Amazing-Mirror/fragattacks
1
0
Fork 0
mirror of https://github.com/vanhoefm/fragattacks.git synced 2024-11-25 16:58:41 -05:00
Code Issues Projects Releases Wiki Activity

Use signal quality if level is not available for comparing max rates

Browse Source 
Some drivers (for example ipw2100) do not report signal level but only
signal quality. wpa_supplicant already uses the signal quality if no
level is reported and all other comparision parameters are equal to sort
the scan results. However, if two APs have different max rates and the
signal level does not differ much wpa_supplicant chooses the AP with the
higher max rate.

In case of ipw2100 no signal level is reported and thus wpa_supplicant
always takes the AP with higher max rate even if its signal quality is
really low. For example if AP1 (max rate 11Mb/s, 80% signal quality) and
AP2 (max rate 54 Mb/s, 20% signal quality) are found by a scan
wpa_supplicant would choose AP2.

Hence, if no signal level is reported depend on the signal quality if
max rate should be compared. A quality difference of 10% is considered
acceptable in favor of the higher max rate.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
This commit is contained in:
Helmut Schaa 2009-02-10 13:47:14 +02:00 committed by Jouni Malinen
parent 073ab58ff5
commit e1b525c356
1 changed files with 7 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
src/drivers/scan_helpers.c
View File

@ -156,10 +156,13 @@ static int wpa_scan_result_compar(const void *a, const void *b)
return -1;
/* best/max rate preferred if signal level close enough XXX */
maxrate_a = wpa_scan_get_max_rate(wa);
maxrate_b = wpa_scan_get_max_rate(wb);
if (maxrate_a != maxrate_b && abs(wb->level - wa->level) < 5)
return maxrate_b - maxrate_a;
if ((wa->level && wb->level && abs(wb->level - wa->level) < 5) ||
(wa->qual && wb->qual && abs(wb->qual - wa->qual) < 10)) {
maxrate_a = wpa_scan_get_max_rate(wa);
maxrate_b = wpa_scan_get_max_rate(wb);
if (maxrate_a != maxrate_b)
return maxrate_b - maxrate_a;
}
/* use freq for channel preference */