tests: AP and STA tracking with passive scan

Verify that Public Action frame from a STA is used to add a tracking
entry.

Signed-off-by: Jouni Malinen <j@w1.fi>

tests/hwsim/test_ap_track.py

@@ -159,6 +159,63 @@ def _test_ap_track_sta_no_auth(dev, apdev):
         raise Exception("No Neighbor Report element: " + ev)
     dev[0].request("DISCONNECT")
 
+def test_ap_track_sta_no_auth_passive(dev, apdev):
+    """AP rejecting authentication from dualband STA on 2.4 GHz (passive)"""
+    try:
+        _test_ap_track_sta_no_auth_passive(dev, apdev)
+    finally:
+        subprocess.call(['iw', 'reg', 'set', '00'])
+
+def _test_ap_track_sta_no_auth_passive(dev, apdev):
+    dev[0].flush_scan_cache()
+
+    params = { "ssid": "track",
+               "country_code": "US",
+               "hw_mode": "g",
+               "channel": "6",
+               "no_auth_if_seen_on": apdev[1]['ifname'] }
+    hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+    bssid = apdev[0]['bssid']
+
+    params = { "ssid": "track",
+               "country_code": "US",
+               "hw_mode": "a",
+               "channel": "40",
+               "interworking": "1",
+               "venue_name": "eng:Venue",
+               "track_sta_max_num": "100" }
+    hapd2 = hostapd.add_ap(apdev[1]['ifname'], params)
+    bssid2 = apdev[1]['bssid']
+
+    dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
+    for i in range(10):
+        dev[0].request("SCAN freq=5200 passive=1")
+        ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=5)
+        if ev is None:
+            raise Exception("Scan did not complete")
+        if dev[0].get_bss(bssid2):
+            break
+        if i == 9:
+            raise Exception("AP not found with passive scans")
+
+    if "OK" not in dev[0].request("ANQP_GET " + bssid2 + " 258"):
+        raise Exception("ANQP_GET command failed")
+    ev = dev[0].wait_event(["RX-ANQP"], timeout=1)
+    if ev is None or "Venue Name" not in ev:
+        raise Exception("Did not receive Venue Name")
+
+    dev[0].connect("track", key_mgmt="NONE", scan_freq="2437",
+                   freq_list="2437", wait_connect=False)
+    ev = dev[0].wait_event([ "CTRL-EVENT-CONNECTED",
+                             "CTRL-EVENT-AUTH-REJECT" ], timeout=10)
+    if ev is None:
+        raise Exception("Unknown connection result")
+    if "CTRL-EVENT-CONNECTED" in ev:
+        raise Exception("Unexpected connection")
+    if "status_code=82" not in ev:
+        raise Exception("Unexpected rejection reason: " + ev)
+    dev[0].request("DISCONNECT")
+
 def test_ap_track_sta_force_5ghz(dev, apdev):
     """Dualband AP forcing dualband STA to connect on 5 GHz"""
     try: