mirror of
https://github.com/vanhoefm/fragattacks.git
synced 2024-11-25 00:38:24 -05:00
QCA vendor command to enable host driver offload ACS to user space
This commit introduces the QCA vendor command and the attributes which facilitate the host driver to use an external user space entity for performing automatic channel selection. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
This commit is contained in:
Purushottam Kushwaha
Jouni Malinen
parent
6363396325
commit
4c4070005a
@ -243,6 +243,18 @@ enum qca_radiotap_vendor_ids {
|
||||
* FCC compliance, OEMs require methods to set SAR limits on TX
|
||||
* power of WLAN/WWAN. enum qca_vendor_attr_sar_limits
|
||||
* attributes are used with this command.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS: This command/event is used by the
|
||||
* host driver for offloading the implementation of Auto Channel Selection
|
||||
* (ACS) to an external user space entity. This interface is used as the
|
||||
* event from the host driver to the user space entity and also as the
|
||||
* request from the user space entity to the host driver. The event from
|
||||
* the host driver is used by the user space entity as an indication to
|
||||
* start the ACS functionality. The attributes used by this event are
|
||||
* represented by the enum qca_wlan_vendor_attr_external_acs_event.
|
||||
* User space entity uses the same interface to inform the host driver with
|
||||
* selected channels after the ACS operation using the attributes defined
|
||||
* by enum qca_wlan_vendor_attr_external_acs_channels.
|
||||
*/
|
||||
enum qca_nl80211_vendor_subcmds {
|
||||
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
|
||||
@ -364,6 +376,7 @@ enum qca_nl80211_vendor_subcmds {
|
||||
/* 144 - reserved for QCA */
|
||||
QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN = 145,
|
||||
QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146,
|
||||
QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS = 147,
|
||||
};
|
||||
|
||||
|
||||
@ -2940,4 +2953,252 @@ enum qca_wlan_vendor_attr_pno_config_params {
|
||||
QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* qca_wlan_vendor_acs_select_reason: This represents the different reasons why
|
||||
* the ACS has to be triggered. These values are used by
|
||||
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON and
|
||||
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON
|
||||
*/
|
||||
enum qca_wlan_vendor_acs_select_reason {
|
||||
/* Represents the reason that the ACS triggered during the AP start */
|
||||
QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT,
|
||||
/* Represents the reason that DFS found with the current channel */
|
||||
QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS,
|
||||
/* Represents the reason that LTE co-exist in the current band. */
|
||||
QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX,
|
||||
};
|
||||
|
||||
/**
|
||||
* qca_wlan_vendor_channel_prop_flags: This represent the flags for a channel.
|
||||
* This is used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS.
|
||||
*/
|
||||
enum qca_wlan_vendor_channel_prop_flags {
|
||||
/* Bits 0, 1, 2, and 3 are reserved */
|
||||
|
||||
/* Turbo channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_TURBO = 1 << 4,
|
||||
/* CCK channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_CCK = 1 << 5,
|
||||
/* OFDM channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_OFDM = 1 << 6,
|
||||
/* 2.4 GHz spectrum channel. */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_2GHZ = 1 << 7,
|
||||
/* 5 GHz spectrum channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_5GHZ = 1 << 8,
|
||||
/* Only passive scan allowed */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_PASSIVE = 1 << 9,
|
||||
/* Dynamic CCK-OFDM channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_DYN = 1 << 10,
|
||||
/* GFSK channel (FHSS PHY) */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_GFSK = 1 << 11,
|
||||
/* Radar found on channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_RADAR = 1 << 12,
|
||||
/* 11a static turbo channel only */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_STURBO = 1 << 13,
|
||||
/* Half rate channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HALF = 1 << 14,
|
||||
/* Quarter rate channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_QUARTER = 1 << 15,
|
||||
/* HT 20 channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT20 = 1 << 16,
|
||||
/* HT 40 with extension channel above */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40PLUS = 1 << 17,
|
||||
/* HT 40 with extension channel below */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40MINUS = 1 << 18,
|
||||
/* HT 40 intolerant */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOL = 1 << 19,
|
||||
/* VHT 20 channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT20 = 1 << 20,
|
||||
/* VHT 40 with extension channel above */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40PLUS = 1 << 21,
|
||||
/* VHT 40 with extension channel below */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40MINUS = 1 << 22,
|
||||
/* VHT 80 channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80 = 1 << 23,
|
||||
/* HT 40 intolerant mark bit for ACS use */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOLMARK = 1 << 24,
|
||||
/* Channel temporarily blocked due to noise */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_BLOCKED = 1 << 25,
|
||||
/* VHT 160 channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT160 = 1 << 26,
|
||||
/* VHT 80+80 channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80_80 = 1 << 27,
|
||||
};
|
||||
|
||||
/**
|
||||
* qca_wlan_vendor_channel_prop_flags_ext: This represent the extended flags for
|
||||
* each channel. This is used by
|
||||
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT.
|
||||
*/
|
||||
enum qca_wlan_vendor_channel_prop_flags_ext {
|
||||
/* Radar found on channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_RADAR_FOUND = 1 << 0,
|
||||
/* DFS required on channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS = 1 << 1,
|
||||
/* DFS required on channel for 2nd band of 80+80 */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CFREQ2 = 1 << 2,
|
||||
/* If channel has been checked for DFS */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CLEAR = 1 << 3,
|
||||
/* Excluded in 802.11d */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_11D_EXCLUDED = 1 << 4,
|
||||
/* Channel Switch Announcement received on this channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CSA_RECEIVED = 1 << 5,
|
||||
/* Ad-hoc is not allowed */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_ADHOC = 1 << 6,
|
||||
/* Station only channel */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_HOSTAP = 1 << 7,
|
||||
/* DFS radar history for slave device (STA mode) */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_HISTORY_RADAR = 1 << 8,
|
||||
/* DFS CAC valid for slave device (STA mode) */
|
||||
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CAC_VALID = 1 << 9,
|
||||
};
|
||||
|
||||
/**
|
||||
* qca_wlan_vendor_external_acs_event_chan_info_attr: Represents per channel
|
||||
* information. These attributes are sent as part of
|
||||
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO. Each set of the following
|
||||
* attributes correspond to a single channel.
|
||||
*/
|
||||
enum qca_wlan_vendor_external_acs_event_chan_info_attr {
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_INVALID = 0,
|
||||
|
||||
/* A bitmask (u32) with flags specified in
|
||||
* enum qca_wlan_vendor_channel_prop_flags.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS = 1,
|
||||
/* A bitmask (u32) with flags specified in
|
||||
* enum qca_wlan_vendor_channel_prop_flags_ext.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT = 2,
|
||||
/* frequency in MHz (u32) */
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ = 3,
|
||||
/* maximum regulatory transmission power (u32) */
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER = 4,
|
||||
/* maximum transmission power (u32) */
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER = 5,
|
||||
/* minimum transmission power (u32) */
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER = 6,
|
||||
/* regulatory class id (u8) */
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID = 7,
|
||||
/* maximum antenna gain in (u8) */
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN = 8,
|
||||
/* VHT segment 0 (u8) */
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0 = 9,
|
||||
/* VHT segment 1 (u8) */
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1 = 10,
|
||||
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST,
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX =
|
||||
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* qca_wlan_vendor_attr_pcl: Represents attributes for
|
||||
* preferred channel list (PCL). These attributes are sent as part of
|
||||
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_pcl {
|
||||
QCA_WLAN_VENDOR_ATTR_PCL_INVALID = 0,
|
||||
|
||||
/* Channel number (u8) */
|
||||
QCA_WLAN_VENDOR_ATTR_PCL_CHANNEL = 1,
|
||||
/* Channel weightage (u8) */
|
||||
QCA_WLAN_VENDOR_ATTR_PCL_WEIGHT = 2,
|
||||
};
|
||||
|
||||
/**
|
||||
* qca_wlan_vendor_attr_external_acs_event: Attribute to vendor sub-command
|
||||
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This attribute will be sent by
|
||||
* host driver.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_external_acs_event {
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_INVALID = 0,
|
||||
|
||||
/* This reason (u8) refers to enum qca_wlan_vendor_acs_select_reason.
|
||||
* This helps ACS module to understand why ACS needs to be started.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON = 1,
|
||||
/* Flag attribute to indicate if driver supports spectral scanning */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED = 2,
|
||||
/* Flag attribute to indicate if 11ac is offloaded to firmware */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3,
|
||||
/* Flag attribute to indicate if driver provides additional channel
|
||||
* capability as part of scan operation */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4,
|
||||
/* Flag attribute to indicate interface status is UP */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP = 5,
|
||||
/* Operating mode (u8) of interface. Takes one of enum nl80211_iftype
|
||||
* values. */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 6,
|
||||
/* Channel width (u8). It takes one of enum nl80211_chan_width values.
|
||||
* This is the upper bound of channel width. ACS logic should try to get
|
||||
* a channel with the specified width and if not found, look for lower
|
||||
* values.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH = 7,
|
||||
/* This (u8) will hold values of one of enum nl80211_bands */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 8,
|
||||
/* PHY/HW mode (u8). Takes one of enum qca_wlan_vendor_acs_hw_mode
|
||||
* values */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 9,
|
||||
/* Array of (u32) supported frequency list among which ACS should choose
|
||||
* best frequency.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_FREQ_LIST = 10,
|
||||
/* Preferred channel list by the driver which will have array of nested
|
||||
* values as per enum qca_wlan_vendor_attr_pcl attribute.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL = 11,
|
||||
/* Array of nested attribute for each channel. It takes attr as defined
|
||||
* in enum qca_wlan_vendor_external_acs_event_chan_info_attr.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO = 12,
|
||||
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAX =
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* qca_wlan_vendor_attr_external_acs_channels: Attributes to vendor subcmd
|
||||
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This carries a list of channels
|
||||
* in priority order as decided after ACS operation in userspace.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_external_acs_channels {
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0,
|
||||
|
||||
/* One of reason code (u8) from enum qca_wlan_vendor_acs_select_reason
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON = 1,
|
||||
|
||||
/* Array of nested values for each channel with following attributes:
|
||||
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND,
|
||||
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY,
|
||||
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY,
|
||||
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0,
|
||||
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1,
|
||||
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST = 2,
|
||||
/* This (u8) will hold values of one of enum nl80211_bands */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND = 3,
|
||||
/* Primary channel (u8) */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY = 4,
|
||||
/* Secondary channel (u8) used for HT 40 MHz channels */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY = 5,
|
||||
/* VHT seg0 channel (u8) */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 = 6,
|
||||
/* VHT seg1 channel (u8) */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 = 7,
|
||||
/* Channel width (u8). Takes one of enum nl80211_chan_width values. */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH = 8,
|
||||
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_MAX =
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST - 1
|
||||
};
|
||||
|
||||
#endif /* QCA_VENDOR_H */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user