fragattacks/src/ap/ieee802_11_auth.c

695 lines
18 KiB
C
Raw Normal View History

/*
* hostapd / IEEE 802.11 authentication (ACL)
* Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*
* Access control list for IEEE 802.11 authentication can uses statically
* configured ACL from configuration files or an external RADIUS server.
* Results from external RADIUS queries are cached to allow faster
* authentication frame processing.
*/
#include "utils/includes.h"
#include "utils/common.h"
#include "utils/eloop.h"
#include "radius/radius.h"
#include "radius/radius_client.h"
#include "hostapd.h"
#include "ap_config.h"
#include "ap_drv_ops.h"
#include "ieee802_11.h"
#include "ieee802_1x.h"
#include "ieee802_11_auth.h"
#define RADIUS_ACL_TIMEOUT 30
struct hostapd_cached_radius_acl {
struct os_reltime timestamp;
macaddr addr;
int accepted; /* HOSTAPD_ACL_* */
struct hostapd_cached_radius_acl *next;
u32 session_timeout;
u32 acct_interim_interval;
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 08:51:56 -05:00
struct vlan_description vlan_id;
struct hostapd_sta_wpa_psk_short *psk;
char *identity;
char *radius_cui;
};
struct hostapd_acl_query_data {
struct os_reltime timestamp;
u8 radius_id;
macaddr addr;
u8 *auth_msg; /* IEEE 802.11 authentication frame from station */
size_t auth_msg_len;
struct hostapd_acl_query_data *next;
};
#ifndef CONFIG_NO_RADIUS
static void hostapd_acl_cache_free_entry(struct hostapd_cached_radius_acl *e)
{
os_free(e->identity);
os_free(e->radius_cui);
hostapd_free_psk_list(e->psk);
os_free(e);
}
static void hostapd_acl_cache_free(struct hostapd_cached_radius_acl *acl_cache)
{
struct hostapd_cached_radius_acl *prev;
while (acl_cache) {
prev = acl_cache;
acl_cache = acl_cache->next;
hostapd_acl_cache_free_entry(prev);
}
}
static void copy_psk_list(struct hostapd_sta_wpa_psk_short **psk,
struct hostapd_sta_wpa_psk_short *src)
{
if (!psk)
return;
if (src)
src->ref++;
*psk = src;
}
static int hostapd_acl_cache_get(struct hostapd_data *hapd, const u8 *addr,
u32 *session_timeout,
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 08:51:56 -05:00
u32 *acct_interim_interval,
struct vlan_description *vlan_id,
struct hostapd_sta_wpa_psk_short **psk,
char **identity, char **radius_cui)
{
struct hostapd_cached_radius_acl *entry;
struct os_reltime now;
os_get_reltime(&now);
for (entry = hapd->acl_cache; entry; entry = entry->next) {
if (os_memcmp(entry->addr, addr, ETH_ALEN) != 0)
continue;
if (os_reltime_expired(&now, &entry->timestamp,
RADIUS_ACL_TIMEOUT))
return -1; /* entry has expired */
if (entry->accepted == HOSTAPD_ACL_ACCEPT_TIMEOUT)
if (session_timeout)
*session_timeout = entry->session_timeout;
if (acct_interim_interval)
*acct_interim_interval =
entry->acct_interim_interval;
if (vlan_id)
*vlan_id = entry->vlan_id;
copy_psk_list(psk, entry->psk);
if (identity) {
if (entry->identity)
*identity = os_strdup(entry->identity);
else
*identity = NULL;
}
if (radius_cui) {
if (entry->radius_cui)
*radius_cui = os_strdup(entry->radius_cui);
else
*radius_cui = NULL;
}
return entry->accepted;
}
return -1;
}
#endif /* CONFIG_NO_RADIUS */
static void hostapd_acl_query_free(struct hostapd_acl_query_data *query)
{
if (query == NULL)
return;
os_free(query->auth_msg);
os_free(query);
}
#ifndef CONFIG_NO_RADIUS
static int hostapd_radius_acl_query(struct hostapd_data *hapd, const u8 *addr,
struct hostapd_acl_query_data *query)
{
struct radius_msg *msg;
char buf[128];
query->radius_id = radius_client_get_id(hapd->radius);
msg = radius_msg_new(RADIUS_CODE_ACCESS_REQUEST, query->radius_id);
if (msg == NULL)
return -1;
if (radius_msg_make_authenticator(msg) < 0) {
wpa_printf(MSG_INFO, "Could not make Request Authenticator");
goto fail;
}
os_snprintf(buf, sizeof(buf), RADIUS_ADDR_FORMAT, MAC2STR(addr));
if (!radius_msg_add_attr(msg, RADIUS_ATTR_USER_NAME, (u8 *) buf,
os_strlen(buf))) {
wpa_printf(MSG_DEBUG, "Could not add User-Name");
goto fail;
}
if (!radius_msg_add_attr_user_password(
msg, (u8 *) buf, os_strlen(buf),
hapd->conf->radius->auth_server->shared_secret,
hapd->conf->radius->auth_server->shared_secret_len)) {
wpa_printf(MSG_DEBUG, "Could not add User-Password");
goto fail;
}
if (add_common_radius_attr(hapd, hapd->conf->radius_auth_req_attr,
NULL, msg) < 0)
goto fail;
os_snprintf(buf, sizeof(buf), RADIUS_802_1X_ADDR_FORMAT,
MAC2STR(addr));
if (!radius_msg_add_attr(msg, RADIUS_ATTR_CALLING_STATION_ID,
(u8 *) buf, os_strlen(buf))) {
wpa_printf(MSG_DEBUG, "Could not add Calling-Station-Id");
goto fail;
}
os_snprintf(buf, sizeof(buf), "CONNECT 11Mbps 802.11b");
if (!radius_msg_add_attr(msg, RADIUS_ATTR_CONNECT_INFO,
(u8 *) buf, os_strlen(buf))) {
wpa_printf(MSG_DEBUG, "Could not add Connect-Info");
goto fail;
}
if (radius_client_send(hapd->radius, msg, RADIUS_AUTH, addr) < 0)
goto fail;
return 0;
fail:
radius_msg_free(msg);
return -1;
}
#endif /* CONFIG_NO_RADIUS */
/**
* hostapd_check_acl - Check a specified STA against accept/deny ACLs
* @hapd: hostapd BSS data
* @addr: MAC address of the STA
* @vlan_id: Buffer for returning VLAN ID
* Returns: HOSTAPD_ACL_ACCEPT, HOSTAPD_ACL_REJECT, or HOSTAPD_ACL_PENDING
*/
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 08:51:56 -05:00
int hostapd_check_acl(struct hostapd_data *hapd, const u8 *addr,
struct vlan_description *vlan_id)
{
if (hostapd_maclist_found(hapd->conf->accept_mac,
hapd->conf->num_accept_mac, addr, vlan_id))
return HOSTAPD_ACL_ACCEPT;
if (hostapd_maclist_found(hapd->conf->deny_mac,
hapd->conf->num_deny_mac, addr, vlan_id))
return HOSTAPD_ACL_REJECT;
if (hapd->conf->macaddr_acl == ACCEPT_UNLESS_DENIED)
return HOSTAPD_ACL_ACCEPT;
if (hapd->conf->macaddr_acl == DENY_UNLESS_ACCEPTED)
return HOSTAPD_ACL_REJECT;
return HOSTAPD_ACL_PENDING;
}
/**
* hostapd_allowed_address - Check whether a specified STA can be authenticated
* @hapd: hostapd BSS data
* @addr: MAC address of the STA
* @msg: Authentication message
* @len: Length of msg in octets
* @session_timeout: Buffer for returning session timeout (from RADIUS)
* @acct_interim_interval: Buffer for returning account interval (from RADIUS)
* @vlan_id: Buffer for returning VLAN ID
* @psk: Linked list buffer for returning WPA PSK
* @identity: Buffer for returning identity (from RADIUS)
* @radius_cui: Buffer for returning CUI (from RADIUS)
* Returns: HOSTAPD_ACL_ACCEPT, HOSTAPD_ACL_REJECT, or HOSTAPD_ACL_PENDING
*
* The caller is responsible for freeing the returned *identity and *radius_cui
* values with os_free().
*/
int hostapd_allowed_address(struct hostapd_data *hapd, const u8 *addr,
const u8 *msg, size_t len, u32 *session_timeout,
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 08:51:56 -05:00
u32 *acct_interim_interval,
struct vlan_description *vlan_id,
struct hostapd_sta_wpa_psk_short **psk,
char **identity, char **radius_cui)
{
int res;
if (session_timeout)
*session_timeout = 0;
if (acct_interim_interval)
*acct_interim_interval = 0;
if (vlan_id)
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 08:51:56 -05:00
os_memset(vlan_id, 0, sizeof(*vlan_id));
if (psk)
*psk = NULL;
if (identity)
*identity = NULL;
if (radius_cui)
*radius_cui = NULL;
res = hostapd_check_acl(hapd, addr, vlan_id);
if (res != HOSTAPD_ACL_PENDING)
return res;
if (hapd->conf->macaddr_acl == USE_EXTERNAL_RADIUS_AUTH) {
#ifdef CONFIG_NO_RADIUS
return HOSTAPD_ACL_REJECT;
#else /* CONFIG_NO_RADIUS */
struct hostapd_acl_query_data *query;
/* Check whether ACL cache has an entry for this station */
res = hostapd_acl_cache_get(hapd, addr, session_timeout,
acct_interim_interval, vlan_id, psk,
identity, radius_cui);
if (res == HOSTAPD_ACL_ACCEPT ||
res == HOSTAPD_ACL_ACCEPT_TIMEOUT)
return res;
if (res == HOSTAPD_ACL_REJECT)
return HOSTAPD_ACL_REJECT;
query = hapd->acl_queries;
while (query) {
if (os_memcmp(query->addr, addr, ETH_ALEN) == 0) {
/* pending query in RADIUS retransmit queue;
* do not generate a new one */
if (identity) {
os_free(*identity);
*identity = NULL;
}
if (radius_cui) {
os_free(*radius_cui);
*radius_cui = NULL;
}
return HOSTAPD_ACL_PENDING;
}
query = query->next;
}
if (!hapd->conf->radius->auth_server)
return HOSTAPD_ACL_REJECT;
/* No entry in the cache - query external RADIUS server */
query = os_zalloc(sizeof(*query));
if (query == NULL) {
wpa_printf(MSG_ERROR, "malloc for query data failed");
return HOSTAPD_ACL_REJECT;
}
os_get_reltime(&query->timestamp);
os_memcpy(query->addr, addr, ETH_ALEN);
if (hostapd_radius_acl_query(hapd, addr, query)) {
wpa_printf(MSG_DEBUG, "Failed to send Access-Request "
"for ACL query.");
hostapd_acl_query_free(query);
return HOSTAPD_ACL_REJECT;
}
query->auth_msg = os_malloc(len);
if (query->auth_msg == NULL) {
wpa_printf(MSG_ERROR, "Failed to allocate memory for "
"auth frame.");
hostapd_acl_query_free(query);
return HOSTAPD_ACL_REJECT;
}
os_memcpy(query->auth_msg, msg, len);
query->auth_msg_len = len;
query->next = hapd->acl_queries;
hapd->acl_queries = query;
/* Queued data will be processed in hostapd_acl_recv_radius()
* when RADIUS server replies to the sent Access-Request. */
return HOSTAPD_ACL_PENDING;
#endif /* CONFIG_NO_RADIUS */
}
return HOSTAPD_ACL_REJECT;
}
#ifndef CONFIG_NO_RADIUS
static void hostapd_acl_expire_cache(struct hostapd_data *hapd,
struct os_reltime *now)
{
struct hostapd_cached_radius_acl *prev, *entry, *tmp;
prev = NULL;
entry = hapd->acl_cache;
while (entry) {
if (os_reltime_expired(now, &entry->timestamp,
RADIUS_ACL_TIMEOUT)) {
wpa_printf(MSG_DEBUG, "Cached ACL entry for " MACSTR
" has expired.", MAC2STR(entry->addr));
if (prev)
prev->next = entry->next;
else
hapd->acl_cache = entry->next;
hostapd_drv_set_radius_acl_expire(hapd, entry->addr);
tmp = entry;
entry = entry->next;
hostapd_acl_cache_free_entry(tmp);
continue;
}
prev = entry;
entry = entry->next;
}
}
static void hostapd_acl_expire_queries(struct hostapd_data *hapd,
struct os_reltime *now)
{
struct hostapd_acl_query_data *prev, *entry, *tmp;
prev = NULL;
entry = hapd->acl_queries;
while (entry) {
if (os_reltime_expired(now, &entry->timestamp,
RADIUS_ACL_TIMEOUT)) {
wpa_printf(MSG_DEBUG, "ACL query for " MACSTR
" has expired.", MAC2STR(entry->addr));
if (prev)
prev->next = entry->next;
else
hapd->acl_queries = entry->next;
tmp = entry;
entry = entry->next;
hostapd_acl_query_free(tmp);
continue;
}
prev = entry;
entry = entry->next;
}
}
/**
* hostapd_acl_expire - ACL cache expiration callback
* @hapd: struct hostapd_data *
*/
void hostapd_acl_expire(struct hostapd_data *hapd)
{
struct os_reltime now;
os_get_reltime(&now);
hostapd_acl_expire_cache(hapd, &now);
hostapd_acl_expire_queries(hapd, &now);
}
static void decode_tunnel_passwords(struct hostapd_data *hapd,
const u8 *shared_secret,
size_t shared_secret_len,
struct radius_msg *msg,
struct radius_msg *req,
struct hostapd_cached_radius_acl *cache)
{
int passphraselen;
char *passphrase;
size_t i;
struct hostapd_sta_wpa_psk_short *psk;
/*
* Decode all tunnel passwords as PSK and save them into a linked list.
*/
for (i = 0; ; i++) {
passphrase = radius_msg_get_tunnel_password(
msg, &passphraselen, shared_secret, shared_secret_len,
req, i);
/*
* Passphrase is NULL iff there is no i-th Tunnel-Password
* attribute in msg.
*/
if (passphrase == NULL)
break;
/*
* Passphase should be 8..63 chars (to be hashed with SSID)
* or 64 chars hex string (no separate hashing with SSID).
*/
if (passphraselen < MIN_PASSPHRASE_LEN ||
passphraselen > MAX_PASSPHRASE_LEN + 1)
goto free_pass;
/*
* passphrase does not contain the NULL termination.
* Add it here as pbkdf2_sha1() requires it.
*/
psk = os_zalloc(sizeof(struct hostapd_sta_wpa_psk_short));
if (psk) {
if ((passphraselen == MAX_PASSPHRASE_LEN + 1) &&
(hexstr2bin(passphrase, psk->psk, PMK_LEN) < 0)) {
hostapd_logger(hapd, cache->addr,
HOSTAPD_MODULE_RADIUS,
HOSTAPD_LEVEL_WARNING,
"invalid hex string (%d chars) in Tunnel-Password",
passphraselen);
goto skip;
} else if (passphraselen <= MAX_PASSPHRASE_LEN) {
os_memcpy(psk->passphrase, passphrase,
passphraselen);
psk->is_passphrase = 1;
}
psk->next = cache->psk;
cache->psk = psk;
psk = NULL;
}
skip:
os_free(psk);
free_pass:
os_free(passphrase);
}
}
/**
* hostapd_acl_recv_radius - Process incoming RADIUS Authentication messages
* @msg: RADIUS response message
* @req: RADIUS request message
* @shared_secret: RADIUS shared secret
* @shared_secret_len: Length of shared_secret in octets
* @data: Context data (struct hostapd_data *)
* Returns: RADIUS_RX_PROCESSED if RADIUS message was a reply to ACL query (and
* was processed here) or RADIUS_RX_UNKNOWN if not.
*/
static RadiusRxResult
hostapd_acl_recv_radius(struct radius_msg *msg, struct radius_msg *req,
const u8 *shared_secret, size_t shared_secret_len,
void *data)
{
struct hostapd_data *hapd = data;
struct hostapd_acl_query_data *query, *prev;
struct hostapd_cached_radius_acl *cache;
struct radius_hdr *hdr = radius_msg_get_hdr(msg);
int *untagged, *tagged, *notempty;
query = hapd->acl_queries;
prev = NULL;
while (query) {
if (query->radius_id == hdr->identifier)
break;
prev = query;
query = query->next;
}
if (query == NULL)
return RADIUS_RX_UNKNOWN;
wpa_printf(MSG_DEBUG, "Found matching Access-Request for RADIUS "
"message (id=%d)", query->radius_id);
if (radius_msg_verify(msg, shared_secret, shared_secret_len, req, 0)) {
wpa_printf(MSG_INFO, "Incoming RADIUS packet did not have "
"correct authenticator - dropped\n");
return RADIUS_RX_INVALID_AUTHENTICATOR;
}
if (hdr->code != RADIUS_CODE_ACCESS_ACCEPT &&
hdr->code != RADIUS_CODE_ACCESS_REJECT) {
wpa_printf(MSG_DEBUG, "Unknown RADIUS message code %d to ACL "
"query", hdr->code);
return RADIUS_RX_UNKNOWN;
}
/* Insert Accept/Reject info into ACL cache */
cache = os_zalloc(sizeof(*cache));
if (cache == NULL) {
wpa_printf(MSG_DEBUG, "Failed to add ACL cache entry");
goto done;
}
os_get_reltime(&cache->timestamp);
os_memcpy(cache->addr, query->addr, sizeof(cache->addr));
if (hdr->code == RADIUS_CODE_ACCESS_ACCEPT) {
u8 *buf;
size_t len;
if (radius_msg_get_attr_int32(msg, RADIUS_ATTR_SESSION_TIMEOUT,
&cache->session_timeout) == 0)
cache->accepted = HOSTAPD_ACL_ACCEPT_TIMEOUT;
else
cache->accepted = HOSTAPD_ACL_ACCEPT;
if (radius_msg_get_attr_int32(
msg, RADIUS_ATTR_ACCT_INTERIM_INTERVAL,
&cache->acct_interim_interval) == 0 &&
cache->acct_interim_interval < 60) {
wpa_printf(MSG_DEBUG, "Ignored too small "
"Acct-Interim-Interval %d for STA " MACSTR,
cache->acct_interim_interval,
MAC2STR(query->addr));
cache->acct_interim_interval = 0;
}
notempty = &cache->vlan_id.notempty;
untagged = &cache->vlan_id.untagged;
tagged = cache->vlan_id.tagged;
*notempty = !!radius_msg_get_vlanid(msg, untagged,
MAX_NUM_TAGGED_VLAN,
tagged);
decode_tunnel_passwords(hapd, shared_secret, shared_secret_len,
msg, req, cache);
if (radius_msg_get_attr_ptr(msg, RADIUS_ATTR_USER_NAME,
&buf, &len, NULL) == 0) {
cache->identity = os_zalloc(len + 1);
if (cache->identity)
os_memcpy(cache->identity, buf, len);
}
if (radius_msg_get_attr_ptr(
msg, RADIUS_ATTR_CHARGEABLE_USER_IDENTITY,
&buf, &len, NULL) == 0) {
cache->radius_cui = os_zalloc(len + 1);
if (cache->radius_cui)
os_memcpy(cache->radius_cui, buf, len);
}
if (hapd->conf->wpa_psk_radius == PSK_RADIUS_REQUIRED &&
!cache->psk)
cache->accepted = HOSTAPD_ACL_REJECT;
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 08:51:56 -05:00
if (cache->vlan_id.notempty &&
!hostapd_vlan_valid(hapd->conf->vlan, &cache->vlan_id)) {
hostapd_logger(hapd, query->addr,
HOSTAPD_MODULE_RADIUS,
HOSTAPD_LEVEL_INFO,
"Invalid VLAN %d%s received from RADIUS server",
cache->vlan_id.untagged,
cache->vlan_id.tagged[0] ? "+" : "");
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 08:51:56 -05:00
os_memset(&cache->vlan_id, 0, sizeof(cache->vlan_id));
}
if (hapd->conf->ssid.dynamic_vlan == DYNAMIC_VLAN_REQUIRED &&
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 08:51:56 -05:00
!cache->vlan_id.notempty)
cache->accepted = HOSTAPD_ACL_REJECT;
} else
cache->accepted = HOSTAPD_ACL_REJECT;
cache->next = hapd->acl_cache;
hapd->acl_cache = cache;
#ifdef CONFIG_DRIVER_RADIUS_ACL
hostapd_drv_set_radius_acl_auth(hapd, query->addr, cache->accepted,
cache->session_timeout);
#else /* CONFIG_DRIVER_RADIUS_ACL */
#ifdef NEED_AP_MLME
/* Re-send original authentication frame for 802.11 processing */
wpa_printf(MSG_DEBUG, "Re-sending authentication frame after "
"successful RADIUS ACL query");
ieee802_11_mgmt(hapd, query->auth_msg, query->auth_msg_len, NULL);
#endif /* NEED_AP_MLME */
#endif /* CONFIG_DRIVER_RADIUS_ACL */
done:
if (prev == NULL)
hapd->acl_queries = query->next;
else
prev->next = query->next;
hostapd_acl_query_free(query);
return RADIUS_RX_PROCESSED;
}
#endif /* CONFIG_NO_RADIUS */
/**
* hostapd_acl_init: Initialize IEEE 802.11 ACL
* @hapd: hostapd BSS data
* Returns: 0 on success, -1 on failure
*/
int hostapd_acl_init(struct hostapd_data *hapd)
{
#ifndef CONFIG_NO_RADIUS
if (radius_client_register(hapd->radius, RADIUS_AUTH,
hostapd_acl_recv_radius, hapd))
return -1;
#endif /* CONFIG_NO_RADIUS */
return 0;
}
/**
* hostapd_acl_deinit - Deinitialize IEEE 802.11 ACL
* @hapd: hostapd BSS data
*/
void hostapd_acl_deinit(struct hostapd_data *hapd)
{
struct hostapd_acl_query_data *query, *prev;
#ifndef CONFIG_NO_RADIUS
hostapd_acl_cache_free(hapd->acl_cache);
hapd->acl_cache = NULL;
#endif /* CONFIG_NO_RADIUS */
query = hapd->acl_queries;
hapd->acl_queries = NULL;
while (query) {
prev = query;
query = query->next;
hostapd_acl_query_free(prev);
}
}
void hostapd_free_psk_list(struct hostapd_sta_wpa_psk_short *psk)
{
if (psk && psk->ref) {
/* This will be freed when the last reference is dropped. */
psk->ref--;
return;
}
while (psk) {
struct hostapd_sta_wpa_psk_short *prev = psk;
psk = psk->next;
os_free(prev);
}
}