Remove references to madwifi from various files

Number of documentation and configuration files had references to the
madwifi driver interface that was removed in the previous commit. Remove
these references as well.

Signed-off-by: Jouni Malinen <j@w1.fi>

doc/hostapd.fig

@@ -255,7 +255,7 @@ Single
 4 0 0 50 -1 2 14 0.0000 4 195 720 1637 2371 hostapd\001
 4 0 0 50 -1 0 12 0.0000 4 180 600 3825 7125 prism54\001
 4 0 0 50 -1 0 12 0.0000 4 180 510 1875 7125 hostap\001
-4 0 0 50 -1 0 12 0.0000 4 135 600 2850 7125 madwifi\001
+4 0 0 50 -1 0 12 0.0000 4 135 600 2850 7125 nl80211\001
 4 0 0 50 -1 0 12 0.0000 4 135 270 4800 7125 bsd\001
 4 0 0 50 -1 0 12 0.0000 4 105 300 6750 7125 test\001
 4 0 0 50 -1 0 12 0.0000 4 135 420 5775 7125 wired\001

doc/wpa_supplicant.fig

@@ -100,7 +100,7 @@ Single
 2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
 	 4650 6600 4650 6300
 4 0 0 50 -1 0 12 0.0000 4 180 510 2850 7125 hostap\001
-4 0 0 50 -1 0 12 0.0000 4 135 600 3825 7125 madwifi\001
+4 0 0 50 -1 0 12 0.0000 4 135 600 3825 7125 nl80211\001
 -6
 6 3525 7800 5775 8100
 2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5

hostapd/README

@@ -74,12 +74,6 @@ Current hardware/software requirements:
 	Please note that station firmware version needs to be 1.7.0 or newer
 	to work in WPA mode.
 
-	madwifi driver for cards based on Atheros chip set (ar521x)
-	(http://sourceforge.net/projects/madwifi/)
-	Please note that you will need to add the correct path for
-	madwifi driver root directory in .config (see defconfig file for
-	an example: CFLAGS += -I<path>)
-
 	mac80211-based drivers that support AP mode (with driver=nl80211).
 	This includes drivers for Atheros (ath9k) and Broadcom (b43)
 	chipsets.

hostapd/README-WPS

@@ -58,10 +58,9 @@ hostapd configuration
 
 WPS is an optional component that needs to be enabled in hostapd build
 configuration (.config). Here is an example configuration that
-includes WPS support and uses madwifi driver interface:
+includes WPS support and uses nl80211 driver interface:
 
-CONFIG_DRIVER_MADWIFI=y
+CONFIG_DRIVER_NL80211=y
-CFLAGS += -I/usr/src/madwifi-0.9.3
 CONFIG_WPS=y
 CONFIG_WPS_UPNP=y
 
@@ -74,8 +73,8 @@ Following section shows an example runtime configuration
 (hostapd.conf) that enables WPS:
 
 # Configure the driver and network interface
-driver=madwifi
+driver=nl80211
-interface=ath0
+interface=wlan0
 
 # WPA2-Personal configuration for the AP
 ssid=wps-test

hostapd/android.config

@@ -15,10 +15,6 @@
 # Driver interface for wired authenticator
 #CONFIG_DRIVER_WIRED=y
 
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
 # Driver interface for drivers using the nl80211 kernel interface
 #CONFIG_DRIVER_NL80211=y
 # driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
@@ -132,7 +128,7 @@ CONFIG_IPV6=y
 #CONFIG_IEEE80211R=y
 
 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
 #CONFIG_DRIVER_RADIUS_ACL=y
 
 # IEEE 802.11n (High Throughput) support

hostapd/defconfig

@@ -15,10 +15,6 @@ CONFIG_DRIVER_HOSTAP=y
 # Driver interface for wired authenticator
 #CONFIG_DRIVER_WIRED=y
 
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
 # Driver interface for drivers using the nl80211 kernel interface
 CONFIG_DRIVER_NL80211=y
 
@@ -142,7 +138,7 @@ CONFIG_IPV6=y
 #CONFIG_IEEE80211R=y
 
 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
 #CONFIG_DRIVER_RADIUS_ACL=y
 
 # IEEE 802.11n (High Throughput) support

hostapd/hostapd.8

@@ -12,7 +12,7 @@ daemon.
 .B hostapd
 is a user space daemon for access point and authentication servers.
 It implements IEEE 802.11 access point management, IEEE 802.1X/WPA/WPA2/EAP Authenticators and RADIUS authentication server.
-The current version supports Linux (Host AP, madwifi, mac80211-based drivers) and FreeBSD (net80211).
+The current version supports Linux (Host AP, mac80211-based drivers) and FreeBSD (net80211).
 
 .B hostapd
 is designed to be a "daemon" program that runs in the background and acts as the backend component controlling authentication.

hostapd/hostapd.conf

@@ -2,10 +2,10 @@
 # Empty lines and lines starting with # are ignored
 
 # AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
-# management frames); ath0 for madwifi
+# management frames with the Host AP driver); wlan0 with many nl80211 drivers
 interface=wlan0
 
-# In case of madwifi, atheros, and nl80211 driver interfaces, an additional
+# In case of atheros and nl80211 driver interfaces, an additional
 # configuration parameter, bridge, may be used to notify hostapd if the
 # interface is included in a bridge. This parameter is not used with Host AP
 # driver. If the bridge parameter is not set, the drivers will automatically
@@ -18,7 +18,7 @@ interface=wlan0
 # interface is also created.
 #bridge=br0
 
-# Driver interface type (hostap/wired/madwifi/test/none/nl80211/bsd);
+# Driver interface type (hostap/wired/test/none/nl80211/bsd);
 # default: hostap). nl80211 is used with all Linux mac80211 drivers.
 # Use driver=none if building hostapd as a standalone RADIUS server that does
 # not control any wireless/wired driver.
@@ -221,7 +221,7 @@ fragm_threshold=2346
 # Station MAC address -based authentication
 # Please note that this kind of access control requires a driver that uses
 # hostapd to take care of management frame processing and as such, this can be
-# used with driver=hostap or driver=nl80211, but not with driver=madwifi.
+# used with driver=hostap or driver=nl80211, but not with driver=atheros.
 # 0 = accept unless in deny list
 # 1 = deny unless in accept list
 # 2 = use external RADIUS server (accept/deny lists are searched first)

wpa_supplicant/todo.txt

@@ -31,7 +31,6 @@ To do:
   in one page; how to build a PDF file with all the SGML included?
 - EAP-POTP/RSA SecurID profile (RFC 4793)
 - document wpa_gui build and consider adding it to 'make install'
-- test madwifi with pairwise=TKIP group=WEP104
 - consider merging hostapd and wpa_supplicant PMKSA cache implementations
 - consider redesigning pending EAP requests (identity/password/otp from
   ctrl_iface) by moving the retrying of the previous request into EAP