Commit Graph

6691 Commits

Author SHA1 Message Date
Jouni Malinen
6d1ca81ee8 Remove unused hostapd_cleanup_iface_pre()
This has not been used in years and can be removed to clean up the
hostapd deinit path a bit.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 12:44:54 +02:00
Jouni Malinen
747c85f932 hostapd: Add more debug prints to deinit path
This makes it easier to follow the various interface/BSS deinit
operations.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 12:42:20 +02:00
Jouni Malinen
6023a7880b Restore hapd->interface_added tracking to core hostapd
This reverts parts of commit 390e489c0d
that tried to enable removal of the first BSS. Since that operation is
now forced to remove all BSSs, these changes are not needed. The
hostapd_if_remove() operation in hostapd_free_hapd_data() is problematic
for the first BSS since it ends up freeing driver wrapper information
that is needed later when deinitializing the driver wrapper.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 01:38:17 +02:00
Jouni Malinen
486d2ff0eb hostapd: Deinit ctrl_iface in case of add interface failure
Since the control interface is now initialized as part of
hostapd_setup_interface(), it needs to be deinitialized on the error
path.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 01:32:55 +02:00
Jouni Malinen
8540e0b520 hostapd: Fix DETACH command debug prints to avoid use of freed memory
In case a control interface socket is detached because of sendmsg()
failing for the socket, function call to detach the socket uses a
pointer to the socket information in the structure to be freed. Reorder
code to print socket info before freeing the data to avoid use of freed
memory in case debug prints are enabled.

This is similar to the earlier wpa_supplicant fix in commit
a235aca316.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 01:15:28 +02:00
Jouni Malinen
742117ad88 tests: BSS removal during ongoing HT or ACS scan
These verify that hostapd is able to remove a BSS while the radio is
still in the progress of the initial channel parameter determination.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 01:11:25 +02:00
Jouni Malinen
a364852be8 tests: Adjust BSS add/remove test cases for primary BSS constraint
Since removal of the primary BSS is now going to remove all the BSSs
for a radio, these two test cases need changes to not trigger false
failures.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 01:08:54 +02:00
Jouni Malinen
cdf3fb1f1c Fix removal of a BSS that has not yet been fully initialized
If a secondary BSS is removed while it is waiting for the primary BSS to
complete channel setup (e.g., due to HT co-ex scan, ACS, or DFS), the
hostapd_data instance has not yet been initialized. Fix the BSS removal
code to take this special case into account and not try to deinitialize
the hostapd_data instance that has not yet been started.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 00:57:38 +02:00
Jouni Malinen
2f99d90726 Remove all BSSs on removal of the first one
The changes in commit 5592065850 to allow
any BSS to be removed were a bit too early since there are still number
of areas that use the first BSS as a special case. Especially the
driver_ops API is going to require quite a bit of cleanup before removal
of the first BSS without the other BSSes of the same radio can be done
safely.

For now, force all BSSs to be removed in case the first one is removed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 00:43:10 +02:00
Jouni Malinen
149338020b drivers: Do not call hostapd_logger()
This call requires a struct hostapd_data pointer and that is not really
something that the driver wrappers should be using.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 00:19:46 +02:00
Jouni Malinen
1281c0ab69 Remove a compiler warning from -O0 build
It looks like abs() result is signed and gcc warns about this when
running a build with -O0 but not with -O2.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 00:00:58 +02:00
Jouni Malinen
2b6623ab13 hostapd: Do not terminate process on dynamic interface add failure
Limit the calls to eloop_terminate() to happen only for the
initialization failure from the interfaces that we specified on the
command line. This allows hostapd process to continue operating even if
a dynamically added interface fails to start up. This allows the upper
layer software to fix a configuration error and retry.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-05 17:35:11 +02:00
Jouni Malinen
66f0bdb465 tests: Handle hostapd dying more gracefully
Catch exceptions from operations that try to remove hostapd interface
and rename the log file. If these operations fail due to socket
connection issues, hostapd has likely died or gotten stuck somewhere.
Report the test case as a failure and stop test run cleanly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-05 13:21:58 +02:00
Jouni Malinen
217cf4991d P2P: Add more debug prints for frequency selection
This prints out get_shared_radio_freqs() results and related information
from P2P operations to make debug logs more helpful for figuring out
issues related to multi-channel concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-05 11:07:51 +02:00
Ilan Peer
4dd3f86834 P2P: Fix bug in GO frequency selection
When trying to choose a frequency that can be used for GO instantiation,
properly check if there are free channels that can be used.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-11-05 10:55:22 +02:00
Ilan Peer
9804873e53 wpa_supplicant: Fix bug in get_shared_radio_freqs
The idx variable was mistakenly set to 0 at the beginning of the
interface iteration. This could result in the operating channel of the
interface calling the function from being removed from the returned
frequency array if other interfaces were operating.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-11-05 10:55:22 +02:00
Andrei Otcheretianski
3342c2636c wpa_supplicant: Fix updating GO beacons on WFD subelements change
When WFD Subelements are set, the IE in the Beacon frames of already
existing groups are not updated. This patch fixes this issue by setting
beacon_update to be 1 on WFD IE update.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-05 10:55:22 +02:00
Adriana Reus
72c12c1d30 EAPOL: Fix static analyzer warnings for pac_opaque_encr_key
The allocation was not verified to complete successfully and the
allocated memory was not freed on error paths.

Signed-hostap: Adriana Reus <adriana.reus@intel.com>
2013-11-05 10:28:57 +02:00
Haim Dreyfuss
3139270903 bgscan: Add global bgscan configuration
This option can be used to globally configure bgscan parameters
for all the network blocks.

Note that this configuration will not override a network block
specific bgscan settings, but will only be used in case that
the network block does not have a valid bgscan configuration.

Signed-hostap: Haim Dreyfuss <haim.dreyfuss@intel.com>
2013-11-05 10:26:31 +02:00
Johannes Berg
5061a301e5 hwsim tests: Check kernel messages for warnings/bugs
When a test passes but the kernel printed warnings, consider
the test to have failed.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-11-05 10:17:35 +02:00
Naresh Jayaram
efc58df29c eap_proxy: Re-read IMSI from proxy in Interworking functionality
Try to read the IMSI values through the eap_proxy layer for Interworking
functionality again if the value was not available at startup.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-05 10:12:14 +02:00
Jouni Malinen
d355372ce4 tests: HS 2.0 excluded SSID
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 14:48:33 +02:00
Jouni Malinen
d1ba402fe5 tests: HS 2.0 required roaming consortium
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 14:48:28 +02:00
Jouni Malinen
2232edf8e2 tests: Use dictionary as add_cred_values() parameter
This makes it more convenient to use this function for cases that modify
credential parameters.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 13:12:34 +02:00
Jouni Malinen
5c5656c37a tests: Do not require hlr_auc_gw for HS 2.0 username/password
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 13:12:28 +02:00
Jouni Malinen
d4f1a347ce Allow AP mode configuration with VHT enabled on 2.4 GHz
hostapd_set_freq_param() rejected the 20 MHz channel case with
vht_enabled due to the existing validation step including only 5 GHz (to
be more exact, only >= 5000 MHz). While the behavior may not be fully
defined for 2.4 GHz, we can enable this based on driver capability
advertisement to fix automatic VHT selection for P2P use cases.
mac80211_hwsim advertises VHT for 2.4 GHz band and that resulted in
failures when trying to start GO on that band with vht=1 parameter.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 11:51:56 +02:00
Jouni Malinen
8454e1fd33 tests: Add preliminary version of DFS test cases
These are still disabled by default since they require mac80211_hwsim
changes that are not yet in the upstream kernel and because the test
cases do not fully work yet. Anyway, they are quite convenient for
development use, so good to have them available in the main repository.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:57:39 +02:00
Jouni Malinen
bb337ddac2 DFS: Do not use cf1 to override freq for 20 MHz channels
NL80211_ATTR_CENTER_FREQ1 is defined to be used for anything but 20 MHz
bandwidth, so it could be unset for 20 MHz channels. Do not use it to
override center frequency from NL80211_ATTR_WIPHY_FREQ (if available)
for 20 MHz channels to avoid clearing frequency.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:50:48 +02:00
Jouni Malinen
0dfd2c61a5 Document AP mode startup functions
This provides some more details on how interfaces and BSSes are
initialized during hostapd startup.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:30:31 +02:00
Jouni Malinen
1b3926ef73 tests: Add a test case for HT40 co-ex scan
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:30:31 +02:00
Jouni Malinen
b47750beba tests: Add test cases for automatic channel selection
This extends the Hostapd class to support monitor interface events and
STATUS command similarly to the WpaSupplicant class so that internal
hostapd state can be verified in more detail.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:30:31 +02:00
Jouni Malinen
77990cd7a9 tests: Add test case for multi-BSS configuration file
Verify that a single configuration file can be used to initiate multiple
BSSes in hostapd and that these BSSes can then be dynamically removed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 20:20:50 +02:00
Jouni Malinen
fee947bfc0 hostapd: Use correct wpa_printf verbosity level for message
This configuration file message is informative and MSG_INFO should be
used instead of MSG_ERROR.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 20:12:36 +02:00
Jouni Malinen
2fe210cebb hostapd: Fix multi-BSS configuration file parsing regression
Commit ebd79f07c4 broke parsing of
configuration files that use the bss parameter to specify another BSS
entry. This resulted in crashing the process with NULL pointer
dereference since the new hostapd_config::bss design requires this
function to allocate a new hostapd_bss_config structure.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 20:01:50 +02:00
Jouni Malinen
e4ba031531 hostapd: Use start_ctrl_iface() from hostapd_add_iface()
Better share the same function for initializing control interface from
the two possible paths that can add a new interface to hostapd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
bf7f09bd24 Fix AP mode QoS Map configuration to be per-BSS
This is a per-BSS configuration parameter and as such, needs to be
configured to the driver from hostapd_setup_bss() instead of
hostapd_driver_init().

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
dc036d9ee0 DFS: Convert hostapd_data use to hostapd_iface
DFS operations are specific to the interface (radio/wiphy), not BSS
(netdev/vif), so hostapd_iface is the appropriate element to use in
them.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
2db938e8de hostapd: Fill in phyname automatically
If per-BSS configuration enabling did not provide a phy name, iface->phy
was left empty. It can be helpful to set this up automatically, so fill
that when initializing the interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
5ae6449ca2 hostapd: Add ctrl_iface STATUS command
This can be used to fetch runtime information about hostapd interfaces.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
afadaff976 Optimize 40 MHz HT co-ex scan on AP
Only scan the affected channels instead of all enabled channels when
determining whether the primary and secondary channel for HT40 needs to
be swapped. This speed up HT40 setup considerably on 5 GHz band.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
7d6d73701e hostapd: Add AP-ENABLED/DISABLED ctrl_iface events
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
e1c5faf007 hostapd: Track interface state
The new hostapd_iface::state enum is used to track the current state of
the hostapd interface (a radio/wiphy).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
f0793bf191 hostapd: Wait for channel list update after country code change
If hostapd is requested to set the country code and the previous country
code differs from the new one, the channel list information from the
driver may change. This change may not be instant, so wait for an
EVENT_CHANNEL_LIST_CHANGED event before continuing interface setup with
fetching of the channel list information. This fixes issues where the
selected channel is not available based on the previous regulatory data
and update through CRDA takes some time.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
ae134e1d2b hostapd: Add ctrl_iface events for ACS
These give status information to external observers from automatic
channel selection operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
ad08e1413b hostapd: Move ctrl_iface initialization to happen earlier
Channel determination may take considerable time when ACS or DFS is
used, so it is useful to be able to observe this process through the
control interface. Move the initialization of the control interfaces to
happen before channel determination so that this can be achieved.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
c20cb023e2 hostapd: Remove hostapd_interface_init2()
This was an unnecessary wrapper functions for calling two functions from
a single place in the code. It is cleaner to just call those two
functions directly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
4a5deb9b9d hostapd: Simplify interface initialization
Use hostapd_interface_init2() for all interfaces instead of the
previously used different paths for per-interface-config and
per-BSS-config cases. This moves the calls to hostapd_driver_init() and
hostapd_setup_interface() to happen after all configuration files have
been read.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
e114c49cfc tests: Add an EAP-TLS test case
This fixes the user.key file (incorrect key was copied previously) and
adds a test case for EAP-TLS with WPA2-Enterprise.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
22b99086ce tests: Add more EAP test cases
This increases EAP method coverage for WPA2-Enterprise to include
EAP-pwd, EAP-GPSK, EAP-SAKE, EAP-EKE, EAP-IKEv2, EAP-PAX, and EAP-PSK.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
186c905912 DFS: Add control interface events for various DFS events
These can be useful for external programs that track the current state
of the AP.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 11:31:48 +02:00