mirror of
https://github.com/vanhoefm/fragattacks.git
synced 2025-02-17 17:43:06 -05:00
Add QCA vendor commands/attributes for indoor location
Assign QCA vendor specific commands, attributes, and events for supporting indoor location features. These features include: 1. Fine timing measurement (FTM) - allows measurement of distance between two stations. Based on IEEE P802.11-REVmc/D7.0, 11.24.6 FTM is performed between two stations: one is an initiator, typically a client that wants to measure distance to another AP, and one is a responder, typically an AP which responds to measurement requests from other clients. The responder can be configured to report its location, either in absolute coordinates (LCI) or free-form description (LCR). 2. Angle of arrival (AOA) - allows measurement of azimuth and elevation between two stations. The above features can be combined to allow a station to get an accurate indoor location. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
This commit is contained in:
Lior David
Jouni Malinen
parent
30ee6cc436
commit
fcd85d9a3f
@ -128,6 +128,57 @@ enum qca_radiotap_vendor_ids {
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT: Link layer statistics extension.
|
||||
* enum qca_wlan_vendor_attr_ll_stats_ext attributes are used with this
|
||||
* command and event.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA: Get capabilities for
|
||||
* indoor location features. Capabilities are reported in
|
||||
* QCA_WLAN_VENDOR_ATTR_LOC_CAPA.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION: Start an FTM
|
||||
* (fine timing measurement) session with one or more peers.
|
||||
* Specify Session cookie in QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE and
|
||||
* peer information in QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS.
|
||||
* On success, 0 or more QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT
|
||||
* events will be reported, followed by
|
||||
* QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE event to indicate
|
||||
* end of session.
|
||||
* Refer to IEEE P802.11-REVmc/D7.0, 11.24.6
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION: Abort a running session.
|
||||
* A QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE will be reported with
|
||||
* status code indicating session was aborted.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT: Event with measurement
|
||||
* results for one peer. Results are reported in
|
||||
* QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE: Event triggered when
|
||||
* FTM session is finished, either successfully or aborted by
|
||||
* request.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER: Configure FTM responder
|
||||
* mode. QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE specifies whether
|
||||
* to enable or disable the responder. LCI/LCR reports can be
|
||||
* configured with QCA_WLAN_VENDOR_ATTR_FTM_LCI and
|
||||
* QCA_WLAN_VENDOR_ATTR_FTM_LCR. Can be called multiple
|
||||
* times to update the LCI/LCR reports.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS: Perform a standalone AOA (angle of
|
||||
* arrival) measurement with a single peer. Specify peer MAC address in
|
||||
* QCA_WLAN_VENDOR_ATTR_MAC_ADDR and measurement type in
|
||||
* QCA_WLAN_VENDOR_ATTR_AOA_TYPE. Measurement result is reported in
|
||||
* QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT event.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS: Abort an AOA measurement. Specify
|
||||
* peer MAC address in QCA_WLAN_VENDOR_ATTR_MAC_ADDR.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT: Event that reports
|
||||
* the AOA measurement result.
|
||||
* Peer MAC address reported in QCA_WLAN_VENDOR_ATTR_MAC_ADDR.
|
||||
* success/failure status is reported in
|
||||
* QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS.
|
||||
* Measurement data is reported in QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT.
|
||||
* The antenna array(s) used in the measurement are reported in
|
||||
* QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK.
|
||||
*/
|
||||
enum qca_nl80211_vendor_subcmds {
|
||||
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
|
||||
@ -216,6 +267,16 @@ enum qca_nl80211_vendor_subcmds {
|
||||
QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND = 125,
|
||||
QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY = 126,
|
||||
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT = 127,
|
||||
/* FTM/indoor location subcommands */
|
||||
QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA = 128,
|
||||
QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION = 129,
|
||||
QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION = 130,
|
||||
QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT = 131,
|
||||
QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE = 132,
|
||||
QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER = 133,
|
||||
QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS = 134,
|
||||
QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS = 135,
|
||||
QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT = 136,
|
||||
};
|
||||
|
||||
|
||||
@ -245,6 +306,77 @@ enum qca_wlan_vendor_attr {
|
||||
QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11,
|
||||
/* Unsigned 32-bit value from enum qca_set_band. */
|
||||
QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12,
|
||||
/* Dummy (NOP) attribute for 64 bit padding */
|
||||
QCA_WLAN_VENDOR_ATTR_PAD = 13,
|
||||
/* Unique FTM session cookie (Unsigned 64 bit). Specified in
|
||||
* QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION. Reported in
|
||||
* the session in QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT and
|
||||
* QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE = 14,
|
||||
/* Indoor location capabilities, returned by
|
||||
* QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA.
|
||||
* see enum qca_wlan_vendor_attr_loc_capa.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA = 15,
|
||||
/* Array of nested attributes containing information about each peer
|
||||
* in FTM measurement session. See enum qca_wlan_vendor_attr_peer_info
|
||||
* for supported attributes for each peer.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS = 16,
|
||||
/* Array of nested attributes containing measurement results for
|
||||
* one or more peers, reported by the
|
||||
* QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT event.
|
||||
* See enum qca_wlan_vendor_attr_peer_result for list of supported
|
||||
* attributes.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS = 17,
|
||||
/* Flag attribute for enabling or disabling responder functionality. */
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE = 18,
|
||||
/* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
|
||||
* command to specify the LCI report that will be sent by
|
||||
* the responder during a measurement exchange. The format is
|
||||
* defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.10.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_LCI = 19,
|
||||
/* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
|
||||
* command to specify the location civic report that will
|
||||
* be sent by the responder during a measurement exchange.
|
||||
* The format is defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.13.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_LCR = 20,
|
||||
/* Session/measurement completion status code,
|
||||
* reported in QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE and
|
||||
* QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT
|
||||
* see enum qca_vendor_attr_loc_session_status.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS = 21,
|
||||
/* Initial dialog token used by responder (0 if not specified),
|
||||
* unsigned 8 bit value.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN = 22,
|
||||
/* AOA measurement type. Requested in QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS
|
||||
* and optionally in QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION if
|
||||
* AOA measurements are needed as part of an FTM session.
|
||||
* Reported by QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT. See
|
||||
* enum qca_wlan_vendor_attr_aoa_type.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_AOA_TYPE = 23,
|
||||
/* A bit mask (unsigned 32 bit value) of antenna arrays used
|
||||
* by indoor location measurements. Refers to the antenna
|
||||
* arrays described by QCA_VENDOR_ATTR_LOC_CAPA_ANTENNA_ARRAYS.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK = 24,
|
||||
/* AOA measurement data. Its contents depends on the AOA measurement
|
||||
* type and antenna array mask:
|
||||
* QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: array of U16 values,
|
||||
* phase of the strongest CIR path for each antenna in the measured
|
||||
* array(s).
|
||||
* QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: array of 2 U16
|
||||
* values, phase and amplitude of the strongest CIR path for each
|
||||
* antenna in the measured array(s).
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25,
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1,
|
||||
@ -878,4 +1010,311 @@ enum qca_wlan_vendor_attr_ll_stats_ext {
|
||||
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST - 1
|
||||
};
|
||||
|
||||
/* Attributes for FTM commands and events */
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_loc_capa - Indoor location capabilities
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS: Various flags. See
|
||||
* enum qca_wlan_vendor_attr_loc_capa_flags.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS: Maximum number
|
||||
* of measurement sessions that can run concurrently.
|
||||
* Default is one session (no session concurrency).
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS: The total number of unique
|
||||
* peers that are supported in running sessions. For example,
|
||||
* if the value is 8 and maximum number of sessions is 2, you can
|
||||
* have one session with 8 unique peers, or 2 sessions with 4 unique
|
||||
* peers each, and so on.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP: Maximum number
|
||||
* of bursts per peer, as an exponent (2^value). Default is 0,
|
||||
* meaning no multi-burst support.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST: Maximum number
|
||||
* of measurement exchanges allowed in a single burst.
|
||||
* @QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES: Supported AOA measurement
|
||||
* types. A bit mask (unsigned 32 bit value), each bit corresponds
|
||||
* to an AOA type as defined by enum qca_vendor_attr_aoa_type.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_loc_capa {
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_INVALID,
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST,
|
||||
QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES,
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_MAX =
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_loc_capa_flags: Indoor location capability flags
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER: Set if driver
|
||||
* can be configured as an FTM responder (for example, an AP that
|
||||
* services FTM requests). QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
|
||||
* will be supported if set.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver
|
||||
* can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION
|
||||
* will be supported if set.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder
|
||||
* supports immediate (ASAP) response.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone
|
||||
* AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM: Set if driver supports
|
||||
* requesting AOA measurements as part of an FTM session.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_loc_capa_flags {
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER = 1 << 0,
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR = 1 << 1,
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP = 1 << 2,
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA = 1 << 3,
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM = 1 << 4,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_ftm_peer_info: Information about
|
||||
* a single peer in a measurement session.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR: The MAC address of the peer.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS: Various flags related
|
||||
* to measurement. See enum qca_wlan_vendor_attr_ftm_peer_meas_flags.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAM: Nested attribute of
|
||||
* FTM measurement parameters, as specified by IEEE P802.11-REVmc/D7.0
|
||||
* 9.4.2.167. See enum qca_wlan_vendor_attr_ftm_meas_param for
|
||||
* list of supported attributes.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID: Initial token ID for
|
||||
* secure measurement.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD: Request AOA
|
||||
* measurement every <value> bursts. If 0 or not specified,
|
||||
* AOA measurements will be disabled for this peer.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_ftm_peer_info {
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_INVALID,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAM,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD,
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAX =
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_ftm_peer_meas_flags: Measurement request flags,
|
||||
* per-peer
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP: If set, request
|
||||
* immediate (ASAP) response from peer.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI: If set, request
|
||||
* LCI report from peer. The LCI report includes the absolute
|
||||
* location of the peer in "official" coordinates (similar to GPS).
|
||||
* See IEEE P802.11-REVmc/D7.0, 11.24.6.7 for more information.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR: If set, request
|
||||
* Location civic report from peer. The LCR includes the location
|
||||
* of the peer in free-form format. See IEEE P802.11-REVmc/D7.0,
|
||||
* 11.24.6.7 for more information.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE: If set,
|
||||
* request a secure measurement.
|
||||
* QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID must also be provided.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_ftm_peer_meas_flags {
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP = 1 << 0,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI = 1 << 1,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR = 1 << 2,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE = 1 << 3,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_ftm_meas_param: Measurement parameters
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST: Number of measurements
|
||||
* to perform in a single burst.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP: Number of bursts to
|
||||
* perform, specified as an exponent (2^value).
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION: Duration of burst
|
||||
* instance, as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD: Time between bursts,
|
||||
* as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. Must
|
||||
* be larger than QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_ftm_meas_param {
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_INVALID,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD,
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MAX =
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_ftm_peer_result: Per-peer results
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR: MAC address of the reported
|
||||
* peer.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS: Status of measurement
|
||||
* request for this peer.
|
||||
* See enum qca_wlan_vendor_attr_ftm_peer_result_status.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS: Various flags related
|
||||
* to measurement results for this peer.
|
||||
* See enum qca_wlan_vendor_attr_ftm_peer_result_flags.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS: Specified when
|
||||
* request failed and peer requested not to send an additional request
|
||||
* for this number of seconds.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI: LCI report when received
|
||||
* from peer. In the format specified by IEEE P802.11-REVmc/D7.0,
|
||||
* 9.4.2.22.10.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR: Location civic report when
|
||||
* received from peer. In the format specified by IEEE P802.11-REVmc/D7.0,
|
||||
* 9.4.2.22.13.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS: Reported when peer
|
||||
* overridden some measurement request parameters. See
|
||||
* enum qca_wlan_vendor_attr_ftm_meas_param.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS: AOA measurement
|
||||
* for this peer. Same contents as @QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS: Array of measurement
|
||||
* results. Each entry is a nested attribute defined
|
||||
* by enum qca_wlan_vendor_attr_ftm_meas.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_ftm_peer_result {
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_INVALID,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS,
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAX =
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_ftm_peer_result_status
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK: Request sent ok and results
|
||||
* will be provided. Peer may have overridden some measurement parameters,
|
||||
* in which case overridden parameters will be report by
|
||||
* QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAM attribute.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE: Peer is incapable
|
||||
* of performing the measurement request. No more results will be sent
|
||||
* for this peer in this session.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED: Peer reported request
|
||||
* failed, and requested not to send an additional request for number
|
||||
* of seconds specified by QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS
|
||||
* attribute.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID: Request validation
|
||||
* failed. Request was not sent over the air.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_ftm_peer_result_status {
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_ftm_peer_result_flags: Various flags
|
||||
* for measurement result, per-peer
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE: If set,
|
||||
* measurement completed for this peer. No more results will be reported
|
||||
* for this peer in this session.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_ftm_peer_result_flags {
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE = 1 << 0,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_vendor_attr_loc_session_status: Session completion status code
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK: Session completed
|
||||
* successfully.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED: Session aborted
|
||||
* by request.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID: Session request
|
||||
* was invalid and was not started.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED: Session had an error
|
||||
* and did not complete normally (for example out of resources).
|
||||
*/
|
||||
enum qca_vendor_attr_loc_session_status {
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK,
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED,
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID,
|
||||
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_ftm_meas: Single measurement data
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1: Time of departure (TOD) of FTM packet as
|
||||
* recorded by responder, in picoseconds.
|
||||
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2: Time of arrival (TOA) of FTM packet at
|
||||
* initiator, in picoseconds.
|
||||
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3: TOD of ACK packet as recorded by
|
||||
* initiator, in picoseconds.
|
||||
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4: TOA of ACK packet at
|
||||
* responder, in picoseconds.
|
||||
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI: RSSI (signal level) as recorded
|
||||
* during this measurement exchange. Optional and will be provided if
|
||||
* the hardware can measure it.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR: TOD error reported by
|
||||
* responder. Not always provided.
|
||||
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR: TOA error reported by
|
||||
* responder. Not always provided.
|
||||
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR: TOD error measured by
|
||||
* initiator. Not always provided.
|
||||
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR: TOA error measured by
|
||||
* initiator. Not always provided.
|
||||
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
|
||||
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD: Dummy attribute for padding.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_ftm_meas {
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD,
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_MAX =
|
||||
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_aoa_type - AOA measurement type
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: Phase of the strongest
|
||||
* CIR (channel impulse response) path for each antenna.
|
||||
* @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: Phase and amplitude
|
||||
* of the strongest CIR path for each antenna.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_aoa_type {
|
||||
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE,
|
||||
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP,
|
||||
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_MAX
|
||||
};
|
||||
|
||||
#endif /* QCA_VENDOR_H */
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user