Commit Graph

14339 Commits

Author SHA1 Message Date
Jouni Malinen
055cd39788 tests: DPP P-256 test vectors
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-07 13:35:19 +02:00
Jouni Malinen
f55269753c DPP: Allow protocol key to be overridden for testing purposes
This can be used for various testing needs.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-05 23:53:08 +02:00
Jouni Malinen
33cddd7fe9 tests: sigma_dut and DPPAuthDirection,Mutual on Initiator
Do not include this argument in normal case, but add a test case to
cover the special extra check case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-05 21:13:30 +02:00
Jouni Malinen
c79b9db066 tests: sigma_dut DPP protocol testing - Stop at RX
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-05 20:22:07 +02:00
Jouni Malinen
1fb0c105a4 tests: WPS with other AES-based ciphers
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:14:55 +02:00
Jouni Malinen
afd3cf14a0 WPS: Add GCMP-256 and CCMP-256 cipher options on Enrollee
If a credential with encp type AES is received, add GCMP-256 and
CCMP-256 cipher options on station Enrollee based on local capabilities.
This is needed to allow connection with an AP using either of these
newer ciphers.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:14:55 +02:00
Jouni Malinen
59642ca956 tests: Make ap_wps_ap_scan_2 work with multiple AES-ciphers
This test case is not really realistic and the second connection attempt
would fail if additional AES-based ciphers get provisioned. Work this
around by dropping to CCMP only if other ciphers are present.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:14:55 +02:00
Jouni Malinen
70dcb4aa0e tests: Allow more ciphers in ap_wps_mixed_cred
This is needed to avoid false errors with GCMP-256 and CCMP-256 to be
added in the implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:04:32 +02:00
Jouni Malinen
5f481b6fdb WPS: Check BSS table against current BSSID if credential does not match
The credential MAC address is not necessarily that of the AP, i.e., it
is more likely to be that of the Enrollee. Check the scan results
against the current BSSID as well if match is not found otherwise when
going through the mixed mode workaround.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:00:45 +02:00
Jouni Malinen
402c8e00b7 WPS: Map GCMP-256 and CCMP-256 to AES encryption type
This is needed to allow a credential to be built for GCMP-256/CCMP-256
networks that do not enable GCMP-128/CCMP-128.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:00:45 +02:00
Shiva Sankar Gajula
a2660890a5 WPS: Allow WPS to be enabled in CCMP-256 and GCMP-256 only cases
Extend the check against WPA/TKIP only configuration by adding CCMP-256
and GCMP-256 to the list of allowed ciphers. This is needed to allow WPS
to be enabled in AP configurations where neither CCMP-128 nor GCMP-128
are enabled.

Signed-off-by: Shiva Sankar Gajula <sgajula@qti.qualcomm.com>
2017-12-02 12:00:44 +02:00
Jouni Malinen
41dafe0c0a tests: DPP testing to check for mutual authentication on Initiator
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:00:44 +02:00
Jouni Malinen
163fc3d562 DPP: Indicate to upper layers whether mutual authentication was used
DPP Responder selects whether mutual authentication is used. This commit
adds information about that selection to upper layers (ctrl_iface event
DPP-AUTH-DIRECTION mutual=<0/1>) on the Initiator side.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:00:44 +02:00
Jouni Malinen
c30517c6f7 tests: DPP exchange stopping unexpectedly
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:00:44 +02:00
Jouni Malinen
34603767b8 DPP: Extend protocol testing to allow exchange termination
This extends dpp_test functionality to allow DPP exchanges to be stopped
when receiving a specified message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:00:44 +02:00
Jouni Malinen
ed2c493e9e DPP: Change Authentication Response retry time to 1 second
The previously used 10 second timer did not really make much sense since
the Initiator is not going to be waiting for the response that long.
Change this to 1 second based on the DPP tech spec change.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:00:44 +02:00
Johannes Berg
702384f77e tests: nl80211.py: Fix attribute padding
The kernel started enforcing attribute lengths, and nl80211.py had been
doing it all wrong - the padding must be present, but not part of the
length.

Fix it to do it the right way.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-02 12:00:32 +02:00
Jouni Malinen
963d3149ab nl80211: Fix NL80211_MESHCONF_AUTO_OPEN_PLINKS encoding
This nl80211 attribute uses NLA_U8 policy in cfg80211 and wpa_supplicant
needs to use same size when writing the attribute.

This fixes mesh mode regression triggered by kernel commit "net:
netlink: Update attr validation to require exact length for some types"
in v4.15-rc1 that resulted in the following debug log entry when trying
to join a mesh:
nl80211: mesh join failed: ret=-22 (Invalid argument)

Fixes: 6c1664f605 ("nl80211: Add new commands to support mesh interfaces")
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-01 22:21:24 +02:00
Jouni Malinen
a2426829ce nl80211: Fix NL80211_ATTR_SMPS_MODE encoding
This nl80211 attribute uses NLA_U8 policy in cfg80211 and
hostapd/wpa_supplicant needs to use same size when writing the
attribute.

This fixes AP mode regression triggered by kernel commit "net: netlink:
Update attr validation to require exact length for some types" in
v4.15-rc1 that resulted in the following debug log entry when trying to
enable beaconing:
nl80211: Beacon set failed: -34 (Numerical result out of range)

Fixes: da1080d721 ("nl80211: Advertise and configure SMPS modes")
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-01 20:22:44 +02:00
Jouni Malinen
ce83008c79 tests: sigma_dut and WPS PBC Enrollee
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 23:06:33 +02:00
Jouni Malinen
6923312dc6 tests: sigma_dut controlled connection using preconfigured profile
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 22:54:34 +02:00
Jouni Malinen
5f170c99a4 tests: DPP protocol testing - invalid E-nonce in Conf Req
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 22:03:07 +02:00
Jouni Malinen
f0a383a981 DPP: Extend dpp_test with invalid E-Nonce in Config Req
Allow an E-Nonce attribute with invalid length to be sent for protocol
testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 22:01:10 +02:00
Jouni Malinen
087f494140 tests: DPP protocol testing - invalid Transaction ID in Peer Disc Req
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 21:56:55 +02:00
Jouni Malinen
55c6c85855 DPP: Extend dpp_test with invalid Transaction ID in Peer Disc Req
Allow a Transaction ID attribute with invalid length to be sent for
protocol testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 21:56:19 +02:00
Krishna Rao
364039d223 Add QCA vendor command and attributes for RROP
Add QCA vendor command and attributes for vendor specific Representative
RF Operating Parameter (RROP) information. This information is intended
for optional use by external ACS. It provides guidance values for some
RF parameters that are used by the system during operation, so that
external ACS can utilize these to compare between channels, bands, etc.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 18:47:32 +02:00
Jouni Malinen
edac8087e6 tests: Make dpp_auth_req_retries* more reliable
These test cases were failing when run immediately after
dpp_pkex_test_fail. It looks like timing of the TX status and the short
eloop wait were getting reordered in this cases. This ended up with some
of the DPP-TX-STATUS event messages missing. Instead of explicitly
checking for those message, simply count the number of DPP-TX messages
to verify that the correct number of retries are being sent.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 12:56:24 +02:00
Jouni Malinen
0e19300d5b nl80211: Use consistent "0x" prefix for the cookie values
One of the event message for TX status was missing 'x' from the "0x"
prefix. Add that to make the used format consistent for all cookie debug
print cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 12:42:58 +02:00
Jouni Malinen
fa5c907495 DPP: Call wpas_dpp_stop() from wpas_dpp_deinit()
This makes the full DPP deinit operation more consistent with stopping
of a single operation. In practice, this adds the new GAS client
stopping functionality.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 00:11:22 +02:00
Jouni Malinen
818e3c94b7 tests: DPP/PKEX and local failures
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 00:08:40 +02:00
Jouni Malinen
1866dfb52c DPP: Stop pending GAS client operation on DPP_STOP_LISTEN
This makes the operation more complete in stopping all ongoing DPP
related functionality.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 00:08:40 +02:00
Jouni Malinen
f981ce7298 DPP: Do not continue if public key hash derivation fails
sha256_vector() result was ignored apart from printing out the failure
in the debug log. This is not really a normal case and it is better to
reject the full operation rather than try to continue with an incorrect
public key hash value.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 00:08:38 +02:00
Jouni Malinen
8a37d54ea7 DPP: Fix memory leak on dpp_auth_build_conf() error paths
The wpabuf for the message needs to be freed on the error paths.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-29 21:21:34 +02:00
Jouni Malinen
281f480c53 JSON: Fix a memory leak on an error path
If the second json_alloc_token() call failed to allocate memory,
json_parse() missed the first allocation on the error path. Assign the
root pointer earlier for that case to avoid the potential memory leak.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-29 13:22:44 +02:00
Jouni Malinen
622934128b DPP: Fix a memory leak on an error path
Need to free temporary allocations if dpp_build_conf_start() fails to
allocate memory.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-29 13:03:48 +02:00
Jouni Malinen
ed62d40116 DPP: Deinit PKEX instance on DPP_STOP_LISTEN
Previously this stopped only the DPP Authentication instance, but it is
better to clear both PKEX and Authentication.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-29 12:24:01 +02:00
Jouni Malinen
e6a6de2994 tests: Generate DPP Config Object for legacy network (PSK)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-29 12:12:31 +02:00
Jouni Malinen
634a130a52 DPP: Clear authentication instance on configuration completion in AP
wpa_supplicant was already doing this and hostapd needs to clear
hapd->dpp_auth when completing the exchange in Configurator (GAS server)
role.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-27 20:33:43 +02:00
Jouni Malinen
8b4adc38aa tests: sigma_dut DPP AP Configurator using self-configuration
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-27 20:26:33 +02:00
Jouni Malinen
d3cb7ebe1b DPP: Do not process dpp_auth_ok_on_ack multiple times
An additional TX status callback could result in processing the DPP
authentication completion another time at least with hostapd. Fix this
by clearing the dpp_auth_ok_on_ack when processing it.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-27 20:20:26 +02:00
Ashok Ponnaiah
dc2f24f1b2 DPP: Fix compilation without CONFIG_TESTING_OPTIONS=y
Add CONFIG_TESTING_OPTIONS ifdef protection to couple of forgotten DPP
test parameters in wpa_supplicant ctrl_iface.

Signed-off-by: Ashok Ponnaiah <aponnaia@qti.qualcomm.com>
2017-11-27 17:30:03 +02:00
Jouni Malinen
82feacced0 DPP: Ignore GAS server status callback for unknown response
It was possible for a timeout from an old GAS server operation to
trigger DPP configuration failure during the subsequent DPP operation.
Fix this by verifying that the status callback is for the response
generated during the same DPP Authentication/Configuration exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-27 13:48:40 +02:00
Jouni Malinen
73a7feb311 tests: DPP configurator (AP) signing own connector
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-27 13:24:20 +02:00
Jouni Malinen
a2588be82c DPP: Add DPP_CONFIGURATOR_SIGN support to hostapd
Configurator signing its own Connector was previously supported only in
wpa_supplicant. This commit extends that to hostapd to allow an AP
acting as a Configurator to self-configure itself.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-27 13:24:20 +02:00
Jouni Malinen
7eb6bfb45d DPP: Move hostapd Configurator/bootstrap data into global context
This moves the Configurator and Bootstrapping Information data from
struct hostapd_data (per-BSS) to struct hapd_interfaces (per-hostapd
process). This allows the information to be maintained over interface
restarts and shared between interfaces.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-27 13:24:20 +02:00
Jouni Malinen
cdef4e91aa tests: DPP QR Code and mutual authentication with auto-generated key
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-26 17:43:43 +02:00
Jouni Malinen
73f21929a7 DPP: Auto-generate Initiator bootstrapping info if needed
Instead of using the all-zeros Initiator Bootstrapping Key Hash when no
local bootstrapping key is configuref for the Initiator, automatically
generate a temporary bootstrapping key for the same curve that the
Responder uses. If the Responder indicates that it wants to do mutual
authentication, provide the URI for the auto-generated bootstrapping key
in the DPP-RESPONSE-PENDING event for upper layers to display the QR
Code.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-26 17:41:22 +02:00
Janusz Dziedzic
b098542cd4 tests: Allow ap_ft for remote tests
Fix problem when running ap_ft test cases with real HW using remote
tests and hwsim wrapper by using the newer hostapd.app_ap() API.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2017-11-26 13:31:15 +02:00
Jouni Malinen
b9e8f920a8 tests: Split ap_vht160 into two test cases (ap_vht160 and ap_vht160b)
These VHT160 with DFS cases were in a single test case to optimize test
execution time with parallel wait for the 60 second CAC. However, this
design has become difficult to support with the kernel changes that
allow radar events to be shared between interfaces. To avoid need for
more workarounds here just for testing purposes, split this into two
test cases so that conflicting events from another interface do not
cause the test case to fail.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-11-26 13:27:25 +02:00
Jouni Malinen
32452fd2aa tests: Split dfs_radar into two test cases (dfs_radar1 and dfs_radar2)
These DFS radar detection cases were in a single test case to optimize
test execution time with parallel wait for the 60 second CAC. However,
this design has become difficult to support with the kernel changes that
allow radar events to be shared between interfaces. To avoid need for
more workarounds here just for testing purposes, split this into two
test cases so that conflicting events from another interface do not
cause the test case to fail.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-11-26 12:57:27 +02:00