Do not set own_disconnect_req flag if not connected

This fixes some issues where a disconnection event may get ignored if an
earlier operation to remove or disable a network resulted in an attempt
to disconnect event though no connection was in place.
wpa_s->current_ssid != NULL alone is not sufficient to determine that
there will be a driver event notifying completion of such disconnection
request. Set own_disconnect_req to 1 only if wpa_s->wpa_state is also
indicating that there is a connection or an attempt to complete one.

This showed up in a failure, e.g., when running the hwsim test case
scan_int followed by ap_vlan_wpa2_psk_radius_required where the latter
ended up not processing a connection failure event and getting stuck not
trying to run a new scan and connection attempt.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
This commit is contained in:
Jouni Malinen 2015-06-10 15:40:35 +03:00 committed by Jouni Malinen
parent 8d2ed87d82
commit e66bcedd3e
2 changed files with 8 additions and 4 deletions

View File

@ -2876,7 +2876,8 @@ static int wpa_supplicant_ctrl_iface_remove_network(
#endif /* CONFIG_SME */
wpa_sm_set_config(wpa_s->wpa, NULL);
eapol_sm_notify_config(wpa_s->eapol, NULL, NULL);
wpa_s->own_disconnect_req = 1;
if (wpa_s->wpa_state >= WPA_AUTHENTICATING)
wpa_s->own_disconnect_req = 1;
wpa_supplicant_deauthenticate(
wpa_s, WLAN_REASON_DEAUTH_LEAVING);
}
@ -2923,7 +2924,8 @@ static int wpa_supplicant_ctrl_iface_remove_network(
wpa_sm_set_config(wpa_s->wpa, NULL);
eapol_sm_notify_config(wpa_s->eapol, NULL, NULL);
wpa_s->own_disconnect_req = 1;
if (wpa_s->wpa_state >= WPA_AUTHENTICATING)
wpa_s->own_disconnect_req = 1;
wpa_supplicant_deauthenticate(wpa_s,
WLAN_REASON_DEAUTH_LEAVING);
}

View File

@ -873,7 +873,8 @@ int wpa_supplicant_reload_configuration(struct wpa_supplicant *wpa_s)
eapol_sm_invalidate_cached_session(wpa_s->eapol);
if (wpa_s->current_ssid) {
wpa_s->own_disconnect_req = 1;
if (wpa_s->wpa_state >= WPA_AUTHENTICATING)
wpa_s->own_disconnect_req = 1;
wpa_supplicant_deauthenticate(wpa_s,
WLAN_REASON_DEAUTH_LEAVING);
}
@ -2604,7 +2605,8 @@ void wpa_supplicant_select_network(struct wpa_supplicant *wpa_s,
int disconnected = 0;
if (ssid && ssid != wpa_s->current_ssid && wpa_s->current_ssid) {
wpa_s->own_disconnect_req = 1;
if (wpa_s->wpa_state >= WPA_AUTHENTICATING)
wpa_s->own_disconnect_req = 1;
wpa_supplicant_deauthenticate(
wpa_s, WLAN_REASON_DEAUTH_LEAVING);
disconnected = 1;