tests: DPP bootstrapping info channel list

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
This commit is contained in:
Jouni Malinen 2017-11-12 12:17:32 +02:00 committed by Jouni Malinen
parent f97ace34cb
commit 751f7f7c42

View File

@ -2801,3 +2801,99 @@ def test_dpp_proto_network_introduction(dev, apdev):
dev[0].connect("dpp", key_mgmt="DPP", scan_freq="2412", ieee80211w="2",
dpp_csign=csign, dpp_connector=sta_connector,
dpp_netaccesskey=sta_netaccesskey)
def test_dpp_qr_code_no_chan_list_unicast(dev, apdev):
"""DPP QR Code and no channel list (unicast)"""
run_dpp_qr_code_chan_list(dev, apdev, True, 2417, None)
def test_dpp_qr_code_chan_list_unicast(dev, apdev):
"""DPP QR Code and 2.4 GHz channels (unicast)"""
run_dpp_qr_code_chan_list(dev, apdev, True, 2417,
"81/1,81/2,81/3,81/4,81/5,81/6,81/7,81/8,81/9,81/10,81/11,81/12,81/13")
def test_dpp_qr_code_chan_list_no_peer_unicast(dev, apdev):
"""DPP QR Code and channel list and no peer (unicast)"""
run_dpp_qr_code_chan_list(dev, apdev, True, 2417, "81/1,81/6,81/11",
no_wait=True)
ev = dev[1].wait_event(["DPP-AUTH-INIT-FAILED"], timeout=5)
if ev is None:
raise Exception("Initiation failure not reported")
def test_dpp_qr_code_no_chan_list_broadcast(dev, apdev):
"""DPP QR Code and no channel list (broadcast)"""
run_dpp_qr_code_chan_list(dev, apdev, False, 2412, None)
def test_dpp_qr_code_chan_list_broadcast(dev, apdev):
"""DPP QR Code and some 2.4 GHz channels (broadcast)"""
run_dpp_qr_code_chan_list(dev, apdev, False, 2412, "81/1,81/6,81/11",
timeout=10)
def run_dpp_qr_code_chan_list(dev, apdev, unicast, listen_freq, chanlist,
no_wait=False, timeout=5):
check_dpp_capab(dev[0])
check_dpp_capab(dev[1])
dev[1].set("dpp_init_max_tries", "3")
dev[1].set("dpp_init_retry_time", "100")
dev[1].set("dpp_resp_wait_time", "1")
logger.info("dev0 displays QR Code")
cmd = "DPP_BOOTSTRAP_GEN type=qrcode"
if chanlist:
cmd += " chan=" + chanlist
if unicast:
addr = dev[0].own_addr().replace(':', '')
cmd += " mac=" + addr
res = dev[0].request(cmd)
if "FAIL" in res:
raise Exception("Failed to generate bootstrapping info")
id0 = int(res)
uri0 = dev[0].request("DPP_BOOTSTRAP_GET_URI %d" % id0)
logger.info("dev1 scans QR Code")
res = dev[1].request("DPP_QR_CODE " + uri0)
if "FAIL" in res:
raise Exception("Failed to parse QR Code URI")
id1 = int(res)
logger.info("dev1 initiates DPP Authentication")
cmd = "DPP_LISTEN %d" % listen_freq
if "OK" not in dev[0].request(cmd):
raise Exception("Failed to start listen operation")
cmd = "DPP_AUTH_INIT peer=%d" % id1
if "OK" not in dev[1].request(cmd):
raise Exception("Failed to initiate DPP Authentication")
if no_wait:
return
ev = dev[0].wait_event(["DPP-AUTH-SUCCESS"], timeout=timeout)
if ev is None:
raise Exception("DPP authentication did not succeed (Responder)")
ev = dev[1].wait_event(["DPP-AUTH-SUCCESS"], timeout=5)
if ev is None:
raise Exception("DPP authentication did not succeed (Initiator)")
ev = dev[0].wait_event(["DPP-CONF-RECEIVED", "DPP-CONF-FAILED"], timeout=5)
if ev is None:
raise Exception("DPP configuration not completed (Enrollee)")
dev[0].request("DPP_STOP_LISTEN")
dev[0].dump_monitor()
dev[1].dump_monitor()
def test_dpp_qr_code_chan_list_no_match(dev, apdev):
"""DPP QR Code and no matching supported channel"""
check_dpp_capab(dev[0])
check_dpp_capab(dev[1])
cmd = "DPP_BOOTSTRAP_GEN type=qrcode chan=123/123"
res = dev[0].request(cmd)
if "FAIL" in res:
raise Exception("Failed to generate bootstrapping info")
id0 = int(res)
uri0 = dev[0].request("DPP_BOOTSTRAP_GET_URI %d" % id0)
res = dev[1].request("DPP_QR_CODE " + uri0)
if "FAIL" in res:
raise Exception("Failed to parse QR Code URI")
id1 = int(res)
cmd = "DPP_AUTH_INIT peer=%d" % id1
if "FAIL" not in dev[1].request(cmd):
raise Exception("DPP Authentication started unexpectedly")