Commit Graph

2643 Commits

Author SHA1 Message Date
Jouni Malinen
ecd07de40c tests: EAP-FAST and different TLS cipher suites
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-31 20:53:43 +02:00
Jouni Malinen
9353f07f3b tests: Clear BSS table at the end of rsn_ie_proto_eap_sta
rsn_ie_proto_eap_sta followed by eap_ttls_mschapv2_session_resumption
showed a failure case where the special RSNE from rsn_ie_proto_eap_sta
ended up remaining in a wpa_supplicant BSS entry and the SELECT_NETWORK
command used the previous scan results without checking for changed AP
configuration. This resulted in test failure due to RSN IE being claimed
to be different in EAPOL-Key msg 3/4. This is not really a real world
issue, but try to avoid false failure reports by explicitly clearing the
BSS table at the end of rsn_ie_proto_eap_sta.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-31 00:53:20 +02:00
Jouni Malinen
700c5d0b16 tests: P2P_LISTEN immediately followed by P2P_FIND
This verifies that the previous commit works correctly by forcing a
P2P_LISTEN command execution to be interupted by a P2P_FIND command
timed in a manner that forces it to show up before the kernel ROC has
started for the Listen.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-31 00:37:45 +02:00
Jouni Malinen
ce43836965 tests: GO Negotiation stopped after TX start
This verifies that P2P_STOP_FIND stops a pending offchannel TX wait in
the kernel by checking that a listen operation can be started in less
than a second after stopping a pending Action frame TX. This verifies
that the optimization introduced in the previous commit works properly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-31 00:06:06 +02:00
Jouni Malinen
56dfb604a4 Revert "tests: vm: Output everything on console"
This reverts commit be9fe3d8af. While I
did manage to complete multiple test runs without failures, it looks
like this change increases full test run duration by about 30 seconds
when using seven VMs. The most visible reason for that seems to be in
"breaking" active scanning quite frequently with the Probe Response
frame coming out about 40 ms (or more) after the Probe Request frame
which is long enough for the station to already have left the channel.

Since this logging change is not critical, it is simplest to revert it
for now rather than make changes to huge number of test cases to allow
more scan attempts to be performed before timing out.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-30 21:51:52 +02:00
Jouni Malinen
412c60309a tests: Increase connection timeout for number of EAP test cases
The previously used 10 second timeout allowed only two scan attempts
(five seconds between scans) and it was possible to hit a failure every
now and then when running under heavy load and the Probe Response frame
got delayed by 40 ms or so twice in a row. Add more time for one more
scan attempt to reduce the likelihood of this happening.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 20:00:01 +02:00
Jouni Malinen
96425ea502 tests: Make scan test cases more robust by allowing retries
These test caases depended on a single active scan round finding the AP.
It is possible for the Probe Response frame to get delayed sufficiently
to miss the response especially when testing under heavy load with
multiple parallel VMs. Allow couple of scan retries to avoid reporting
failures from these test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 19:52:42 +02:00
Jouni Malinen
dd4feaad2a tests: Make P2PS join-a-group cases more robust
Use the group SSID (if known) when requesting a join operation. This
makes some of the P2PS test cases more robust in cases where previously
executed tests have added older groups into the cached scan results with
the same MAC addresses and an incorrect BSS could have been picked
previously.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 19:14:40 +02:00
Jouni Malinen
8fb84690ae tests: Dump control interface sockets during FST operations
This makes it less likely to hit issues with running out of control
interface TX queue when running multiple FST test in a row. Number of
the FST operation sequences seemed to leave quite a few event messages
pending in one of the attached control interface sockets for wlan5 which
could result in test failure if the buffer space ran out and some of the
wpa_supplicant events were not delivered.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 13:54:18 +02:00
Jouni Malinen
4bc2ffaaf8 tests: Use logger.info() instead of print in FST test cases
It is better to get these messages into the actual debug log instead of
hoping they will be noticed from stdout.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 13:40:58 +02:00
Jouni Malinen
dafe0b6429 tests: Clean up at the end of connect_cmd_disconnect_event
This test case used to leave the dynamically added wlan5 interface in a
state where it was still trying to reconnect to a network. This could
result in the following test cases being unable to clear the cfg80211
scan cache. Avoid this type of issues by explicitly stopping the
connection attempt and making sure that there are no scan results in the
cache at the end of connect_cmd_disconnect_event.

The following test case sequence triggered a failure due to the
remaining BSS table entry:
connect_cmd_disconnect_event connect_cmd_wep ap_hs20_random_mac_addr

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 13:29:32 +02:00
Jouni Malinen
b90b3eab1f tests: Clear ignore_old_scan_res explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:48:01 +02:00
Jouni Malinen
49d51a0dcb tests: Clear p2p_pref_chan explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:43:46 +02:00
Jouni Malinen
db3070d289 tests: Clear p2p_go_intent explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:40:25 +02:00
Jouni Malinen
cf3a9d8f06 tests: Clear p2p_add_cli_chan explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:33:17 +02:00
Jouni Malinen
721ec02da5 tests: Clear p2p_no_go_freq explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:33:09 +02:00
Jouni Malinen
161c8515cc tests: Make ap_wps_probe_req_ie_oom more robust
It was possible to hit a race condition between WPS_CANCEL and
immediately following WPS_PIN command. Wait for a disconnection event to
avoid that. This was seen with the following test case sequence:
ap_wpa2_psk_supp_proto_wrong_group_key_len ap_wps_probe_req_ie_oom

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:21:08 +02:00
Jouni Malinen
33dfdcbae7 tests: wpa_supplicant AP mode with ACS
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 22:24:05 +02:00
Johannes Berg
be9fe3d8af tests: vm: Output everything on console
When running tests, make printk put all messages, including debug
messages, onto the serial console to go into the console file.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-24 21:27:24 +02:00
Jouni Malinen
0c8eacd1ab tests: EAP-TNC protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 19:16:15 +02:00
Jouni Malinen
e85bb01998 tests: Move P2P-REMOVE-AND-REFORM-GROUP cases more robust
Wait for the AP-DISABLED and AP-ENABLED group events before reading the
current group operation frequency after P2P-REMOVE-AND-REFORM-GROUP.
This reduces a possibility of a race condition making a test case fail
with the returned frequency being 0 when reading this before the
reformed group is fully up. This may help avoid false error reports for
the following test cases: p2p_go_move_reg_change p2p_go_move_scm
p2p_go_move_scm_peer_supports p2p_go_move_scm_multi.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 13:40:54 +02:00
Jouni Malinen
44f4394296 tests: RADIUS Accounting and non-ASCII SSID
This shows an example of Called-Station-Id in Access-Request and
Accounting-Request with non-ASCII characters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 12:19:41 +02:00
Jouni Malinen
52811b8c90 tests: EAP-TLS with intermediate CAs and OCSP multi
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-24 00:54:30 +02:00
Jouni Malinen
98d125cafa tests: Minimal testing of OCSP stapling with ocsp_multi
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-23 00:32:52 +02:00
Jouni Malinen
8adce07a73 tests: Add dh_file parameter for integrated EAP server
This is needed for number of EAP test cases at least when using the
internal TLS server implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-22 17:51:54 +02:00
Jouni Malinen
3b6f3b37b8 tests: WPA2-Enterprise connection using EAP-EKE (many connections)
This tries to make it more likely to hit the special case of pub_len <
prime_len for additional code coverage.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-21 23:57:16 +02:00
Jouni Malinen
2fd377dea1 tests: EAP protocol tests with expanded header
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-21 23:31:15 +02:00
Jouni Malinen
47eac38a63 tests: Add AP Location Public Identifier into gas_anqp_extra_elements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-21 11:56:56 +02:00
Jouni Malinen
f2dfb1dafa tests: GAS fragmentation and comeback delay
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
70f2a3f4ab tests: GAS fragmentation with mac80211_hwsim MCC enabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
35c146bc1b tests: Update gas_anqp_oom_hapd to match new implementation
Since wpa_supplicant is now retrying GAS comeback failures once, the
gas_anqp_oom_hapd test case started failing. Fix this by updating the
test case to expect success (on the retry).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
f9a9304479 tests: Modify gas_malformed_comeback_resp to allow GAS retries
This is in preparation of a wpa_supplicant change to allow GAS retries
which can result in the previous test case design showing failures due
to "unexpected" management frames (GAS Initial Request from the retry).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
d5f5d260b8 tests: EAP-PEAP phase1 TLS flags
This adds some more test coverage for phase1 parameters that had not
previously been included in any of the test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:36:51 +02:00
Jouni Malinen
5382712518 tests: EAP-TTLS with unsupported Phase 2 EAP method in configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:33:03 +02:00
Jouni Malinen
7cb27f89f2 tests: EAP-TLS and TLS Message Length in unfragmented packets
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
cef42a44e2 tests: EAP-TLS and config blob missing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
02b4fb4057 tests: Speed up TNC test cases with the use of a single channel scan
There is no need for these test cases to run a full scan.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
7789070b95 tests: TNC PEAP-SoH local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
212d6a1732 tests: TNC TTLS local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
7c7234a583 tests: Fix scan result clearing in ssid_hidden*
These test cases were supposed to clear the cfg80211 and wpa_supplicant
scan caches in the end to avoid causing issues to the following test
cases. This did not work properly after introduction of the support for
aborting a pending scan. Fix this by using the flush_scan_cache()
function and waiting within the test case until the final scan operation
completes.

This issue was triggered by ssid_hidden/ssid_hidden2 followed by
ext_password_interworking (though, not every time).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
bfdb90d40f tests: EAP-TTLS/MSCHAP with password hash
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
c44e499463 tests: EAP-TTLS local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
a551da6aae tests: EAP-PEAP local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 21:31:17 +02:00
Jouni Malinen
09a4404a33 tests: EAP-PEAP version forcing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:59:14 +02:00
Jouni Malinen
81e1ab85bc tests: EAP-PEAP session resumption with crypto binding
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:23:51 +02:00
Jouni Malinen
09ad98c58a tests: EAP-PEAP with peap_outer_success=0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:05:50 +02:00
Jouni Malinen
446dd7486c tests: REQ_HS20_ICON and DEL_HS20_ICON
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-19 18:34:01 +02:00
Ilan Peer
2e99239bd9 tests: Add rfkill tests for P2P Device operations
Add a couple of tests for rfkill with P2P Device operations
(with and without P2P Device interface).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-18 22:26:18 +02:00
Jouni Malinen
9f052d805d tests: Prepare ap_open_out_of_memory for modified rfkill init path
The rfkill initialization will be moved out from
wpa_driver_nl80211_drv_init() which would break one step in this OOM
test case due to the memory allocation not existing anymore. Fix this by
skipping that OOM step to avoid causing false failures with the
following commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 22:26:18 +02:00
Jouni Malinen
27f6b03115 tests: wpa_supplicant SIGNAL_MONITOR command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 21:02:37 +02:00
Jouni Malinen
6e9554e307 tests: Detect invitation GO issues more quickly
This speeds up and clarifies error reporting for cases where the GO
fails to start in invitation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-18 16:14:55 +02:00
Johannes Berg
05736da8c6 tests: vm: Honor EPATH in uevent.sh
This is useful for testing CRDA since it means you can use EPATH to
redirect the test scripts to a different crda binary.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-18 00:24:51 +02:00
Jouni Malinen
c4e06b9b7b tests: EAP-TTLS with invalid phase2 parameter values
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 00:24:51 +02:00
Jouni Malinen
d386a9ace8 tests: TDLS with VHT 80, 80+80, and 160
This adds more coverage for TDLS testing for a case where the direct
link should use various VHT channel bandwidths.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
7e40a8812b tests: Verify SIGNAL_POLL values in ap_vht80
This confirms that the station recognized and negotiated 80 MHz
channel use with VHT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
138903f91f tests: Run OCSP test cases with internal TLS library
There is no sufficient OCSP support to go through these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-17 21:19:59 +02:00
Jouni Malinen
58a406202a tests: OCSP certificate signed OCSP response using key ID
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-17 00:49:26 +02:00
Jouni Malinen
8e416cecdb tests: Make key-lifetime-in-memory more robust for GTK check
The decrypted copy of a GTK from EAPOL-Key is cleared from memory only
after having sent out CTRL-EVENT-CONNECTED. As such, there was a race
condition on the test case reading the wpa_supplicant process memory
after the connection. This was unlikely to occur due to the one second
sleep, but even with that, it would be at least theorically possible to
hit this race under heavy load (e.g., when using large number of VMs to
run parallel testing). Avoid this by running a PING command to make sure
wpa_supplicant has returned to eloop before reading the process memory.
This should make it less likely to report false positives on GTK being
found in memory.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-14 17:23:47 +02:00
Jouni Malinen
f089cdf98e tests: Add more memory details on key-lifetime-in-memory
This makes it easier to see where in memory the key was found and what
there is in memory around that location.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-14 15:49:01 +02:00
Jouni Malinen
16c43d2a8f tests: Run PKCS#12 tests with internal TLS crypto
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-14 15:49:01 +02:00
Jouni Malinen
ca27ee0998 tests: External server certificate chain validation
This tests tls_ext_cert_check=1 behavior with EAP-TLS, EAP-TTLS,
EAP-PEAP, and EAP-FAST.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-13 21:12:20 +02:00
Jouni Malinen
be90370bd5 tests: Fix wpas_ctrl_country and dbus_country with valid db.txt
init=CORE was previously used due to invalid db.txt data for 00. For
now, allow both it and the new init=USER after fixed db.txt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 12:45:30 +02:00
Jouni Malinen
5b7784a89c tests: EAP-FAST local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 12:42:44 +02:00
Jouni Malinen
1025603b3f tests: FT PTK rekeying triggered by AP/station after roam
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-10 00:14:36 +02:00
Jouni Malinen
cc02fd3eff tests: Make pmksa_cache_opportunistic_connect more robust
This test case could fail if the cfg80211 scan cache brought in a BSS
entry from an earlier test case and a new scan did not get executed
prior to the ROAM command. Fix this by forcing the scan to go through
prior to roaming to AP2

This issue showed up with the following test case sequence:
connect_cmd_roam pmksa_cache_opportunistic_connect

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 20:31:18 +02:00
Jouni Malinen
0ceff76e7b tests: WPA2 AP processing of RSN IE differences
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 20:00:10 +02:00
Jouni Malinen
8eb45bde38 tests: Write GTK locations into debug log in key_lifetime_in_memory
It looks like it is possible for the GTK to be found from memory every
now and then. This makes these test cases fail. Write the memory
addresses in which the GTK was found to the log to make it somewhat
easier to try to figure out where the key can be left in memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 17:48:43 +02:00
Jouni Malinen
1d32bc2c1c tests: Make dbus_wps_oom more robust
It was possible for the BSSs object property change signal to be
generated during the OOM test case for Get(). If that happened, the
signal was not sent out, but the following Get(BSSs) operation succeeded
unexpectedly which resulted in a test failure. Make this less likely to
happen by waiting 50 ms between the scan and Get(BSSs) operation. This
should be sufficient to cover most cases since wpa_supplicant uses 5 ms
timeout for D-Bus property changed updates.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 17:10:06 +02:00
Jouni Malinen
bc321e1597 tests: Make ap_max_num_sta_no_probe_resp more robust
It was possible for the AP's Beacon frame to be seen by dev[0] when
running a scan. This is not an error case. Make this test case more
robust by verifying with a sniffer whether a Probe Response frame was
sent to unexpected STA.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 13:38:18 +02:00
Jouni Malinen
ce96e65cb7 tests: D-Bus vendor element operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:50:41 +02:00
Jouni Malinen
b4e1e99577 tests: EAP-PSK local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 11:13:12 +02:00
Jouni Malinen
4073ef22ae tests: EAP-IKEv2 local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 00:39:27 +02:00
Jouni Malinen
d1341917ce tests: WPS and fragment ack OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 21:35:45 +02:00
Jouni Malinen
96bf8fe104 tests: PKCS #8 private key with PKCS #5 v1.5 and v2.0 format
This verifies client private key use in encrypted PKCS #8 format with
PKCS #5 v1.5 format using pbeWithMD5AndDES-CBC and PKCS #5 v2.0 format
using PBES2 with des-ede3-cbc.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 20:27:27 +02:00
Jouni Malinen
b134397b11 tests: P2P persistent group formation, re-invocation, and cancel
Verify that P2P_CANCEL gets rejected on fully re-invoked persistent
group. This did not work properly before the last couple of commits and
before this week, the P2P_CANCEL on a separate group interface in P2p
Client role could result in use of freed memory and process termination.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 23:15:11 +02:00
Jouni Malinen
f98b0e5806 tests: Make tests using multi_check() more robust
It was possible for a cached scan entry in cfg80211 from an earlier test
case to show up while verifying that the disabled AP does not show up in
scan results. This could result in invalid test failures, e.g., when
running test cases "ap_require_ht ap_multi_bss_config" multiple times
(depends a bit on timing). Make this less likely to occur by explicitly
clearing the scan cache and by stopping wlan1 from trying to associate
before stopping ap_required_ht* test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 21:03:43 +02:00
Jouni Malinen
d887ed3f95 tests: Fix ap_wps_er_multi_add_enrollee cleanup steps
Only one of the ERs was stopped at the end of the test case and this
could result in the following test case failing, e.g., when executing
this test case sequence: ap_wps_er_multi_add_enrollee ap_wps_upnp.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 18:19:39 +02:00
Jouni Malinen
2c68ae2b21 tests: Remove forgotten print from gas_anqp_oom_hapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 13:32:59 +02:00
Jouni Malinen
be4a0d0d5a tests: Make autogo_join_auto_go_neg more robust
It was possible for this test case to fail if the single attempt of
discovering the peer as part of the scan for join failed. This test case
was useful in combination with another test case:
ap_hs20_fetch_osu autogo_join_auto_go_neg

However, there is now an explicit test case (discovery_after_gas) for
this, so autogo_join_auto_go_neg can be made more robust without losing
testing coverage.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:12 +02:00
Jouni Malinen
3bba9c71c5 tests: P2P device discovery after fragmented GAS/ANQP exchange
This verifies cfg80211/mac80211 offchannel TX cancellation steps.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:12 +02:00
Jouni Malinen
850e054c0f tests: EAP-EKE local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-01 01:09:28 +02:00
Jouni Malinen
34b164dd25 tests: Fix p2p_go_move_scm_peer_does_not_support to clear avoid freqs
The P2P channel list on dev[1] at the end of
p2p_go_move_scm_peer_does_not_support was empty because all of the 2.4
GHz band got disabled by the simulated avoid frequencies driver event.
That channel list needs to be cleared prior to resetting regulatory
domain back to world roaming to get the P2P channel list updated
properly for the following test cases.

This was triggered by the following test case sequence:
p2p_go_move_scm_peer_does_not_support persistent_group_and_role_change

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 22:06:54 +02:00
Jouni Malinen
53b2100a3f tests: P2P group formation timeout with cfg80211 P2P Device
Verify that both the GO and P2P Client processing of P2P group formation
timeout removes the correct group.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 21:38:23 +02:00
Jouni Malinen
5549bead85 Revert "tests: Dynamic hwsim p2ps_channel_active_go_and_station_different_mcc"
This reverts commit 78fdab307e. This test
case needs MCC support on two stations, so the earlier attempt to handle
this with one dynamic interface is not sufficient.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-30 19:58:07 +02:00
Jouni Malinen
45e8a45bb5 tests: Show vm-run.sh command line for re-running failure sequences
Now that vm-run.sh supports a long list of test cases without crashing
the VM kernel, there is no need to use the "parallel-vm.py -1 1 <tests>"
workaround. Print the re-run example commands with vm-run.sh instead. In
addition, add the --long argument if it was specified for the test run
to avoid skipping test cases in the re-run case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 19:42:56 +02:00
Jouni Malinen
6a5f578cac tests: Force concurrent exchange in ap_wps_er_multi_add_enrollee
This makes it more likely for the two ERs to go through WPS UPnP
exchange in parallel. This was already happening every now and then and
resulted in failures. However, now that there is support for multiple
concurrent exchanges, it is useful to have this test case hit that
possibility more frequently.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 16:58:47 +02:00
Jouni Malinen
c00f19061c tests: wpa_supplicant sched_scan_plans parsing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 14:03:29 +02:00
Johannes Berg
23fcfd6004 tests: Allow passing more arguments to vm-run.sh
The script is currently limited by the maximum kernel command line
length and if that's exceeded the kernel panics at boot. Fix this by
writing the arguments to a file and reading it in the VM.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-30 14:03:28 +02:00
Jouni Malinen
f0154bf434 tests: Extend scan_dfs to cover US-disallowed channels 12 and 13
Verify that active scanning is not used in US regulatory domain on 2.4
GHz channels 12 and 13.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 14:03:23 +02:00
Jouni Malinen
d6ba709aa3 tests: EAP-TLS with SHA512/SHA384 signature
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-30 00:39:38 +02:00
Jouni Malinen
cc71035f6c tests: ap_wpa2_eap_fast_prf_oom with internal TLS implementation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 23:57:39 +02:00
Jouni Malinen
404597e630 tests: Skip ap_wpa2_eap_ttls_dh_params_dsa with internal TLS
DH DSA parameters are not yet supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 21:09:44 +02:00
Jouni Malinen
686eee77d2 tests: Skip PKCS#12 tests with internal TLS client implementation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 21:07:39 +02:00
Jouni Malinen
089e7ca372 tests: Skip dbus_connect_eap if altsubject_match is not supported
This test case fails with the current internal TLS client implementation
since the needed altsubject_match parameter is not yet supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:57:26 +02:00
Jouni Malinen
c5ef7bbfa5 tests: Fix wpas_ctrl_oom with the internal TLS implementation
One of the OOM cases does not apply for internal crypto implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:43:44 +02:00
Jouni Malinen
c675f669c3 tests: Fix wpas_ctrl_network without SAE
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:38:34 +02:00
Jouni Malinen
e78eb40442 tests: Skip domain_match and domain_suffix_match with internal TLS
The internal TLS client in wpa_supplicant does not yet support the
functionality needed for these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:35:05 +02:00
Jouni Malinen
2286578fe0 tests: TLS v1.2 check in ap_wpa2_eap_tls_versions for internal TLS
The internal TLS implementation in wpa_supplicant supports TLS v1.2, so
verify that this version can be disabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:04:26 +02:00
Jouni Malinen
bb0a72ab46 tests: Skip OCSP test cases with the internal TLS implementation
The internal TLS client implementation does not yet support OCSP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 19:32:45 +02:00
Jouni Malinen
0fc1b583e2 tests: ap_wpa2_eap_ttls_server_cert_hash with internal TLS client
Since the internal TLS client implementation in wpa_supplicant now has
sufficient support for this functionality, allow the test case to be
executed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 19:02:04 +02:00
Jouni Malinen
9b35afd6ac tests: Fix OOM eloop_register_sock() test cases with new gcc
gcc 4.8 vs 5.2 seem to compile eloop_register_sock() differently. With
5.2, that function name does not show up in the backtrace since
eloop_sock_table_add_sock() is used without a separate function call.
This broke the memory allocation failure checking in this test case. Fix
this by matching against the eloop_sock_table_add_sock() function which
shows up in the backtrace for both gcc versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 20:48:16 +02:00
Jouni Malinen
d36ae37679 tests: EAP-SIM/AKA/AKA' error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 20:46:36 +02:00
Jouni Malinen
288b6f8b85 tests: Extended coverage for the EAP-SAKE attribute parser
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 12:25:22 +02:00
Jouni Malinen
ab4ea0e948 tests: EAP-SAKE local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 11:53:31 +02:00
Jouni Malinen
c49b383f45 tests: Convert eap_proto_sake to use newer design
This makes it more convenient to extend the test case with new
message exchanges.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 11:22:21 +02:00
Jouni Malinen
6f2252614c tests: Fix error message for ap_open_out_of_memory
If hostapd AP started unexpectedly, this test case would fail with
NameError due to incorrect variable name being used to construct the
exception text.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 00:23:35 +02:00
Johannes Berg
1a4f18d8f4 tests: run-tests: Print more details about NameError
If encountering a NameError, print the entire traceback so that
it's actually debuggable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-28 00:21:20 +02:00
Jouni Malinen
b6f17f2f5c tests: ERP protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 00:18:49 +02:00
Jouni Malinen
12fff543b3 tests: Enable 802.11ac support in example wpa_supplicant config
This is needed for proper test execution. The recently added VHT 80+80
test cases started verifying channel bandwidth on the station side and
those checks fail if wpa_supplicant is built without
CONFIG_IEEE80211AC=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 21:11:53 +02:00
Johannes Berg
680ce356c0 tests: Honor HWSIM_TEST_LOG_DIR variable in VM runs
If /tmp has a relatively small size limit, or multiple people run the
tests on the same machine, using the same output directory can easily
cause problems.

Make the test framework honor the new HWSIM_TEST_LOG_DIR environment
variable to make it easier to avoid those problems.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-27 21:11:53 +02:00
Johannes Berg
10a15590f8 tests: Add a simple wmediumd test
If wmediumd is available on the path, test that it can forward
packets between two virtual nodes and that stopping it makes
the regular in-kernel datapath do the needed work again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-27 21:11:53 +02:00
Jouni Malinen
f6c09bf46e tests: Remove HwsimSkip from p2p_channel
With the optimizations from the previous commits, none of the test cases
here need to be skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:38:17 +02:00
Jouni Malinen
858d12f69a tests: Optimize p2p_go_move_active initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:37:35 +02:00
Jouni Malinen
ae248721f4 tests: Optimize p2p_go_move_reg_change initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:35:51 +02:00
Jouni Malinen
63b87a5aeb tests: Optimize p2p_go_move_scm_multi initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:31:44 +02:00
Jouni Malinen
3acf68feb9 tests: Convert p2p_go_move_scm_multi to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:30:02 +02:00
Jouni Malinen
d18df681b0 tests: Convert p2p_go_move_scm_peer_does_not_support to dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

In addition, remove dependency on --long since this test case does not
really take that long.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:27:25 +02:00
Jouni Malinen
f0b39e057a tests: Convert p2p_go_move_scm_peer_supports to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

In addition, remove dependency on --long since this test case does not
really take that long (just couple of seconds).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:24:33 +02:00
Jouni Malinen
b98445f6ba tests: Optimize p2p_go_move_scm initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:22:30 +02:00
Jouni Malinen
262825e896 tests: Convert p2p_go_move_scm to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:14:38 +02:00
Jouni Malinen
1002684e11 tests: Convert p2p_go_move_active to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:11:27 +02:00
Jouni Malinen
78fdab307e tests: Dynamic hwsim p2ps_channel_active_go_and_station_different_mcc
Convert p2ps_channel_active_go_and_station_different_mcc to use a
dynamically added HWSimRadio to allow the MCC case to be covered with a
single test run with the mac80211_hwsim default radios disabling MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:01:10 +02:00
Jouni Malinen
d2e7cfc0bd tests: Use wlantest without capture file write buffering
This makes the run_tshark() operations more reliable while still
allowing to reduce the extra wait by forcing wlantest to flush the
packets to the pcapng file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 00:12:38 +02:00
Jouni Malinen
b25f04d44a tests: Clean up frequency list in scan_dfs
This makes the test log more readable by converting the values to
integers and sorting the array.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 23:42:30 +02:00
Jouni Malinen
3960585785 tests: VHT with 80 MHz channel width and local power constraint
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 20:41:55 +02:00
Jouni Malinen
7767687109 tests: Abort scan
This verifies the nl80211 behavior to abort a scan on an explicit
control interface request and on connection request.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 19:44:14 +02:00
Jouni Malinen
f9bf222552 tests: Scan on DFS channels
This is a test case for mac80211 behavior regarding active scanning on
DFS channels.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 19:24:25 +02:00
Jouni Malinen
a74a1e4eab tests: Open mesh network on VHT 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 18:47:40 +02:00
Jouni Malinen
13f6ef9c79 tests: IBSS on VHT 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 18:47:40 +02:00
Jouni Malinen
05032725e1 tests: P2P client joining a group before having found GO Device Address
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 15:17:36 +02:00
Jouni Malinen
bcf4e38c5f tests: AP with open mode and REASSOCIATE not finding a match
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 12:23:19 +02:00
Jouni Malinen
35b61a496a tests: Verify P2P group formation with 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-25 22:43:38 +02:00
Jouni Malinen
08e47376ec tests: Import p2p_utils instead of functions from old locations
These couple of files were forgotten when moving P2P helper functions
into the new p2p_utils.py file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-25 15:47:16 +02:00
Johannes Berg
f2a438f51d tests: Print test name to kernel log buffer
Print the test name to the kernel log buffer so debugging
cross-test issues becomes easier.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-24 16:28:24 +02:00
Anton Nayshtut
81822ce688 tests: Make FST tests aware of unconditional station's MB IE exposure
This syncs the test cases with the implementation change in station's MB
IE creation. FST tests should expect MB IE regardless of the station
connection state and whether the current connection is FST-enabled or
not. This fixes the follow test cases that started reporting failures
with the previous commit change in src/fst/fst_group.c:
fst_disconnect_1_of_2_stas_from_non_fst_ap
fst_sta_connect_to_non_fst_ap
fst_second_sta_connect_to_non_fst_ap
fst_disconnect_2_of_2_stas_from_non_fst_ap
fst_second_sta_connect_to_fst_ap
fst_disconnect_1_of_2_stas_from_fst_ap

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-23 20:36:54 +02:00
Ilan Peer
edb63af6ba tests: Test no P2P GO move when invitation is in progress
Add a test to verify that a P2P GO does not start a CSA
once invitation signalling is done, and the P2P client is
about to connect.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-11-22 22:16:32 +02:00
Jouni Malinen
845d48c133 tests: Make dbus_p2p_group_idle_timeout more robust
This test case was failing if a PropertiesChanged signal for P2P peer
gets delivered from a previous test case. Avoid that by waiting for the
new group to be formed before processing any PropertiesChanged signals.

This failure was triggered by the following test case sequence:
dbus_p2p_two_groups dbus_p2p_group_idle_timeout

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-22 21:28:49 +02:00
Jouni Malinen
e1246a6e2c tests: Make ap_open_select_twice less likely to fail
It looks like a previous P2P test case can cause the initial single
channel scan in ap_open_select_twice take more than five seconds in some
cases. While that is not really expected behavior, this test case should
not fail. Increase the timeout to avoid reporting false failures here.

This could be triggered with the following test case sequence:
p2p_msg_unexpected_go_neg_resp ap_open_select_twice

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-22 20:14:06 +02:00
Jouni Malinen
05bc2b44c1 tests: INTERFACE_ADD create testing coverage
This covers an invalid interface type and interface type 'sta'.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-22 17:59:54 +02:00
Ilan Peer
061190308d tests: wpa_supplicant interface creation in AP mode
Add a test case that creates a new interface in AP mode.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-11-22 17:54:07 +02:00
Jouni Malinen
29fb191cfd tests: Clear scan cache at the start of ap_vht80*
These test cases depend on the HT40 co-ex scans not swapping PRI/SEC
channels. It was possible for a test case to fail, e.g., in the
following sequence: ap_ht40_5ghz_match ap_vht80b.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-21 19:04:12 +02:00
Jouni Malinen
fe5aa8cb9c tests: EAP-pwd local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-21 18:00:33 +02:00
Jouni Malinen
d5482411cf tests: EAP-MD5 local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-21 18:00:33 +02:00
Jouni Malinen
6fb8b4bf84 tests: AP with open mode and select network twice
This verifies that the second SELECT_NETWORK for the same network starts
a new scan immediately if the previous connection attempt is waiting for
the next scan iteration to start.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-20 00:48:25 +02:00
Jouni Malinen
364418661d tests: PMKSA caching and EAPOL reauthentication
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 21:16:36 +02:00
Jouni Malinen
4013d6885b tests: Verify EAPOL reauthentication after FT protocol
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 21:16:29 +02:00
Jouni Malinen
119562cfdf tests: Clear FST sessions at the end of fst_setup_mbie_diff
This avoids issues with following test cases failing due to unexpected
starting state. This issue showed up with the following hwsim test case
sequence:
fst_setup_mbie_diff fst_dynamic_iface_attach

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 17:33:34 +02:00
Jouni Malinen
4f524e99d2 tests: Clear scan cache at the end of ap_wps_per_station_psk
It was possible for the WPS PBC state to get cached through to the
following test cases and that would trigger false failures. Fix this by
explicitly clearing the scan cache at the end of ap_wps_per_station_psk.
This issue was triggered with the following test case sequence:
ap_wps_per_station_psk autogo_pbc

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-18 18:03:22 +02:00
Jouni Malinen
89a79ca2b9 tests: Force hw capability re-fetch at the end of dbus_connect_oom
This is needed since the forced OOM may have forced the cached
information to be invalid or dropped. This issue was hit with the
following hwsim test case sequence:
ap_interworking_scan_filtering fst_sta_config_llt_large dbus_connect_oom
wpas_ctrl_enable_disable_network

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-17 19:50:34 +02:00
Jouni Malinen
1992af115a tests: D-Bus P2P and InvitationReceived
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-17 19:50:34 +02:00
Jouni Malinen
2299b54383 tests: D-Bus SaveConfig
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-15 19:08:05 +02:00
Jouni Malinen
8a848fae66 tests: EAP-pwd protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
8823178c96 tests: Start WNM-Sleep Mode in wnm_action_proto*
This is needed to avoid test case failures with additional state
validation in wpa_supplicant.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
63a19e56b0 tests: WNM Action protocol testing (PMF disabled)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
d0f56772ea tests: Fix wpas_ctrl_network for builds without Suite B support
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-02 00:30:00 +02:00
Jouni Malinen
f2d789f20b tests: EAP-pwd with Brainpool EC
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 11:30:48 +02:00
Jouni Malinen
1720ff58ec tests: More SET_CRED coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 01:03:45 +02:00
Jouni Malinen
71a3b85fff tests: mesh_basic_rates
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:50:17 +02:00
Jouni Malinen
dd5e61b4d8 tests: Additional SET_NETWORK coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:46:09 +02:00
Jouni Malinen
4128f53d8b tests: Additional wpa_supplicant SET ctrl_iface command coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:28:35 +02:00
Jouni Malinen
3392a90dec tests: Clear config_methods at the end of wpas_ctrl_set_wps_params
It was possible for dev[2] to be left with non-default config_methods
parameter at the end of the test case and that could result issues in
following test cases. This hit a failure in the following sequence:
wpas_ctrl_set_wps_params p2ps_channel_active_go_and_station_same

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 21:56:59 +02:00
Jouni Malinen
a63ebc159d tests: Fix wifi_display_parsing
Due to a typo in a function name, this test case ended up running
without the final cleanup. That could result in the following test cases
failing, e.g., when running this sequence:
wifi_display_parsing dbus_p2p_go_neg_auth

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 16:31:03 +02:00
Jouni Malinen
d4c3c055d5 tests: EAP-SIM DB error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 16:28:33 +02:00
Jouni Malinen
a6cc1e5747 tests: VHT with 160 MHz channel width and no DFS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-30 16:15:40 +02:00
Dan Williams
f0ef68892e tests: Add testcases for interface global properties
Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-28 23:41:33 +02:00
Jouni Malinen
8901189c0f tests: Update hapd_ctrl_set_error_cases RTS/fragmentation threshold
The previously used invalid values will become allowed with the
following commits, so change the test case to use values that both were
and will continue to be invalid to avoid unnecessary failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-28 20:53:15 +02:00
Jouni Malinen
7f2fea59ea tests: P2P device discovery and control character in Device Name
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-26 23:43:45 +02:00
Jouni Malinen
9cd8859ed6 tests: Fix scan flush in p2ps_channel_both_connected_same
Need to do this before associating with the AP and with the correct
devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-26 00:59:07 +02:00
Jouni Malinen
e1195efd1e tests: Skip radius_acct_ipaddr if kernel does not support ProxyARP
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-26 00:47:47 +02:00
Jouni Malinen
fde35be9b1 tests: WPA2-PSK AP with PMF required and PMF disabled on STA
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
c4082f7839 tests: WNM Action protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
9464e0996e tests: P2P autonomous GO and no P2P IE in Probe Response scan results
autogo_scan verifies the special case where a Probe Response frame
without P2P IE has been received from a GO (e.g., due to a non-P2P
interface requesting a scan) and P2P information from a Beacon frame
needs to be used instead to determine that the group is persistent.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
9cb3413090 tests: Move P2P helper functions to a separate file
This makes it easier to import these into the P2P test scripts.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
046e63fa2b tests: Interworking network selection and ANQP format errors
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
bd886d47c5 tests: P2P protocol tests for service discovery messages
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
97f8544305 tests: P2P protocol tests for Group Info parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
10649029ca tests: Wi-Fi Display extensions to P2P and special parsing cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
bf0ec17a51 tests: EAP-GPSK error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-17 21:42:36 +03:00
Jouni Malinen
2ab957afc5 tests: RADIUS Accounting and Framed-IP-Address
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-17 19:55:12 +03:00
Jouni Malinen
dd0d294d2f tests: Maximum STA count and limit on Probe Response frames
This verifies hostapd behavior with no_probe_resp_if_max_sta=1.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-17 19:31:17 +03:00
Avraham Stern
cf0dffd67e tests: Change wpas_config_file test for dedicated P2P Device case
SAVE_CONFIG command on the global control interface tries to save
the config file on all interfaces. The test disabled updating the
config file only on one interface, thus for configurations that
support a dedicated P2P Device interface, saving the config file
would still have succeeded on the P2P Device interface.

Fix the test by disabling updating the configuration file on the global
control interface (which will, in practice, disable this for the P2P
Device interface) in addition to disabling it on the main interface.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:34:04 +03:00
Avraham Stern
c5d070f249 tests: Set MAC address in wpas_ctrl_interface_add2 test
mac80211_hwsim only supports 2 different MAC addresses.
Configurations that use a dedicated P2P Device interface already
use these 2 addresses, so adding another interface on the same
PHY results in a duplicated MAC address.

Fix this by changing the MAC address of the added interface to make
sure the new interface has a unique MAC address.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:26:48 +03:00
Avraham Stern
f487e306b9 tests: Set bridge ageing in ap_wpa2_bridge_fdb test
Set the bridge ageing to 1 sec to make the bridge clear unused
addresses after this interval. Otherwise the test depends on
the local configuration of brctl.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:22:54 +03:00
Avraham Stern
f3b7761ab7 tests: Fix ap_cipher_tkip_countermeasures_sta test
Write the main interface address to the tkip_mic_test debugfs file
to generate Michael MIC failure event (which is different than the
p2p_dev_addr when a dedicated P2P Device interface is used).

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:11:05 +03:00
Jouni Malinen
faee294f1e tests: P2P GO Negotiation special cases
These test cases verify behavior with parallel scan operations while
going through GO Negotiation and duplicated GO Negotiation Request frame
RX with not-yet-ready sequence in GO Negotiation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-15 21:31:40 +03:00
Jouni Malinen
754c68de16 tests: Fix P2P message construction byte order for config_method
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-15 21:31:03 +03:00
Dan Williams
d7273180c6 tests: Fix VM tests for Fedora
Binaries aren't always in /usr/bin/, plus kvm is sometimes 'qemu-kvm'.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-14 19:23:00 +03:00
Jouni Malinen
78185978ed tests: Fix regulatory domain reset in FST test case failure cases
send_iface_detach_request() can fail and that resulted in skipping a
call to restore_reg_domain() and leaving unexpected country
configuration for following test cases. This could result in failures,
e.g., in this sequence: fst_proto wpas_mesh_open_5ghz

Fix this by ignoring exceptions from send_iface_detach_request() and
continuing to restore regulatory domain.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-14 18:43:26 +03:00
Jouni Malinen
4150c7c97c tests: Fix p2ps_channel_both_connected_same
I modified this test case for commit
eabf083984 ('tests: P2PS channel
handling') to use dev[2] instead of dev[0], but forgot to update the
p2ps_connect_p2ps_method() dev list to match that. Fix this to actually
use a concurrent connection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-13 18:57:20 +03:00
Jouni Malinen
d679ab74a5 tests: D-Bus ExpectDisconnect
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-12 18:14:21 +03:00
Jouni Malinen
7966674d73 tests: Fix dbus_interface to restore P2P channel list to default
It was possible for the dbus_interface test case to leave the P2P
channel lists with 5 GHz channels enabled due to the special driver=none
case. This could make the following P2P test case fail due to selecting
an unexpected channel. Fix this by forcing P2P channel list update at
the end of the dbus_interface test case.

This was triggering with the following hwsim test case sequence:
dbus_interface p2ps_connect_adv_go_p2ps_method_group_iface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-12 15:36:46 +03:00
Jouni Malinen
7c0d66cf7a tests: EAP-MSCHAPv2 error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-12 01:55:00 +03:00
Jouni Malinen
fd8f443247 tests: Dynamic radio in p2ps_channel_sta_connected_disallow_freq_mcc
Use a dynamic HWSimRadio in p2ps_channel_sta_connected_disallow_freq_mcc
to allow MCC test case to be executed in default setting (MCC disabled
for the default radios).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 21:42:03 +03:00
Jouni Malinen
3392503eb0 tests: Speed up P2PS test cases using join-a-group
Figure out GO operating frequency and use a single channel scan with
P2P_CONNECT-join.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 21:42:03 +03:00
Jouni Malinen
0033eea533 tests: Speed up p2ps_active_go_seeker by using a single-channel scan
There is no test coverage benefit from using all-channels scan in
P2P_CONNECT-join here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 21:42:03 +03:00
Jouni Malinen
7dd55f2486 tests: Speed up p2ps_connect_adv_go_persistent
Stop the pending P2P_LISTEN operation priot to issuing P2P_GROUP_ADD to
start a GO. This avoids excessively long wait for the previous Listen
step to complete before being able to start the GO. This makes
p2ps_connect_adv_go_persistent take significantly less time.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 21:42:03 +03:00
Jouni Malinen
85ceafd39a tests: Make P2PS tests less likely to fail in P2PS-PROV-DONE timeouts
The combination of starting P2P extended listen and issuing
P2P_ASP_PROVISION_RESP almost immediately after that while in P2P_LISTEN
state resulted in caes where the advertiser could end up going back to a
long listen state while trying to retransmit PD Request. This resulted
in p2ps_provision() timing out while waiting for P2PS-PROV-DONE
especially in p2ps_feature_capability_* test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 21:42:03 +03:00
Ilan Peer
eabf083984 tests: P2PS channel handling
Add tests to verify proper handling of channel considerations in P2PS
PD.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-11 21:42:03 +03:00
Ilan Peer
a537887074 tests: Add role parameter to asp_provision
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-11 21:42:03 +03:00
Jouni Malinen
f56478ab88 tests: P2PS advertisement as GO having persistent group (no peer entry)
This is a regression test case for the dev NULL pointer dereference in
p2p_build_prov_disc_resp().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 12:31:30 +03:00
Jouni Malinen
37211e15fa tests: EAP-MSCHAPv2 protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 00:59:58 +03:00
Jouni Malinen
0d2a7bad0f tests: MSCHAP UTF-8 to UCS-2 conversion error cases
This triggers all three error cases in utf8_to_ucs2().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-10 18:41:22 +03:00
Jouni Malinen
d79ce4a6ce tests: Additional OCSP coverage
Verify OCSP stapling response that is signed by the CA rather than a
separate OCSP responder. In addition, verify that invalid signer
certificate (missing OCSP delegation) gets rejected.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-10 17:32:53 +03:00
Jouni Malinen
0c6185fc73 tests: Run through OCSP tests with BoringSSL
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-09 23:48:30 +03:00
Max Stepanov
8cc4b06f75 tests: P2PS follow-on PD Request with status 11
Add a test case verifying deferred P2PS provision discovery when an
advertiser sends the status 11 (Fail: reject by user) in the follow-on
PD Request.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-10-07 17:07:21 +03:00
Andrei Otcheretianski
9773ea38cf tests: Put seeker into extended listen when deferred PD is expected
Not doing so may result in a deferred PD flow failure (currently the
hwsim tests succeeded because seeker never stopped find, spending enough
time listening, so the follow-on PD would succeed).

Fix this by calling p2p_ext_listen when the seeker receives a deferred
PD failure event. Cancel extended listening when PD is done and also
stop find when seek is done.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-07 17:07:21 +03:00
Andrei Otcheretianski
a3dc75020a tests: Add extended listen functions to WpaSupplicant
Add p2p_ext_listen() and p2p_cancel_ext_listen() functions.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-07 17:07:21 +03:00
Jouni Malinen
1c532fd5c0 tests: GAS/ANQP and extra ANQP elements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Michael Braun
ee2b0d19f5 tests: Verify group encryption is set up for VLANs early
Check that there are no unencrypted frames when using hostapd with VLANs
and WPA before the first station connects to the VLAN.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-10-06 01:25:39 +03:00
Jouni Malinen
a359c7bb23 tests: Read monitor messages more frequently
These test cases left at least one of the attached monitor sockets
blocking for excessive time: ap_wpa2_eap_aka_ext,
ap_hs20_req_conn_capab_and_roaming_partner_preference,
ap_hs20_min_bandwidth_and_roaming_partner_preference, ap_wpa_ie_parsing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 20:45:20 +03:00
Jouni Malinen
57ff37d0e8 tests: Speed up hostapd_oom_loop tests
At some point, these hostapd_oom_* test cases started to fail with
wpa_msg() allocation failure for the AP-ENABLED event. This resulted in
unnecessary long test execution (waiting 30 seconds for an event that
was dropped). Speed this up by using a shorter timeout.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
35d2e24bc7 tests: Read monitor events explicitly in wpas_ctrl_interface_add_many
This test case ended up hitting control socket output queue limit
unnecessarily due to the test script not reading pending event messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
d9052150eb tests: wpa_supplicant control socket and event burst
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
4b9d79b66e tests: Make it less likely to overflow wlan5 control iface socket
Number of test cases did not read all control interface socket events
from the dynamically added wlan5 interface. This could result in hitting
maximum socket TX queue length and failures in the following test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 01:42:42 +03:00
Jouni Malinen
7d56bd734c tests: Fix connect_cmd_roam with old scan results
connect_cmd_roam did not force a new scan to find the second AP. This
could result in failures due to the ROAM command getting rejected, e.g.,
in the following test case sequence: wext_pmksa_cache connect_cmd_roam.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 00:35:12 +03:00
Ilan Peer
cd27374f5f tests: Modify p2p_channel to also support CSA
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-03 21:42:33 +03:00
Johannes Berg
f227043711 tests: AP Channel Switch, one switch with only ECSA IE
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-03 21:37:28 +03:00
Jouni Malinen
dd124ee821 tests: hostapd WPS UPnP web OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-03 18:04:13 +03:00
Jouni Malinen
aeba66b28e tests: Fix OCSP response for ap_wpa2_eap_ttls_ocsp_revoked
Due to a serial number mismatch, the correct "revoked" status was not
used; instead "unknown" was used. While the test case would not fail for
this, incorrect code path was checked.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-02 19:16:04 +03:00
Jouni Malinen
242339ded1 tests: WPA2-PSK and retry for EAPOL-Key msg 3/4
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 18:55:19 +03:00
Jouni Malinen
403610d386 tests: Update server and user certificates (2015)
The previous versions expired, so need to re-sign these to fix number of
the EAP test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-01 01:37:47 +03:00
Johannes Berg
b1f69186d2 tests: Add test for hostapd cli ordering
When the 'SET wpa 2' command is executed last, it seems to somehow
reset parts of the settings, causing hostapd to beacon with the
pairwise cipher suite selector set to 00-0F-AC:0 (none/use-group).
This is not permitted and should be rejected; wpa_supplicant also
cannot connect.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-27 15:55:11 +03:00
Jouni Malinen
f455998afe tests: WPA2-Enterprise interactive identity entry and ENABLE_NETWORK
This verifies that ENABLE_NETWORK does not trigger reconnection if
already connected. The previous commit fixed a case where it was
possible for that to happen.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-09-22 12:03:53 +03:00
Jouni Malinen
53bd8653c2 tests: WPS and DISABLE/ENABLE AP
This is a regression test case for the issue fixed by the previous
commit (hapd->num_probereq_cb not getting cleared on deinit).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-09-07 20:53:23 +03:00
Jouni Malinen
ae3eacf771 tests: WPS ER learn OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 17:51:55 +03:00
Jouni Malinen
db9c88ebb5 tests: WPS ER SetSelectedRegistrar OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 17:27:14 +03:00
Jouni Malinen
fe67b94506 tests: WPS ER OOM in PutWLANResponse generation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 17:11:41 +03:00
Jouni Malinen
3d105cdff6 tests: WPS ER OOM in STA add
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 17:04:57 +03:00
Jouni Malinen
18478107c2 tests: WPS ER and OOM in HTTP response generation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 16:59:19 +03:00
Jouni Malinen
a302ee342c tests: Use sqlite3.Binary() with the log files
This is needed to avoid issues in some cases where 8-bit bytestrings may
be present in the otherwise text debug log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 16:53:23 +03:00
Jouni Malinen
eb95ced2d2 tests: WPS ER subscribe OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 16:38:38 +03:00
Jouni Malinen
d840350aca tests: WPS ER caching AP settings (OOM)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 16:31:38 +03:00
Jouni Malinen
7511ead0a7 tests: WPS against external implementation
This adds a Python-based minimal WSC protocol implementation to allow
more testing coverage to be reached for various error cases in protected
attributes. The wps_ext test case completes successful exchange in both
the Enrollee and Registrar roles acting in the middle of AP and STA. The
other test cases cover error cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 15:20:04 +03:00
Jouni Malinen
07536b18ce tests: WPS ER init failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 13:47:08 +03:00
Jouni Malinen
4c355e3ed1 tests: WPS AP configured for special ap_setup_locked=2 mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 13:42:30 +03:00
Jouni Malinen
d91a64c426 tests: WPS AP and UPnP event subscription and many events
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-06 11:56:10 +03:00
Jouni Malinen
61c3d464e6 tests: Multiple WPS ERs adding a new enrollee using PIN
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-06 11:32:02 +03:00
Jouni Malinen
084780f1ca tests: D-Bus GroupFormationFailure signal
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 23:01:20 +03:00
Jouni Malinen
926404a6b2 tests: WPS config method update for WPS and P2P
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 21:58:18 +03:00
Jouni Malinen
8aab52461d tests: IBSS RSN OOM during wpa_init
This is a regression test for a segfault that was fixed in the previous
commit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 21:35:58 +03:00
Jouni Malinen
2fca1f67cf tests: Secure mesh network setup failing due to wpa_init() OOM
This is a regression test for incorrect error path behavior that was
fixed in the previous commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 21:31:25 +03:00
Jouni Malinen
5c92d474e6 tests: AP and STA tracking with passive scan
Verify that Public Action frame from a STA is used to add a tracking
entry.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 20:29:01 +03:00
Jouni Malinen
9425bb7828 tests: Dualband AP rejecting authentication from dualband STA on 2.4 GHz
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:02 +03:00
Jouni Malinen
142f7ba643 tests: Dualband AP not replying to probes from dualband STA on 2.4 GHz
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:00 +03:00
Jouni Malinen
c58b5f65b1 tests: Unconnected station tracking
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 17:30:28 +03:00
Jouni Malinen
d188367148 tests: WPS Enrollee protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-01 12:31:16 +03:00
Jouni Malinen
fbf6b71791 tests: AP configuration using wps_config and wps_cred_processing=2
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-01 12:31:16 +03:00
Jouni Malinen
ea982de1ee tests: WPS ER timing out STA entry after negotiation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-01 12:31:16 +03:00
Jouni Malinen
96038a5f85 tests: WPS AP and advertisement OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-31 17:25:20 +03:00
Jouni Malinen
476daa0585 tests: WPS UPnP SetSelectedRegistrar protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-31 17:25:20 +03:00
Jouni Malinen
31e56b953c tests: WPS ER Selected Registrar timeout
This extends ap_wps_pbc_timeout to cover another long WPS timeout:
ER-initiated SetSelectedRegistrar timeout on AP. Using the same test
case for this avoids the need for another 120 second test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-31 17:25:20 +03:00
Jouni Malinen
24b7f2822e tests: More WPS/HTTP test coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-31 17:25:20 +03:00
Jouni Malinen
96ace55e6c tests: cfg80211 connect command to trigger roam
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-28 19:01:47 +03:00
Jouni Malinen
5a233fbdf0 tests: Regression test for D-Bus setting scan_freq and freq_list
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-28 00:20:30 +03:00
Jouni Malinen
6aaa661af1 tests: More WPS ER coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-26 21:09:37 +03:00
Jouni Malinen
2313e6c96b tests: BSS entry expiration when AP changes SSID
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-26 16:46:28 +03:00
Johannes Berg
c5e44b5917 tests: Catch RTNL assertions in the kernel check
Catch RTNL assertions made by ASSERT_RTNL() in the kernel message
checks.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-24 19:28:12 +03:00
Jouni Malinen
f9dd43eac2 tests: EAP-TLS/TTLS/PEAP session resumption
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-24 19:28:12 +03:00
Jouni Malinen
4c3ae1c0d1 tests: More WPS ER HTTP protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-19 01:36:48 +03:00
Jouni Malinen
0dae8c9974 tests: Skip TLS OCSP stapling test cases with BoringSSL builds
BoringSSL removed the OpenSSL API used to implement OCSP stapling
support.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 20:21:44 +03:00
Jouni Malinen
5f2e454790 tests: Allow group 25 to fail in ap_wpa2_eap_pwd_groups with BoringSSL
It looks like NID_X9_62_prime192v1 is not available, so allow that group
to fail without failing the full ap_wpa2_eap_pwd_groups test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 19:52:38 +03:00
Jouni Malinen
db036ed53d tests: Use group 26 instead of 25 in sae_oom_wpas with BoringSSL
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 19:46:56 +03:00
Jouni Malinen
a68d17929b tests: Allow group 25 to fail in sae_groups if running with BoringSSL
It looks like NID_X9_62_prime192v1 is not available, so allow that group
to fail without failing the full sae_groups test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 19:43:23 +03:00
Jouni Malinen
c965ae034a tests: WPS ER protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-17 00:18:32 +03:00
Jouni Malinen
035efb2c43 tests: Trigger failure on exceptions in the dbus_p2p_autogo thread
This makes the test case more robust in reporting failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-17 00:18:32 +03:00
Jouni Malinen
df1d01cfed tests: WPS and non-WPS AP in single hostapd process
This is a regression test case for WPS_AP_PIN triggered hostapd segfault
when a non-WPS interface was enabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-16 23:14:44 +03:00
Jouni Malinen
a8fd08f7fc tests: Fix FST tests to remove hostapd instance
These test cases added a new radio for the non-FST AP and while they
removed the radio itself, they did not remove the hostapd instance for
that radio. Remove that to avoid leaving behind invalid instances.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-16 22:42:55 +03:00
Jouni Malinen
5c267d718d tests: Fix WPS HTTP test case exceptions
resp.status is an integer, not a string.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-16 21:26:01 +03:00
Jouni Malinen
6e9220160c tests: P2P group formation response during p2p_find
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-15 00:15:57 +03:00
Jouni Malinen
6b86872a7c tests: Control interface output buffer limit
This verifies wpa_supplicant behavior in number of cases where the
external program opening a control interface socket does not behave
properly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-14 21:21:00 +03:00
Jouni Malinen
76de2b6708 tests: Scan and TSF updates from Beacon/Probe Response frames
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-13 21:06:23 +03:00
Jouni Malinen
708ec753bc tests: ap_scan=2 AP mode operation and scan failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 21:48:55 +03:00
Jouni Malinen
6da3b745f1 tests: Try users2.pkcs12 twice to add coverage
This allows manual verification of extra PKCS#12 certificate processing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 01:10:15 +03:00
Jouni Malinen
f59b946e39 tests: AP with open mode and wpa_supplicant ENABLE/DISABLE_NETWORK
ap_open_sta_enable_disable verifies that DISABLE_NETWORK that is issued
while connect/sme-connect radio work is pending is effective, i.e.,
prevents connection to disabled network.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-10 22:16:49 +03:00
Ilan Peer
7a2e562396 tests: Properly pass the num of channels to start.sh
The number of channels was not properly passed from the
run-all.sh script to the start.sh script. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-10 21:10:56 +03:00
Jouni Malinen
492f007ec5 tests: Various wpa_supplicant ctrl_iface OOM cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 23:52:43 +03:00
Jouni Malinen
5a145a55a1 tests: Verify FAIL-BUSY return on SCAN during gas_comeback_delay
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 20:52:29 +03:00
Jouni Malinen
ecafa0cf47 tests: RSN element protocol testing for STA side
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 20:04:07 +03:00
Jouni Malinen
e1eb0e9e6e tests: AP config using wps_config command with invalid passphrase
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-06 20:47:25 +03:00
Jouni Malinen
133716a722 tests: P2PS with group interface and intended iface addr in PD
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-06 20:47:25 +03:00
Max Stepanov
dbc21b1a81 tests: Add P2PS PD feature capability CPT tests
Add tests verifying a Coordination Protocol Transport exchange and
selection during P2PS provision discovery.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 20:47:25 +03:00
Andrei Otcheretianski
3c72383e03 tests: Re-factor PD and connection flows in P2PS tests
Reuse p2ps_provision() and p2ps_connect_pd() methods, and
remove the previous PD helper functions which are no longer used.

This fixes the previously "broken"
p2ps_connect_keypad_method_nonautoaccept and
p2ps_connect_display_method_nonautoaccept.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 20:47:19 +03:00
Andrei Otcheretianski
2f0f69a9ec tests: Use p2ps_provision() and p2ps_connect_pd() in p2ps_connect_p2ps_method()
Re-factor p2ps_connect_p2ps_method() so it reuses generic P2PS provision
and connection flows.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 20:45:15 +03:00
Ilan Peer
ab653ed2f6 tests: Add P2P GO frequency change policy tests
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 19:15:44 +03:00
Ilan Peer
48dd5e4da8 tests: Increase timeouts when MCC is enabled
When MCC is enabled, the remain of channel scheduling might
incur additional delays, so increase the timeouts to be able
to receive delays frames.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 19:03:24 +03:00
Ilan Peer
1977de368b tests: Skip some test cases when MCC is enabled
Some tests assume that only a single channel is used. Skip,
such tests/checks when MCC is enabled.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 19:03:21 +03:00
Jouni Malinen
6fad40df9e tests: Make dbus_p2p_group_termination_by_go more robust
Set peer_group_removed only if peer_group_added has already been set.
This fixes an issue where a propertiesChanged event triggered by an
earlier test case was able to get dbus_p2p_group_termination_by_go
terminated too early. This happened, e.g., with sequence
"dbus_p2p_two_groups dbus_p2p_group_termination_by_go".

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 18:52:10 +03:00
Jouni Malinen
5a21764994 tests: Avoid exception in dbus_p2p_two_groups
Only run peerJoined() steps once to avoid trying to use GetAll() on an
already removed group and double-removal of a group. This did not make
the test case fail, but the exception is printed out in pretty confusing
way to stdout, so better get rid of it.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 18:44:53 +03:00
Jouni Malinen
0e7cde7619 tests: hostapd ctrl_iface LOG_LEVEL
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 17:54:31 +03:00
Jouni Malinen
47824e0dbc tests: Fix hostapd debug level
Remove the duplicated -ddKt command line argument to avoid setting
hostapd debug level to EXCESSIVE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 17:53:52 +03:00
Johannes Berg
3dfa519c32 tests: Work around iw scan getting stuck
On recent kernels, it seems that something changed (scheduler?)
that makes hwsim send the scan done event so quickly that iw isn't
scheduled back in to listen for it, causing iw to get stuck.

Work around this by using the scan trigger command (it'll be quick
enough so that we don't really need to wait) and the scan trigger
and dump commands where the results are required (and use a small
sleep there instead of waiting for the scan results.)

I'll try to fix this separately in iw later.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-02 21:37:10 +03:00
Jouni Malinen
a0e117c684 tests: P2P extended listen timing operations
This verifies P2P extended listen timing operations by confirming that a
peer is not discoverable during the provisioning step and that the peer
becomes discoverable after having removed the group during such
provisioning step. The latter case was broken until the 'P2P: Cancel
group formation when deleting a group during group formation' commit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 21:37:10 +03:00
Jouni Malinen
20fd8defa0 tests: D-Bus PropertiesChanged events on P2P Peer.Groups
Verify that Groups list for a P2P Peer gets updated properly on group
addition and removal (three different paths).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 21:37:09 +03:00
Jouni Malinen
a2bc326e1e tests: Run Suite B test cases with OpenSSL 1.1.0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 17:11:47 +03:00
Jouni Malinen
a00b218651 tests: Skip ERP tests with EAP methods that are not supported
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
597516df79 tests: Skip LEAP tests if not included in the build
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
24072e17bc tests: Skip IEEE 802.1X dynamic WEP tests in FIPS mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
a1eabc74b8 tests: Skip WPA(V1) test cases in FIPS mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
38934ed100 tests: Skip ap_wpa2_eap_psk_oom and ap_ft_oom in FIPS mode
omac1_aes_128() implementation within crypto_openssl.c is used in this
case and that cannot fail the memory allocation similarly to the
non-FIPS case and aes-omac1.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
06cdd1cd79 tests: Allow FIPS error case for openssl_cipher_suite_config_wpas
OpenSSL rejects the cipher string 'EXPORT' in FIPS mode in a way that
results in the locally generated error showing up before the EAP method
has been accepted.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
0392867b6b tests: Skip EAP-pwd NTHash test in FIPS build
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
c8e82c94da tests: Skip EAP-IKEV2 tests if not included in the build
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
e7ac04ceaf tests: Skip EAP-MD5 and EAP-MSCHAPV2 test cases in FIPS mode
These would require MD5 or MD4 which are not allowed in FIPS mode.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
ca158ea621 tests: Skip EAP-TTLS/CHAP, MSCHAP, MSCHAPV2 test cases in FIPS mode
In addition, replace some of the CHAP cases with PAP since that enables
more coverage without breaking the main test focus.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
d35b0227c1 tests: Use openssl pkcs12 -descert workaround to allow FIPS mode
The PKCS12 file with default openssl options cannot be used with OpenSSL
1.0.1 in FIPS mode. Replace this with -descert version as a workaround.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
b2a1f26259 tests: Set FIPSLD_CC=gcc (if not set) to make CONFIG_FIPS=y use easier
This makes it easier to build wpa_supplicant for OpenSSL FIPS mode
testing. wpa_supplicant/.config needs following type of configuration
for this:
CONFIG_FIPS=y
CFLAGS += -I/usr/local/ssl/include
LIBS += -L/usr/local/ssl/lib
CC=/usr/local/ssl/fips-2.0/bin/fipsld

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-01 16:57:04 +03:00
Jouni Malinen
72f460a27b tests: Support non-social oper channel in persistent_group_per_sta_psk
This allows driver-based preference list to override default operating
channel selection mechanism by using a non-social P2P find if needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-31 15:24:45 +03:00
Jouni Malinen
191d8c4f78 tests: Make wifi_display enforce social channel as operating channel
Previously, this was assumed to be the case due to default channel
selection behavior. However, that may not be the case with driver-based
preference list processing. Enforce a social channel to be used as the
operating channel here since dev[2] uses social channel only device
discovery and needs to find the GO.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-31 15:24:45 +03:00
Jouni Malinen
9dd21d5183 tests: Allow local disconnect in openssl_cipher_suite_config_wpas
The openssl_ciphers="EXPORT" case may result in locally generated
disconnection event if the OpenSSL version used in the build rejects
export ciphers in default configuration (which is what OpenSSL 1.1.0
will likely do). Don't report a test case failure in such a case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-28 21:00:18 +03:00
Jouni Malinen
d8aa603d53 tests: Skip fst_attach_wpas_error if no FST support
This check for FST testing support was forgotten from one of the new FST
test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 18:56:33 +03:00
Max Stepanov
aff4b2c139 tests: Add CPT parameters to p2ps_provision()
Add adv_cpt and seeker_cpt parameters to p2ps_provision() function.
The seeker_cpt is used in P2P_ASP_PROVISION command by a seeker, the
adv_cpt parameter is in P2P_ASP_PROVISION_RESP by an advertiser.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:20 +03:00
Max Stepanov
5e9d05115f tests: Add CPT parameter to p2ps_advertise()
Add an optional parameter to p2ps_advertise() function allowing to
specify CPT priority values.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:20 +03:00
Max Stepanov
c1e31bdb7f tests: Add CPT parameter to WpaSupplicant asp_provision()
Add an optional CPT parameter to asp_provision() method of
WpaSupplicant.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Andrei Otcheretianski
e999e56c2c tests: Add p2ps_connect_pd() method
Add p2ps_connect_pd() helper method which strictly validates the PD
results and establishes the connection between peers accordingly.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Andrei Otcheretianski
4796021088 tests: Add p2ps_provision() method
Add generic provision method. This method receives a seeker and an
advertiser devices, advertisement id, method, and a flag which indicates
whether deferred flow is expected. The method returns P2PS-PROV-DONE
events and the pin (if keypad or display method is used).

This method is needed to simplify the P2PS provision flows in the tests.
This method complies to the P2PS specification regarding the expected
order of the show and display PIN events.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Andrei Otcheretianski
1a1b015622 tests: Add asp_provision method to wpa_supplicant
Add asp_provision method which issues either P2PS PD Request or, if the
status is provided, continues the deferred flow by sending follow on
PD Request.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Jouni Malinen
f751368ec3 tests: Make discovery_auto more robust
This test case could fail if there were old BSS entries remaining in
cfg80211 scan results. That happened, e.g., when running test cases in
the following sequence: "discovery_social_plus_one discovery_auto".

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:14 +03:00
Jouni Malinen
898b33095e tests: FST SESSION_INITIATE and SESSION_RESPOND error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:14 +03:00
Jouni Malinen
78ca254237 tests: More FST GET_PEER_MBIES coverage
The case of valid but unknown peer address was not covered previously.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:13 +03:00
Jouni Malinen
54b227a1ff tests: Use a shared FST setup function
This removes quite a bit of duplicated code. In addition, this starts
using different FST group names to get additional coverage.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:13 +03:00
Jouni Malinen
1f9427c9cd tests: Explicitly close hostapd global control socket on RELOG
Without this, the run-tests.py socket could have been left in attached
to receive all hostapd global events during a test case. This could hit
the limit of pending messages on the socket since there is nothing
clearing this socket during the execution of a test case. Fix this by
explicitly closing the socket after having completed the RELOG command.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
5994658309 tests: FST attach errors in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
6e2536fc79 tests: FST Setup Request processing and OOM during MBIE update
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
2fffbd4db8 tests: FST setup multiple times
This verifies FST group dialog_token wrap-around and behavior with large
number of session setups and teardowns.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
3aa1ca9aec tests: Additional FST Setup test coverage
This adds a test case that goes through session initialization through
separate commands that can be modified more easily for special case. The
first such special case is using special FST Setup Request frames with
non-standard MBIE contents to hit different code paths for finding the
interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:08 +03:00
Jouni Malinen
9162eed42b tests: Extend fst_ap_ctrl_iface to support existing groups
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:08 +03:00
Jouni Malinen
6c247100e8 tests: FST protocol tests to verify invalid STIE header
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 11:22:21 +03:00
Jouni Malinen
8936b095ea tests: Fix ap_wps_wpa_cli_action outside VM
Pass absolute path to the daemonized wpa_cli process and add read
privileges for everyone on the action script to make this test case work
better when run without a VM.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-23 20:48:33 +03:00
Jouni Malinen
569f8f9b87 tests: eloop socket re-open from timeout/socket handler
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-23 18:39:02 +03:00
Jouni Malinen
2602a2ff9e tests: WPS events and wpa_cli action script
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-22 17:12:07 +03:00
Anton Nayshtut
4be0dd2232 tests: hostapd DUP_NETWORK
This test checks the functionality of DUP_NETWORK global control
inteface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:56:19 +03:00
Jouni Malinen
7b7e8a2ee7 tests: Use codecov build hostapd/wpa_supplicant in FST tests
Try to use the special build for --codecov purposes, if present, instead
of hardcoding the hostapd/wpa_supplicant binary to the default location.
This is needed to collect code coverage correctly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:10:55 +03:00
Jouni Malinen
ccfe3e5db9 tests: wpa_supplicant ctrl_iface network OOM in string parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:07:04 +03:00
Jouni Malinen
523061996c tests: wpa_supplicant control interface wait for client
This test case is also adding code coverage for process daemonizing and
Linux tracing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:07:04 +03:00
Jouni Malinen
5b0afb0a29 tests: UUID parsing error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 22:04:50 +03:00
Jouni Malinen
bd4b9ee5ca tests: NFC connection handover to form a new P2P group and IP pool OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 17:28:44 +03:00
Jouni Malinen
ccf4d7644a tests: WPS ER OOM in XML processing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 16:44:51 +03:00
Jouni Malinen
2c3a019083 tests: Initial AP configuration and OOM during PSK generation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 16:31:12 +03:00
Jouni Malinen
3b765ea545 tests: FST-MANAGER TEST_REQUEST error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:29:39 +03:00
Jouni Malinen
7ba240b90f tests: FST protocol testing for Ack Response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:08:06 +03:00
Jouni Malinen
ca73f7d2d0 tests: FST protocol testing for Setup Response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:06:31 +03:00
Jouni Malinen
6b294e57a5 tests: Speed up fst_proto by waiting for MGMT-TX-STATUS event
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:05:31 +03:00
Jouni Malinen
4390030a51 tests: FST-MANAGER TEST_REQUEST GET_FSTS_ID and ID not found
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
e84297a8e6 tests: FST-MANAGER SESSION_RESPOND failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
feb64551d9 tests: FST-MANAGER SESSION_ADD OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
f067a05589 tests: FST-MANAGER SESSION_SET parameter parsing error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
a248e29dac tests: FST-ATTACH OOM in fst_iface_create()
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:13:20 +03:00
Jouni Malinen
3da112c5af tests: Use direct fst_test_common access
There is no need to go through fst_module_aux to reach fst_test_common
since both of these get imported here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:02:46 +03:00
Jouni Malinen
febd7a4c40 tests: FST attach with llt=0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:01:44 +03:00
Jouni Malinen
742408afa8 tests: Verify wpa parameter in hostapd GET_CONFIG
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-18 00:20:23 +03:00
Jouni Malinen
b6387212f5 tests: Add coverage for new vht_capab values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-18 00:00:20 +03:00
Jouni Malinen
087632168b tests: Add hostapd interface with driver specified
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 23:57:04 +03:00
Jouni Malinen
f752fd9264 tests: FST session create OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
19a0602d86 tests: FST send action OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
d99ed42a15 tests: FST AP configuration and OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
5e2ad41da3 tests: FST protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
6f3815c0da tests: WPA2-PSK-FT RRB protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 11:16:15 +03:00
Anton Nayshtut
6f7b96145f tests: hostapd global-to-local control interface redirection
This implements basic global-to-local control interface command
redirection tests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:23:26 +03:00
Jouni Malinen
2531dc9f6b tests: wpa_supplicant ctrl_iface DUP_NETWORK (global)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
c0183847d9 tests: Silence unnecessary get_driver_status() prints
Commit 53606b105c ('tests: Wait for scan
to complete on all interfaces in reset()') added option of passing
ifname to get_driver_status(). This could result in FAIL-NO-IFNAME-MATCH
returns that get printed out in "Ignore unexpected status-driver line"
messages if the interface is not found. Check for this case to avoid
that unnecessary print.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
85eb89fe56 tests: FST with RSN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
86ba832cf2 tests: FST AP setup failing due to OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
d6d549c47c tests: FST control interface behavior
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Anton Nayshtut
41a256ecd9 tests: Add FST module tests
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
dca95e6924 tests: Invalid P2PS attribute parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-13 00:51:15 +03:00
Jouni Malinen
2496adf046 tests: IEEE 802.1X and EAPOL Authenticator aWhile handling
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:45:16 +03:00
Jouni Malinen
b7bdfb68f2 tests: IEEE 802.1X and EAPOL_SET command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:34:18 +03:00
Jouni Malinen
a32a6d2ca2 tests: IEEE 802.1X and EAPOL_REAUTH request
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:34:16 +03:00
Jouni Malinen
778325501b tests: More coverage for EAPOL Authenticator state dump
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 00:20:44 +03:00
Jouni Malinen
6c4b5da46d tests: EAP-TLS and TLS version configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-08 19:52:14 +03:00
Andrei Otcheretianski
1ee6dd2671 tests: Few trivial cleanups to P2PS tests
Remove unused variables and replace split(" ") with just split().

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-08 16:52:42 +03:00
Andrei Otcheretianski
53606b105c tests: Wait for scan to complete on all interfaces in reset()
When WpaSupplicant executes reset() it waits until all the ongoing scans
are completed. However, it checks the status of the wlanX interface
only. If a dedicated P2P device interface is used, scan may be still
running on the P2P Device interface, e.g., due to P2P_FIND. This might
affect subsequent tests.

Fix this by waiting until the scan is done both on wlanX and P2P
Device interfaces.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-08 16:52:42 +03:00
Jouni Malinen
ba53a8a009 tests: Additional invalid NDEF records
These are regression tests for NDEF message parsing issues with payload
length validation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-08 16:52:42 +03:00
Jouni Malinen
e0236b152c tests: IEEE 802.1X and HELD state
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 19:25:31 +03:00
Jouni Malinen
1f560ff08f tests: Add Undefined Behavior Sanitizer (ubsan) configuration
This allows hostapd and wpa_supplicant to be built for hwsim test cases
with ubsan functinality from the recent gcc/clang compiler versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 18:23:04 +03:00
Jouni Malinen
34d3eaa8ee tests: WPA2-PSK-FT AP over DS protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
cf671d54bd tests: WPA2-PSK-FT and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
7b741a5383 tests: WPA2-PSK-FT AP with GCMP-256 cipher
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
348bc4e0eb tests: IEEE 802.1X connection and EAPOL-Key protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
2ff4928967 tests: IEEE 802.1X and EAPOL-Start retransmissions
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
85774b70a1 tests: EAP server and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-01 00:42:09 +03:00
Jouni Malinen
405c621cdb tests: WPA2-Enterprise connection using MAC ACL
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-01 00:34:27 +03:00
Jouni Malinen
df7ad0fa11 tests: EAP-TLS and unknown OCSP signer
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-30 22:05:37 +03:00
Jouni Malinen
d2a1047e67 tests: Invalid OCSP data (parsing failure)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-30 22:01:05 +03:00
Jouni Malinen
7be5ec991d tests: Invalid openssl_ciphers value
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-30 21:55:59 +03:00
Jouni Malinen
6eddd5303c tests: EAP-FAST/MSCHAPv2 and server OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-30 21:36:12 +03:00
Jouni Malinen
b3ff3decf6 tests: DH parameter file DSA conversion and error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
0c83ae0469 tests: EAP-TLS with PKCS12 that includes additional certificates
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
b1fb42751a tests: EAP-TLS and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
b197a8194b tests: EAP-TLS and server checking CRL
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
486f4e3c83 tests: EAP-SIM and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
f1ab79c34c tests: WPA2-Enterprise connection using EAP-IKEv2 and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
8c4e4c01f6 tests: WPA2-Enterprise connection using EAP-PSK and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
10ba4ae4d3 tests: SAE and no random numbers available
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
bf7071bb0c tests: WPA2-PSK AP and no random numbers available
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
0937ea746b tests: Concurrent P2P autonomous GO on 5 GHz and HT40 co-ex
This verifies that 20/40 MHz co-ex scan does not force MCC with PRI/SEC
channel switch.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
7c1fd15f86 tests: Use 16 instead of 13 as the cwmin/cwmax invalid case
This is needed to allow the parser to accept 15 which is actually a
valid value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 23:24:15 +03:00
Jouni Malinen
fee39910ee tests: Check GAS and ANQP completion events in gas_fragment
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 17:13:24 +03:00
Jouni Malinen
17ce7bb9db tests: SAE and invalid commit-scalar value 1
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 12:51:15 +03:00
Jouni Malinen
a3704b2aae tests: Use the new CTRL-EVENT-NETWORK-NOT-FOUND in ap_open_select_any
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 11:09:22 +03:00
Jouni Malinen
9e286d5ea2 tests: sae_groups to include Brainpool EC groups
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-26 22:41:51 +03:00
Jouni Malinen
b1f487cb74 tests: Try heavier SAE groups in sae_groups
This changes the sae_groups test case design to try with every group and
skip triggering test failure for the heavier ones that are likely to
fail in some VM setups under load. This provides more testing coverage
by not limiting the test based on lowest common setup.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-25 20:53:07 +03:00
Jouni Malinen
33dcced589 tests: SAE with number of different passwords
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-24 21:07:18 +03:00
Jouni Malinen
1965e1965e tests: SAE anti clogging protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 23:10:36 +03:00
Jouni Malinen
939527b59d tests: SAE reflection attack
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 23:10:36 +03:00
Jouni Malinen
d5479878b8 tests: HT40 co-ex scan conflict (HT40-)
This verifies a case where the neighboring BSS is at the other end of
the band and has its PRI channel further away.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 11:25:22 +03:00
Jouni Malinen
24f4ad04f7 tests: Use different channel offset for the second 160 MHz VHT AP
This increases testing coverage a bit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 02:42:17 +03:00
Jouni Malinen
5161ea8e30 tests: VHT 80 MHz with different HT40 channel options
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 02:30:24 +03:00
Jouni Malinen
5527a3911a tests: SAE protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-22 00:04:09 +03:00
Jouni Malinen
80dcede592 tests: HT40 co-ex scan and other BSS not affected
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-21 22:27:34 +03:00
Jouni Malinen
eb6d353270 tests: SAE and OOM in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:31:12 +03:00
Jouni Malinen
6e3ee4c532 tests: Suite B with external RADIUS server
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Jouni Malinen
d9e2a057c8 tests: D-Bus AddNetwork and connection with WPA+WPA2-Enterprise AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Jouni Malinen
4b0e0c53fc tests: WPA IE parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Jouni Malinen
1275208c82 tests: Update wpas_ctrl_network to match removal of WEP as group cipher
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Jouni Malinen
664093b55b tests: WPA2-PSK-FT AP and invalid response IEs
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 18:04:50 +03:00
Jouni Malinen
50a19b0107 tests: HT40 co-ex scan finding an AP advertising 40 MHz intolerant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 16:16:11 +03:00
Jouni Malinen
f0b347b615 tests: HT40 co-ex scan conflict with HT 20 MHz AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 16:02:53 +03:00
Jouni Malinen
97e4688b2f tests: HT40 on 5 GHz with invalid channel pair
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 15:51:41 +03:00
Jouni Malinen
5ce2a9ac50 tests: Make dbus_old_wps_pbc more robust
Flush the cfg80211 scan cache explicitly to avoid false failure reports
if a BSS entry from an earlier test case remain. Such a failure could be
hit, e.g., with the following test case sequence:
wpas_mesh_mode_scan p2p_channel_random_social dbus_old_wps_pbc

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 15:35:52 +03:00
Jouni Malinen
81f8e7e9fb tests: Increase HTTPConnection timeout in ap_wps_upnp_http_proto
It looks like the previous timeout of 0.1 seconds could be hit under
parallel VM load, so double this to 0.2 second to avoid hitting
unnecessary test failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-19 13:45:16 +03:00
Jouni Malinen
001c4bf5b3 tests: D-Bus RemoveClient()
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-19 13:07:03 +03:00
Ben Rosenfeld
2e96aef298 tests: Wait on the global control interface for CTRL-EVENT-REGDOM-CHANGE
The event is not interface specific, so wait for it on the global
control interface socket.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-06-19 11:31:53 +03:00
Avraham Stern
99b83d0abd tests: Fix grpform_wait_peer group removal in P2P Device case
Get the P2P group interface name so it will be used for group removal to
support configurations that use a dedicated P2P Device interface.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-06-19 11:28:20 +03:00
Avraham Stern
c340e0e8f4 tests: Fix p2p_set_discoverability waiting for CTRL-EVENT-CONNECTED
Wait on the group control interface to support configurations that
use a dedicated P2P Device interface.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-06-19 11:27:15 +03:00
Ilan Peer
bab3191718 tests: Fix wifi_display to use the global control interface
This is needed if the configuration is using a dedicated P2P Device
interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 11:14:30 +03:00
Ilan Peer
063006328a tests: Fix wifi_display_persistent_group with P2P Device
Use the global control interface to list the P2P Device persistent
networks. Get and parse the P2P-GROUP-STARTED events, so later the
interface names would be available for the connectivity test etc. Both
of these are required when a dedicated P2P Device interface is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 11:12:33 +03:00
Ilan Peer
5590d2ecd1 tests: Fix autogo_pbc() waiting for WPS-PBC
Wait on the global control interface to support
configurations that use a dedicated P2P Device interface.

Note that the group interface cannot be used, as the group
interface name is not saved since no group was created.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:59:01 +03:00
Ilan Peer
c0b57b241a tests: Use global and group control interface in test_p2p_autogo
This is required when a dedicated P2P Device is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:46:17 +03:00
Ilan Peer
a2168cf476 tests: Modify reset() to use the global control interface
Change the reset() method to use the global control interface
for resetting P2P state and also add a call to P2P_FLUSH.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:38:22 +03:00
Ben Rosenfeld
0208e8329d tests: Use global interface for "P2P_SET"
Setting P2P per_sta_psk should be done using the global control
interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-06-19 10:37:08 +03:00
Jouni Malinen
31bd8ea2e9 tests: NFC static handover with invalid contents
This adds test coverage to p2p_procesS_nfc_connection_handover() error
paths. This is also a regression test case for a memory leak on two of
these error paths.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-19 01:23:24 +03:00
Jouni Malinen
27f2fab021 tests: WPA2-Enterprise connection using EAP-FAST and OOM in PRF
This is a regression test case for a memory leak on a TLS PRF error
path. In addition, this provides more coverage for this error path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-19 01:23:24 +03:00
Jouni Malinen
0b5740fdef tests: More RADIUS testing coverage with CUI/User-Name in ACL response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-19 00:23:49 +03:00
Jouni Malinen
e51c8b2e97 tests: Make ap_wps_ap_scan_2 more robust
The test sequence "scan_and_bss_entry_removed ap_wps_ap_scan_2" resulted
in failure due to an old BSS entry remaining from the first test case to
the second and the WPS_PBC operation on a forced BSSID ending up picking
the incorrect BSS entry. Make this more robust by clearing the scan
results from cfg80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-18 22:33:48 +03:00
Jouni Malinen
492c3a9180 tests: Make ap_wps_pbc_overlap_2* less likely to cause issues
Both of these test cases were leaving out BSS entries with active PBC
mode at the end of the test. This could result in the next text case
failing, e.g., in "ap_wps_pbc_overlap_2ap grpform_ext_listen" and
"ap_wps_pbc_overlap_2sta grpform_ext_listen" sequences. Fix this by
flushing the scan results more carefully at the end of the PBC overlap
test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-18 22:29:14 +03:00
Jouni Malinen
9f622398e4 tests: Print a command line to re-run failed test sequence
This makes it easier to test whether a specific test sequence results in
a reproducible test failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-18 21:39:24 +03:00
Jouni Malinen
7242b3df37 tests: P2PS with large number of services in Probe Request/Response
This verifies capability to split the response into multiple P2P
elements.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 18:14:04 +03:00
Jouni Malinen
3d7d9f18db tests: Extend P2PS service seek test to cover multiple services
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 18:14:04 +03:00
Max Stepanov
5a2c379736 tests: P2PS wildcard SD probe
Verify that advertiser returns 'org.wi-fi.wfds' wildcard in a Probe
Response frame if at least one P2PS advertisement is present.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-18 18:14:04 +03:00
Jouni Malinen
866eb800e5 tests: VENDOR_ELEM_ADD for various frames
This increases testing coverage for VENDOR_ELEM mechanism by explicitly
verifying that the requested element gets added to each of the supported
frame types.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-15 14:16:30 +03:00
Andrei Otcheretianski
a4c4c1d0e4 tests: Add p2ps_cli_probe and p2ps_go_probe tests
Test P2PS GO and CLI discoverability on group operating channel.
In order to implement these tests, refactor p2ps_connect_p2ps_method
and test_p2ps_connect_adv_go_pin_method to reuse the code for
connection establishment. Also change p2ps_exact_seek so it will
allow getting Probe Response frames from several peers.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Andrei Otcheretianski
d134a2868e tests: Fix inconsistent indentation
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Andrei Otcheretianski
ce394d33e7 tests: Fix p2ps_connect_adv_go_pin_method case
test_p2ps_connect_adv_go_pin_method() expects that
p2ps_provision_keypad_method() returns P2PS-PROV-DONE with details
needed for a connection. However, this event was overridden which
resulted in an incorrect test flow skipping the connection
establishement. The test would pass, however, without really trying to
connect. Fix this by returning the correct event.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Jouni Malinen
dd025790e5 tests: IBSS on 5 GHz band
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 19:35:19 +03:00
Jouni Malinen
8cc9bc0775 tests: WNM BSS Transition Management in different countries
This increases testing coverage for ieee802_chan_to_freq*() functions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 18:11:14 +03:00
Jouni Malinen
6d01255e57 tests: GAS/ANQP query and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 16:17:33 +03:00
Michael Braun
54cf411f4c tests: Verify correct VLAN operation in multi-BSS multi-VLAN case
This adds hwsim test ap_vlan_iface_cleanup_multibss. It connects two
stations in different BSS but the same hostapd process. First both
stations are in VLAN 1, then they get reauthenticated into VLAN 2. Due
to the ordering of the stations moving around, this test checks that
bridge and tagged interface referencing counting is done globally, such
that the tagged interface is not removed too early and no bridge is
left over.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-06-14 13:40:50 +03:00
Jouni Malinen
13b3497245 tests: D-Bus Reconnect command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 11:38:14 +03:00
Jouni Malinen
c1e38fec75 tests: Make flush_scan_cache() more robust
There seem to be cases where flush_scan_cache() was unable to clear all
BSS entries due to a hidden SSID BSS (SSID length 0) showing up again
from cfg80211 BSS table. Check for this and run the flush operation
again if any entries remain.

This fixes an issue where the following hwsim test case sequence
resulted in the last test case failing due to the old BSS entry from the
first test case being in place and showing unexpected flags information:
ap_hs20_min_bandwidth_home_hidden_ssid_in_scan_res
ap_hs20_remediation_required
ap_mixed_security

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-12 21:28:14 +03:00
Jouni Malinen
ee19ba74cd tests: P2P GO and 5 GHz channels 165 (allowed) and 169 (disallowed) in US
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-12 20:54:01 +03:00
Jouni Malinen
c518fecc82 tests: Pending GAS query interrupted with deinit
These are regression test cases for a segmentation fault issue (use of
freed memory) where interface removal happened while a gas-query item
was pending.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-11 02:57:34 +03:00
Jouni Malinen
1a5041791e tests: Create a P2P persistent group with ADD_NETWORK
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-11 00:02:05 +03:00
Jouni Malinen
3a59cda1d0 tests: D-Bus WPS/PBC operation and signal for PBC overlap
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-10 20:51:30 +03:00
Jouni Malinen
ee120ff381 Remove [MU-BEAMFORMEE] option from hostapd vht_capab parameter
The standard hardcodes the MU Beamformee Capable subfield is hardcoded
to 0 when transmitting by an AP, so there is no need to provide a
configuration parameter for setting this to one.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-10 13:41:54 +03:00
Jouni Malinen
f5d5161db1 tests: Allow D-Bus GONegotiationRequest signal to include extra argument
This is needed to allow the GO Intent argument to be added without
breaking these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-06 18:16:19 +03:00
Jouni Malinen
d4518fe8ed tests: More WPA2-EAP + PMF test coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-06 17:13:21 +03:00
Jouni Malinen
98c71cf6b5 tests: Control interface behavior on scan SSID parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-05 15:55:26 +03:00
Jouni Malinen
d6f6a86a04 tests: wps_priority in configuration and WPS behavior
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-04 14:04:16 +03:00
Jouni Malinen
f572ae809a tests: D-Bus P2P Cancel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-29 21:13:31 +03:00
Jouni Malinen
2a8e3f35ef tests: D-Bus WPS Cancel operation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-29 21:00:02 +03:00
Jouni Malinen
be43588a3c tests: P2P group re-invocation with invitation response getting lost
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-29 13:34:22 +03:00
Jouni Malinen
571a1af270 tests: D-Bus FindStopped signal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-25 18:31:09 +03:00
Jouni Malinen
efe353d1aa tests: UPDATE_BEACON to change vendor_elements at runtime
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 13:43:30 +03:00
Jouni Malinen
5e0bedc63c tests: EAP-EKE with server OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 13:36:16 +03:00
Jouni Malinen
f7e3c17b68 tests: WPA2-Enterprise connection using EAP-EKE with serverid NAI
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 12:48:52 +03:00
Jouni Malinen
b4b2f300db tests: ERP with EAP-EKE
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 12:01:25 +03:00
Jouni Malinen
5748d1e5f8 tests: EAP-TTLS with server certificate valid beyond UNIX time 2^31
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 11:24:35 +03:00
Jouni Malinen
768ea0bc32 tests: DH params with 2048-bit key
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 11:03:42 +03:00
Jouni Malinen
75e41ab78a tests: Automatic channel selection with chanlist set
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 10:43:44 +03:00
Jouni Malinen
38ad1ea317 tests: Fix persistent_group_per_sta_psk for P2P Device case
The dev[1] <--> dev[2] data connectivity test was using incorrect
function. dev[2] is also using a P2P group and as such, can have a
different group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-08 18:33:20 +03:00
Jouni Malinen
36e6633415 tests: Fix go_neg_with_bss_connected with P2P Device
Group interface name was fetched from the results of an incorrect group
formation and because of this, group removal failed in case P2P Device
is used and dev[1] ends up getting different group ifname for the
groups.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-08 18:33:16 +03:00
Jouni Malinen
f033200e94 tests: Add P2P Device support for persistent_group
The network operations need to use the global control interface to be
performed on the interface that stores the network profiles for
persistent groups.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-08 18:33:11 +03:00
Ben Rosenfeld
622ef15b77 tests: Update group_ifname after group start
After P2P-GROUP-STARTED event, use group_form_result in order to update
the group_ifname for the device. This is needed when using P2P Device
for managing P2P operations which results in a separate group interface
being used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:32:34 +03:00
Ben Rosenfeld
6f27f79084 tests: Use list_networks with p2p=true in test_p2p_channel
In case that there is a need to list the persistent P2P networks,
the global control interface needs to be used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:31:05 +03:00
Ben Rosenfeld
9766d403a6 tests: Change persistent_go_client_list to use global interface
Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:30:45 +03:00
Ben Rosenfeld
85ef1f4345 tests: Use global interface in persistent_group_invite_removed_client
When removing a persistent P2P group, global interface needs to be used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:29:29 +03:00
Ben Rosenfeld
8e751cfa05 tests: Change list_networks() to use global interface with P2P
list_networks() always used the wlanX control interface to query for the
current list of networks. However, when a dedicated P2P Device is used,
the global control interface should be used when checking persistent
group network profiles.

Fix this by adding an optional parameter indicating that the P2P
networks are requested, and in such a case use the global control
interface.

In addition update test_p2p_persistent to use the argument when needed.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:29:03 +03:00
Ben Rosenfeld
d7e2d79b1a tests: Change persistent_group_per_sta_psk to use global interface
This is required for cases that a dedicated P2P Device interface
is used and then the event will happen on the global interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:27:25 +03:00
Ben Rosenfeld
cbeab59c9f tests: Change test_p2p_persistent to use the global control interface
Send request to set persistent_reconnect on the global control
interface so it would also work when using a dedicated P2P Device
interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:27:04 +03:00
Ben Rosenfeld
cf5d768b33 tests: Change p2p_device_nfc_invite to use global interface
When testing P2P invitation flow, setting the NFC selector
should be done using the global control interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:35:29 +03:00
Ben Rosenfeld
cc259e2650 tests: Change p2p_device_misuses() to use group interface
Calling "DISASSOCIATE" should be done on the group interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:30:40 +03:00
Ilan Peer
6420643d45 tests: Skip some tests in P2PS when a dedicated P2P Device is used
Some tests in test_p2ps.py test a scenario where a separate P2P
group interface is not used. However, this is not a valid case
when a dedicated P2P Device interface is used, as in such a case
a separate group interface must be used.

Handle this by skipping such tests in case a dedicated P2P Device is
used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-05-07 21:19:38 +03:00
Ilan Peer
5cef80647e tests: Fix test_p2ps.py to save group results
Call group_form_result() whenever a new group is started, so that
group_ifname gets updated and later, the group can be removed when
needed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-05-07 21:17:31 +03:00
Ben Rosenfeld
09f60224a5 tests: Remove all P2P networks in call to reset
When resetting a device, remove all the P2P networks to prevent
unexpected behavior in following tests. This is needed for the case
where P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:14:31 +03:00
Ben Rosenfeld
6f96fdaefb tests: Change test_p2p_messages to use global interface
This is required for cases where P2P Device is used and the event
happens on the global interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:11:03 +03:00
Ben Rosenfeld
eb1d68eff0 tests: Change set_country() to use the global interface to get event
This is required for cases that multiple interfaces are used and the
event can happen on any of them, for example when a dedicated P2P Device
interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:09:29 +03:00
Ben Rosenfeld
91d3483273 tests: Change p2p_set_ssid_postfix to use the group interface for SSID
This is required for cases where thea P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:07:20 +03:00
Ben Rosenfeld
3d5b1a6452 tests: Fix test_ap_pmf to use own_addr
The tests used p2p_dev_addr that can be different from own_addr,
if a dedicated P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:02:37 +03:00
Jouni Malinen
6838452db8 tests: Invalid WMM Action frame
This is a regression test case for a AP mode WMM Action frame parsing
issue.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 18:26:50 +03:00
Jouni Malinen
b204753115 tests: WPS HTTP protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 18:26:50 +03:00
Oren Givon
2380d80493 tests: TDLS link status test
Add a test case for checking TDLS link status.

Signed-off-by: Oren Givon <oren.givon@intel.com>
2015-05-03 17:24:38 +03:00
Jouni Malinen
c53a3f29cd tests: IBSS RSN regression test for IBSS_RSN prior IBSS setup
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 17:15:45 +03:00
Jouni Malinen
f0174bff85 tests: Fix EAP-SIM/AKA protocol tests to use full header
Couple of the EAP-SIM/AKA protocol test cases were leaving out the
Reserved field. This was not intentional since these test cases were
targeting a specific Subtype processing instead of verifying truncated
header case (which is covered separately). Add the Reserved field to
allow the implementation to add an explicit, earlier check for this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 16:32:59 +03:00
Jouni Malinen
cb346b49d2 tests: Extend D-Bus test cases to cover separate P2P Device operations
Number of the P2P test cases through D-Bus commands were not prepared
for there being a separate group interface when the P2P Device concept
is used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-29 20:44:23 +03:00
Jouni Malinen
798c7951cf tests: ProxyARP with na_mcast_to_ucast=1
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-27 12:33:43 +03:00
Michael Braun
bbe9eddce0 tests: Change vlan_id back and forth
Enhance test ap_vlan_wpa2_radius_id_change to change the VLAN-ID
back as a last step. This ensures that the wpa_group for VLAN-ID 1
did not enter FATAL_FAILURE state during the test.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-04-26 16:56:22 +03:00
Jouni Malinen
f80fd58de6 tests: Check vlan_id information in STA output
In addition, this adds some delay between the authentication and data
connectivity test through the newly added VLAN and by doing so, makes
ap_vlan_wpa2_radius_id_change a bit more robust. It was possible for the
EAPOL-Key message 4/4 not having yet been processed by hostapd at the
time the data test started.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-26 15:59:19 +03:00
Michael Braun
bfcc073caf tests: Verify dynamic_vlan=required is honored with macaddr_acl=2
dynamic_vlan=required also applies to macaddr_acl=2 (RADIUS), especially
when used with WPA-PSK.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-04-25 10:28:19 +03:00
Jouni Malinen
2272f5aada tests: WPS AP iteration on no Selected Registrar and error case
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-24 17:55:33 +03:00
Jouni Malinen
cfbdb9958f tests: Increase wait timeout in autogo_m2d
The time before trying to associate with an AP that does not advertise
Selected Registrar TRUE is going to be incremented, so increase the
autogo_m2d timeout to avoid reporting incorrect errors due to missing
M2D events.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-24 17:55:32 +03:00
Jouni Malinen
9bbce25772 tests: D-Bus AddNetwork for AP mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-24 01:22:15 +03:00
Jouni Malinen
5bf30c6715 tests: wpa_supplicant INTERFACE_ADD/REMOVE with large number of vifs
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-24 01:22:15 +03:00
Jouni Malinen
f371869a96 tests: P2P protocol tests for too long variable length fields
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:19 +03:00
Michael Braun
515b176e9c tests: Verify RSN preauth with dynamic VLANs
This change add two new tests to verify hostapd operation when used with
VLANs. Both are based on pmksa_cache_preauth and enable dynamic VLANs,
pmksa_cache_preauth_vlan_used additionally uses a station with VID 1.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-04-13 17:08:10 +03:00
Jouni Malinen
1d0a917f36 tests: D-Bus BSS interface and WPS Type values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-13 15:09:23 +03:00
Jouni Malinen
138bf11852 tests: INTERFACE_ADD/REMOVE with vif without creation/removal
This is also a regression test for INTERFACE_ADD parsing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-04 11:02:22 +03:00
Jouni Malinen
febf575200 tests: EAP-TTLS with TLS session ticket enabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-01 12:57:11 +03:00
Jouni Malinen
0d33f5040f tests: EAP-PEAP/MSCHAPv2 with domain name
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-29 22:06:06 +03:00
Jouni Malinen
53f4ed68ee tests: WPA2-PSK AP with passphrase only in memory
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-28 11:08:31 +02:00
Jouni Malinen
b898a6ee72 tests: WPA2-Enterprise connection using EAP-pwd and NTHash
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-28 09:45:25 +02:00
Jouni Malinen
ce591c74bf tests: Make parallel-vm.py FAIL parser more robust
It looks like it was possible to receive an incomplete FAIL line and
break out from test execution due to a parsing error. Handle this more
robustly and log the error.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-26 22:20:35 +02:00
Jouni Malinen
25f2cb618c tests: INTERFACE_ADD/REMOVE with vif addition/removal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-26 22:20:35 +02:00
Jouni Malinen
8278138e67 tests: Verify OSEN BSS flag in scan results
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-25 16:05:35 +02:00
Jouni Malinen
05121d3564 tests: Change proxyarp_open LL src MAC check to match requirements
Now that there is a kernel patch for IPv6 ProxyARP that is capable of
using the non-AP STAs MAC address as the link layer source address in
NA, validate that behavior rather than the temporary check for BSSID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-24 20:33:33 +02:00
Jouni Malinen
a539d3f71f tests: Automatic reconnection on re-enabling temporarily disabled network
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-22 20:54:07 +02:00
Jouni Malinen
24b3b32316 tests: Remove debug print from ap_wpa2_psk_incorrect_passphrase
This development time debug print was forgotten into the test script.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-22 20:36:01 +02:00
Jouni Malinen
8aba435b16 tests: Make ap_vlan_wpa2_radius_id_change more robust
Wait for the 4-way handshake completion instead of assuming it gets done
in 0.1 seconds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 17:51:18 +02:00
Jouni Malinen
898c959a6f tests: P2P_SERVICE_DEL asp all
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 15:56:59 +02:00
Jouni Malinen
5f6ce5b503 tests: INTERWORKING_SELECT blocking SCAN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 15:56:59 +02:00
Jouni Malinen
97c6d0d873 tests: AP-STA-POSSIBLE-PSK-MISMATCH
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-19 13:18:44 +02:00
Jouni Malinen
a14a5f244a tests: Disable and re-enable hostapd interface
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-19 12:57:37 +02:00
Jouni Malinen
47af258687 tests: GET ip_addr_go
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 21:03:39 +02:00
Jouni Malinen
211bb7c5ea tests: WPA2-PSK-FT AP over DS and unexpected response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 16:36:37 +02:00
Jouni Malinen
de52a2e259 tests: Fix parallel-vm.py test case name parsing
The 'params' argument was not used at all. Use it as an alternative
means for setting the list of test cases to execute.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 12:12:01 +02:00
Jouni Malinen
4f76eb81e9 tests: Add --valgrind argument to parallel-vm.py
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 12:09:23 +02:00
Jouni Malinen
eb9c155498 tests: P2P autonomous GO and many clients (P2P IE fragmentation)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 10:58:17 +02:00
Jouni Malinen
d0cd00de6f tests: Verify wpa_supplicant AP mode events
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 10:14:47 +02:00
Jouni Malinen
f584b5a196 tests: Document dependency on python-crypto
Crypto.Cipher module is now needed to be able to run the 4-way handshake
protocol tests.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 23:47:02 +02:00
Jouni Malinen
e0c46c8e44 tests: Protocol testing for EAPOL-Key supplicant processing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 17:18:33 +02:00
Jouni Malinen
0860b2199f tests: Make ap_acs_40mhz more robust
Explicitly clear cached scan results on the AP interface before starting
ACS. This avoids issues where conflicting BSS entries from previously
executed test cases could affect channel selection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 17:02:40 +02:00
Jouni Malinen
68baa82cd2 tests: Add --short option for parallel-vm.py
This can be used to filter out test cases that take significantly longer
time to execute (15 seconds or longer). While this reduces testing
coverage, this can be useful to get a pretty quick coverage in
significantly faster time.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 12:23:39 +02:00
Johannes Berg
d2002f8334 tests: Allow running with arbitrary working directory
It's somewhat annoying that you can only run parallel-vm.py as
./parallel-vm.py, not from elsewhere by giving the full path,
so fix that by resolving the paths correctly in the scripts where
needed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-07 12:23:07 +02:00
Johannes Berg
4f06261bd9 tests: parallel-vm.py: Use argparse module
Instead of hand-writing a (positional) parser, use the argparse module.
This also gets us nice help output.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-07 12:23:04 +02:00
Jouni Malinen
4e979d9de6 tests: Make ap_remove_during_acs* more robust
These test cases need to use the previous-AP-on-correct-band workaround
similarly to test_ap_acs.py test cases for now to work with
mac80211_hwsim limitations on channel survey.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 00:00:08 +02:00
Jouni Malinen
d970337da7 tests: Make suite_b* test cases more robust
Explicitly clear the cfg80211 BSS cache at the beginning of these test
cases to avoid matching BSS flags against incorrect AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-06 23:18:46 +02:00
Jouni Malinen
45de328602 tests: More thorough cache clearing in ap_hs20_hidden_ssid_in_scan_res
It looked like cfg80211 BSS entry for the zero-length SSID could remain
after this test case. Stop the AP and scan twice with flush-cache option
to make this less likely to occur and cause issues to following test
cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-06 23:17:12 +02:00
Jouni Malinen
9cc223c2f5 tests: Make offchannel_tx_roc_gas more robust
It was possible for this test case to fail if cfg80211 BSS cache
included an entry for the same BSSID on another channel from an earlier
test case. Fix this by epxlicitly flushing the cache. In addition, use
scan_for_bss() to make the test less likely to fail in case of heavy CPU
load.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 17:03:06 +02:00
Jouni Malinen
46dea617ae tests: WPS PIN and iterate through APs without selected registrar
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 15:37:02 +02:00
Jouni Malinen
50c3825c6d tests: DFS with wpa_supplicant AP mode
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:25:16 +02:00
Jouni Malinen
19ec6070ff tests: Fix workaround for limited channel survey in mac80211_hwsim
The way the current channel survey is implemented in mac80211_hwsim
requires for the ACS test cases to be run immediately after the same
radio has been on the expected operating band. This was worked around in
one of the test cases and errors ignored in couple. Extend this
workaround to cover all the test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-03 16:01:52 +02:00
Jouni Malinen
9416e47f47 tests: Fix ap_vlan_wpa2_radius_id_change exception
This was supposed to be Exception("string") not "string".

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-03 15:40:19 +02:00
Johannes Berg
cba262e39b tests: Fix python typo
Clearly that should spell Exception.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03 15:38:01 +02:00
Jouni Malinen
00c35673fd tests: Allow --shuffle-tests to be used with parallel-vm.py
This can be used to get more random sequence of test case execution
into use when running multiple VMs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-03 09:47:25 +02:00
Jouni Malinen
fb7e0998b0 tests: P2P GO start with only 5 GHz band allowed
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-02 17:01:15 +02:00
Jouni Malinen
96cbb7b561 tests: Skip radius_acct_unreachable3 when not running under VM
It looks like the IP routing table changes used here to trigger
unreachability and following reachability of the server do not work very
well with full IP routing configuration, so run this test case only when
executed under vm-run.sh.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-02 16:30:13 +02:00
Jouni Malinen
bfc048b48f tests: P2P autonomous GO with large number of GO instances
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:53 +02:00
Jouni Malinen
58980654af tests: RADIUS server failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:52 +02:00
Jouni Malinen
5d695df5d1 tests: hostapd and get_station in multi-BSS configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:52 +02:00
Jouni Malinen
5ff53fd6dd tests: RADIUS failover and failed attempt to return to primary server
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:52 +02:00
Jouni Malinen
7c5658c661 tests: RADIUS client address specified
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:52 +02:00
Jouni Malinen
1b5664f0fb tests: RADIUS Accounting server unreachable and multiple STAs
This verifies behavior on reaching RADIUS_CLIENT_MAX_ENTRIES.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:52 +02:00
Jouni Malinen
48d9065f7d tests: RADIUS Accounting server initially unreachable, but then available
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:52 +02:00
Jouni Malinen
ec1c483de0 tests: Not ready for GO Negotiation (listen/search)
These test cases verify that P2P_FIND and P2P_LISTEN operation continues
after having replied to GO Negotiation Request frame for which we are
not yet ready (i.e., GO Negotiation Response with status=1).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:52 +02:00
Jouni Malinen
7041c16d5a tests: Open mode connection and SELECT_NETWORK to change network
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 15:56:11 +02:00
Jouni Malinen
6acca70536 tests: cfg80211 P2P Device and P2P_* command on incorrect interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 12:07:23 +02:00
Jouni Malinen
5de945fcc0 tests: cfg80211 P2P Device misuses
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 11:24:41 +02:00
Jouni Malinen
6d0b447464 tests: P2P_FIND with freq parameter to scan a single channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-28 22:06:24 +02:00
Jouni Malinen
dcd378ed2e tests: Make grpform_no_wsc_done more robust
It was possible for this test case to start a new group formation on
dev[1] while the first round was still going through the process of
processing group termination indication. That could result in the second
round failing unexpectedly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-28 16:57:03 +02:00
Jouni Malinen
abeea374a4 tests: RADIUS server connect() failing during startup
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-28 15:45:17 +02:00
Jouni Malinen
8412dd52d1 tests: Increase default VM memory from 128M to 192M
It looks like the 128M default memory size for the hwsim test setup was
not large enough to cover all the needs anymore. Some of the test cases
using tshark could hit OOM with that size. Increase the default
allocation to 192M to avoid this type of issues.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-25 19:02:43 +02:00
Jouni Malinen
0f74bd41c5 tests: 4-way handshake and the first msg 4/4 getting lost
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-23 15:36:49 +02:00
Jouni Malinen
52352802ee tests: Linux packet socket workaround and EAPOL RX in operational state
This verifies that the packet socket workaround does not get disabled if
EAPOL frames are processed during operation state (i.e., when processing
reauthentication/rekeying on a functional association).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-22 16:06:23 +02:00
Jouni Malinen
528a7d22d0 tests: VHT/HT preference in BSS selection
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-22 11:47:28 +02:00
Jouni Malinen
cfb5576d93 tests: Rename dmesg files to a unique name
This allows multiple dmesg files to be saved if a test case is executed
multiple times similarly to the other logfiles.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-21 16:07:53 +02:00
Johannes Berg
d0007ac9d7 tests: Add test to check disconnect in powersave
The kernel had two bugs (one in hwsim and one more important one in
mac80211) in this area, add a test to make sure we can disconnect
without any kernel issues while in powersave.

Also make sure that the TIM bit gets set and cleared again (by checking
with tshark.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-21 16:07:52 +02:00
Jouni Malinen
04bb845273 tests: Re-association to same BSS to toggle PMF status
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-19 16:37:12 +02:00
Jouni Malinen
4bcedaa400 tests: Re-sign expired test certificates
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-19 14:18:57 +02:00
Jouni Malinen
792eafa047 tests: Make wpas_mesh_password_mismatch more robust
It seems to be possible for dev2 (the one with incorrect password) to
stop retries before either dev0 or dev1 reports the authentication
failure event. For now, allow the test case pass if either dev0 or dev1
reports the event rather than requiring both to report this. The
expected behavior can be fine-tuned in the future if the reporting
behavior is modified to be more consistent.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-12 15:50:52 +02:00
Jouni Malinen
f245b45075 tests: Fix ap_{open,wpa2_psk}_wpas_in_bridge cleanup
Due to a copy-paste error, these test cases left 4addr mode enabled on
wlan5. This resulted in number of connect_cmd_* test cases failing if
executed after the wpas_in_bridge tests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 16:50:06 +02:00
Jouni Malinen
1c9838b388 tests: Remove temporary config file in wpas_config_file
The new wpa_supplicant configuration file writing style leaves behind
the temporary file (<filename>.tmp) if renaming fails. Clean that up in
the test case execution.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 14:57:30 +02:00
Jouni Malinen
eb88a5ba74 tests: hostapd and external ifconfig down + up
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 10:31:12 +02:00
Jouni Malinen
380f3a8ba1 tests: Make autogo_join_auto_go_neg more robust
This test cases used to fail if dev1 had seen dev0 as a GO in an earlier
test case, e.g., when running it after autogo_fail. Fix this by clearing
scan results on dev1 at the beginning of the test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-10 12:09:07 +02:00
Jouni Malinen
c5b535ed1d tests: hostapd and start_disabled=1
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 19:57:46 +02:00
Jouni Malinen
7ebc7e8fa6 tests: wpa_supplicant DUMP/GET global parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Jouni Malinen
2265376271 tests: INTERWORKING_ADD_NETWORK
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Jouni Malinen
9177b0a8c9 tests: Successful P2P_CONNECT-auto cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:59:57 +02:00
Jouni Malinen
d2b84e430c tests: P2P_CONNECT-auto not finding GO
This is a regression test for an earlier bug that resulted in using
freed memory after a P2P group interface was removed as part of
fallback-to-GO-Negotiation in P2P_CONNECT-auto.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:35:49 +02:00
Jouni Malinen
874057da4e tests: Make wpas_ctrl_many_networks more robust under valgrind
It is possible for a low powered CPU to take excessively long time to
delete 1000 network blocks when running under valgrind. This would have
resulted in the test case failing and the following reset operation
timing out which would then stop the test sequence completely.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:25:35 +02:00
Jouni Malinen
f77d6d4bd8 tests: Mesh authentication failure events
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:25:35 +02:00
Jouni Malinen
a0b3f8e2ff tests: Remove forgottend debug print from p2ps_connect_adv_go_persistent
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-07 16:29:22 +02:00
Jouni Malinen
c62bd5e44d tests: Remove forgotten debug print from grpform_pbc_overlap
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-07 15:38:29 +02:00
Ilan Peer
d821e2f294 tests: Use the global control interface in test_nfc_p2p.py
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
David Spinadel
bbcbbd3701 tests: Modify autogo_bridge test to use group interface
1. Add get_group_ifname() to wpasupplicant.py
2. Use the function to get the interface name for the bridge.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
4ef05faf43 tests: Modify test_p2p_discovery to use global and group interfaces
Modify the tests in test_p2p_discovery to use the global
control interface and group interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
da749dc579 tests: Use the group control interface in p2p_channel_avoid
Use the group control interface to wait for P2P-REMOVE-AND-REFORM-GROUP
as the event is a group event.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
d4f2ba749e tests: Use group control interface in autogo
P2P-PRESENCE-RESPONSE is a group event, and thus need
to use the group control interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
75826fc6e6 tests: Use global control interface in wpas_ctrl_global
Use the global control interface to set/get the status of the
P2P Device.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
c4668009d0 tests: Remove unnecessary use of sudo from test cases
run-tests.py is running as root, so sudo does not need to be used
anymore from within each test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
b638f70316 tests: Replace subprocess.call for rm with os.remove()
There is no need to use sudo and external rm to remove files now that
run-tests.py is required to run as root.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
592015c3c1 tests: Fix wpas_config_file after implementation change
The new wpa_supplicant configuration writing design (rename instead of
write to original file) did not fail with the symlink-to-self case, so
replace this with the config file being replaced with a directory. In
addition, get rid of unnecessary use of subprocess since run-tests.py is
running as root nowadays.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
4cfc46934d tests: IBSS with WEP and TKIP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-06 21:43:50 +02:00
Jouni Malinen
65013c9331 tests: ACS with acs_chan_bias parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-06 18:02:33 +02:00
Ilan Peer
1cb3ad7362 tests: Use global control interface in test_p2p_concurrency
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
2a9eb1494c tests: Use global control interface in test_p2p_service
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
e9986d8b0b tests: Modify test_p2p_discovery to use global control interface
1. Modify discovery_stop to use global control interface when calling
   P2P_FLUSH.
2. Modify p2p_listen_and_offchannel_tx to use the global control
   interface when waiting for P2P PD event.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Eliad Peller
a918e48af1 tests: Add printk tracer to trace-cmd
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-02-05 13:48:40 +02:00
Ben
d715738578 tests: Modify tests in test_ap_pmf to use own_addr()
Some of the tests used p2p_dev_addr() that can be different from
own_addr() if a dedicated P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-02-05 13:48:40 +02:00
Ben
3d8c7953e3 tests: Modify tests in test_hapd_ctrl to use own_addr()
Some of the tests used p2p_dev_addr() that can be different from
own_addr() if a dedicated P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-02-05 13:48:40 +02:00
Ben
1d21a5bee5 tests: Fix ap_wps_per_station_psk to use own_addr()
The test used p2p_dev_addr() that can be different from own_addr()
if a dedicated P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-02-05 13:48:40 +02:00
Ben
18945a8c8e tests: Fix ap_wpa2_psk_file to use own_addr
The test used p2p_dev_addr() that can be different from own_addr()
if a dedicated P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-02-05 13:48:40 +02:00
Matti Gottlieb
83e1bab022 tests: Fix destination address in ap_hs20_remediation_required_ctrl
Fix the destination address that is sent in the WNM-Notification to be
the BSS address opposed to the P2P address.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
36f2818784 tests: Use get_bss() with ifname in autogo
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
fb9cf82eb3 tests: Add option to specify ifname to get_bss()
This is needed for cases that the group interface differs from the main
interface, i.e., when a dedicated P2P Device interface is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
5270b2fbb7 tests: Use the global control interface in test_p2p_grpform
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:35 +02:00
Ilan Peer
c282b9b40e tests: Use global_request for SET commands in test_p2p_grpform
When the 'SET' command is used to configure parameters related to P2P
operation use the global control interface and not the per interface one
as otherwise the setting will only have effect on the interface and will
work if a dedicated P2P_DEVICE is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:38:10 +02:00
Ilan Peer
cef63d6b2f tests: Update group ifname in p2p_go_invite_auth
Once the connection is established need to call group_form_result() on
the invited device, as otherwise the group interface name is not updated
and the connectivity test is done with the main interface instead of the
group interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:38:10 +02:00
Ilan Peer
098a687ffb tests: Use global control interface in discovery_dev_id
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:38:10 +02:00
Ilan Peer
acd620258d tests: Modify autogo_legacy to use the group interface
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:38:10 +02:00
Ilan Peer
b0d697be91 tests: Use global control interface in wait_go_ending_session()
P2P_EVENT_GROUP_REMOVED is a global event, so use
wait_global_event() instead of wait_event().

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 12:50:44 +02:00
Jouni Malinen
644b24c6bb tests: Verify SD TX callback processing after P2P find is stopped
These are far from perfect since timing is quite difficult to match for
the case that behaved incorrectly. Anyway, it looks loke
p2p_service_discovery_peer_not_listening was able to hit the error now
and then, so this should be sufficient as a regression test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-04 20:47:14 +02:00
Jouni Malinen
c4f34de90d tests: P2PS and persistent group
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 17:00:56 +02:00
Jouni Malinen
12a793a606 tests: Increase grpform_ext_listen coverage
Include actual extended listen period in the test and confirm that the
device was available on a social channel during such period by using
non-social operating channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 16:43:02 +02:00
Jouni Malinen
2acd2985c6 tests: P2P_PROV_DISC error case
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 16:30:27 +02:00
Jouni Malinen
9406905384 tests: P2P listen channel optimization
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 16:22:59 +02:00
Jouni Malinen
2e6085c27b tests: OBSS scanning report processing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 13:26:27 +02:00
Rajiv Ranjan
5095a6b6fc tests: P2P services
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:42:24 +02:00
Jouni Malinen
364e28c982 tests: Restore p2ps config_method in dbus_get_set_wps
This test case is modifying the list of enabled config_method values and
needs to restore "p2ps" option that is included by default. Without
this, P2PS executed after dbus_get_set_wps could fail.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Jouni Malinen
f4cd0f6454 tests: EAP-PEAP/MSCHAPv2 password failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-01 17:37:35 +02:00
Jouni Malinen
54f2cae2e6 tests: Make *_key_lifetime_in_memory more robust
It was possible for the GTK-found-in-memory case to be triggered due to
a retransmission of EAPOL-Key msg 3/4 especially when running test cases
under heavy load (i.e., timeout on hostapd due to not receiving the 4/4
response quickly enough). Make this false failure report less likely by
waiting a bit longer after the connection has been completed before
fetching the process memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 18:06:06 +02:00
Jouni Malinen
a1512a0cc7 tests: wpa_supplicant and station interface in a bridge
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 17:28:08 +02:00
Jouni Malinen
db5f6b2ca3 tests: RSN pre-authentication OOM in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 13:45:52 +02:00
Jouni Malinen
7afa678033 tests: RSN pre-authentication timeout
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 13:35:31 +02:00
Jouni Malinen
d2432b8b7e tests: PMKSA cache size limit in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 13:26:46 +02:00
Jouni Malinen
19879b4572 tests: Invalid NFC NDEF record handling
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 02:00:02 +02:00
Jouni Malinen
55c430b63c tests: Add capture file validation for IPv6 in proxyarp_open
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 21:55:46 +02:00
Jouni Malinen
efd0a6fbf1 tests: Add capture file validation for IPv4 in proxyarp_open
Verify that the expected frames were seend and unexpected frames
weren't.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
210a4f6a13 tests: Add another bridge port to proxyarp_open
Use another AP instance as a separate bridge port in the proxyarp_open
test cases to increase testing coverage for kernel proxyarp
functionality.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
87f0ede914 tests: Add brctl showmacs output to proxyarp_open test cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
9934ee1967 tests: Run the proxyarp_open test case both with and without ebtables
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
2076846cc4 tests: Fix tshark refactoring
Commit 2e1d7386e2 ('tests: Refactor tshark
running') added a helper function for running tshark. However, it did
not use the filter argument correctly, added an extra -Tfields on the
command line, and failed to use global variable. In practice, this ended
up disabling all the tshark sniffer checks. Fix that by using the filter
argument from the caller and marking the _tshark_filter_arg global.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
3a4bace428 tests: RADIUS server changing VLAN ID assignment
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 01:11:56 +02:00
Jouni Malinen
3b86e9d52c tests: PMKSA caching OOM error cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 00:14:57 +02:00
Jouni Malinen
915135e055 tests: hostapd OOM loop tests for WPA2-PSK and WPA2-EAP connection
These verify number of previously uncovered error paths.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 22:33:25 +02:00
Jouni Malinen
cdebd24db6 tests: OLBC AP table error cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 21:11:41 +02:00
Jouni Malinen
496a7a6ff9 tests: hostapd OOM loop targeting RADIUS accounting
The hostapd_oom_wpa2_eap test case did not always catch these code
paths, so add a variant of that test case explicitly targeting RADIUS
functions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 20:52:30 +02:00
Jouni Malinen
2c528e9690 tests: cfg80211 DEL_STATION issued externally to hostapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 16:26:31 +02:00
Jouni Malinen
4a4cd04cad tests: RADIUS MAC ACL and accounting enabled
This ends up using the special User-Name = STA MAC address case for
Accounting-Request. In addition, add Chargeable-User-Identity for one of
the STAs.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 15:55:48 +02:00
Jouni Malinen
ef318402f6 tests: EAP-MSCHAPv2 server out-of-memory cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-28 16:17:25 +02:00
Jouni Malinen
95a15d793e tests: EAP-GTC server error cases
In addition, no-password-configured coverage extended to EAP-MD5 and
EAP-MSCHAPv2 as well.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-28 15:59:36 +02:00
Jouni Malinen
467775c5ac tests: Pending EAP peer processing with VENDOR-TEST
This extends the VENDOR-TEST EAP method peer implementation to allow
pending processing case to be selected at run time. The
ap_wpa2_eap_vendor_test test case is similarly extended to include this
option as the second case for full coverage.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-28 13:09:31 +02:00
Jouni Malinen
a08fdb17aa tests: EAPOL supplicant invalid frame handling
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-28 13:09:31 +02:00
Jouni Malinen
48bb2e68c0 tests: STATUS-VERBOSE
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-28 13:09:31 +02:00
Jouni Malinen
37551fe374 tests: Suite B 192-bit profile
This adds a Suite B test case for 192-bit level.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:55 +02:00
Jouni Malinen
4113a96bba tests: Complete Suite B 128-bit coverage
Enable BIP-GMAC-128 and enforce Suite B profile for TLS.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:55 +02:00
Jouni Malinen
f918b95b9d tests: Fix ft_psk_key_lifetime_in_memory with new PTK derivation debug
PTK is not printed out anymore as a single entry, so fetch KCK, KEK, and
TK separately.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:55 +02:00
Jouni Malinen
287eb3f9d7 tests: Group management frame cipher suites
This extends testing coverage of PMF group management cipher suites to
include all the cases supported by the driver (existing BIP =
AES-128-CMAC and the new BIP-GMAC-128, BIP-GMAC-256, BIP-CMAC-256).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-24 19:37:42 +02:00
Jouni Malinen
fba25c99a5 tests: Make ap_wps_er_pbc_overlap more robust
Reorder scanning in a way that allows the ER behavior to be more
predictable. The first Probe Request report is for a previously received
frame on the AP and this new sequence avoids leaving either of the PBC
test STAs to be that one.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-23 00:52:56 +02:00
Jouni Malinen
90ad11e625 tests: Make active scans more robust
This makes testing under very heavy load or under extensive kernel
debugging options more robust by allowing number of test cases to scan
multiple times before giving up on active scans. The main reason for
many of the related test failures is in Probe Response frame from
hostapd not getting out quickly enough especially when multiple BSSes
are operating.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-23 00:52:40 +02:00
Jouni Malinen
1f53fe0310 tests: P2P group formation using PBC multiple times in a row
This verifies that PBC session overlap detection does not get indicated
when forming the group with the same peer multiple times.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-22 20:53:03 +02:00
Jouni Malinen
180a858f76 tests: P2P_SERV_DISC_CANCEL_REQ during query
This is a regression test case for a specific sequence that could result
in wpa_supplicant NULL dereference when a SD request is cancelled before
the SD Request TX status callback has been processed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-22 15:55:36 +02:00
Jouni Malinen
a60dbbce44 tests: ANQP-QUERY-DONE event
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-20 02:26:21 +02:00
Jouni Malinen
31b7ecb6c8 tests: P2P NFC invitiation with driver using cfg80211 P2P Device
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-20 01:57:59 +02:00
Jouni Malinen
2dc18e9a26 tests: Error handling for scan trigger failure cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-19 20:25:22 +02:00
Jouni Malinen
e60be3b3d4 tests: WPS registrar learning configuration from WPA+WPA2 AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-19 18:39:13 +02:00
Jouni Malinen
059bcc4782 tests: Increase hostapd out-of-memory loop coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-19 02:35:43 +02:00
Jouni Malinen
214457de15 tests: WPA + WEP configuration getting rejected
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-19 01:11:36 +02:00
Jouni Malinen
9eadcfbf06 tests: Add step-by-step guide for setting up test framework
This set of notes provides information on how virtual guess OS can be
used to run the mac80211_hwsim test cases under any host OS. The
specific example here uses Ubuntu 14.04.1 server as the starting point
and lists the additional packages that need to be installed and commands
that can be used to fetch and build the test programs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 18:11:11 +02:00
Jouni Malinen
a66d2248a0 tests: Close wlan5 control interface monitor more explicitly
There were couple of common cases where the control interface for the
dynamic wpa_supplicant instance could have been left in attached state
until Python ends up cleaning up the instance. This could result in
issues if many monitor interface events were queued for that attached
socket. Make this less likely to cause issues by explicitly detaching
and closing control interfaces before moving to the next test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 17:13:55 +02:00
Jouni Malinen
7f08b2f91d tests: Make WNM Sleep Mode tests more robust
It was possible for the Action frame used for entring WNM Sleep Mode to
get dropped on the AP side due to it arriving prior to having processed
EAPOL-Key message 4/4 due to a race condition between Data and
Management frame processing paths. Avoid this by waiting for
AP-STA-CONNECTED event from hostapd prior to trying to enter WNM Sleep
Mode. In addition, make the check for the STA flag change more robust by
allowing the wait to be a bit longer with a loop that terminates as soon
as the flag has changed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 15:58:05 +02:00
Jouni Malinen
7cc9a81f1e tests: Make PMKSA caching tests more robust
When the STA is forced to disconnect immediately after completion of
4-way handshake, there is a race condition on the AP side between the
reception of EAPOL-Key msg 4/4 and the following Deauthentication frame.
It is possible for the deauthentication notification to be processed
first since that message uses different path from kernel to user space.

If hostapd does not receive EAPOL-Key msg 4/4 prior to deauthentication,
no PMKSA cache entry is added. This race condition was making the test
cases expecting PMKSA caching to work to fail every now and then. Avoid
this issue by waiting for AP-STA-CONNECTED event from hostapd. This
makes sure the PMKSA cache entry gets added on the AP side.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 15:47:56 +02:00
Jouni Malinen
d4155eb78a tests: Add some more time for olbc_ht update in olbc_5ghz
It looks like this test case is failing every now and then, so add some
more time for the olbc_ht value to get updated before reporting a
failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:55:49 +02:00
Jouni Malinen
b4de353c85 tests: Import gobject in a way that allows failures
It looks like the gobject module does not get installed by default for
Python at least on Ubuntu server, so modify the D-Bus test case files to
import this in a way that allows other test cases to be run even without
gobject module being installed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:50:20 +02:00
Jouni Malinen
57f08b3f3a tests: Make ap_anqp_sharing more robust
This test case uses get_bss() with a BSSID to find a BSS entry. That can
result in failures if there are multiple BSS entries in wpa_supplicant
BSS table for the same BSSID, e.g., due to an earlier hidden SSID test
case. Explicitly clear the cfg80211 and wpa_supplicant scan caches at
the beginning of this test case to make it less likely for earlier test
cases to trigger a failure here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:50:20 +02:00
Jouni Malinen
296186c006 tests: Make ap_mixed_security more robust
This test case uses get_bss() with a BSSID to find a BSS entry. That can
result in failures if there are multiple BSS entries in wpa_supplicant
BSS table for the same BSSID, e.g., due to an earlier hidden SSID test
case. Explicitly clear the cfg80211 and wpa_supplicant scan caches at
the beginning of this test case to make it less likely for earlier test
cases to trigger a failure here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:50:20 +02:00
Jouni Malinen
092ac7bb0e tests: Hotspot 2.0 ANQP fetch with hidden SSID BSS entry
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:50:20 +02:00
Jouni Malinen
3dacd58b0d tests: Write BSS table to debug log in ap_mixed_security
This makes it easier to debug test failures in BSS entry flags field.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 17:22:38 +02:00
Jouni Malinen
7e3a6c9e21 tests: Mark proxyarp_open as skip if traffic test fails
This step requires kernel changes that are not yet in upstream Linux
tree, so mark this as skip rather than failure for now.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 17:15:42 +02:00
Jouni Malinen
0258cf1006 tests: Clean up ap_wpa2_eap_aka_ext
Use a loop over set of test values instead of duplicated functionality
implemented separately for each case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 17:09:46 +02:00
Jouni Malinen
584e4197bd tests: Make ap_wpa2_eap_aka_ext faster and more robust
Use SELECT_NETWORK instead of REASSOCIATE for the first reconnection to
avoid unnecessary long wait for temporary network disabling to be
cleared. In addition, wait for the disconnect event after issuing the
DISCONNECT commands to avoid issues due to any pending events during the
immediately following reconnection attempt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 16:59:40 +02:00
Jouni Malinen
27f527e0e2 tests: ap_hs20_fetch_osu: Print osu-providers.txt in debug log
This makes it easier to figure out what happened if the test case fails
due to not finding all the needed OSU-PROVIDER information.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 16:03:43 +02:00
Jouni Malinen
a4a15cf1f9 tests: Skip some scan tests if iw does not support scan flush
The external cfg80211 scan flushing operation requires a relatively
recent iw version and not all distributions include that. Avoid false
failure reports by marking these test cases skipped if the iw command
fails.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 13:05:34 +02:00
Jouni Malinen
e246d7d5b3 tests: Fix test skipping for some DFS/VHT cases
Due to a typo and missing hapd variable initialization, some of the DFS
and VHT test cases were marked as failures even though they were
supposed to be marked as skipped in case the kernel and wireless-regdb
did not have sufficient support for these modes.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 13:04:11 +02:00
Jouni Malinen
fb9adae466 tests: Fix dbus_probe_req_reporting_oom if already registered
If dbus_probe_req_reporting was run before dbus_probe_req_reporting_oom,
the SubscribeProbeReq() method succeeded since the memory allocation
that was supposed to fail in the OOM test case was not even tried.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 12:39:00 +02:00
Jouni Malinen
90b10d4edd tests: EAP-TNC fragmentation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 12:12:33 +02:00
Jouni Malinen
ee9533eb0e tests: EAP-MD5 server error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 12:02:11 +02:00
Jouni Malinen
802bf82482 tests: Add optional -1 argument to parallel-vm.py
This can be used to skip rerunning of failed test cases
(e.g., with "./parallel-vm.py 1 -1 <test case>").

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 11:28:46 +02:00
Jouni Malinen
e912e4bc92 tests: Interworking auto_interworking=1 with mismatching BSS
This is a regression test case to detect a failure that resulted in an
up to five second busy loop through wpa_supplicant_fast_associate() when
interworking_find_network_match() and wpa_supplicant_select_bss() get
different matching results.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 01:53:44 +02:00
Jouni Malinen
6ace81ea77 tests: Disconnect-Request with no session identification attributes
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-16 16:16:28 +02:00
Jouni Malinen
9921689759 tests: Use a helper function to send and check RADIUS DAS messages
No need to have this same sequence of steps duplicated in multiple
places.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-16 16:14:54 +02:00
Jouni Malinen
05dad77c8f tests: RADIUS DAS and Disconnect-Request removing PMKSA cache entry
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-16 16:07:52 +02:00
Jouni Malinen
e94a3f626d tests: RADIUS DAS with Acct-Multi-Session-Id
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-16 13:10:48 +02:00
Jouni Malinen
9142b4dd45 tests: Disconnect-Request multi-session-match
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-16 12:50:16 +02:00
Jouni Malinen
c2b48088f6 tests: Fix radius_das_disconnect match + non-match case
If Calling-Station-Id matches, but CUI does not, NAS is expected to
reject the request instead of accepting it. Verify that Disconnect-NAK
is returned for this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-16 12:50:16 +02:00
Jouni Malinen
201c9ad77f tests: STA not getting response to SA Query
This verifies that wpa_supplicant reconnects if PMF is enabled,
unprotected Deauthentication/Disassociation frame is received, and the
AP does not reply to SA Query.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-16 01:13:59 +02:00
Jouni Malinen
e1f8fe8851 tests: INTERWORKING_CONNECT after having found hidden SSID AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-15 12:29:02 +02:00
Jouni Malinen
061cbb258f tests: domain_match checking against server certificate
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 15:45:18 +02:00
Jouni Malinen
2099fed400 tests: dbus_connect_eap to verify dNSName constraint configuration
This verifies that Certification signals include the expected
information on peer certificates and that dNSName constraint can be
configured based on that and is working both in matching and not
matching cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 15:45:18 +02:00
Jouni Malinen
496c4e45d8 tests: Subset of VHT functionality on 2.4 GHz
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-14 01:12:56 +02:00
Jouni Malinen
615d8a9705 tests: Add room for more vendor elems in wpas_ctrl_vendor_elem
This test case was verifying that the first unused VENDOR_ELEM value
above the current maximum is rejected. That makes it a bit inconvenient
to add new entries, so increase the elem value to leave room for new
additions without having to continuously modify this test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 01:12:56 +02:00
Jouni Malinen
37b4a66ce6 tests: Valid OCSP response with revoked and unknown cert status
This increases testing coverage for OCSP processing by confirming that
valid OCSP response showing revoked certificate status prevents
successful handshake completion. In addition, unknown certificate status
is verified to prevent connection if OCSP is required and allow
connection if OCSP is optional.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
279a0afffb tests: Generate a fresh OCSP response for each test run
GnuTLS has a hardcoded three day limit on OCSP response age regardless
of the next update value in the response. To make this work in the test
scripts, try to generate a new response when starting the authentication
server. The old mechanism of a response without next update value is
used as a backup option if openssl is not available or fails to generate
the response for some reason.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
0ff7afbc42 tests: Verify mesh support for wpas_add_set_remove_support
This test case fails if wpa_supplicant is built without mesh support, so
need to check for this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
2f0347954a tests: Check mesh capability based on the modes capabilities list
This is more robust than checking the driver capability because it is
also possible for the wpa_supplicant build to be configured without mesh
support regardless of whether the driver supports it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
b9749b6aaa tests: Verify that SAE is supported for test cases requiring it
This makes it more convenient to run tests with wpa_supplicant builds
that do not support SAE (e.g., due to crypto library not providing
sufficient functionality for this).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
4bf4e9db86 tests: Skip ap_wpa2_eap_ttls_server_cert_hash if probing not supported
The ca_cert="probe://" functionality is currently supported only with
OpenSSL.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
62750c3e80 tests: Use RSA key format in ap_wpa2_eap_tls_blob
This format as a DER encoded blob is supported by both OpenSSL and
GnuTLS while the previous OpenSSL specific format did not get accepted
by GnuTLS.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
24579e7047 tests: Split domain_suffix_match test cases based on match type
With GnuTLS, domain_suffix_match is currently requiring full match, so
split the test cases in a way that can be reported more cleanly as PASS
or SKIP based on TLS library behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
524c6c33bc tests: Add ca_cert to username/password Hotspot 2.0 credentials
Proper configuration should be used here to get server validation
enabled, so update the test cases to provide the ca_cert parameter. This
was included in number of existing test cases, but not all.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
506b2f05f2 tests: Split subject_match and altsubject_match to separate test cases
These parameters are supported only with OpenSSL, so split any test case
that used those for a successful connection into two test cases. Skip
all test cases where these are used without the selected TLS library
supporting them to avoid reporting failures incorrectly. Though, verify
that subject_match and altsubject_match get rejected properly if TLS
library does not support these.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
3b51cc6359 tests: Skip EAP-pwd and EAP-FAST test cases if not supported
Check wpa_supplicant EAP capability and skip EAP-pwd and EAP-FAST test
cases if the build did not include support for these. This is cleaner
than reporting failures for such test cases when the selected TLS
library does not support the EAP method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
a783340d04 tests: Skip OpenSSL cipher string tests with other TLS libraries
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
37d6135507 tests: Increase altsubject_match testing coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-11 00:27:01 +02:00
Jouni Malinen
c2096d9981 tests: bssid_blacklist and bssid_whitelist
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
70437ae55a tests: Drop mesh_ht_mode parameter from mesh test cases
This network profile parameter will be removed with the cleanup that
makes mesh use shared functions for setting channel parameters. That
will allow HT to be enabled automatically based on driver capabilities.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
de1d5049dc tests: Mesh in 5 GHz band
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Johannes Berg
2e1d7386e2 tests: Refactor tshark running
Refactor the code to run tshark into its own submodule. This allows
even remembering whether -Y or -R needs to be used for filtering.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-10 00:53:57 +02:00
Jouni Malinen
0e126c6dca tests: Out-of-memory cases for D-Bus operations
This increases testing coverage on various error paths.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-09 02:46:26 +02:00
Jouni Malinen
795b6f57a8 tests: Additional D-Bus error path coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-09 02:32:15 +02:00
Jouni Malinen
cd9548c02f tests: Add out-of-memory loop tests for hostapd startup
These test cases run hostapd interface setup multiple times with
TEST_ALLOC_FAIL commands triggering memory allocation failures one by
one at each possible location in the setup sequence. Effectively, these
test cases will hit most error paths for memory allocation issue cases
(i.e., only the cases requiring more than one allocation failure in a
sequence are not covered).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:48 +02:00
Jouni Malinen
f7af5a48f4 tests: hostapd BSS addition failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:48 +02:00
Jouni Malinen
fff95bb614 tests: hostapd interface setup and memory allocation failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:48 +02:00
Jouni Malinen
f12240a371 tests: Memory allocation failure in wpa_supplicant blacklist
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:48 +02:00
Jouni Malinen
81e787b750 tests: Convert test skipping to use exception
Instead of returning "skip" from the test function, raise the new
HwsimSkip exception to indicate a test case was skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:47 +02:00
Johannes Berg
9c8779daf6 tests: Use rfkill python module
Instead of calling the rfkill binary, use the built-in module.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08 20:56:54 +02:00
Johannes Berg
bd31b92a68 tests: Add rfkill module
This can be used instead of invoking the rfkill binary.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08 20:56:47 +02:00
Jouni Malinen
6a964b7560 tests: Make scan_random_mac more robust
There is a race condition between wlantest having received and written
the sniffer log and this test case using tshark to process it. Wait one
second before running tshark to make it less likely to get truncated
results that can result in the test case failing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-07 16:31:22 +02:00
Jouni Malinen
51c5aeb42a tests: Convert "hwsim-SKIP" exception to use a custom class
This makes the design a bit cleaner for catching the exceptions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-07 16:31:22 +02:00
Jouni Malinen
910eb5b525 tests: Import dbus module in a cleaner way
There is no need to use prepare_dbus() function to check whether the
dbus module can be imported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-07 13:29:25 +02:00
Jouni Malinen
c975e1c1da tests: Additional bgscan coverage
Verify error cases in bgscan module parameters. Increase learn bgscan
module coverage with parsing of the saved data and probe frequency
selection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-06 02:49:13 +02:00
Jouni Malinen
8aeb6e3dbc tests: MAC_RAND_SCAN with valid and invalid arguments
This verifies that random MAC address is used as requested in Probe
Request frames.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-04 23:06:58 +02:00
Jouni Malinen
5434f07c20 tests: TDLS channel switching
Verify correct behavior with invalid commands. In addition, allow minor
mac80211_hwsim modifications to be used to enable testing of the driver
interface to enable and disable channel switching.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-04 21:46:38 +02:00
Eliad Peller
41bf76447b tests: WMM-AC reassociation-to-same-BSS test
Make sure the tspecs are kept on reassociation to the same BSS.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-01-04 18:59:07 +02:00
Eliad Peller
bc32f830f4 tests: wmm_ac_status and roaming case with WMM-AC
Make sure the wmm_ac_status command reflects correctly the existing
tspecs after add_ts/del_ts commands. Add a new test to verify all tspecs
are removed on roaming (while FT is not used).

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-01-04 18:57:23 +02:00
Jouni Malinen
750904dd42 tests: Extend EAP key lifetime in memory to cover MSK and EMSK
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-03 15:49:57 +02:00
Jouni Malinen
ce8ca2f9a0 tests: Make wpas_mesh_max_peering more robust
The previous version was enabling all three stations at the same time
and left dev[1] and dev[2] competing on getting connected with dev[0]
that allowed only one pairing. This was not exactly robust and the pass
criteria depended on an extra event from either dev[1] or dev[2]. Fix
that by first connecting dev[0] and dev[1] and only after that, start
dev[2]. This allows proper validation of both the peering limit on
dev[0] and no extra event on dev[2].

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
29bac7cb89 tests: Make scan_hidden more robust under heavy CPU load
It is possible for the Probe Response frame wait to time out when active
scanning is used under heavy CPU load. Make this test case more robust
by trying multiple times before declaring the scan for a hidden SSID to
have failed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
2ec82e67c1 tests: wpa_supplicant D-Bus interface
This adds new files with test cases to verify both the old and new
wpa_supplicant D-Bus interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
b0839232fa tests: Enable wpa_supplicant D-Bus support for hwsim tests
This allows automated testing of the wpa_supplicant D-Bus interface. The
instance controlling wlan0 registers with D-Bus if dbus-daemon was
started successfully. This is only used in VM testing, i.e., not when
run-tests.sh is used on the host system with D-Bus running for normal
system purposes.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
5b3c40a65b tests: Verify that wpa_supplicant clears keys from memory
Check that PMK and PTK and not left in memory (heap or stack)
unnecessarily after they are not needed anymore.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-30 10:37:02 +02:00
Jouni Malinen
13113d127c tests: Filter out extra files from codecov reports
wpa_cli and hostapd_cli are not currently tested for code coverage, so
filter the files specific to those components away from the code
coverage reports. *_module_tests.c are not included in normal builds, so
drop them as well. In addition, drop the system header file (byteswap.h)
that gets somehow unnecessarily included in the reports for couple of
lines.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 18:27:23 +02:00
Jouni Malinen
7fe84009f8 tests: Reorder build.sh operations
This leaves the build tree with valid wpa_supplicant object files in the
end and makes it a bit easier to do additional custom builds when
needed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
185275228d tests: Use QUIET=1 option to make build.sh output much shorter
Report only fatal errors when building binaries for hwsim testing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
31705bf4fc tests: Skip mesh test cases if kernel does have CONFIG_MAC80211_MESH
Previously, these test cases were marked as failures, but it is nicer to
mark as skipped if the kernel does not include support for mesh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
e2a8db7785 tests: Report missing erp support more nicely in wpas_ctrl_get_capability
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
84512f8c9b tests: Support older tshark versions
The -Y command line argument may need to be replaced with -R when an
older tshark version is used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
8c6f6ac100 tests: Allow DFS test cases to be skipped
Some of the newer dfs_radar* test cases did not allow hostapd
startup to fail. Since these require relatively recent kernel
support, mark the test cases with skip rather than fail based
on that step failing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
752d58c775 tests: Allow SMPS test case to be skipped
ap_ht_smps needs relatively recern kernel support, so allow it to be
skipped rather than claimed as failure, in case hostapd startup fails.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:04 +02:00
Jouni Malinen
6532a84ed3 tests: Fix --codecov cases to find correct wpa_cli/hostapd_cli
It was possible for the separate builds to not include
wpa_cli/hostapd_cli in the default location. Make sure hostapd_cli gets
built for --codecov cases and update both WPACLI and HAPDCLI paths to
match the alternative location.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:04 +02:00
Jouni Malinen
de677292d5 tests: Verify that hostapd-as-RADIUS-server started
Large number of test cases will fail if hostapd fails to start as the
RADIUS server. To make this more obvious, verify that the RADIUS server
instance is running and do not even start test execution if the setup if
not work properly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:21:00 +02:00
Jouni Malinen
ed8a1fa496 tests: Limit number of failed test cases in the curses output
It was possible for the scr.addstr() operations to fail and terminate
parallel-vm.py if the number of failed test cases increased beyond what
fits on the screen.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:21:00 +02:00
Jouni Malinen
c715b31f18 tests: Clear active PBC mode from cfg80211 BSS table in p2p_channel
This reduces number of test combinations in which PBC session overlap
could have been indicated incorrectly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
dd859e20ac tests: Make p2p_channel test cases more robust
Wait for a CTRL-EVENT-REGDOM-CHANGE even before returning from
set_country() to avoid issues with test operations being executed before
all components have had chance to update their regulatory domain
information. Some of these test cases could fail under heavy load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
1f4de34ec1 tests: Maintain test result counters through the run
This avoids having to go through the full output buffer from each
VM for each update during a test run.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
8041102874 tests: Process VM stdout output in full lines
Merge partial lines together before processing them in parallel-vm.py.
This avoids issues in cases where the stdout read gets split into pieces
that do not include the full READY/PASS/FAIL/SKIP information. In
addition, strip unnecessary whitespace (mainly, '\r') from the log
lines.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
1942b68172 tests: Disable terminal echo for stdin control (-i)
This makes vm-run.sh output cleaner to parse for parallel-vm.py.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
2e0d48e5c8 tests: Do not print to stdout during test execution
This cleans up vm-run.sh output and makes information more easily
available from the *.log files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
d3fb9c1403 tests: Add debug logging for parallel-vm.py
parallel-vm.log is now written with details of test execution steps and
results. This makes it easier to debug if something goes wrong in VM
monitoring. The --debug option can be used to enable verbose debugging.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:36:51 +02:00
Jouni Malinen
3eb1db0377 tests: Retry failed cases automatically in parallel VM run
parallel-vm.py is now retrying failed cases once at the end of the run.
If all the failed test cases passed on the second attempt, that is noted
in the summary output. Results are also indicated as the exit value from
the run: 0 = all cases passed on first run, 1 = some cases failed once,
but everything passed after one retry, 2 = some cases failed did not
succeed at all.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 22:25:29 +02:00
Jouni Malinen
a628eeb42b tests: Add more long duration test cases to parallel-vm.py list
This adds the remaining test cases that took more than 15 seconds to run
into the list of test cases to run at the beginning of the execution to
avoid these being left at the end when only some of the VMs may be
running.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 20:34:13 +02:00
Jouni Malinen
6d930a1eef tests: Optimize ap_qosmap test cases
Avoid unnecessary DATA_TEST_CONFIG calls and wlantest_cli invocations to
speed up the test cases. This drops ap_qosmap execution time from about
14 seconds to under 3 seconds.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 17:46:34 +02:00
Jouni Malinen
4905f1ebfe tests: Optimize multi_check() waits in ap_bss_add* and ap_multi_bss*
There is no need to wait for the longer fixed duration for each STA when
an event message or an earlier wait for another STA can be used instead.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 17:20:18 +02:00
Jouni Malinen
610cfff5d7 tests: Make scan_hidden* more robust
Clear cfg80211 BSS table more carefully after the scan_hidden* test
cases. At least scan_hidden_many could have left behind a hidden SSID
entry that could cause problems for following scan_bss_operations test
case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 16:15:11 +02:00
Jouni Malinen
e0cfd223c0 tests: Fix mesh no_auto_peer=1 test cases to allow enough time for retry
If the initial Authentication frame was too early for the peer (i.e.,
NEW_PEER_CANDIDATE event arrived only after the Authentication frame),
wpas_mesh_open_no_auto and wpas_mesh_secure_no_auto test cases were
failing since they waited only for 10 seconds for the connection to be
completed while the retry timer was set to 10-20 seconds on the
authenticator side.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 13:10:22 +02:00
Jouni Malinen
9828b70ebd tests: Fix wpas_ctrl_data_test with Linux 3.19-rc1
The kernel commit 'packet: make packet_snd fail on len smaller than l2
header' started rejecting <= 14 octet raw packet socket transmission.
This test case was testing with 14 ocets and that is now rejected by the
kernel. While this may be a kernel side issue, use one octet longer test
data for now to avoid undesired FAIL cases in hwsim tests.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 12:27:14 +02:00
Jouni Malinen
b2eb3fe21c tests: Fix ap_ht_40mhz_intolerant_ap
The previous design did not actually break from the wait loop when the
AP changed back to 40 MHz channel and as such, ended up waiting the full
30 second time. Furthermore, the five second delay time for returning
back to 40 MHz was not sufficiently long to test behavior correctly
since the STA did not have any chances of returning the next coex report
before the AP had returned to 40 MHz. Increase the AP wait time to 15
seconds so that the once per 10 seconds OBSS scan from the STA gets in
before changing back to 40 MHz channel (after the 40 MHz intolerant AP
gets disabled).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 22:07:54 +02:00
Jouni Malinen
6ac593ec47 tests: Optimize run-tests.py test case dict iteration
Use a single iteration through the module dictionary rather than
iterating over the keys and separately fetching values to get the
function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 20:08:11 +02:00
Jouni Malinen
4cfe369b98 tests: Optimize stop.sh wait times
There is no need to wait for fixed 0.5 seconds for the processes to
exit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 19:37:08 +02:00
Jouni Malinen
b350009f8c tests: Optimize start.sh execution time
There is no need to wait for one extra second to chown log files when
running as root which is always the case in VM execution.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 19:22:42 +02:00
Jouni Malinen
a69d0cdc72 tests: Merge grpform_cred_ready_timeout test cases into a single one
These test cases had a long 120 seconds wait for the GO Negotiation
initiator to time out. This can be done using two devices in parallel to
save two minutes from total test execution time.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 15:54:30 +02:00
Jouni Malinen
9be2b811d4 tests: Mesh max peering limit
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 11:53:02 +02:00
Jouni Malinen
4b9481bcd8 tests: Remove unnecessary wrap_wpas_mesh_test() complexity
This function did not seem to do anything else apart from making it less
obvious that hwsim_utils.test_connectivity() is called.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 11:52:54 +02:00
Jouni Malinen
8b2600329f tests: Mesh beacon_int parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 23:45:29 +02:00
Jouni Malinen
5554fbef46 tests: Make parallel VM start a bit more resource friendly
Wait one second between each kvm start to avoid hitting large number of
processes trying to start in parallel. This allows the VMs to be started
more efficiently for parallel-vm.py runs with large number of VMs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 22:04:54 +02:00
Jouni Malinen
b3f4134912 tests: Clear cfg80211 BSS table at the end of scan_hidden
It was possible for the hidden SSID entry to leak into following test
cases and result in failures, e.g., in this sequence:

scan_hidden
scan_reqs_with_non_scan_radio_work
radius_auth_unreachable
wep_open_auth

BSS <BSSID> picked incorrect BSS entry within wpa_supplicant due to the
old zero-length SSID showing up from the earlier hidden SSID case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 21:58:47 +02:00
Jouni Malinen
2ffbf34db0 tests: Optimize test case execution order for multiple VMs
Move test cases with long duration to the beginning as an optimization
to avoid last part of the test execution running a long duration test
case on a single VM while all other VMs have already completed their
work.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 18:20:15 +02:00
Jouni Malinen
01c87519a3 tests: Do not mark proxyarp_open failed if ebtables is not available
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 17:14:00 +02:00
Jouni Malinen
f24489d94f tests: Use new scripts for vm-run.sh codecov
Now there is only one set of commands to maintain. The separate reports
for individual components have not been of much use in the past, so they
are dropped for now.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 16:41:59 +02:00
Jouni Malinen
cb0555f7be tests: EAP-IKEv2 protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 16:16:26 +02:00
Jouni Malinen
f41f670ea5 tests: ERP with EAP-IKEv2
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 23:48:53 +02:00
Jouni Malinen
f1381f99e4 tests: Mesh ht_mode options
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:27:22 +02:00
Jouni Malinen
f86868c253 tests: wdev_id in STATUS-DRIVER
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:18:26 +02:00
Jouni Malinen
542452a93d tests: hostapd behavior with interface in different bridge
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:01:31 +02:00
Jouni Malinen
a42f88f8e7 tests: bg_scan_period parameter configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:44:40 +02:00
Jouni Malinen
6343f24d35 tests: IBSS cfg80211 workarounds
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:36:41 +02:00
Jouni Malinen
cece9b7df7 tests: Dynamic BSS add operation reusing existing interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:04:18 +02:00
Jouni Malinen
8916857da6 tests: TDLS with VHT
This adds some more coverage, but the TDLS setup is not for VHT due to
missing support in mac80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
4466fe6541 tests: VHT and 40 MHz channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
d4d80e9a14 tests: SMPS AP configuration options
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
598555c7e8 tests: IEEE 802.1X with static WEP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
1e7528298a tests: cfg80211 scan-for-auth workaround with WEP keys
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:28:53 +02:00
Jouni Malinen
a5687274e1 tests: cfg80211 scan-for-auth workaround failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:22:18 +02:00
Jouni Malinen
b97a7bf672 tests: Large number of BSS add operations with hostapd
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:13:00 +02:00
Jouni Malinen
863a54093d tests: rfkill block prior to wpa_supplicant start
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 16:46:39 +02:00
Jouni Malinen
d92da8a23e tests: Radar detection on non-HT and on HT40- channels
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:50:19 +02:00
Jouni Malinen
cac5526390 tests: Report ROAM failure in pmksa_cache_opportunistic_multiple_sta
There is no need to wait for the timeout if the ROAM command itself
failed. This could happen if an earlier test case had left hidden SSIDs
in the cfg80211 BSS table.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:37:08 +02:00
Jouni Malinen
1264b68355 tests: Clear cfg80211 scan results after wext_hidden
Leaving hidden SSIDs in the cfg80211 BSS table can result in errors in
the following test cases, so use special care to clear all BSS entries
at the end of the wext_hidden test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:36:01 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
e0cccf26a4 tests: Add --codecov support to parallel-vm.py
This allows code coverage report to be generated must faster with the
help of parallel VMs executing test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 01:24:28 +02:00
Jouni Malinen
42ce1a27e0 tests: Connection with large number of scan_ssid=1 network blocks
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 23:30:58 +02:00
Jouni Malinen
ed930f064c tests: P2P_LISTEN and scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 23:17:06 +02:00
Jouni Malinen
558ac77c58 tests: setband and scans
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 23:08:10 +02:00
Jouni Malinen
7749b1c982 tests: Additional coverage for filter_ssids=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 20:26:07 +02:00
Jouni Malinen
91cc6f918a tests: AP_SCAN 2 operation
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 20:08:58 +02:00
Jouni Malinen
83e80d32f1 tests: SCAN requests while in non-scan radio work
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-19 15:23:07 +02:00
Jouni Malinen
7c5c1ba7b4 tests: P2P_LISTEN behavior with offchannel TX
This verifies that offchannel TX (PD in this specific case) does not
stop ongoing long P2P_LISTEN operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
89cd4355bb tests: Fix proxyarp_open IPv4-from-bridge
There were couple of typos in the IP addresses and there was no coverage
for the normal unicast ARP response from the bridge (since non-wireless
device does not get proxied by the AP). In addition, it is better to
change the IP address used here to be unique to make the sniffer logs
easier to interpret.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-18 16:41:40 +02:00
Jouni Malinen
6d5332948c tests: Use send_ns() helper for the earlier proxyarp_open NS packets
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
40e4c9c8b0 tests: Add traffic test to proxyarp_open
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
5a3ce80265 tests: ProxyARP behavior with IPv6 frames
This adds transmission of number of NS/NA frames to test ProxyARP
behavior. The actual validation of the AP behavior is still manual,
i.e., a separate inspectation of the capture files is needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
19cbe06238 tests: Add ebtables rules for ProxyARP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
a95c6973aa tests: Use non-promiscuous mode and packet-buffered tcpdump capture
This helps in avoiding truncated capture files in the proxyarp_open test
case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
1d0b5a04e6 tests: Dump monitor messages before hwsim_utils test
This may be needed in some corner cases where broadcast frames with two
associated stations are received by both devices.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
db1d66d879 tests: Fix wifi_display_persistent_group event checks
The final invitation case in this test was verified incorrectly. The GO
was already operatign in that case, so there was not supposed to be a
new P2P-GROUP-STARTED message from GO. That happened to be show up in
the pending event messages from the last instance, but that was just by
accident and any additional dump_monitor() operation added here would
cause this test to fail. Fix this by handling the final invitation
separately and verifying that only the client side indicates
P2P-GROUP-STARTED.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
c8836a4f03 tests: Allow dump_monitor() to be used without global monitor interface
It is possible for WpaSupplicant instance to be used without the global
control socket, so allow dump_monitor() to handle this case cleanly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:01:41 +02:00
Jouni Malinen
9d7fdac5b3 tests: Try to clear scan results after regulatory domain changes
It was possible for regulatory domain changes to "leak" into following
test cases in number of cases where the cfg80211 BSS table remained
after regulatory domain had been restored to world roaming. Try to make
this less likely to occur by explicitly clearing BSS table at the end of
test cases that use different regulatory domain. This makes P2P test
cases that verify channel selection based on world roaming rules more
robust.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-15 01:32:01 +02:00
Jouni Malinen
970a23f665 tests: Make flush_scan_cache() more robust
It was possible for BSS entries on the scanned channel (2412 MHz) to be
left behind after flush_scan_cache() call. Use a less likely channel
2417 MHz as the default channel to scan. This will hopefully get rid of
most problematic BSS entries from previous test cases. For example,
ap_hs20_oen followed by ap_hs20_random_mac could fail due to
INTERWORKING_CONNECT seeing non-RSN scan result from the previous test
case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-15 01:13:03 +02:00
Jouni Malinen
d48b64ba6c tests: Use helper function for adding open mesh network
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 23:34:43 +02:00
Jouni Malinen
7e3614df5c tests: Mesh with dynamic interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 23:28:36 +02:00
Jouni Malinen
5881873b86 tests: Make pmksa_cache_opportunistic_connect more robust
Use scan_for_bss() instead of scan(freq) to avoid false positives due to
active scan failing under heavy load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 19:15:48 +02:00
Jouni Malinen
acb63c753b tests: SAE with missing password
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 17:09:14 +02:00
Jouni Malinen
0e40d7daa4 tests: ERP when server has dropped the keys
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 15:47:04 +02:00
Jouni Malinen
777bbe7a3c tests: P2P_PRESENCE_REQ on group interface
This ends up using the special offchannel.c code path where a different
interface is selected for TX. In addition, the P2P-PRESENCE-RESPONSE
event is verified to be delivered on the group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 15:47:04 +02:00
Jouni Malinen
11ace2ed1f tests: Mesh and missing SAE password
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 15:47:04 +02:00
Jouni Malinen
fba65f7240 tests: Mesh BSS data
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 12:55:43 +02:00
Jouni Malinen
54cacef5eb tests: Mesh sae_groups configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 12:55:40 +02:00
Jouni Malinen
e9026725f7 tests: Extra coverage for command line arguments
The results for these are not currently verified, but this allows
--codecov runs to get more coverage for the command line argument
parsers.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 12:24:15 +02:00
Jouni Malinen
e869f812d3 tests: DEAUTHENTICATE/DISASSCIATE/CHAN_SWITCH error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
69f9912310 tests: Additional FETCH_OSU and CANCEL_FETCH_OSU coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
ea27f66292 tests: STOP_FETCH_ANQP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
1eaeb7fbaa tests: P2P_UNAUTHORIZE to unauthorize a peer
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
909f13cc52 tests: Move 'SET pmf 0' from reset() to test cases
This avoids one more cleanup step between most test cases by clearing
the default PMF behavior change only in case it was actually modified
during a test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
be9f156200 tests: Move WPS_ER_STOP from reset() to test cases
This avoids one more cleanup step between most test cases by stopping ER
only in case it was actually used during a test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
d6b916c9db tests: WPS_ER_PBC error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
8f8c2fe8b2 tests: WPS ER restart and stop
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
b37dac50a2 tests: wpa_supplicant AP mode and PBC session overlap
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:02 +02:00
Jouni Malinen
6eae42f98f tests: Additional coverage for miscellaneous ctrl_iface commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:02 +02:00
Jouni Malinen
70d29ec946 tests: Extend RRM neighbor request testing
This uses a new testing mode in hostapd to allow RRM neighbor request
transmittion to be tested. For the second part of the test case to be
executed, mac80211_hwsim needs to be modified to claim support for the
required RRM capabilities (that change is not yet in Linux kernel).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 21:09:32 +02:00
Jouni Malinen
357edd386f tests: Additional VENDOR_ELEM coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 20:12:24 +02:00
Jouni Malinen
d655bbc797 tests: DATA_TEST_* error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 19:33:54 +02:00
Jouni Malinen
b854d3c85d tests: EAPOL_RX failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 19:16:34 +02:00
Jouni Malinen
f157078c13 tests: DRIVER_EVENT failure case
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 19:08:24 +02:00
Jouni Malinen
3d9848967a tests: Additional MGMT_TX coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 19:05:00 +02:00
Jouni Malinen
cbdfff0a73 tests: A single BSS with multiple key management options
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-12 14:05:43 +02:00
Jouni Malinen
9446f3c253 tests: SCAN error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 01:13:35 +02:00
Jouni Malinen
530b519f78 tests: RADIO_WORK error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 00:27:06 +02:00
Jouni Malinen
9c1be553c8 tests: Invalid VENDOR command
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 00:10:52 +02:00
Jouni Malinen
c2bf6d3afc tests: SIGNAL_POLL in 160 and 80+80 MHz channels
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 23:37:02 +02:00
Jouni Malinen
f8423317b3 tests: WNM_SLEEP error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 23:03:10 +02:00
Jouni Malinen
08ba008c62 tests: AUTOSCAN reconfiguration while in SCANNING state
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 22:57:36 +02:00
Jouni Malinen
44c41cdf47 tests: Additional HS20_ICON_REQUEST coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 16:14:24 +02:00
Jouni Malinen
ea215c54d0 tests: Additional coverage for HS20_GET_NAI_HOME_REALM_LIST
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 16:12:59 +02:00
Jouni Malinen
5e80b502ee tests: Additiona GAS_REQUEST/GAS_RESPONSE_GET coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
1ca6d13dac tests: Make wep_open_auth less likely to fail due to old scan entry
Flush cfg80211 cached scan results to avoid getting any non-WEP matches
for the BSS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-11 15:18:11 +02:00
Jouni Malinen
ea68ed56b9 tests: Additional ANQP_GET and HS20_ANQP_GET error coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
7e71fbc169 tests: INTERWORKING_CONNECT with invalid parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
c62438b822 tests: Optimize p2p_persistent test cases
Number of unnecessary scan iterations can removed from these test cases
by specifying a single channel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
c93b6706d2 tests: Additional P2P_REMOVE_CLIENT coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
7387532549 tests: Additional coverage for P2P_EXT_LISTEN
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
bf1b59731a tests: Additional P2P_PRESENCE_REQ coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00