Android: Sync build configuration with defconfig changes

This brings up the changes from defconfig into the Android configuration
file, but does not change any of the actual build parameters.

Signed-hostap: Jouni Malinen <j@w1.fi>

wpa_supplicant/android.config

@@ -55,11 +55,6 @@
 # Set include directory to the madwifi source tree
 #CFLAGS += -I../../madwifi
 
-# Driver interface for Prism54 driver
-# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
-# for developers only)
-#CONFIG_DRIVER_PRISM54=y
-
 # Driver interface for ndiswrapper
 # Deprecated; use CONFIG_DRIVER_WEXT=y instead.
 #CONFIG_DRIVER_NDISWRAPPER=y
@@ -83,6 +78,11 @@
 #CONFIG_DRIVER_RALINK=y
 
 # Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
 #CONFIG_DRIVER_WEXT=y
 
 # Driver interface for Linux drivers using the nl80211 kernel interface
@@ -93,6 +93,8 @@ CONFIG_LIBNL20=y
 #CONFIG_DRIVER_BSD=y
 #CFLAGS += -I/usr/local/include
 #LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
 
 # Driver interface for Windows NDIS
 #CONFIG_DRIVER_NDIS=y
@@ -113,11 +115,6 @@ CONFIG_LIBNL20=y
 # Driver interface for development testing
 #CONFIG_DRIVER_TEST=y
 
-# Include client MLME (management frame processing) for test driver
-# This can be used to test MLME operations in hostapd with the test interface.
-# space.
-#CONFIG_CLIENT_MLME=y
-
 # Driver interface for wired Ethernet drivers
 #CONFIG_DRIVER_WIRED=y
 
@@ -127,6 +124,10 @@ CONFIG_LIBNL20=y
 # Driver interface for no driver (e.g., WPS ER only)
 #CONFIG_DRIVER_NONE=y
 
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
 # included)
 CONFIG_IEEE8021X_EAPOL=y
@@ -165,6 +166,9 @@ CONFIG_EAP_SIM=y
 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
 #CONFIG_EAP_PSK=y
 
+# EAP-pwd (secure authentication using only a password)
+CONFIG_EAP_PWD=y
+
 # EAP-PAX
 #CONFIG_EAP_PAX=y
 
@@ -196,13 +200,15 @@ CONFIG_EAP_LEAP=y
 CONFIG_WPS=y
 # Enable WSC 2.0 support
 CONFIG_WPS2=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
 
 # EAP-IKEv2
 #CONFIG_EAP_IKEV2=y
 
-# EAP-PWD
-CONFIG_EAP_PWD=y
-
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 CONFIG_PKCS12=y
@@ -215,6 +221,9 @@ CONFIG_SMARTCARD=y
 # Enable this if EAP-SIM or EAP-AKA is included
 #CONFIG_PCSC=y
 
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+#CONFIG_HT_OVERRIDES=y
+
 # Development testing
 #CONFIG_EAPOL_TEST=y
 
@@ -298,6 +307,9 @@ CONFIG_OS=unix
 # eloop_none = Empty template
 CONFIG_ELOOP=eloop
 
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
 # Select layer 2 packet implementation
 # linux = Linux packet socket (default)
 # pcap = libpcap/libdnet/WinPcap
@@ -318,18 +330,24 @@ CONFIG_PEERKEY=y
 
 # Select TLS implementation
 # openssl = OpenSSL (default)
-# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# gnutls = GnuTLS
 # internal = Internal TLSv1 implementation (experimental)
 # none = Empty template
 #CONFIG_TLS=openssl
 
-# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
-# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
-# even though the core GnuTLS library is released under LGPL, this extra
-# library uses GPL and as such, the terms of GPL apply to the combination
-# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
-# apply for distribution of the resulting binary.
-#CONFIG_GNUTLS_EXTRA=y
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
 
 # If CONFIG_TLS=internal is used, additional library and include paths are
 # needed for LibTomMath. Alternatively, an integrated, minimal version of
@@ -361,7 +379,7 @@ CONFIG_PEERKEY=y
 # (fi.w1.hostap.wpa_supplicant1)
 #CONFIG_CTRL_IFACE_DBUS_NEW=y
 
-# Add introspection support for new DBus control interface (requires libxml2)
+# Add introspection support for new DBus control interface
 #CONFIG_CTRL_IFACE_DBUS_INTRO=y
 
 # Add support for loading EAP methods dynamically as shared libraries.
@@ -391,7 +409,19 @@ CONFIG_PEERKEY=y
 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
 #CONFIG_DEBUG_FILE=y
 
-# Add support for writing debug log to Android logcat instead of standard output
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
 CONFIG_ANDROID_LOG=y
 
 # Enable privilege separation (see README 'Privilege separation' for details)
@@ -401,11 +431,67 @@ CONFIG_ANDROID_LOG=y
 # MIC error reports by a random amount of time between 0 and 60 seconds
 #CONFIG_DELAYED_MIC_ERROR_REPORT=y
 
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+CONFIG_IEEE80211N=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
 # Disable roaming in wpa_supplicant
 CONFIG_NO_ROAMING=y
 
 # Enable P2P
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-CONFIG_IEEE80211N=y
 CONFIG_P2P=y
 CONFIG_AP=y