Commit Graph

5999 Commits

Author SHA1 Message Date
Jouni Malinen
a601f71bc7 P2P: Fix a typo in a function documentation
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-22 20:55:51 +02:00
Jouni Malinen
fd848ab9e3 wlantest: Store last received GTK for each STA
This allows info_sta command to be used to fetch the last received GTK
separately for each STA.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-22 16:59:25 +02:00
Jouni Malinen
3c56f0e275 wlantest: Fix EAPOL-Key Key Data decryption for rekey case
KEK from TPTK needs to be used instead of from PTK when processing
rekeying case similarly to what was already done with KCK.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-22 16:39:17 +02:00
윤민홍
3b655312d4 P2P: Send D-Bus ServiceDiscoveryRequest signal for external SD processing
wpas_notify_p2p_sd_request() needs to be called when
p2p_sd_over_ctrl_iface is set to provide SD events over D-Bus similarly
to the ctrl_iface events.
2011-12-22 00:34:29 +02:00
Jouni Malinen
9b6f44cb63 Process EVENT_SCHED_SCAN_STOPPED partially if interface is disabled
The internal sched_scanning state needs to be cleared on this event
even if the events happen to get ordered in a way that the interface
gets disabled just prior to EVENT_SCHED_SCAN_STOPPED event.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-21 13:36:58 +02:00
Jouni Malinen
4551dd9060 Ignore disassociation event in wpa_supplicant AP mode
If the driver was associated in station mode just before the AP mode was
started, the station mode disassociation event may end up getting
delivered to wpa_supplicant only after the AP mode has been started.
This can result in unexpected attempt to reassociate back to the network
that was previously used in station mode. Avoid this by ignoring the
disassociation event.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-21 13:36:13 +02:00
Jouni Malinen
d9bdba9f86 P2P: Do not allow pending listen command override connect
If p2p_listen is issued during a p2p_scan, a pending after-scan operation
is scheduled. However, since there is support for only a single pending
operation, this was able to override a previously scheduled pending
connect command. This can break some command sequences, so give higher
priority to pending connect operation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-21 13:35:18 +02:00
Jouni Malinen
72d48a80ec P2P: Fix GO start on interface that has active station connection
The active station connection triggered wpa_supplicant AP mode startup
to try to update Beacon IEs before the AP mode was properly initialized
and that resulted in NULL pointer dereference in driver_nl80211.c. Fix
this by skipping the IE update before the AP mode is initialized.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-21 13:34:25 +02:00
Jouni Malinen
b088cf82c9 Android: nl80211: Work around limited genl_ctrl_resolve()
Android ICS system/core/libnl_2 has very limited genl_ctrl_resolve()
implementation that cannot handle names other than nlctrl. Work
around that by implementing more complete genl_ctrl_resolve()
functionality within driver_nl80211.c for Android builds.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-21 13:33:41 +02:00
Neeraj Kumar Garg
653c4893be Add AP-STA-CONNECTED and DISCONNECTED events to wpa_cli -a
Signed-hostap: Neeraj Kumar Garg <neerajkg@broadcom.com>
2011-12-20 01:07:42 +02:00
Jouni Malinen
c81066153c P2P: Use hardcoded idle timeout of 10 seconds in P2P client role
The p2p_group_idle configuration parameter is much more useful for
GO role, so use a separate hardcoded value of 10 seconds in P2P
client role. In practice, this means that the P2P client role will
automatically tear down the group when the GO tears down the group.

The 10 second timeout is enough to recover from temporary disconnections
without unnecessary tearing down the group if the GO is still present
and allows the client to connect.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-18 22:21:22 +02:00
Jouni Malinen
4c2c675173 P2P: Fix disconnect event not to increase idle timeout
When P2P client is processing a disconnection event, make sure the P2P
idle timeout does not get increased, i.e., set a new timeout only if no
timeout is in use. wpa_state changes between DISCONNECTED and SCANNING
can generate multiple calls to wpas_p2p_notif_disconnect() and
previously this was enough to force the idle timeout never hit in
practice when in P2P client role.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-18 22:18:42 +02:00
Jouni Malinen
74781dfc7b Lower RX_MGMT driver event debug level for Beacon frames
This event can be very frequent in AP mode when Beacon frames from
neighboring BSSes are delivered to user space. Drop the debug
message priority from DEBUG to EXCESSIVE for Beacon frames.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-18 21:48:25 +02:00
Ben Greear
300ab0556c Allow linking with libnl-3 (libnl 3.2 and newer)
I needed this patch to compile against the latest
libnl code. I added this to my config file:

CONFIG_LIBNL32=y

Signed-hostap: Ben Greear <greearb@candelatech.com>
2011-12-18 21:12:05 +02:00
Neeraj Kumar Garg
d58ed4e306 P2P: Reduce the idle time in Wait peer connect state
When waiting for go_neg frame from the peer in WAIT_PEER_CONNECT state,
I have observed that sometimes it takes 20 to 30 secs for successful GO
negotiation. I also found out that it is because of 1 second idle time,
in WAIT_PEER_CONNECT state. While it is good to have 1 second idle time
[for doing power-save or doing some other legacy STA Scan or some other
useful stuff], this makes GO Negotiation process slow.

We wait for 1 second idle and then listen for a random time between
100(min)-300(max) ms. Assume P1 is in WAIT_PEER_CONNECT state and P2 is
the one which is now to send go_neg frame. If P2 sends GO Negotiation
frame just at the boundary of 300 ms of P1 and assume that P2 takes
close to 600-800 ms for one iteration of sending go_neg request (one
iteration is GO Negotiation Request frame time + dwell time +
listen_time), P2 needs to transmit at least 16-18 Action frames for
hitting the listen time of P1.

Following patch reduces the idle time to 500 ms. Alternatively we can
increase the listen time interval to 500 ms just for WAIT_PEER_CONNECT
state.
2011-12-18 18:01:11 +02:00
Neeraj Kumar Garg
bfe3557a07 P2P: Fix PROBE_REQ_ONLY flag use for Provision Discovery Request
Provision discovery from a known peer should actually check for
dev->flags & P2P_DEV_PROBE_REQ_ONLY. This is creating an issue of
updating the listen frequency of peer with the PD request frame
frequency. PD request frame will be sent by the peer on our local listen
frequency. This patch fixes that error. Suggested check has already been
implemented in the invitation req receive path.
2011-12-18 17:42:11 +02:00
Jouni Malinen
1ef2f7ffcf P2P: Fix Provision Discovery channel for some join-GO cases
The Provision Discovery Request needs to be sent on the operating
channel of the GO and as such, the frequency from the BSS table
(scan results) need to override the frequency in the P2P peer
table that could be based on the Listen channel of the GO.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-18 17:21:25 +02:00
Gustavo Sverzut Barbieri
19030351b9 wpa_supplicant/dbus AP: Add support for WPS Internal Registrar
When in AP mode, wpa_supplicant is now enabling WPS (only Internal
Registrar). WPS.Start() call can be used to initiate WPS negotiation
similarly to how this is done in station mode.

This was done to ctrl_iface by Jouni Malinen on April 21, 2009 (commit
3ec97afe57)

Signed-hostap: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
2011-12-18 17:06:31 +02:00
Reinette Chatre
e5a359cf7e P2P: Make GO negotiation peer and group information available over D-Bus
The GO negotiation response is very cryptic at the moment. For a success
message we only know on which interface the negotiation succeeded, not
which peer. For a failure we know the interface also and a status code
(number).

It will be very useful for clients to know upon receipt of such a message
which peer the negotiation occurred with.

Now that the peer information is available and the API is changed
already, the function composing the D-Bus message might as well include
all GO negotiation information. This is done with a dict to make things
easier on clients if this result information changes down the line.

Signed-hostap: Reinette Chatre <reinette.chatre@intel.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-18 16:52:33 +02:00
Marek Kwaczynski
2f0c8936bf P2P: Do not include own information in the peer table
When the station is connected to P2P GO after calling p2p_find command
the device sees itself. It is related to lack of filtering itself from
clients connected to P2P GO.

Step by step:
1. dev1: p2p_group_add
2. dev2: p2p_connect <MAC1> pbc join
3. dev1: wps_pbc
4. dev2: p2p_find

Skip P2P client information for our own device from a GO with which
we are connected.
2011-12-18 16:38:48 +02:00
Jouni Malinen
f2fe5b3663 PCSC: Accept 0x67 (Wrong length) as a response to READ RECORD
It looks like some USIM cards respond with 0x67 (Wrong length) instead
of 0x6c to 00 b2 01 04 ff. This was getting rejected in
scard_get_record_len(). ETSI TS 102 221 is not very clear on this
detail, but it looks fine to accept the 0x67 error value, too, to learn
the record length.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-18 14:44:03 +02:00
Jouni Malinen
90b8fc8f4e Fix CONFIG_NO_SCAN_PROCESSING=y build with ctrl_iface
Need to remove ROAM command processing since the needed functionality
for it gets removed with CONFIG_NO_SCAN_PROCESSING=y.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-17 18:07:58 +02:00
Antonio Quartulli
b58bcbb2ef ctrl_iface: Check for IEEE8021X_EAPOL definition
The whole wpa_supplicant_ctrl_iface_ctrl_rsp_handle() function operates
on the ssid->eap field which exists only if IEEE8021X_EAPOL has been
defined. Therefore the whole function body needs to be enclosed within
an #ifdef/endif block.

Signed-hostap: Antonio Quartulli <ordex@autistici.org>
2011-12-17 18:04:50 +02:00
Jouni Malinen
c84b868a71 Make hostapd_eid_wmm_valid() return more logical return values
Return 1/0 instead 0/-1 to indicate valid/invalid element so that
the if statement makes more sense with !wmm_valid().

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-17 12:41:00 +02:00
Jason Young
5d06163714 AP: Pass station's WMM configuration to driver wrappers
This updates a previous patch did more or less the same thing by
providing the qosinfo as a single variable to the driver wrappers.

Signed-hostap: Jason Young <jason.young@dspg.com>
2011-12-17 12:38:06 +02:00
Jouni Malinen
9e088e743d nl80211: Fix memory leaks on nla_put_failure error paths
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-17 12:27:11 +02:00
Jason Young
5883168ae0 nl80211: Fix memory leak on nla_put_failure error paths
Signed-hostap: Jason Young <jason.young@dspg.com>
2011-12-17 12:19:36 +02:00
Eliad Peller
774bfa62ce nl80211: Send uapsd_queues and max_sp values on STA addition
When a new station is added, send its configured WMM params.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-12-17 11:59:34 +02:00
Eliad Peller
5f32f79c6e AP: Add uapsd_queues and max_sp fields
Add uapsd_queues and max_sp fields to sta_info struct,
and pass them to the sta_add callback.

These values are determined by the WMM IE in the (Re)Association Request.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-12-17 11:55:14 +02:00
Eliad Peller
70619a5d8a AP: Consider U-APSD driver support
Check whether the driver advertises support for U-APSD
in AP mode, and evaluate wmm_uapsd only in this case.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-12-17 11:45:53 +02:00
Jouni Malinen
a97bde0af4 Android: Fix PNO start function conversion
The wpa_hexdump_ascii() call did not get converted properly and this
was missed becaused of it getting defined out from the build. Anyway,
this better use the correct variable names should that debug print
ever be enabled for Android.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-15 01:06:02 +02:00
Jouni Malinen
aa543c0c33 nl80211: Fix CONFIG_TDLS=y build
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-12 16:32:07 +02:00
Johannes Berg
457a126e29 IBSS: fix RSN key initialisation
Antonio reported that RSN IBSS failed to work.
We traced it down to a GTK failure, and he then
bisected it to commit bdffdc5ddb:
"AP: Reorder WPA/Beacon initialization".

The reason this commit broke it is that the state
machine's GInit variable is never set to false as
wpa_init_keys() never gets called, and thus new
keys are generated every time the state machine
executes.

Fix this by calling wpa_init_keys() when the new
group has been initialised.

Reported-by: Antonio Quartulli <ordex@autistici.org>
Tested-by: Antonio Quartulli <ordex@autistici.org>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-11 19:57:50 +02:00
Jouni Malinen
671a50392d nl80211: Clean up info on netdev or nl80211 not found errors
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 18:51:55 +02:00
Jouni Malinen
d9d87c3357 Disassociate when starting WPS search
Previously, the WPS scans could have been done in associated state if we
happened to be associated when the request to use WPS was received. This
can slow down scanning and end up in unexpected state if no WPS
association is tried. Avoid these issues by disconnecting when WPS
search is started.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 18:30:47 +02:00
Jouni Malinen
5506d18418 Fix compiler warning with CONFIG_NO_STDOUT_DEBUG=y
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 18:19:24 +02:00
Jouni Malinen
5928411e91 Fix compiler warning with CONFIG_NO_SCAN_PROCESSING=y
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 18:14:09 +02:00
Jouni Malinen
76202aed23 Fix compiler warning with CONFIG_NO_STDOUT_DEBUG=y
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 18:13:51 +02:00
Jouni Malinen
7165c5dc1f P2P: Fix 32-bit compiler warnings on service discovery reference
Convert core wpa_supplicant code to use u64 instead of void * for the
P2P service discovery reference. Use uintptr_t in type casts in
p2p_supplicant.c to handle the conversion without warnings.

Note: This needs to be revisited for 128-bit CPU where sizeof(void *)
could be larger than sizeof(u64).

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 18:06:34 +02:00
Jean-Michel.Bachot
5aff6fc697 P2P: Remove unexpected pending Provision Discovery Request in Search
A Pending Provision Discovery Request was sent in SEARCH phase after a
previous provision discovery timeout. Fix this by resetting the config
method of P2P device in the pending PD reset function. This avoids the
sending of a pending Provision Discovery Request during the next P2P
search.

Signed-off-by: Jean-Michel.Bachot <jean-michelx.bachot@intel.com>
2011-12-11 17:43:17 +02:00
Jouni Malinen
e3a0706b47 P2P: Fix Provision Discovery name in debug messages
Some debug messages used incorrect name for Provision Discovery.
Replace "Provisioning Discovery" with "Provision Discovery".

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 17:36:38 +02:00
Jouni Malinen
36ba8581f7 P2P: Reject Presence Request if current NoA cannot be fetched
It is safer to assume that the driver could be using NoA and reject
any Presence Request unless we are sure that noa NoA is in use.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 17:07:41 +02:00
Michael Braun
05ab9712b9 Allow WPA passphrase to be fetched with RADIUS Tunnel-Password attribute
This allows per-device PSK to be configured for WPA-Personal using a
RADIUS authentication server. This uses RADIUS-based MAC address ACL
(macaddr_acl=2), i.e., Access-Request uses the MAC address of the
station as the User-Name and User-Password. The WPA passphrase is
returned in Tunnel-Password attribute in Access-Accept. This
functionality can be enabled with the new hostapd.conf parameter,
wpa_psk_radius.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2011-12-11 13:01:57 +02:00
Vitaly Wool
c3daaf3325 Skip WPS PBC overlap detection if P2P address is the same
WPS overlap detection can detect false overlap if a P2P peer
changes UUID while authentication is ongoing. Changing UUID
is of course wrong but this is what some popular devices do
so we need to work around it in order to keep compatibility
with these devices. There already is a mechanism in WPS
registrar to skip overlap detection if P2P addresses of two
sessions match but it wasn't really triggered because the
address wasn't filled in in the caller function.

Let's fill in this address and also clean up WPS PBC sessions
on WSC process completion if UUID was changed.

Signed-hostap: Vitaly Wool<vitalywool@gmail.com>
2011-12-11 12:03:18 +02:00
Arik Nemtsov
5ed3354617 nl80211: Send Probe Response template to the driver
Pass the raw Probe Response template to kernel via netlink using the
set_ap() driver callback. The data is sent as one of the Beacon
attributes.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Arik Nemtsov
5b99e21a14 Set driver Probe Response template for AP mode offload
Configure a Probe Response template for drivers that support it. The
template is updated when the Beacon template is updated.

The Probe Response template is propagated to the driver via the set_ap()
callback.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Arik Nemtsov
eacc6b2478 Split Probe Response generation into a separate function
This is needed for Probe Response template, so move the code into a
separate function that can be shared.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Arik Nemtsov
4f73d88afa Maintain internal copy of Probe Response offload capabilities
Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Arik Nemtsov
562c9d976e nl80211: Propagate Probe Response offload capabilities from kernel
Translate nl80211 flags to wpa_supplicant flags for Probe Response
offload support. The existence of the nl80211 PROBE_RESP_OFFLOAD_SUPPORT
attribute means Probe Response offload is supported. The value of the
attribute is a bitmap of supported protocols.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Ben Greear
afcc9ea1a6 AP: Improve disconnect and timeout related logging
This previously helped when debugging some auth issues when hitting the
AP with 128 association attempts all at once.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-12-10 16:34:52 +02:00