloaded to the driver
Using QCA vendor command, allow ACS function to be offloaded to the
driver. Once channels are selected, hostapd is notified to perform OBSS
operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-03 22:31:53 +02:00
Vivek Natarajan
b685e2aab7 atheros: Cleanup atheros_raw_receive to process all management frames
Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com>
2014-12-02 16:20:35 +02:00
Jouni Malinen
0ecff8d7c3 Add hostapd driver_params config parameter
This is mainly for development testing purposes to allow driver_nl80211
behavior to be modified.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-29 13:24:42 +02:00
Jouni Malinen
ebd557288c Remove forgotten driver_test.c variables
hostapd was still providing couple of parameters that were used only in
the already removed driver_test.c framework.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-29 12:49:55 +02:00
Jouni Malinen
bd26031b4b wext: Fix non-WPA/WPA2 connection with extra IEs
The associate() handler was not prepared for params->wpa_ie containing
some other IEs than WPA/RSN IE and ended up configuring security policy
incorrectly for open networks if such IEs were present. Fix this by
using wpa_proto parameter instead of IEs to determine security policy
for driver configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:30 +02:00
Johannes Berg
d306df7919 wext: Add very basic status command support
Just to make the test framework happy, it uses the driver
status command to obtain the interface MAC address.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
f33c82d23e nl80211: Change iftype to station on leaving mesh
This is needed to make following operations behave as expected since
mesh iftypes may prevent various operations (e.g., registering Probe
Request frame RX). Use same design as leave_ibss does to handle this
consistently.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 17:12:47 +02:00
Jouni Malinen
7a94120ea9 nl80211: Clear ignore_if_down_event if interface is up
It was possible for the ignore_if_down_event flag to remain set in some
cases where interface mode change required the interface to be set down
temporarily. If that happened, the following rfkill interface down could
have been ignored and device could have been left trying to scan or
connect (which would all fail due to the interface beign down). Clean
this up by clearing the ignore_if_down_event flag on the interface down
event regardless of whether the interface is up at the time this event
is processed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 14:59:28 +02:00
Jouni Malinen
8997613c90 nl80211: Fix br_ifindex storing when hostapd creates the bridge
Commit 6c6678e7a4 ('nl80211: Make
br_ifindex available in i802_bss') did not cover the case where
i802_check_bridge() ends up creating the bridge interface. That left
bss->br_ifindex zero and prevented neighbor addition. Extend that
functionality to update br_ifindex once the bridge netdev has been
added.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-26 01:16:35 +02:00
Andrei Otcheretianski
7dc0338806 nl80211: Register Link Measurement Request Action frame
Add link measurement request to registration of Action frames to be
handled by wpa_supplicant if the driver supports TX power value
insertation.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-11-22 21:38:30 +02:00
Assaf Krauss
2526ccd95a nl80211: Register Neighbor Report Response Action frame
Add Neighbor Report Response Action frame to registration of Action
frames to be handled by wpa_supplicant.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:16:25 +02:00
Assaf Krauss
58162adf06 nl80211: Populate RRM flags in nl80211 driver
Set the RRM capability flags, based on the capabilities reported
by the underlying driver.

In addition, upon connection, notify the underlying driver regarding
RRM support.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:06:32 +02:00
Assaf Krauss
0dc957b93d driver: Add RRM-related definitions to driver interface
Add definitions for RRM (Radio Resource Measurement) support:
1. Flags that specify the RRM capabilities of the underlying driver
2. Flag for RRM in Capability Info field in Management frames
3. Indication in association parameters regarding an RRM connection

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:05:55 +02:00
Jouni Malinen
e503861f4d nl80211: Do not try to change STA capability on NL80211_CMD_SET_STATION
cfg80211 will reject any of these attributes regardless of whether the
values actually change or not when NL80211_CMD_SET_STATION is used for
something else than TDLS. This path is hit at least when setting up
mesh, so filter out the attributes from NL80211_CMD_SET_STATION to match
the rules in cfg80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-20 16:31:05 +02:00
Kyeyoon Park
ed4ddb6d77 AP: Extend the BSS bridge neighbor entry management to support IPv6
This allows adding/deleting an IPv6 neighbor entry to/from the bridge,
to which the BSS belongs. This commit adds the needed functionality in
driver_nl80211.c for the Linux bridge implementation. In theory, this
could be shared with multiple Linux driver interfaces, but for now, only
the main nl80211 interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:23:38 +02:00
Jouni Malinen
01b24c52df wired: Fix deinit path to unregister eloop read_sock
The previous version was leaving behind registered eloop socket
instances.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-17 00:57:15 +02:00
Moshe Benji
dfa8787833 nl80211: Implement add_ts/del_ts ops
Add ops to notify about TSPECs to add/remove. Additionally, subscribe to
ADDTS/DELTS Action frames to be able to process WMM AC Action frames.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:21:22 +02:00
Moshe Benji
471cd6e10c WMM AC: Add add_tx_ts and del_tx_ts driver ops
Add add_tx_ts() and del_tx_ts() ops to notify the driver about
TSPEC add / delete.

Additionally, add wmm_ac_supported flag to indicate
whether the driver supports WMM AC.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 20:47:36 +02:00
Eliad Peller
7e0e10693a nl80211: Parse WMM parameters on association
Set the relevant WMM parameters in the assoc_data event.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 20:19:04 +02:00
Eliad Peller
0f14a44e6b drivers: Add WMM parameters to association event data
The WMM parameters will be used later for setting default tspec values.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 20:16:58 +02:00
Jouni Malinen
d308d1a899 Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-11-11.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 20:08:00 +02:00
Jason Mobarak
5cfb672dde mesh: Enable mesh HT mode
Add a new option "mesh_ht_mode" that specifies the HT mode for the
mesh, with this option on, mesh beacons, actions frames, and probe
responses with include the appropriate HT information elements.

[original implementation by Chun-Yeow Yeoh <yeohchunyeow@gmail.com>]
[some fixes by Masashi Honma <masashi.honma@gmail.com>]
Signed-off-by: Ashok Nagarajan <ashok.dragon@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
2014-11-16 19:43:11 +02:00
Dmitry Shmidt
88cb27c7a5 hostapd: Add wowlan_triggers config param
New kernels in wiphy_suspend() will call cfg80211_leave_all() that will
eventually end up in cfg80211_stop_ap() unless wowlan_triggers were set.
For now, use the parameters from the station mode as-is. It may be
desirable to extend (or constraint) this in the future for specific AP
mode needs.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-11-16 17:09:11 +02:00
Ilan Peer
f03996565a nl80211: Fix Android compilation by adding include for fcntl.h
This is needed for fcntl() at least with Android KK.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-16 17:09:11 +02:00
Jouni Malinen
666497c8e6 Suite B: Add AKM 00-0F-AC:11
This adds definitions for the 128-bit level Suite B AKM 00-0F-AC:11. The
functionality itself is not yet complete, i.e., this commit only
includes parts to negotiate the new AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 13:20:51 +02:00
Jouni Malinen
68ee1cdca0 Remove unused EVENT_MLME_RX
This was used in driver_test.c, but that driver wrapper has been removed
and there are no remaining or expected users for EVENT_MLME_RX.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 19:31:23 +02:00
Jouni Malinen
0f812c993b Remove unused EVENT_FT_RRB_RX
This was used in hostapd driver_test.c, but that driver wrapper has been
removed and there are no remaining or expected users for
EVENT_FT_RRB_RX.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 19:27:48 +02:00
Jouni Malinen
f21495ad38 madwifi: Remove obsolete madwifi driver interface
The MadWifi project is not active anymore and the last release happened
in early 2008. As such, there is no remaining justification for
maintaining the madwifi-specific driver interface for hostapd either.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 16:15:29 +02:00
Jouni Malinen
10bbe8b8ed nl80211: Fix a copy-paste error in key offload management
Commit b41f26845a ('Add support for
offloading key management operations to the driver') used incorrect
variable for determining the KCK length. This does not get triggered in
normal use cases since KCK and KEK are always included and of the same
length (in currently supported key management cases). Anyway, this needs
to be fixed to check the correct attribute. (CID 74491)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-28 01:41:57 +02:00
Kyeyoon Park
7565752d47 AP: Add support for setting bridge network parameter
This allows setting a network parameter on the bridge that the BSS
belongs to.

This commit adds the needed functionality in driver_nl80211.c for the
Linux bridge implementation. In theory, this could be shared with
multiple Linux driver interfaces, but for now, only the main nl80211
interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
73d2294fbe AP: Add support for setting bridge port attributes
This allows setting a bridge port attribute. Specifically, the bridge
port in this context is the port to which the BSS belongs.

This commit adds the needed functionality in driver_nl80211.c for the
Linux bridge implementation. In theory, this could be shared with
multiple Linux driver interfaces, but for now, only the main nl80211
interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
71103bed42 AP: Add support for IPv4 neighbor entry management to the BSS bridge
This allows adding/deleting an IPv4 neighbor entry to/from the bridge,
to which the BSS belongs. This commit adds the needed functionality in
driver_nl80211.c for the Linux bridge implementation. In theory, this
could be shared with multiple Linux driver interfaces, but for now, only
the main nl80211 interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
6c6678e7a4 nl80211: Make br_ifindex available in i802_bss
Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Jouni Malinen
159a17916f nl80211: Move more event processing into driver_nl80211_event.c
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
8a906d1251 nl80211: Move event handling into a separate file
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
0fafeb5454 nl80211: Move capability determination into a separate file
This moves significant amount of code away from large driver_nl80211.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
906bc4c7d3 nl80211: Move QCA DFS offload capability determination to init time
There is no need to fetch this capability for each get_capa() call.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
981cf85a41 nl80211: Move AP monitor interface handling to a separate file
This moves the old monitor interface design to driver_nl80211_monitor.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
f3407c66c2 nl80211: Make some helper functions non-static
This allows more functionality to be moved to separate files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
70a96c8116 nl80211: Move most of the Android code into a separate file
This moves most of the Android specific implementation from
driver_nl80211.c to driver_nl80211_android.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
1474e6e917 nl80211: Move definitions into separate header files
This is an initial step in starting to split the large driver_nl80211.c
implementation into somewhat smaller parts.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:03:24 +02:00
Jouni Malinen
392dfd37e8 nl80211: Store externally managed bridge name in driver status
This makes it easier to figure out from hostapd control interface
whether an interface had been added to a bridge externally at the time
hostapd interface was enabled or if the interface gets added during
hostapd operations.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 11:27:31 +02:00
Ilan Peer
9bc5cfa338 nl80211: Clear beacon_set when deleting a beacon from deinit_ap()
When a beacon was deleted from the kernel in
wpa_driver_nl80211_deinit_ap(), bss->beacon_set was not cleared so
restarting the AP again was not possible.

Fix this by clearing the variable once the beacon was deleted.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 01:24:03 +03:00
Ilan Peer
ea6bf29ea3 nl80211: Add indoor only and GO concurrent flags
Add the following channel flags:

* INDOOR_ONLY: The channel can be used if and only if there is a clear
  assessment that the device is operating in an indoor environment, i.e.,
  it is AC power.

* CONCURRENT_GO: The channel can be used for instantiating a GO if and
  only if there is an additional station interface that is currently
  connected to an AP on the same channel or on the same U-NII band
  (assuming that the AP is an authorized master).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 01:23:46 +03:00
Ilan Peer
0a44358055 wpa_supplicant: Use the 'no_ir' notation
Use the 'no_ir' notation instead of the 'passive scan' and
'no_ibss' notations to match the earlier change in nl80211.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 01:23:43 +03:00
Thomas Pedersen
476e6bb68d mesh: Add mesh mode config option
Modify network mode to support mode number 5 when CONFIG_MESH is
enabled.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-10-25 17:45:35 +03:00
Bob Copeland
5551bc9cb2 nl80211: Do not try to change supported rates
For mesh mode to work properly, set supported rates only once.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 15:54:57 +03:00
Bob Copeland
7a228b5c3f nl80211: Add STA flag WPA_STA_AUTHENTICATED
This is needed for managing STA entries for mesh use cases.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 15:54:47 +03:00
Bob Copeland
7c7e7877fc nl80211: Add plink_action_field to hostapd_sta_add_params
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 15:54:38 +03:00
Bob Copeland
0d391b03e7 nl80211: Reject deauth/disassoc for mesh interface
sta_info call these to send out the disassoc and deauth frame
which are both not relevent to mesh. So don't send them.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 13:47:48 +03:00
Bob Copeland
afb0550a39 nl80211: Register to receive mesh frames
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 13:47:12 +03:00
Jouni Malinen
aed8d4d1ff nl80211: Write channel type in debug log on channel switch event
This makes it easier to understand what kind of channel switch was
indicated by the driver.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 11:28:56 +03:00
Eliad Peller
da1080d721 nl80211: Advertise and configure SMPS modes
Advertise static/dynamic SMPS mode support (according to the wiphy
feature bits) and pass the configured smps_mode when starting the AP.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-10-24 01:29:08 +03:00
Eliad Peller
8f461b50cf HT: Pass the smps_mode in AP parameters
The driver needs to know what SMPS mode it should use.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-10-24 01:27:31 +03:00
Eliad Peller
04ee647d58 HT: Let the driver advertise its supported SMPS modes for AP mode
Add smps_modes field, and let the driver fill it with its supported SMPS
modes (static/dynamic). This will let us start an AP with specific SMPS
mode (e.g., dynamic) that will allow it to reduce its power usage.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-10-24 01:25:29 +03:00
Chet Lanctot
b41f26845a Add support for offloading key management operations to the driver
This commit introduces a QCA vendor command and event to provide an
option to use extended versions of the nl80211 connect/roam operations
in a way that allows drivers to offload key management operations to the
driver/firmware.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 18:38:50 +03:00
Johannes Berg
97752f7930 Revert "nl80211: Do not indicate P2P_DEVICE support by default"
This reverts commit 851b0c5581.

The kernel now has full support for this (and it is turned off
by default for hwsim) so wpa_supplicant should really go back
to autodetecting this so clients don't have to figure out what
to do.

Also add a debug message stating that P2P_DEVICE support is used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:54:02 +03:00
Bob Copeland
a52024c976 nl80211: Add new peer candidate event for mesh
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
7e31703e4d nl80211: Add support for sta_add flags_mask
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
6c1664f605 nl80211: Add new commands to support mesh interfaces
Create init_mesh, mesh_join, and mesh_leave actions to kernel.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
24bd4e0be5 nl80211: Add driver flag to indicate mesh support
Convert the driver flags variable to u64 since there was no room for
more flags.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Jouni Malinen
54a800dd51 netlink: Fix RTM_SETLINK padding at the end of the message
While the kernel seems to have accepted the message to set linkmode and
operstate without the final attribute getting padded to 32-bit length,
it is better to get this cleaned up to match expected format. The double
NLMSG_ALIGN() followed by RTA_LENGTH() did not make much sense here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 19:27:16 +03:00
Jouni Malinen
3eafc494d8 Fix CONFIG_NO_SCAN_PROCESSING=y build
ht_supported() was used but not defined in such a case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 17:02:23 +03:00
Jouni Malinen
93da049851 nl80211: Be more consistent with linux_set_iface_flags() result
Check the return value and write a debug message if this operation
failes (CID 74146).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 18:43:30 +03:00
Jouni Malinen
01b3bbfc66 test: Remove driver_test.c
The driver_test.c driver wrapper (-Dtest in wpa_supplicant and
driver=test in hostapd) was previously used for testing without real
Wi-Fi hardware. mac80211_hwsim-based tests have practically replaced all
these needs and there has been no improvements or use for driver_test.c
in a long while. Because of this, there has not really been any effort
to maintain this older test tool and no justification to change this
either. Remove the obsoleted test mechanism to clean up the repository.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 17:46:04 +03:00
Jouni Malinen
59d7148ad7 nl80211: Provide subtype and reason code for AP SME drivers
This allows drivers that implement AP SME internally to generate a
Deauthentication or Disassociation frame with the specified reason code.
This was already done with drivers that use hostapd/wpa_supplicant for
AP SME.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 20:05:37 +03:00
Janusz Dziedzic
4ec68377ef wpa_supplicant: Use hostapd_freq_params in assoc_params
Use hostapd_freq_params instead of simple frequency parameter for driver
commands. This is preparation for IBSS configuration to allow use of
HT/VHT in IBSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-10-04 18:43:42 +03:00
Dan Williams
3e0272ca00 nl80211: Re-read MAC address on RTM_NEWLINK
Commit 97279d8d (after hostap-2.0) dropped frame events from foreign
addresses. Unfortunately this commit did not handle the case where the
interface's MAC address might be changed externally, which other
wpa_supplicant code already handled. This causes the driver to reject
any MLME event because the address from the event doesn't match the
stale address in the driver data.

Changing an interface's MAC address requires that the interface be
down, the change made, and then the interface brought back up. This
triggers an RTM_NEWLINK event which driver_nl80211.c can use to
re-read the MAC address of the interface.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-10-04 16:41:20 +03:00
Jouni Malinen
5dfbd725a9 nl80211: Add get_bss_ifindex() helper
This can be used to fetch a BSS entry based on interface index.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 16:21:03 +03:00
Arik Nemtsov
984dadc23a TDLS: Set the initiator during tdls_mgmt operations
Some drivers need to know the initiator of a TDLS connection in order
to generate a correct TDLS mgmt packet. It is used to determine
the link identifier IE. Pass this information to the driver.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2014-10-03 11:52:21 +03:00
Jouni Malinen
01cb5df20c Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-10-02.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-03 11:39:27 +03:00
Ilan Peer
ca3c6b4da7 nl80211: Fix compatibility with older version of libnl
Commit 97ed9a06df ('nl80211: Remove bridge
FDB entry upon sta_remove()') used nl_sock and nl_socket_* functions
which are not compatible with older versions of libnl. Fix this.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-03 11:34:51 +03:00
Kyeyoon Park
97ed9a06df nl80211: Remove bridge FDB entry upon sta_remove()
The FDB entry removal ensures that the traffic destined for a
disassociated station's MAC address is no longer forwarded from the
bridge to the BSS.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-09-29 13:10:13 +03:00
Janusz Dziedzic
dbdc9a1d48 nl80211: Fix memory leak on start radar detection error path
Free nlmsg if failing to start radar detection.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-09-28 11:03:48 +03:00
Janusz Dziedzic
ed8e005973 hostap: nl80211 use nl80211_put_freq_params
Use nl80211_put_freq_params when it possible. Remove
duplicated code.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-09-27 21:47:40 +03:00
Jouni Malinen
fee354c74d nl80211: Add command for changing local MAC address
This can be used to allow wpa_supplicant to control local MAC address
for connections.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 19:11:24 +03:00
Jouni Malinen
b497a21267 nl80211: Ignore auth/assoc events when testing driver-SME
Previously, extra connect/roam events were ignored when user space SME
was used to avoid confusing double events for association. However,
there was no matching code for ignoring auth/assoc events when using
driver SME. Such events would not normally show up since the driver SME
case would not generated them. However, when testing forced connect
command with force_connect_cmd=1 driver param, these events are
indicated.

Ignore the extra events in testing cases to make the hwsim test cases
match more closely the real code path for driver SME. In addition, this
resolves some test case failures where double association event could
end up causing a failure, e.g., when doing PMKSA caching in
pmksa_cache_oppurtunistic_connect.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Dan Williams
7a4a93b959 dbus: Add SignalPoll() method to report current signal properties
Analogous to the control interface's SIGNAL_POLL request.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-09-13 17:21:54 +03:00
Jouni Malinen
0800f9ee6c nl80211: Add roaming policy update using QCA vendor command
This allows updating roaming policy for drivers that select the BSS
internally so that wpa_supplicant (based on bssid parameter
configuration) and the driver remain in sync.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
0ef023e478 Add support for driver command to update roaming policy
The network block bssid parameter can be used to force a specific BSS to
be used for a connection. It is also possible to modify this parameter
during an association. Previously, that did not result in any
notification to the driver which was somewhat problematic with drivers
that take care of BSS selection. Add a new mechanism to allow
wpa_supplicant to provide a driver update if the bssid parameter change
for the current connection modifies roaming policy (roaming
allowed/disallowed within ESS).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
0cd9846c63 nl80211: Print debug info on STA flag changes
This makes it easier to follow how kernel STA flags are managed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 11:25:04 +03:00
Eduardo Abinader
3ee18569f5 nl80211: Register eloop after hs20 action frame
Even when hs20 action frame is unable to be registered,
for whatever reason, it should be possible to register
event handle for received driver messages. This patch also
avoids a segmentation fault, when p2p and hs20 were enabled
and GO NEG was unable to create p2p iface, the destroy eloop
was crashing by reading an invalid handle.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-09-07 19:22:49 +03:00
Jouni Malinen
f2e9083549 nl80211: Add more RTM_NEWLINK/DELLINK debug messages
This makes it easier to figure out what operations are generating each
RTM_DELLINK message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:18:01 +03:00
Jouni Malinen
728ff2f469 nl80211: Fix RTM_DELLINK processing for bridge events
When a netdev is removed from a bridge, RTM_DELLINK message is received
with ifname (IFLA_IFNAME) pointing to the main netdev event though that
netdev is not deleted. This was causing issues with P2P GO interface
getting disabled when the netdev was removed from a bridge. Fix this by
filtering RTM_DELLINK events that are related to the bridge when
indicating interface status changes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:14:07 +03:00
Avinash Patil
b8d87ed296 nl80211: Disable Probe Request reporting for static AP during deinit
Disable Probe Request reporting for statically created AP interfaces
during de-initialization. We will enable it again while starting AP
operations.

Signed-off-by: Avinash Patil <avinashapatil@gmail.com>
2014-08-10 11:22:30 +03:00
Avinash Patil
bf144cf649 nl80211: Do not change iftype for static AP interface
Some devices have limitations which do not allow changing virtual
interface mode from AP to station or vice versa. To work around this,
check if such AP interface is not dynamic. If such an interface is
enumarated, just set ifmode to AP and avoid setting nlmode to default
station mode on deinit.

Signed-off-by: Avinash Patil <avinashapatil@gmail.com>
2014-08-10 11:19:11 +03:00
Jean-Marie Lemetayer
61157afb1c wext: Add signal_poll callback
Add a basic implementation of a signal_poll callback for wext drivers.

Signed-off-by: Jean-Marie Lemetayer <jeanmarie.lemetayer@gmail.com>
2014-08-10 11:07:05 +03:00
Cedric IZOARD
6d00ab0430 nl80211: Ensure nl_preq unregistration on driver deinit
When driver interface is destroyed (via wpa_driver_nl80211_deinit) the
"preq" nl socket isn't always deleted but the callback struct associated
is. After the interface is destroyed we may still get event on the
socket but as the callback has been freed this will cause wpa_supplicant
to crash.

This patch ensures that the "preq" socket is destroyed when destroying
the interface.

Signed-off-by: Cedric IZOARD <cedricx.izoard@intel.com>
2014-07-08 16:01:43 +03:00
Michal Kazior
5841958f26 hostapd: Use channel switch fallback on error
It's worth giving a try to fallback to re-starting BSSes at least once
hoping it works out instead of just leaving BSSes disabled.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2014-06-28 11:13:11 +03:00
Michal Kazior
6782b6846b hostapd: Move CSA parameters to hostapd_data
This prepares CSA structure and logic in hostapd for multi-BSS channel
switching.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2014-06-28 11:02:39 +03:00
Christopher Wiley
3c5d34e30b Change channel before IBSS associations
Fix a bug where changing the mode of the interface to IBSS
fails because the interface is sitting on a channel where IBSS is
disallowed because of a previous association.

Signed-off-by: Christopher Wiley <wiley@chromium.org>
2014-06-28 10:46:33 +03:00
Christopher Wiley
ebffdbc493 nl80211: Refactor mode switch logic
In preparation for another wrinkle around switching into IBSS mode,
refactor existing mode switch logic for simplicity at the expense
of some brevity.

Signed-off-by: Christopher Wiley <wiley@chromium.org>
2014-06-28 10:42:05 +03:00
Pontus Fuchs
f95a4524c2 nl80211: Improve debug output by printing SA and DA in frames
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
2014-06-22 00:54:06 +03:00
Pontus Fuchs
dedfa440ed Print frame type name in debug output
"stype=4" becomes "stype=4 (WLAN_FC_STYPE_PROBE_REQ)" etc.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
2014-06-22 00:51:39 +03:00
Johannes Berg
57a8f8af38 nl80211: Use low-priority scan for OBSS scan
Some drivers may support low-priority scans, if they do then
use that for OBSS scanning.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-22 00:47:06 +03:00
Jithu Jance
d1bb7aeda4 nl80211: Fix non-hostapd interface addition to not call add_ifidx()
Commit b36935be1a ('nl80211: Fix EAPOL
frames not being delivered') and commit
147848ec4d ('nl80211: Do not add all
virtual interfaces to drv->if_indices') were not fully in sync and it
was possible for some non-hostapd use cases to end up adding undesired
ifindexes into the list of interfaces from which events and EAPOL frames
are processed on the parent interface. This could result, e.g., in P2P
Device management interface on getting unexpected events, including
RTM_NEWLINK event that could end up getting interpreted as an
indication of the interface being down and unavailable.

Make both add_ifidx() calls use the same criteria for adding interfaces
to the local list. This is not really a complete solution, but it is
good enough for now to fix the most visible side effects of this issue.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-06-17 01:35:07 +03:00
Jouni Malinen
ac79fcfa76 wext: Verify set_ssid results consistently (CID 62842)
Note in debug log if SSID clearing to stop pending cfg80211 association
attempts fail.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-14 12:32:53 +03:00
Ashok Kumar Ponnaiah
3dacd3ece7 atheros: Add support for new GCMP/CCMP/CMAC/GMAC cipher suites
Extend the set of supported cipher suites to include CCMP-256, GCMP,
GCMP-256, CMAC-256, GMAC, and GMAC-256 when ATH_GCM_SUPPORT=y is set in
the build configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-09 19:21:48 +03:00
Jithu Jance
d3d048310c nl80211: Work around error case prints for nl_recvmsgs on Android
I got the below prints on a particular Android platform:

I/wpa_supplicant( 2637): nl80211: send_and_recv->nl_recvmsgs failed: 20
I/wpa_supplicant( 2637): nl80211: send_and_recv->nl_recvmsgs failed: 20

In JellyBean libnl_2 code, I see that the nl_recvmsgs returns postive values
too. In some cases, nl_recvmgs return the output of nl_recv function. nl_recv
function can return Number of bytes read, 0 or a negative error code.

Looks like this positive return value for nl_recvmsgs may be specific to
Android. While this is not how the API is supposed to work, this does no
harm with upstream libnl which returns only 0 or -1 from the function.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-06-01 11:25:02 +03:00
Michal Kazior
ea39367c1b nl80211: Fix wpa_driver_nl80211_if_add() failure paths
Make sure to not remove interfaces that were not created by
hostapd/wpa_supplicant. This was already done on number of the error
paths, but not all.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2014-05-31 13:43:27 +03:00
Jouni Malinen
147848ec4d nl80211: Do not add all virtual interfaces to drv->if_indices
Commit 04eff7d5ba or something around that
timeframe may have caused a regression on how drv->if_indices gets used
with wpa_supplicant. Most (curretly likely all) wpa_supplicant virtual
interface use cases should not actually use this. This could result in
issues with P2P group interfaces delivering events to incorrect
interface (parent rather than the group interface). The previous commit
removed some of the issues, but more complete fix is to undo some of
those merged hostapd/wpa_supplicant operations.

Filter add_ifidx() uses based on hostapd vs. wpa_supplicant and iftype
to get closer to the earlier wpa_supplicant behavior for the driver
events from virtual interfaces.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 18:47:41 +03:00
Jouni Malinen
de88430311 nl80211: Fix del_ifidx() with mixed parent interface cases
It is possible for a virtual interface to be added and removed by
different parent interfaces. This can happen, e.g., with P2P group
interfaces if the P2P parent interface does not happen to be the first
entry in the wpa_supplicant global interface list. That first entry is
used to remove the group interface while the addition would have
happened with the dedicated P2P management interface.

This can result in the interface that added a new virtual interface
getting stuck with an obsolete ifindex value in the drv->if_indeces list
and as such, deliver some extra events to incorrect destination wpa_s
instance. In particular, this can result in INTERFACE_DISABLED event
from deletion of a P2P group interface getting delivered incorrectly to
the parent wpa_s instance which would disable that interface even though
the interface remains in enabled state.

Fix this by clearing the removed interface from all if_indeces lists
instead of just the one that was used to delete the interface. This is
the simplest approach since the ifindex is unique and there is no need
to track which interface added the new virtual interface to always hit
the same one when removing the interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 18:16:58 +03:00
Jithu Jance
8802326ff9 nl80211: Indicate SHA256-based AKM suites in CONNECT/ASSOCIATE
Previously, the NL80211_ATTR_AKM_SUITES was skipped if either of these
SHA256-based AKMs was negotiated.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-05-21 23:48:00 +03:00
Jouni Malinen
c7caac56b7 nl80211: Fix send_frame freq for IBSS
bss->freq was not updated for IBSS, so whatever old value was stored
from a previous AP mode operation could end up having been used as the
channel when trying to send Authentication frames in an RSN IBSS. This
resulted in the frame not sent (cfg80211 rejects it) and potentially not
being able to re-establish connection due to 4-way handshake failing
with replay counter mismatches. Fix this by learning the operating
channel of the IBSS both when join event is received and when a
management frame is being transmitted since the IBSS may have changed
channels due to merges.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Hu Wang
8d0dd4eebc Add macsec_qca driver wrapper
This is based on driver_wired.c and provides driver interface for the
QCA MACsec driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 20:42:44 +03:00
Hu Wang
7baec808ef MACsec: Add driver_ops
This defines new driver_ops to be used with MACsec.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 20:05:28 +03:00
Chandrasekaran, Manishekar
ea40a575ae nl80211: Use max associated STAs information in AP mode
Propagate max associated STAs in AP mode advertised by the driver to
core wpa_supplicant implemantion. This allows wpa_supplicant to update
the P2P GO group limit information automatically without having to
configure this limit manually. The information (if available) is also
used in the generic AP implementation to control maximum number of STA
entries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 17:12:19 +03:00
Eliad Peller
e4fa8b120b wpa_supplicant: Add Wake-on-WLAN configuration support
Add a new wowlan_triggers option to wpa_supplicant.conf. The triggers in
this key will be used to configure the kernel wowlan configuration.

For now, support only simple flags. More complex triggers can be added
later on.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-04-29 18:59:12 +03:00