Amazing-Mirror/fragattacks
1
0
Fork 0
mirror of https://github.com/vanhoefm/fragattacks.git synced 2024-11-28 10:18:21 -05:00
Code Issues Projects Releases Wiki Activity

hostapd: Add Multi-AP protocol support

Browse Source 
The purpose of Multi-AP specification is to enable inter-operability
across Wi-Fi access points (APs) from different vendors.

This patch introduces one new configuration parameter 'multi_ap' to
enable Multi-AP functionality and to configure the BSS as a backhaul
and/or fronthaul BSS.

Advertise vendor specific Multi-AP capabilities in (Re)Association
Response frame, if Multi-AP functionality is enabled through the
configuration parameter.

A backhaul AP must support receiving both 3addr and 4addr frames from a
backhaul STA, so create a VLAN for it just like is done for WDS, i.e.,
by calling hostapd_set_wds_sta(). Since Multi-AP requires WPA2 (never
WEP), we can safely call hostapd_set_wds_encryption() as well and we can
reuse the entire WDS condition.

To parse the Multi-AP Extension subelement, we use get_ie(): even though
that function is meant for parsing IEs, it works for subelements.

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit is contained in:
Venkateswara Naralasetty 2018-12-05 11:23:51 +01:00 committed by Jouni Malinen
parent 3006241e43
commit 9c06f0f6ae
9 changed files with 134 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
hostapd/config_file.c
View File

@ -4130,6 +4130,16 @@ static int hostapd_config_fill(struct hostapd_config *conf,
} else if (os_strcmp(buf, "coloc_intf_reporting") == 0) {
bss->coloc_intf_reporting = atoi(pos);
#endif /* CONFIG_OWE */
} else if (os_strcmp(buf, "multi_ap") == 0) {
int val = atoi(pos);
if (val < 0 || val > 3) {
wpa_printf(MSG_ERROR, "Line %d: Invalid multi_ap '%s'",
line, buf);
return -1;
}
bss->multi_ap = val;
} else {
wpa_printf(MSG_ERROR,
"Line %d: unknown configuration item '%s'",

7
hostapd/hostapd.conf
View File

@ -438,6 +438,13 @@ wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
# Note: for IEEE 802.11b mode: cWmin=3 cWmax=4 burst=102
# Enable Multi-AP functionality
# 0 = disabled (default)
# 1 = AP support backhaul BSS
# 2 = AP support fronthaul BSS
# 3 = AP supports both backhaul BSS and fronthaul BSS
#multi_ap=0
# Static WEP key configuration
#
# The key number to use when transmitting.

4
src/ap/ap_config.h
View File

@ -694,6 +694,10 @@ struct hostapd_bss_config {
int coloc_intf_reporting;
u8 send_probe_response;
#define BACKHAUL_BSS 1
#define FRONTHAUL_BSS 2
int multi_ap; /* bitmap of BACKHAUL_BSS, FRONTHAUL_BSS */
};
/**

77
src/ap/ieee802_11.c
View File

@ -63,6 +63,22 @@ prepare_auth_resp_fils(struct hostapd_data *hapd,
int *is_pub);
#endif /* CONFIG_FILS */
u8 * hostapd_eid_multi_ap(struct hostapd_data *hapd, u8 *eid)
{
u8 multi_ap_val = 0;
if (!hapd->conf->multi_ap)
return eid;
if (hapd->conf->multi_ap & BACKHAUL_BSS)
multi_ap_val |= MULTI_AP_BACKHAUL_BSS;
if (hapd->conf->multi_ap & FRONTHAUL_BSS)
multi_ap_val |= MULTI_AP_FRONTHAUL_BSS;
return eid + add_multi_ap_ie(eid, 9, multi_ap_val);
}
u8 * hostapd_eid_supp_rates(struct hostapd_data *hapd, u8 *eid)
{
u8 *pos = eid;
@ -2211,6 +2227,57 @@ static u16 check_wmm(struct hostapd_data *hapd, struct sta_info *sta,
return WLAN_STATUS_SUCCESS;
}
static u16 check_multi_ap(struct hostapd_data *hapd, struct sta_info *sta,
const u8 *multi_ap_ie, size_t multi_ap_len)
{
u8 multi_ap_value = 0;
sta->flags &= ~WLAN_STA_MULTI_AP;
if (!hapd->conf->multi_ap)
return WLAN_STATUS_SUCCESS;
if (multi_ap_ie) {
const u8 *multi_ap_subelem;
multi_ap_subelem = get_ie(multi_ap_ie + 4,
multi_ap_len - 4,
MULTI_AP_SUB_ELEM_TYPE);
if (multi_ap_subelem && multi_ap_subelem[1] == 1) {
multi_ap_value = multi_ap_subelem[2];
} else {
hostapd_logger(hapd, sta->addr,
HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO,
"Multi-AP IE has missing or invalid Multi-AP subelement");
return WLAN_STATUS_INVALID_IE;
}
}
if (multi_ap_value == MULTI_AP_BACKHAUL_STA)
sta->flags |= WLAN_STA_MULTI_AP;
if ((hapd->conf->multi_ap & BACKHAUL_BSS) &&
multi_ap_value == MULTI_AP_BACKHAUL_STA)
return WLAN_STATUS_SUCCESS;
if (hapd->conf->multi_ap & FRONTHAUL_BSS) {
if (multi_ap_value == MULTI_AP_BACKHAUL_STA) {
hostapd_logger(hapd, sta->addr,
HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO,
"Backhaul STA tries to associate with fronthaul-only BSS");
return WLAN_STATUS_ASSOC_DENIED_UNSPEC;
}
return WLAN_STATUS_SUCCESS;
}
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO,
"Non-Multi-AP STA tries to associate with backhaul-only BSS");
return WLAN_STATUS_ASSOC_DENIED_UNSPEC;
}
static u16 copy_supp_rates(struct hostapd_data *hapd, struct sta_info *sta,
struct ieee802_11_elems *elems)
@ -2467,6 +2534,11 @@ static u16 check_assoc_ies(struct hostapd_data *hapd, struct sta_info *sta,
resp = copy_supp_rates(hapd, sta, &elems);
if (resp != WLAN_STATUS_SUCCESS)
return resp;
resp = check_multi_ap(hapd, sta, elems.multi_ap, elems.multi_ap_len);
if (resp != WLAN_STATUS_SUCCESS)
return resp;
#ifdef CONFIG_IEEE80211N
resp = copy_sta_ht_capab(hapd, sta, elems.ht_capabilities);
if (resp != WLAN_STATUS_SUCCESS)
@ -3040,6 +3112,9 @@ static u16 send_assoc_resp(struct hostapd_data *hapd, struct sta_info *sta,
}
#endif /* CONFIG_WPS */
if (sta && (sta->flags & WLAN_STA_MULTI_AP))
p = hostapd_eid_multi_ap(hapd, p);
#ifdef CONFIG_P2P
if (sta && sta->p2p_ie && hapd->p2p_group) {
struct wpabuf *p2p_resp_ie;
@ -4291,7 +4366,7 @@ static void handle_assoc_cb(struct hostapd_data *hapd,
sta->flags |= WLAN_STA_WDS;
}
if (sta->flags & WLAN_STA_WDS) {
if (sta->flags & (WLAN_STA_WDS | WLAN_STA_MULTI_AP)) {
int ret;
char ifname_wds[IFNAMSIZ + 1];

2
src/ap/sta_info.c
View File

@ -166,7 +166,7 @@ void ap_free_sta(struct hostapd_data *hapd, struct sta_info *sta)
/* just in case */
ap_sta_set_authorized(hapd, sta, 0);
if (sta->flags & WLAN_STA_WDS)
if (sta->flags & (WLAN_STA_WDS | WLAN_STA_MULTI_AP))
hostapd_set_wds_sta(hapd, NULL, sta->addr, sta->aid, 0);
if (sta->ipaddr)

1
src/ap/sta_info.h
View File

@ -36,6 +36,7 @@
#define WLAN_STA_VHT_OPMODE_ENABLED BIT(20)
#define WLAN_STA_VENDOR_VHT BIT(21)
#define WLAN_STA_PENDING_FILS_ERP BIT(22)
#define WLAN_STA_MULTI_AP BIT(23)
#define WLAN_STA_PENDING_DISASSOC_CB BIT(29)
#define WLAN_STA_PENDING_DEAUTH_CB BIT(30)
#define WLAN_STA_NONERP BIT(31)

24
src/common/ieee802_11_common.c
View File

@ -126,6 +126,10 @@ static int ieee802_11_parse_vendor_specific(const u8 *pos, size_t elen,
elems->roaming_cons_sel = pos;
elems->roaming_cons_sel_len = elen;
break;
case MULTI_AP_OUI_TYPE:
elems->multi_ap = pos;
elems->multi_ap_len = elen;
break;
default:
wpa_printf(MSG_MSGDUMP, "Unknown WFA "
"information element ignored "
@ -1558,6 +1562,26 @@ size_t mbo_add_ie(u8 *buf, size_t len, const u8 *attr, size_t attr_len)
}
size_t add_multi_ap_ie(u8 *buf, size_t len, u8 value)
{
u8 *pos = buf;
if (len < 9)
return 0;
*pos++ = WLAN_EID_VENDOR_SPECIFIC;
*pos++ = 7; /* len */
WPA_PUT_BE24(pos, OUI_WFA);
pos += 3;
*pos++ = MULTI_AP_OUI_TYPE;
*pos++ = MULTI_AP_SUB_ELEM_TYPE;
*pos++ = 1; /* len */
*pos++ = value;
return pos - buf;
}
static const struct country_op_class us_op_class[] = {
{ 1, 115 },
{ 2, 118 },

4
src/common/ieee802_11_common.h
View File

@ -86,6 +86,7 @@ struct ieee802_11_elems {
const u8 *roaming_cons_sel;
const u8 *password_id;
const u8 *oci;
const u8 *multi_ap;
u8 ssid_len;
u8 supp_rates_len;
@ -133,6 +134,7 @@ struct ieee802_11_elems {
u8 roaming_cons_sel_len;
u8 password_id_len;
u8 oci_len;
u8 multi_ap_len;
struct mb_ies_info mb_ies;
};
@ -194,6 +196,8 @@ const u8 * get_ie_ext(const u8 *ies, size_t len, u8 ext);
size_t mbo_add_ie(u8 *buf, size_t len, const u8 *attr, size_t attr_len);
size_t add_multi_ap_ie(u8 *buf, size_t len, u8 value);
struct country_op_class {
u8 country_op_class;
u8 global_op_class;

7
src/common/ieee802_11_defs.h
View File

@ -1213,6 +1213,13 @@ struct ieee80211_ampe_ie {
#define MBO_OUI_TYPE 22
#define OWE_IE_VENDOR_TYPE 0x506f9a1c
#define OWE_OUI_TYPE 28
#define MULTI_AP_OUI_TYPE 0x1B
#define MULTI_AP_SUB_ELEM_TYPE 0x06
#define MULTI_AP_TEAR_DOWN BIT(4)
#define MULTI_AP_FRONTHAUL_BSS BIT(5)
#define MULTI_AP_BACKHAUL_BSS BIT(6)
#define MULTI_AP_BACKHAUL_STA BIT(7)
#define WMM_OUI_TYPE 2
#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0