fragattacks/src/crypto/tls_openssl.c

3728 lines
92 KiB
C
Raw Normal View History

/*
* SSL/TLS interface functions for OpenSSL
* Copyright (c) 2004-2013, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "includes.h"
#ifndef CONFIG_SMARTCARD
#ifndef OPENSSL_NO_ENGINE
#ifndef ANDROID
#define OPENSSL_NO_ENGINE
#endif
#endif
#endif
#include <openssl/ssl.h>
#include <openssl/err.h>
#include <openssl/pkcs12.h>
#include <openssl/x509v3.h>
#ifndef OPENSSL_NO_ENGINE
#include <openssl/engine.h>
#endif /* OPENSSL_NO_ENGINE */
#include "common.h"
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
#include "crypto.h"
#include "sha1.h"
#include "tls.h"
#if defined(SSL_CTX_get_app_data) && defined(SSL_CTX_set_app_data)
#define OPENSSL_SUPPORTS_CTX_APP_DATA
#endif
#if OPENSSL_VERSION_NUMBER < 0x10000000L
/* ERR_remove_thread_state replaces ERR_remove_state and the latter is
* deprecated. However, OpenSSL 0.9.8 doesn't include
* ERR_remove_thread_state. */
#define ERR_remove_thread_state(tid) ERR_remove_state(0)
#endif
#if defined(OPENSSL_IS_BORINGSSL)
/* stack_index_t is the return type of OpenSSL's sk_XXX_num() functions. */
typedef size_t stack_index_t;
#else
typedef int stack_index_t;
#endif
#ifdef SSL_set_tlsext_status_type
#ifndef OPENSSL_NO_TLSEXT
#define HAVE_OCSP
#include <openssl/ocsp.h>
#endif /* OPENSSL_NO_TLSEXT */
#endif /* SSL_set_tlsext_status_type */
#ifdef ANDROID
#include <openssl/pem.h>
#include <keystore/keystore_get.h>
static BIO * BIO_from_keystore(const char *key)
{
BIO *bio = NULL;
uint8_t *value = NULL;
int length = keystore_get(key, strlen(key), &value);
if (length != -1 && (bio = BIO_new(BIO_s_mem())) != NULL)
BIO_write(bio, value, length);
free(value);
return bio;
}
#endif /* ANDROID */
static int tls_openssl_ref_count = 0;
struct tls_context {
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
void (*event_cb)(void *ctx, enum tls_event ev,
union tls_event_data *data);
void *cb_ctx;
int cert_in_cb;
char *ocsp_stapling_response;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
};
static struct tls_context *tls_global = NULL;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
struct tls_connection {
struct tls_context *context;
SSL_CTX *ssl_ctx;
SSL *ssl;
BIO *ssl_in, *ssl_out;
#ifndef OPENSSL_NO_ENGINE
ENGINE *engine; /* functional reference to the engine */
EVP_PKEY *private_key; /* the private key if using engine */
#endif /* OPENSSL_NO_ENGINE */
char *subject_match, *altsubject_match, *suffix_match, *domain_match;
int read_alerts, write_alerts, failed;
tls_session_ticket_cb session_ticket_cb;
void *session_ticket_cb_ctx;
/* SessionTicket received from OpenSSL hello_extension_cb (server) */
u8 *session_ticket;
size_t session_ticket_len;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
2010-04-11 05:27:13 -04:00
unsigned int ca_cert_verify:1;
unsigned int cert_probe:1;
unsigned int server_cert_only:1;
unsigned int invalid_hb_used:1;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
u8 srv_cert_hash[32];
unsigned int flags;
X509 *peer_cert;
X509 *peer_issuer;
X509 *peer_issuer_issuer;
};
static struct tls_context * tls_context_new(const struct tls_config *conf)
{
struct tls_context *context = os_zalloc(sizeof(*context));
if (context == NULL)
return NULL;
if (conf) {
context->event_cb = conf->event_cb;
context->cb_ctx = conf->cb_ctx;
context->cert_in_cb = conf->cert_in_cb;
}
return context;
}
#ifdef CONFIG_NO_STDOUT_DEBUG
static void _tls_show_errors(void)
{
unsigned long err;
while ((err = ERR_get_error())) {
/* Just ignore the errors, since stdout is disabled */
}
}
#define tls_show_errors(l, f, t) _tls_show_errors()
#else /* CONFIG_NO_STDOUT_DEBUG */
static void tls_show_errors(int level, const char *func, const char *txt)
{
unsigned long err;
wpa_printf(level, "OpenSSL: %s - %s %s",
func, txt, ERR_error_string(ERR_get_error(), NULL));
while ((err = ERR_get_error())) {
wpa_printf(MSG_INFO, "OpenSSL: pending error: %s",
ERR_error_string(err, NULL));
}
}
#endif /* CONFIG_NO_STDOUT_DEBUG */
#ifdef CONFIG_NATIVE_WINDOWS
/* Windows CryptoAPI and access to certificate stores */
#include <wincrypt.h>
#ifdef __MINGW32_VERSION
/*
* MinGW does not yet include all the needed definitions for CryptoAPI, so
* define here whatever extra is needed.
*/
#define CERT_SYSTEM_STORE_CURRENT_USER (1 << 16)
#define CERT_STORE_READONLY_FLAG 0x00008000
#define CERT_STORE_OPEN_EXISTING_FLAG 0x00004000
#endif /* __MINGW32_VERSION */
struct cryptoapi_rsa_data {
const CERT_CONTEXT *cert;
HCRYPTPROV crypt_prov;
DWORD key_spec;
BOOL free_crypt_prov;
};
static void cryptoapi_error(const char *msg)
{
wpa_printf(MSG_INFO, "CryptoAPI: %s; err=%u",
msg, (unsigned int) GetLastError());
}
static int cryptoapi_rsa_pub_enc(int flen, const unsigned char *from,
unsigned char *to, RSA *rsa, int padding)
{
wpa_printf(MSG_DEBUG, "%s - not implemented", __func__);
return 0;
}
static int cryptoapi_rsa_pub_dec(int flen, const unsigned char *from,
unsigned char *to, RSA *rsa, int padding)
{
wpa_printf(MSG_DEBUG, "%s - not implemented", __func__);
return 0;
}
static int cryptoapi_rsa_priv_enc(int flen, const unsigned char *from,
unsigned char *to, RSA *rsa, int padding)
{
struct cryptoapi_rsa_data *priv =
(struct cryptoapi_rsa_data *) rsa->meth->app_data;
HCRYPTHASH hash;
DWORD hash_size, len, i;
unsigned char *buf = NULL;
int ret = 0;
if (priv == NULL) {
RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT,
ERR_R_PASSED_NULL_PARAMETER);
return 0;
}
if (padding != RSA_PKCS1_PADDING) {
RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT,
RSA_R_UNKNOWN_PADDING_TYPE);
return 0;
}
if (flen != 16 /* MD5 */ + 20 /* SHA-1 */) {
wpa_printf(MSG_INFO, "%s - only MD5-SHA1 hash supported",
__func__);
RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT,
RSA_R_INVALID_MESSAGE_LENGTH);
return 0;
}
if (!CryptCreateHash(priv->crypt_prov, CALG_SSL3_SHAMD5, 0, 0, &hash))
{
cryptoapi_error("CryptCreateHash failed");
return 0;
}
len = sizeof(hash_size);
if (!CryptGetHashParam(hash, HP_HASHSIZE, (BYTE *) &hash_size, &len,
0)) {
cryptoapi_error("CryptGetHashParam failed");
goto err;
}
if ((int) hash_size != flen) {
wpa_printf(MSG_INFO, "CryptoAPI: Invalid hash size (%u != %d)",
(unsigned) hash_size, flen);
RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT,
RSA_R_INVALID_MESSAGE_LENGTH);
goto err;
}
if (!CryptSetHashParam(hash, HP_HASHVAL, (BYTE * ) from, 0)) {
cryptoapi_error("CryptSetHashParam failed");
goto err;
}
len = RSA_size(rsa);
buf = os_malloc(len);
if (buf == NULL) {
RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT, ERR_R_MALLOC_FAILURE);
goto err;
}
if (!CryptSignHash(hash, priv->key_spec, NULL, 0, buf, &len)) {
cryptoapi_error("CryptSignHash failed");
goto err;
}
for (i = 0; i < len; i++)
to[i] = buf[len - i - 1];
ret = len;
err:
os_free(buf);
CryptDestroyHash(hash);
return ret;
}
static int cryptoapi_rsa_priv_dec(int flen, const unsigned char *from,
unsigned char *to, RSA *rsa, int padding)
{
wpa_printf(MSG_DEBUG, "%s - not implemented", __func__);
return 0;
}
static void cryptoapi_free_data(struct cryptoapi_rsa_data *priv)
{
if (priv == NULL)
return;
if (priv->crypt_prov && priv->free_crypt_prov)
CryptReleaseContext(priv->crypt_prov, 0);
if (priv->cert)
CertFreeCertificateContext(priv->cert);
os_free(priv);
}
static int cryptoapi_finish(RSA *rsa)
{
cryptoapi_free_data((struct cryptoapi_rsa_data *) rsa->meth->app_data);
os_free((void *) rsa->meth);
rsa->meth = NULL;
return 1;
}
static const CERT_CONTEXT * cryptoapi_find_cert(const char *name, DWORD store)
{
HCERTSTORE cs;
const CERT_CONTEXT *ret = NULL;
cs = CertOpenStore((LPCSTR) CERT_STORE_PROV_SYSTEM, 0, 0,
store | CERT_STORE_OPEN_EXISTING_FLAG |
CERT_STORE_READONLY_FLAG, L"MY");
if (cs == NULL) {
cryptoapi_error("Failed to open 'My system store'");
return NULL;
}
if (strncmp(name, "cert://", 7) == 0) {
unsigned short wbuf[255];
MultiByteToWideChar(CP_ACP, 0, name + 7, -1, wbuf, 255);
ret = CertFindCertificateInStore(cs, X509_ASN_ENCODING |
PKCS_7_ASN_ENCODING,
0, CERT_FIND_SUBJECT_STR,
wbuf, NULL);
} else if (strncmp(name, "hash://", 7) == 0) {
CRYPT_HASH_BLOB blob;
int len;
const char *hash = name + 7;
unsigned char *buf;
len = os_strlen(hash) / 2;
buf = os_malloc(len);
if (buf && hexstr2bin(hash, buf, len) == 0) {
blob.cbData = len;
blob.pbData = buf;
ret = CertFindCertificateInStore(cs,
X509_ASN_ENCODING |
PKCS_7_ASN_ENCODING,
0, CERT_FIND_HASH,
&blob, NULL);
}
os_free(buf);
}
CertCloseStore(cs, 0);
return ret;
}
static int tls_cryptoapi_cert(SSL *ssl, const char *name)
{
X509 *cert = NULL;
RSA *rsa = NULL, *pub_rsa;
struct cryptoapi_rsa_data *priv;
RSA_METHOD *rsa_meth;
if (name == NULL ||
(strncmp(name, "cert://", 7) != 0 &&
strncmp(name, "hash://", 7) != 0))
return -1;
priv = os_zalloc(sizeof(*priv));
rsa_meth = os_zalloc(sizeof(*rsa_meth));
if (priv == NULL || rsa_meth == NULL) {
wpa_printf(MSG_WARNING, "CryptoAPI: Failed to allocate memory "
"for CryptoAPI RSA method");
os_free(priv);
os_free(rsa_meth);
return -1;
}
priv->cert = cryptoapi_find_cert(name, CERT_SYSTEM_STORE_CURRENT_USER);
if (priv->cert == NULL) {
priv->cert = cryptoapi_find_cert(
name, CERT_SYSTEM_STORE_LOCAL_MACHINE);
}
if (priv->cert == NULL) {
wpa_printf(MSG_INFO, "CryptoAPI: Could not find certificate "
"'%s'", name);
goto err;
}
cert = d2i_X509(NULL,
(const unsigned char **) &priv->cert->pbCertEncoded,
priv->cert->cbCertEncoded);
if (cert == NULL) {
wpa_printf(MSG_INFO, "CryptoAPI: Could not process X509 DER "
"encoding");
goto err;
}
if (!CryptAcquireCertificatePrivateKey(priv->cert,
CRYPT_ACQUIRE_COMPARE_KEY_FLAG,
NULL, &priv->crypt_prov,
&priv->key_spec,
&priv->free_crypt_prov)) {
cryptoapi_error("Failed to acquire a private key for the "
"certificate");
goto err;
}
rsa_meth->name = "Microsoft CryptoAPI RSA Method";
rsa_meth->rsa_pub_enc = cryptoapi_rsa_pub_enc;
rsa_meth->rsa_pub_dec = cryptoapi_rsa_pub_dec;
rsa_meth->rsa_priv_enc = cryptoapi_rsa_priv_enc;
rsa_meth->rsa_priv_dec = cryptoapi_rsa_priv_dec;
rsa_meth->finish = cryptoapi_finish;
rsa_meth->flags = RSA_METHOD_FLAG_NO_CHECK;
rsa_meth->app_data = (char *) priv;
rsa = RSA_new();
if (rsa == NULL) {
SSLerr(SSL_F_SSL_CTX_USE_CERTIFICATE_FILE,
ERR_R_MALLOC_FAILURE);
goto err;
}
if (!SSL_use_certificate(ssl, cert)) {
RSA_free(rsa);
rsa = NULL;
goto err;
}
pub_rsa = cert->cert_info->key->pkey->pkey.rsa;
X509_free(cert);
cert = NULL;
rsa->n = BN_dup(pub_rsa->n);
rsa->e = BN_dup(pub_rsa->e);
if (!RSA_set_method(rsa, rsa_meth))
goto err;
if (!SSL_use_RSAPrivateKey(ssl, rsa))
goto err;
RSA_free(rsa);
return 0;
err:
if (cert)
X509_free(cert);
if (rsa)
RSA_free(rsa);
else {
os_free(rsa_meth);
cryptoapi_free_data(priv);
}
return -1;
}
static int tls_cryptoapi_ca_cert(SSL_CTX *ssl_ctx, SSL *ssl, const char *name)
{
HCERTSTORE cs;
PCCERT_CONTEXT ctx = NULL;
X509 *cert;
char buf[128];
const char *store;
#ifdef UNICODE
WCHAR *wstore;
#endif /* UNICODE */
if (name == NULL || strncmp(name, "cert_store://", 13) != 0)
return -1;
store = name + 13;
#ifdef UNICODE
wstore = os_malloc((os_strlen(store) + 1) * sizeof(WCHAR));
if (wstore == NULL)
return -1;
wsprintf(wstore, L"%S", store);
cs = CertOpenSystemStore(0, wstore);
os_free(wstore);
#else /* UNICODE */
cs = CertOpenSystemStore(0, store);
#endif /* UNICODE */
if (cs == NULL) {
wpa_printf(MSG_DEBUG, "%s: failed to open system cert store "
"'%s': error=%d", __func__, store,
(int) GetLastError());
return -1;
}
while ((ctx = CertEnumCertificatesInStore(cs, ctx))) {
cert = d2i_X509(NULL,
(const unsigned char **) &ctx->pbCertEncoded,
ctx->cbCertEncoded);
if (cert == NULL) {
wpa_printf(MSG_INFO, "CryptoAPI: Could not process "
"X509 DER encoding for CA cert");
continue;
}
X509_NAME_oneline(X509_get_subject_name(cert), buf,
sizeof(buf));
wpa_printf(MSG_DEBUG, "OpenSSL: Loaded CA certificate for "
"system certificate store: subject='%s'", buf);
if (!X509_STORE_add_cert(ssl_ctx->cert_store, cert)) {
tls_show_errors(MSG_WARNING, __func__,
"Failed to add ca_cert to OpenSSL "
"certificate store");
}
X509_free(cert);
}
if (!CertCloseStore(cs, 0)) {
wpa_printf(MSG_DEBUG, "%s: failed to close system cert store "
"'%s': error=%d", __func__, name + 13,
(int) GetLastError());
}
return 0;
}
#else /* CONFIG_NATIVE_WINDOWS */
static int tls_cryptoapi_cert(SSL *ssl, const char *name)
{
return -1;
}
#endif /* CONFIG_NATIVE_WINDOWS */
static void ssl_info_cb(const SSL *ssl, int where, int ret)
{
const char *str;
int w;
wpa_printf(MSG_DEBUG, "SSL: (where=0x%x ret=0x%x)", where, ret);
w = where & ~SSL_ST_MASK;
if (w & SSL_ST_CONNECT)
str = "SSL_connect";
else if (w & SSL_ST_ACCEPT)
str = "SSL_accept";
else
str = "undefined";
if (where & SSL_CB_LOOP) {
wpa_printf(MSG_DEBUG, "SSL: %s:%s",
str, SSL_state_string_long(ssl));
} else if (where & SSL_CB_ALERT) {
struct tls_connection *conn = SSL_get_app_data((SSL *) ssl);
wpa_printf(MSG_INFO, "SSL: SSL3 alert: %s:%s:%s",
where & SSL_CB_READ ?
"read (remote end reported an error)" :
"write (local SSL3 detected an error)",
SSL_alert_type_string_long(ret),
SSL_alert_desc_string_long(ret));
if ((ret >> 8) == SSL3_AL_FATAL) {
if (where & SSL_CB_READ)
conn->read_alerts++;
else
conn->write_alerts++;
}
if (conn->context->event_cb != NULL) {
union tls_event_data ev;
struct tls_context *context = conn->context;
os_memset(&ev, 0, sizeof(ev));
ev.alert.is_local = !(where & SSL_CB_READ);
ev.alert.type = SSL_alert_type_string_long(ret);
ev.alert.description = SSL_alert_desc_string_long(ret);
context->event_cb(context->cb_ctx, TLS_ALERT, &ev);
}
} else if (where & SSL_CB_EXIT && ret <= 0) {
wpa_printf(MSG_DEBUG, "SSL: %s:%s in %s",
str, ret == 0 ? "failed" : "error",
SSL_state_string_long(ssl));
}
}
#ifndef OPENSSL_NO_ENGINE
/**
* tls_engine_load_dynamic_generic - load any openssl engine
* @pre: an array of commands and values that load an engine initialized
* in the engine specific function
* @post: an array of commands and values that initialize an already loaded
* engine (or %NULL if not required)
* @id: the engine id of the engine to load (only required if post is not %NULL
*
* This function is a generic function that loads any openssl engine.
*
* Returns: 0 on success, -1 on failure
*/
static int tls_engine_load_dynamic_generic(const char *pre[],
const char *post[], const char *id)
{
ENGINE *engine;
const char *dynamic_id = "dynamic";
engine = ENGINE_by_id(id);
if (engine) {
ENGINE_free(engine);
wpa_printf(MSG_DEBUG, "ENGINE: engine '%s' is already "
"available", id);
return 0;
}
ERR_clear_error();
engine = ENGINE_by_id(dynamic_id);
if (engine == NULL) {
wpa_printf(MSG_INFO, "ENGINE: Can't find engine %s [%s]",
dynamic_id,
ERR_error_string(ERR_get_error(), NULL));
return -1;
}
/* Perform the pre commands. This will load the engine. */
while (pre && pre[0]) {
wpa_printf(MSG_DEBUG, "ENGINE: '%s' '%s'", pre[0], pre[1]);
if (ENGINE_ctrl_cmd_string(engine, pre[0], pre[1], 0) == 0) {
wpa_printf(MSG_INFO, "ENGINE: ctrl cmd_string failed: "
"%s %s [%s]", pre[0], pre[1],
ERR_error_string(ERR_get_error(), NULL));
ENGINE_free(engine);
return -1;
}
pre += 2;
}
/*
* Free the reference to the "dynamic" engine. The loaded engine can
* now be looked up using ENGINE_by_id().
*/
ENGINE_free(engine);
engine = ENGINE_by_id(id);
if (engine == NULL) {
wpa_printf(MSG_INFO, "ENGINE: Can't find engine %s [%s]",
id, ERR_error_string(ERR_get_error(), NULL));
return -1;
}
while (post && post[0]) {
wpa_printf(MSG_DEBUG, "ENGINE: '%s' '%s'", post[0], post[1]);
if (ENGINE_ctrl_cmd_string(engine, post[0], post[1], 0) == 0) {
wpa_printf(MSG_DEBUG, "ENGINE: ctrl cmd_string failed:"
" %s %s [%s]", post[0], post[1],
ERR_error_string(ERR_get_error(), NULL));
ENGINE_remove(engine);
ENGINE_free(engine);
return -1;
}
post += 2;
}
ENGINE_free(engine);
return 0;
}
/**
* tls_engine_load_dynamic_pkcs11 - load the pkcs11 engine provided by opensc
* @pkcs11_so_path: pksc11_so_path from the configuration
* @pcks11_module_path: pkcs11_module_path from the configuration
*/
static int tls_engine_load_dynamic_pkcs11(const char *pkcs11_so_path,
const char *pkcs11_module_path)
{
char *engine_id = "pkcs11";
const char *pre_cmd[] = {
"SO_PATH", NULL /* pkcs11_so_path */,
"ID", NULL /* engine_id */,
"LIST_ADD", "1",
/* "NO_VCHECK", "1", */
"LOAD", NULL,
NULL, NULL
};
const char *post_cmd[] = {
"MODULE_PATH", NULL /* pkcs11_module_path */,
NULL, NULL
};
if (!pkcs11_so_path)
return 0;
pre_cmd[1] = pkcs11_so_path;
pre_cmd[3] = engine_id;
if (pkcs11_module_path)
post_cmd[1] = pkcs11_module_path;
else
post_cmd[0] = NULL;
wpa_printf(MSG_DEBUG, "ENGINE: Loading pkcs11 Engine from %s",
pkcs11_so_path);
return tls_engine_load_dynamic_generic(pre_cmd, post_cmd, engine_id);
}
/**
* tls_engine_load_dynamic_opensc - load the opensc engine provided by opensc
* @opensc_so_path: opensc_so_path from the configuration
*/
static int tls_engine_load_dynamic_opensc(const char *opensc_so_path)
{
char *engine_id = "opensc";
const char *pre_cmd[] = {
"SO_PATH", NULL /* opensc_so_path */,
"ID", NULL /* engine_id */,
"LIST_ADD", "1",
"LOAD", NULL,
NULL, NULL
};
if (!opensc_so_path)
return 0;
pre_cmd[1] = opensc_so_path;
pre_cmd[3] = engine_id;
wpa_printf(MSG_DEBUG, "ENGINE: Loading OpenSC Engine from %s",
opensc_so_path);
return tls_engine_load_dynamic_generic(pre_cmd, NULL, engine_id);
}
#endif /* OPENSSL_NO_ENGINE */
void * tls_init(const struct tls_config *conf)
{
SSL_CTX *ssl;
struct tls_context *context;
const char *ciphers;
if (tls_openssl_ref_count == 0) {
tls_global = context = tls_context_new(conf);
if (context == NULL)
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
return NULL;
#ifdef CONFIG_FIPS
#ifdef OPENSSL_FIPS
if (conf && conf->fips_mode) {
if (!FIPS_mode_set(1)) {
wpa_printf(MSG_ERROR, "Failed to enable FIPS "
"mode");
ERR_load_crypto_strings();
ERR_print_errors_fp(stderr);
os_free(tls_global);
tls_global = NULL;
return NULL;
} else
wpa_printf(MSG_INFO, "Running in FIPS mode");
}
#else /* OPENSSL_FIPS */
if (conf && conf->fips_mode) {
wpa_printf(MSG_ERROR, "FIPS mode requested, but not "
"supported");
os_free(tls_global);
tls_global = NULL;
return NULL;
}
#endif /* OPENSSL_FIPS */
#endif /* CONFIG_FIPS */
SSL_load_error_strings();
SSL_library_init();
#ifndef OPENSSL_NO_SHA256
EVP_add_digest(EVP_sha256());
#endif /* OPENSSL_NO_SHA256 */
/* TODO: if /dev/urandom is available, PRNG is seeded
* automatically. If this is not the case, random data should
* be added here. */
#ifdef PKCS12_FUNCS
#ifndef OPENSSL_NO_RC2
/*
* 40-bit RC2 is commonly used in PKCS#12 files, so enable it.
* This is enabled by PKCS12_PBE_add() in OpenSSL 0.9.8
* versions, but it looks like OpenSSL 1.0.0 does not do that
* anymore.
*/
EVP_add_cipher(EVP_rc2_40_cbc());
#endif /* OPENSSL_NO_RC2 */
PKCS12_PBE_add();
#endif /* PKCS12_FUNCS */
} else {
#ifdef OPENSSL_SUPPORTS_CTX_APP_DATA
/* Newer OpenSSL can store app-data per-SSL */
context = tls_context_new(conf);
if (context == NULL)
return NULL;
#else /* OPENSSL_SUPPORTS_CTX_APP_DATA */
context = tls_global;
#endif /* OPENSSL_SUPPORTS_CTX_APP_DATA */
}
tls_openssl_ref_count++;
ssl = SSL_CTX_new(SSLv23_method());
if (ssl == NULL) {
tls_openssl_ref_count--;
#ifdef OPENSSL_SUPPORTS_CTX_APP_DATA
if (context != tls_global)
os_free(context);
#endif /* OPENSSL_SUPPORTS_CTX_APP_DATA */
if (tls_openssl_ref_count == 0) {
os_free(tls_global);
tls_global = NULL;
}
return NULL;
}
SSL_CTX_set_options(ssl, SSL_OP_NO_SSLv2);
SSL_CTX_set_options(ssl, SSL_OP_NO_SSLv3);
SSL_CTX_set_info_callback(ssl, ssl_info_cb);
#ifdef OPENSSL_SUPPORTS_CTX_APP_DATA
SSL_CTX_set_app_data(ssl, context);
#endif /* OPENSSL_SUPPORTS_CTX_APP_DATA */
#ifndef OPENSSL_NO_ENGINE
wpa_printf(MSG_DEBUG, "ENGINE: Loading dynamic engine");
ERR_load_ENGINE_strings();
ENGINE_load_dynamic();
if (conf &&
(conf->opensc_engine_path || conf->pkcs11_engine_path ||
conf->pkcs11_module_path)) {
if (tls_engine_load_dynamic_opensc(conf->opensc_engine_path) ||
tls_engine_load_dynamic_pkcs11(conf->pkcs11_engine_path,
conf->pkcs11_module_path)) {
tls_deinit(ssl);
return NULL;
}
}
#endif /* OPENSSL_NO_ENGINE */
if (conf && conf->openssl_ciphers)
ciphers = conf->openssl_ciphers;
else
ciphers = "DEFAULT:!EXP:!LOW";
if (SSL_CTX_set_cipher_list(ssl, ciphers) != 1) {
wpa_printf(MSG_ERROR,
"OpenSSL: Failed to set cipher string '%s'",
ciphers);
tls_deinit(ssl);
return NULL;
}
return ssl;
}
void tls_deinit(void *ssl_ctx)
{
SSL_CTX *ssl = ssl_ctx;
#ifdef OPENSSL_SUPPORTS_CTX_APP_DATA
struct tls_context *context = SSL_CTX_get_app_data(ssl);
if (context != tls_global)
os_free(context);
#endif /* OPENSSL_SUPPORTS_CTX_APP_DATA */
SSL_CTX_free(ssl);
tls_openssl_ref_count--;
if (tls_openssl_ref_count == 0) {
#ifndef OPENSSL_NO_ENGINE
ENGINE_cleanup();
#endif /* OPENSSL_NO_ENGINE */
CRYPTO_cleanup_all_ex_data();
ERR_remove_thread_state(NULL);
ERR_free_strings();
EVP_cleanup();
os_free(tls_global->ocsp_stapling_response);
tls_global->ocsp_stapling_response = NULL;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
os_free(tls_global);
tls_global = NULL;
}
}
static int tls_engine_init(struct tls_connection *conn, const char *engine_id,
const char *pin, const char *key_id,
const char *cert_id, const char *ca_cert_id)
{
#ifndef OPENSSL_NO_ENGINE
int ret = -1;
if (engine_id == NULL) {
wpa_printf(MSG_ERROR, "ENGINE: Engine ID not set");
return -1;
}
ERR_clear_error();
#ifdef ANDROID
ENGINE_load_dynamic();
#endif
conn->engine = ENGINE_by_id(engine_id);
if (!conn->engine) {
wpa_printf(MSG_ERROR, "ENGINE: engine %s not available [%s]",
engine_id, ERR_error_string(ERR_get_error(), NULL));
goto err;
}
if (ENGINE_init(conn->engine) != 1) {
wpa_printf(MSG_ERROR, "ENGINE: engine init failed "
"(engine: %s) [%s]", engine_id,
ERR_error_string(ERR_get_error(), NULL));
goto err;
}
wpa_printf(MSG_DEBUG, "ENGINE: engine initialized");
#ifndef ANDROID
if (pin && ENGINE_ctrl_cmd_string(conn->engine, "PIN", pin, 0) == 0) {
wpa_printf(MSG_ERROR, "ENGINE: cannot set pin [%s]",
ERR_error_string(ERR_get_error(), NULL));
goto err;
}
#endif
if (key_id) {
/*
* Ensure that the ENGINE does not attempt to use the OpenSSL
* UI system to obtain a PIN, if we didn't provide one.
*/
struct {
const void *password;
const char *prompt_info;
} key_cb = { "", NULL };
/* load private key first in-case PIN is required for cert */
conn->private_key = ENGINE_load_private_key(conn->engine,
key_id, NULL,
&key_cb);
if (!conn->private_key) {
wpa_printf(MSG_ERROR,
"ENGINE: cannot load private key with id '%s' [%s]",
key_id,
ERR_error_string(ERR_get_error(), NULL));
ret = TLS_SET_PARAMS_ENGINE_PRV_INIT_FAILED;
goto err;
}
}
/* handle a certificate and/or CA certificate */
if (cert_id || ca_cert_id) {
const char *cmd_name = "LOAD_CERT_CTRL";
/* test if the engine supports a LOAD_CERT_CTRL */
if (!ENGINE_ctrl(conn->engine, ENGINE_CTRL_GET_CMD_FROM_NAME,
0, (void *)cmd_name, NULL)) {
wpa_printf(MSG_ERROR, "ENGINE: engine does not support"
" loading certificates");
ret = TLS_SET_PARAMS_ENGINE_PRV_INIT_FAILED;
goto err;
}
}
return 0;
err:
if (conn->engine) {
ENGINE_free(conn->engine);
conn->engine = NULL;
}
if (conn->private_key) {
EVP_PKEY_free(conn->private_key);
conn->private_key = NULL;
}
return ret;
#else /* OPENSSL_NO_ENGINE */
return 0;
#endif /* OPENSSL_NO_ENGINE */
}
static void tls_engine_deinit(struct tls_connection *conn)
{
#ifndef OPENSSL_NO_ENGINE
wpa_printf(MSG_DEBUG, "ENGINE: engine deinit");
if (conn->private_key) {
EVP_PKEY_free(conn->private_key);
conn->private_key = NULL;
}
if (conn->engine) {
ENGINE_finish(conn->engine);
conn->engine = NULL;
}
#endif /* OPENSSL_NO_ENGINE */
}
int tls_get_errors(void *ssl_ctx)
{
int count = 0;
unsigned long err;
while ((err = ERR_get_error())) {
wpa_printf(MSG_INFO, "TLS - SSL error: %s",
ERR_error_string(err, NULL));
count++;
}
return count;
}
static void tls_msg_cb(int write_p, int version, int content_type,
const void *buf, size_t len, SSL *ssl, void *arg)
{
struct tls_connection *conn = arg;
const u8 *pos = buf;
wpa_printf(MSG_DEBUG, "OpenSSL: %s ver=0x%x content_type=%d",
write_p ? "TX" : "RX", version, content_type);
wpa_hexdump_key(MSG_MSGDUMP, "OpenSSL: Message", buf, len);
if (content_type == 24 && len >= 3 && pos[0] == 1) {
size_t payload_len = WPA_GET_BE16(pos + 1);
if (payload_len + 3 > len) {
wpa_printf(MSG_ERROR, "OpenSSL: Heartbeat attack detected");
conn->invalid_hb_used = 1;
}
}
}
struct tls_connection * tls_connection_init(void *ssl_ctx)
{
SSL_CTX *ssl = ssl_ctx;
struct tls_connection *conn;
long options;
#ifdef OPENSSL_SUPPORTS_CTX_APP_DATA
struct tls_context *context = SSL_CTX_get_app_data(ssl);
#else /* OPENSSL_SUPPORTS_CTX_APP_DATA */
struct tls_context *context = tls_global;
#endif /* OPENSSL_SUPPORTS_CTX_APP_DATA */
conn = os_zalloc(sizeof(*conn));
if (conn == NULL)
return NULL;
conn->ssl_ctx = ssl_ctx;
conn->ssl = SSL_new(ssl);
if (conn->ssl == NULL) {
tls_show_errors(MSG_INFO, __func__,
"Failed to initialize new SSL connection");
os_free(conn);
return NULL;
}
conn->context = context;
SSL_set_app_data(conn->ssl, conn);
SSL_set_msg_callback(conn->ssl, tls_msg_cb);
SSL_set_msg_callback_arg(conn->ssl, conn);
options = SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3 |
SSL_OP_SINGLE_DH_USE;
#ifdef SSL_OP_NO_COMPRESSION
options |= SSL_OP_NO_COMPRESSION;
#endif /* SSL_OP_NO_COMPRESSION */
SSL_set_options(conn->ssl, options);
conn->ssl_in = BIO_new(BIO_s_mem());
if (!conn->ssl_in) {
tls_show_errors(MSG_INFO, __func__,
"Failed to create a new BIO for ssl_in");
SSL_free(conn->ssl);
os_free(conn);
return NULL;
}
conn->ssl_out = BIO_new(BIO_s_mem());
if (!conn->ssl_out) {
tls_show_errors(MSG_INFO, __func__,
"Failed to create a new BIO for ssl_out");
SSL_free(conn->ssl);
BIO_free(conn->ssl_in);
os_free(conn);
return NULL;
}
SSL_set_bio(conn->ssl, conn->ssl_in, conn->ssl_out);
return conn;
}
void tls_connection_deinit(void *ssl_ctx, struct tls_connection *conn)
{
if (conn == NULL)
return;
SSL_free(conn->ssl);
tls_engine_deinit(conn);
os_free(conn->subject_match);
os_free(conn->altsubject_match);
os_free(conn->suffix_match);
os_free(conn->domain_match);
os_free(conn->session_ticket);
os_free(conn);
}
int tls_connection_established(void *ssl_ctx, struct tls_connection *conn)
{
return conn ? SSL_is_init_finished(conn->ssl) : 0;
}
int tls_connection_shutdown(void *ssl_ctx, struct tls_connection *conn)
{
if (conn == NULL)
return -1;
/* Shutdown previous TLS connection without notifying the peer
* because the connection was already terminated in practice
* and "close notify" shutdown alert would confuse AS. */
SSL_set_quiet_shutdown(conn->ssl, 1);
SSL_shutdown(conn->ssl);
return 0;
}
static int tls_match_altsubject_component(X509 *cert, int type,
const char *value, size_t len)
{
GENERAL_NAME *gen;
void *ext;
int found = 0;
stack_index_t i;
ext = X509_get_ext_d2i(cert, NID_subject_alt_name, NULL, NULL);
for (i = 0; ext && i < sk_GENERAL_NAME_num(ext); i++) {
gen = sk_GENERAL_NAME_value(ext, i);
if (gen->type != type)
continue;
if (os_strlen((char *) gen->d.ia5->data) == len &&
os_memcmp(value, gen->d.ia5->data, len) == 0)
found++;
}
return found;
}
static int tls_match_altsubject(X509 *cert, const char *match)
{
int type;
const char *pos, *end;
size_t len;
pos = match;
do {
if (os_strncmp(pos, "EMAIL:", 6) == 0) {
type = GEN_EMAIL;
pos += 6;
} else if (os_strncmp(pos, "DNS:", 4) == 0) {
type = GEN_DNS;
pos += 4;
} else if (os_strncmp(pos, "URI:", 4) == 0) {
type = GEN_URI;
pos += 4;
} else {
wpa_printf(MSG_INFO, "TLS: Invalid altSubjectName "
"match '%s'", pos);
return 0;
}
end = os_strchr(pos, ';');
while (end) {
if (os_strncmp(end + 1, "EMAIL:", 6) == 0 ||
os_strncmp(end + 1, "DNS:", 4) == 0 ||
os_strncmp(end + 1, "URI:", 4) == 0)
break;
end = os_strchr(end + 1, ';');
}
if (end)
len = end - pos;
else
len = os_strlen(pos);
if (tls_match_altsubject_component(cert, type, pos, len) > 0)
return 1;
pos = end + 1;
} while (end);
return 0;
}
#ifndef CONFIG_NATIVE_WINDOWS
static int domain_suffix_match(const u8 *val, size_t len, const char *match,
int full)
{
size_t i, match_len;
/* Check for embedded nuls that could mess up suffix matching */
for (i = 0; i < len; i++) {
if (val[i] == '\0') {
wpa_printf(MSG_DEBUG, "TLS: Embedded null in a string - reject");
return 0;
}
}
match_len = os_strlen(match);
if (match_len > len || (full && match_len != len))
return 0;
if (os_strncasecmp((const char *) val + len - match_len, match,
match_len) != 0)
return 0; /* no match */
if (match_len == len)
return 1; /* exact match */
if (val[len - match_len - 1] == '.')
return 1; /* full label match completes suffix match */
wpa_printf(MSG_DEBUG, "TLS: Reject due to incomplete label match");
return 0;
}
#endif /* CONFIG_NATIVE_WINDOWS */
static int tls_match_suffix(X509 *cert, const char *match, int full)
{
#ifdef CONFIG_NATIVE_WINDOWS
/* wincrypt.h has conflicting X509_NAME definition */
return -1;
#else /* CONFIG_NATIVE_WINDOWS */
GENERAL_NAME *gen;
void *ext;
int i;
stack_index_t j;
int dns_name = 0;
X509_NAME *name;
wpa_printf(MSG_DEBUG, "TLS: Match domain against %s%s",
full ? "": "suffix ", match);
ext = X509_get_ext_d2i(cert, NID_subject_alt_name, NULL, NULL);
for (j = 0; ext && j < sk_GENERAL_NAME_num(ext); j++) {
gen = sk_GENERAL_NAME_value(ext, j);
if (gen->type != GEN_DNS)
continue;
dns_name++;
wpa_hexdump_ascii(MSG_DEBUG, "TLS: Certificate dNSName",
gen->d.dNSName->data,
gen->d.dNSName->length);
if (domain_suffix_match(gen->d.dNSName->data,
gen->d.dNSName->length, match, full) ==
1) {
wpa_printf(MSG_DEBUG, "TLS: %s in dNSName found",
full ? "Match" : "Suffix match");
return 1;
}
}
if (dns_name) {
wpa_printf(MSG_DEBUG, "TLS: None of the dNSName(s) matched");
return 0;
}
name = X509_get_subject_name(cert);
i = -1;
for (;;) {
X509_NAME_ENTRY *e;
ASN1_STRING *cn;
i = X509_NAME_get_index_by_NID(name, NID_commonName, i);
if (i == -1)
break;
e = X509_NAME_get_entry(name, i);
if (e == NULL)
continue;
cn = X509_NAME_ENTRY_get_data(e);
if (cn == NULL)
continue;
wpa_hexdump_ascii(MSG_DEBUG, "TLS: Certificate commonName",
cn->data, cn->length);
if (domain_suffix_match(cn->data, cn->length, match, full) == 1)
{
wpa_printf(MSG_DEBUG, "TLS: %s in commonName found",
full ? "Match" : "Suffix match");
return 1;
}
}
wpa_printf(MSG_DEBUG, "TLS: No CommonName %smatch found",
full ? "": "suffix ");
return 0;
#endif /* CONFIG_NATIVE_WINDOWS */
}
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
static enum tls_fail_reason openssl_tls_fail_reason(int err)
{
switch (err) {
case X509_V_ERR_CERT_REVOKED:
return TLS_FAIL_REVOKED;
case X509_V_ERR_CERT_NOT_YET_VALID:
case X509_V_ERR_CRL_NOT_YET_VALID:
return TLS_FAIL_NOT_YET_VALID;
case X509_V_ERR_CERT_HAS_EXPIRED:
case X509_V_ERR_CRL_HAS_EXPIRED:
return TLS_FAIL_EXPIRED;
case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
case X509_V_ERR_UNABLE_TO_GET_CRL:
case X509_V_ERR_UNABLE_TO_GET_CRL_ISSUER:
case X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN:
case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY:
case X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT:
case X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE:
case X509_V_ERR_CERT_CHAIN_TOO_LONG:
case X509_V_ERR_PATH_LENGTH_EXCEEDED:
case X509_V_ERR_INVALID_CA:
return TLS_FAIL_UNTRUSTED;
case X509_V_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE:
case X509_V_ERR_UNABLE_TO_DECRYPT_CRL_SIGNATURE:
case X509_V_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY:
case X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD:
case X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD:
case X509_V_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD:
case X509_V_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD:
case X509_V_ERR_CERT_UNTRUSTED:
case X509_V_ERR_CERT_REJECTED:
return TLS_FAIL_BAD_CERTIFICATE;
default:
return TLS_FAIL_UNSPECIFIED;
}
}
static struct wpabuf * get_x509_cert(X509 *cert)
{
struct wpabuf *buf;
u8 *tmp;
int cert_len = i2d_X509(cert, NULL);
if (cert_len <= 0)
return NULL;
buf = wpabuf_alloc(cert_len);
if (buf == NULL)
return NULL;
tmp = wpabuf_put(buf, cert_len);
i2d_X509(cert, &tmp);
return buf;
}
static void openssl_tls_fail_event(struct tls_connection *conn,
X509 *err_cert, int err, int depth,
const char *subject, const char *err_str,
enum tls_fail_reason reason)
{
union tls_event_data ev;
struct wpabuf *cert = NULL;
struct tls_context *context = conn->context;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
if (context->event_cb == NULL)
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
return;
cert = get_x509_cert(err_cert);
os_memset(&ev, 0, sizeof(ev));
ev.cert_fail.reason = reason != TLS_FAIL_UNSPECIFIED ?
reason : openssl_tls_fail_reason(err);
ev.cert_fail.depth = depth;
ev.cert_fail.subject = subject;
ev.cert_fail.reason_txt = err_str;
ev.cert_fail.cert = cert;
context->event_cb(context->cb_ctx, TLS_CERT_CHAIN_FAILURE, &ev);
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
wpabuf_free(cert);
}
static void openssl_tls_cert_event(struct tls_connection *conn,
X509 *err_cert, int depth,
const char *subject)
{
struct wpabuf *cert = NULL;
union tls_event_data ev;
struct tls_context *context = conn->context;
char *altsubject[TLS_MAX_ALT_SUBJECT];
int alt, num_altsubject = 0;
GENERAL_NAME *gen;
void *ext;
stack_index_t i;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
#ifdef CONFIG_SHA256
u8 hash[32];
#endif /* CONFIG_SHA256 */
if (context->event_cb == NULL)
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
return;
os_memset(&ev, 0, sizeof(ev));
if (conn->cert_probe || context->cert_in_cb) {
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
cert = get_x509_cert(err_cert);
ev.peer_cert.cert = cert;
}
#ifdef CONFIG_SHA256
if (cert) {
const u8 *addr[1];
size_t len[1];
addr[0] = wpabuf_head(cert);
len[0] = wpabuf_len(cert);
if (sha256_vector(1, addr, len, hash) == 0) {
ev.peer_cert.hash = hash;
ev.peer_cert.hash_len = sizeof(hash);
}
}
#endif /* CONFIG_SHA256 */
ev.peer_cert.depth = depth;
ev.peer_cert.subject = subject;
ext = X509_get_ext_d2i(err_cert, NID_subject_alt_name, NULL, NULL);
for (i = 0; ext && i < sk_GENERAL_NAME_num(ext); i++) {
char *pos;
if (num_altsubject == TLS_MAX_ALT_SUBJECT)
break;
gen = sk_GENERAL_NAME_value(ext, i);
if (gen->type != GEN_EMAIL &&
gen->type != GEN_DNS &&
gen->type != GEN_URI)
continue;
pos = os_malloc(10 + gen->d.ia5->length + 1);
if (pos == NULL)
break;
altsubject[num_altsubject++] = pos;
switch (gen->type) {
case GEN_EMAIL:
os_memcpy(pos, "EMAIL:", 6);
pos += 6;
break;
case GEN_DNS:
os_memcpy(pos, "DNS:", 4);
pos += 4;
break;
case GEN_URI:
os_memcpy(pos, "URI:", 4);
pos += 4;
break;
}
os_memcpy(pos, gen->d.ia5->data, gen->d.ia5->length);
pos += gen->d.ia5->length;
*pos = '\0';
}
for (alt = 0; alt < num_altsubject; alt++)
ev.peer_cert.altsubject[alt] = altsubject[alt];
ev.peer_cert.num_altsubject = num_altsubject;
context->event_cb(context->cb_ctx, TLS_PEER_CERTIFICATE, &ev);
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
wpabuf_free(cert);
for (alt = 0; alt < num_altsubject; alt++)
os_free(altsubject[alt]);
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
}
static int tls_verify_cb(int preverify_ok, X509_STORE_CTX *x509_ctx)
{
char buf[256];
X509 *err_cert;
int err, depth;
SSL *ssl;
struct tls_connection *conn;
struct tls_context *context;
char *match, *altmatch, *suffix_match, *domain_match;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
const char *err_str;
err_cert = X509_STORE_CTX_get_current_cert(x509_ctx);
if (!err_cert)
return 0;
err = X509_STORE_CTX_get_error(x509_ctx);
depth = X509_STORE_CTX_get_error_depth(x509_ctx);
ssl = X509_STORE_CTX_get_ex_data(x509_ctx,
SSL_get_ex_data_X509_STORE_CTX_idx());
X509_NAME_oneline(X509_get_subject_name(err_cert), buf, sizeof(buf));
conn = SSL_get_app_data(ssl);
if (conn == NULL)
return 0;
if (depth == 0)
conn->peer_cert = err_cert;
else if (depth == 1)
conn->peer_issuer = err_cert;
else if (depth == 2)
conn->peer_issuer_issuer = err_cert;
context = conn->context;
match = conn->subject_match;
altmatch = conn->altsubject_match;
suffix_match = conn->suffix_match;
domain_match = conn->domain_match;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
if (!preverify_ok && !conn->ca_cert_verify)
preverify_ok = 1;
if (!preverify_ok && depth > 0 && conn->server_cert_only)
preverify_ok = 1;
if (!preverify_ok && (conn->flags & TLS_CONN_DISABLE_TIME_CHECKS) &&
(err == X509_V_ERR_CERT_HAS_EXPIRED ||
err == X509_V_ERR_CERT_NOT_YET_VALID)) {
wpa_printf(MSG_DEBUG, "OpenSSL: Ignore certificate validity "
"time mismatch");
preverify_ok = 1;
}
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
err_str = X509_verify_cert_error_string(err);
#ifdef CONFIG_SHA256
/*
* Do not require preverify_ok so we can explicity allow otherwise
* invalid pinned server certificates.
*/
if (depth == 0 && conn->server_cert_only) {
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
struct wpabuf *cert;
cert = get_x509_cert(err_cert);
if (!cert) {
wpa_printf(MSG_DEBUG, "OpenSSL: Could not fetch "
"server certificate data");
preverify_ok = 0;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
} else {
u8 hash[32];
const u8 *addr[1];
size_t len[1];
addr[0] = wpabuf_head(cert);
len[0] = wpabuf_len(cert);
if (sha256_vector(1, addr, len, hash) < 0 ||
os_memcmp(conn->srv_cert_hash, hash, 32) != 0) {
err_str = "Server certificate mismatch";
err = X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN;
preverify_ok = 0;
} else if (!preverify_ok) {
/*
* Certificate matches pinned certificate, allow
* regardless of other problems.
*/
wpa_printf(MSG_DEBUG,
"OpenSSL: Ignore validation issues for a pinned server certificate");
preverify_ok = 1;
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
}
wpabuf_free(cert);
}
}
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
#endif /* CONFIG_SHA256 */
if (!preverify_ok) {
wpa_printf(MSG_WARNING, "TLS: Certificate verification failed,"
" error %d (%s) depth %d for '%s'", err, err_str,
depth, buf);
openssl_tls_fail_event(conn, err_cert, err, depth, buf,
err_str, TLS_FAIL_UNSPECIFIED);
return preverify_ok;
}
wpa_printf(MSG_DEBUG, "TLS: tls_verify_cb - preverify_ok=%d "
"err=%d (%s) ca_cert_verify=%d depth=%d buf='%s'",
preverify_ok, err, err_str,
conn->ca_cert_verify, depth, buf);
if (depth == 0 && match && os_strstr(buf, match) == NULL) {
wpa_printf(MSG_WARNING, "TLS: Subject '%s' did not "
"match with '%s'", buf, match);
preverify_ok = 0;
openssl_tls_fail_event(conn, err_cert, err, depth, buf,
"Subject mismatch",
TLS_FAIL_SUBJECT_MISMATCH);
} else if (depth == 0 && altmatch &&
!tls_match_altsubject(err_cert, altmatch)) {
wpa_printf(MSG_WARNING, "TLS: altSubjectName match "
"'%s' not found", altmatch);
preverify_ok = 0;
openssl_tls_fail_event(conn, err_cert, err, depth, buf,
"AltSubject mismatch",
TLS_FAIL_ALTSUBJECT_MISMATCH);
} else if (depth == 0 && suffix_match &&
!tls_match_suffix(err_cert, suffix_match, 0)) {
wpa_printf(MSG_WARNING, "TLS: Domain suffix match '%s' not found",
suffix_match);
preverify_ok = 0;
openssl_tls_fail_event(conn, err_cert, err, depth, buf,
"Domain suffix mismatch",
TLS_FAIL_DOMAIN_SUFFIX_MISMATCH);
} else if (depth == 0 && domain_match &&
!tls_match_suffix(err_cert, domain_match, 1)) {
wpa_printf(MSG_WARNING, "TLS: Domain match '%s' not found",
domain_match);
preverify_ok = 0;
openssl_tls_fail_event(conn, err_cert, err, depth, buf,
"Domain mismatch",
TLS_FAIL_DOMAIN_MISMATCH);
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
} else
openssl_tls_cert_event(conn, err_cert, depth, buf);
if (conn->cert_probe && preverify_ok && depth == 0) {
wpa_printf(MSG_DEBUG, "OpenSSL: Reject server certificate "
"on probe-only run");
preverify_ok = 0;
openssl_tls_fail_event(conn, err_cert, err, depth, buf,
"Server certificate chain probe",
TLS_FAIL_SERVER_CHAIN_PROBE);
}
if (preverify_ok && context->event_cb != NULL)
context->event_cb(context->cb_ctx,
TLS_CERT_CHAIN_SUCCESS, NULL);
return preverify_ok;
}
#ifndef OPENSSL_NO_STDIO
static int tls_load_ca_der(void *_ssl_ctx, const char *ca_cert)
{
SSL_CTX *ssl_ctx = _ssl_ctx;
X509_LOOKUP *lookup;
int ret = 0;
lookup = X509_STORE_add_lookup(SSL_CTX_get_cert_store(ssl_ctx),
X509_LOOKUP_file());
if (lookup == NULL) {
tls_show_errors(MSG_WARNING, __func__,
"Failed add lookup for X509 store");
return -1;
}
if (!X509_LOOKUP_load_file(lookup, ca_cert, X509_FILETYPE_ASN1)) {
unsigned long err = ERR_peek_error();
tls_show_errors(MSG_WARNING, __func__,
"Failed load CA in DER format");
if (ERR_GET_LIB(err) == ERR_LIB_X509 &&
ERR_GET_REASON(err) == X509_R_CERT_ALREADY_IN_HASH_TABLE) {
wpa_printf(MSG_DEBUG, "OpenSSL: %s - ignoring "
"cert already in hash table error",
__func__);
} else
ret = -1;
}
return ret;
}
#endif /* OPENSSL_NO_STDIO */
static int tls_connection_ca_cert(void *_ssl_ctx, struct tls_connection *conn,
const char *ca_cert, const u8 *ca_cert_blob,
size_t ca_cert_blob_len, const char *ca_path)
{
SSL_CTX *ssl_ctx = _ssl_ctx;
X509_STORE *store;
/*
* Remove previously configured trusted CA certificates before adding
* new ones.
*/
store = X509_STORE_new();
if (store == NULL) {
wpa_printf(MSG_DEBUG, "OpenSSL: %s - failed to allocate new "
"certificate store", __func__);
return -1;
}
SSL_CTX_set_cert_store(ssl_ctx, store);
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
SSL_set_verify(conn->ssl, SSL_VERIFY_PEER, tls_verify_cb);
conn->ca_cert_verify = 1;
if (ca_cert && os_strncmp(ca_cert, "probe://", 8) == 0) {
wpa_printf(MSG_DEBUG, "OpenSSL: Probe for server certificate "
"chain");
conn->cert_probe = 1;
conn->ca_cert_verify = 0;
return 0;
}
if (ca_cert && os_strncmp(ca_cert, "hash://", 7) == 0) {
#ifdef CONFIG_SHA256
const char *pos = ca_cert + 7;
if (os_strncmp(pos, "server/sha256/", 14) != 0) {
wpa_printf(MSG_DEBUG, "OpenSSL: Unsupported ca_cert "
"hash value '%s'", ca_cert);
return -1;
}
pos += 14;
if (os_strlen(pos) != 32 * 2) {
wpa_printf(MSG_DEBUG, "OpenSSL: Unexpected SHA256 "
"hash length in ca_cert '%s'", ca_cert);
return -1;
}
if (hexstr2bin(pos, conn->srv_cert_hash, 32) < 0) {
wpa_printf(MSG_DEBUG, "OpenSSL: Invalid SHA256 hash "
"value in ca_cert '%s'", ca_cert);
return -1;
}
conn->server_cert_only = 1;
wpa_printf(MSG_DEBUG, "OpenSSL: Checking only server "
"certificate match");
return 0;
#else /* CONFIG_SHA256 */
wpa_printf(MSG_INFO, "No SHA256 included in the build - "
"cannot validate server certificate hash");
return -1;
#endif /* CONFIG_SHA256 */
}
if (ca_cert_blob) {
X509 *cert = d2i_X509(NULL,
(const unsigned char **) &ca_cert_blob,
ca_cert_blob_len);
if (cert == NULL) {
tls_show_errors(MSG_WARNING, __func__,
"Failed to parse ca_cert_blob");
return -1;
}
if (!X509_STORE_add_cert(SSL_CTX_get_cert_store(ssl_ctx),
cert)) {
unsigned long err = ERR_peek_error();
tls_show_errors(MSG_WARNING, __func__,
"Failed to add ca_cert_blob to "
"certificate store");
if (ERR_GET_LIB(err) == ERR_LIB_X509 &&
ERR_GET_REASON(err) ==
X509_R_CERT_ALREADY_IN_HASH_TABLE) {
wpa_printf(MSG_DEBUG, "OpenSSL: %s - ignoring "
"cert already in hash table error",
__func__);
} else {
X509_free(cert);
return -1;
}
}
X509_free(cert);
wpa_printf(MSG_DEBUG, "OpenSSL: %s - added ca_cert_blob "
"to certificate store", __func__);
return 0;
}
#ifdef ANDROID
if (ca_cert && os_strncmp("keystore://", ca_cert, 11) == 0) {
BIO *bio = BIO_from_keystore(&ca_cert[11]);
STACK_OF(X509_INFO) *stack = NULL;
stack_index_t i;
if (bio) {
stack = PEM_X509_INFO_read_bio(bio, NULL, NULL, NULL);
BIO_free(bio);
}
if (!stack)
return -1;
for (i = 0; i < sk_X509_INFO_num(stack); ++i) {
X509_INFO *info = sk_X509_INFO_value(stack, i);
if (info->x509) {
X509_STORE_add_cert(ssl_ctx->cert_store,
info->x509);
}
if (info->crl) {
X509_STORE_add_crl(ssl_ctx->cert_store,
info->crl);
}
}
sk_X509_INFO_pop_free(stack, X509_INFO_free);
SSL_set_verify(conn->ssl, SSL_VERIFY_PEER, tls_verify_cb);
return 0;
}
#endif /* ANDROID */
#ifdef CONFIG_NATIVE_WINDOWS
if (ca_cert && tls_cryptoapi_ca_cert(ssl_ctx, conn->ssl, ca_cert) ==
0) {
wpa_printf(MSG_DEBUG, "OpenSSL: Added CA certificates from "
"system certificate store");
return 0;
}
#endif /* CONFIG_NATIVE_WINDOWS */
if (ca_cert || ca_path) {
#ifndef OPENSSL_NO_STDIO
if (SSL_CTX_load_verify_locations(ssl_ctx, ca_cert, ca_path) !=
1) {
tls_show_errors(MSG_WARNING, __func__,
"Failed to load root certificates");
if (ca_cert &&
tls_load_ca_der(ssl_ctx, ca_cert) == 0) {
wpa_printf(MSG_DEBUG, "OpenSSL: %s - loaded "
"DER format CA certificate",
__func__);
} else
return -1;
} else {
wpa_printf(MSG_DEBUG, "TLS: Trusted root "
"certificate(s) loaded");
tls_get_errors(ssl_ctx);
}
#else /* OPENSSL_NO_STDIO */
wpa_printf(MSG_DEBUG, "OpenSSL: %s - OPENSSL_NO_STDIO",
__func__);
return -1;
#endif /* OPENSSL_NO_STDIO */
} else {
/* No ca_cert configured - do not try to verify server
* certificate */
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
conn->ca_cert_verify = 0;
}
return 0;
}
static int tls_global_ca_cert(SSL_CTX *ssl_ctx, const char *ca_cert)
{
if (ca_cert) {
if (SSL_CTX_load_verify_locations(ssl_ctx, ca_cert, NULL) != 1)
{
tls_show_errors(MSG_WARNING, __func__,
"Failed to load root certificates");
return -1;
}
wpa_printf(MSG_DEBUG, "TLS: Trusted root "
"certificate(s) loaded");
#ifndef OPENSSL_NO_STDIO
/* Add the same CAs to the client certificate requests */
SSL_CTX_set_client_CA_list(ssl_ctx,
SSL_load_client_CA_file(ca_cert));
#endif /* OPENSSL_NO_STDIO */
}
return 0;
}
int tls_global_set_verify(void *ssl_ctx, int check_crl)
{
int flags;
if (check_crl) {
X509_STORE *cs = SSL_CTX_get_cert_store(ssl_ctx);
if (cs == NULL) {
tls_show_errors(MSG_INFO, __func__, "Failed to get "
"certificate store when enabling "
"check_crl");
return -1;
}
flags = X509_V_FLAG_CRL_CHECK;
if (check_crl == 2)
flags |= X509_V_FLAG_CRL_CHECK_ALL;
X509_STORE_set_flags(cs, flags);
}
return 0;
}
static int tls_connection_set_subject_match(struct tls_connection *conn,
const char *subject_match,
const char *altsubject_match,
const char *suffix_match,
const char *domain_match)
{
os_free(conn->subject_match);
conn->subject_match = NULL;
if (subject_match) {
conn->subject_match = os_strdup(subject_match);
if (conn->subject_match == NULL)
return -1;
}
os_free(conn->altsubject_match);
conn->altsubject_match = NULL;
if (altsubject_match) {
conn->altsubject_match = os_strdup(altsubject_match);
if (conn->altsubject_match == NULL)
return -1;
}
os_free(conn->suffix_match);
conn->suffix_match = NULL;
if (suffix_match) {
conn->suffix_match = os_strdup(suffix_match);
if (conn->suffix_match == NULL)
return -1;
}
os_free(conn->domain_match);
conn->domain_match = NULL;
if (domain_match) {
conn->domain_match = os_strdup(domain_match);
if (conn->domain_match == NULL)
return -1;
}
return 0;
}
int tls_connection_set_verify(void *ssl_ctx, struct tls_connection *conn,
int verify_peer)
{
static int counter = 0;
if (conn == NULL)
return -1;
if (verify_peer) {
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
conn->ca_cert_verify = 1;
SSL_set_verify(conn->ssl, SSL_VERIFY_PEER |
SSL_VERIFY_FAIL_IF_NO_PEER_CERT |
SSL_VERIFY_CLIENT_ONCE, tls_verify_cb);
} else {
Add TLS client events, server probing, and srv cert matching This allows external programs (e.g., UI) to get more information about server certificate chain used during TLS handshake. This can be used both to automatically probe the authentication server to figure out most likely network configuration and to get information about reasons for failed authentications. The follow new control interface events are used for this: CTRL-EVENT-EAP-PEER-CERT CTRL-EVENT-EAP-TLS-CERT-ERROR In addition, there is now an option for matching the server certificate instead of the full certificate chain for cases where a trusted CA is not configured or even known. This can be used, e.g., by first probing the network and learning the server certificate hash based on the new events and then adding a network configuration with the server certificate hash after user have accepted it. Future connections will then be allowed as long as the same server certificate is used. Authentication server probing can be done, e.g., with following configuration options: eap=TTLS PEAP TLS identity="" ca_cert="probe://" Example set of control events for this: CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe' CTRL-EVENT-EAP-FAILURE EAP authentication failed Server certificate matching is configured with ca_cert, e.g.: ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" This functionality is currently available only with OpenSSL. Other TLS libraries (including internal implementation) may be added in the future.
2010-02-13 04:14:23 -05:00
conn->ca_cert_verify = 0;
SSL_set_verify(conn->ssl, SSL_VERIFY_NONE, NULL);
}
SSL_set_accept_state(conn->ssl);
/*
* Set session id context in order to avoid fatal errors when client
* tries to resume a session. However, set the context to a unique
* value in order to effectively disable session resumption for now
* since not all areas of the server code are ready for it (e.g.,
* EAP-TTLS needs special handling for Phase 2 after abbreviated TLS
* handshake).
*/
counter++;
SSL_set_session_id_context(conn->ssl,
(const unsigned char *) &counter,
sizeof(counter));
return 0;
}
static int tls_connection_client_cert(struct tls_connection *conn,
const char *client_cert,
const u8 *client_cert_blob,
size_t client_cert_blob_len)
{
if (client_cert == NULL && client_cert_blob == NULL)
return 0;
if (client_cert_blob &&
SSL_use_certificate_ASN1(conn->ssl, (u8 *) client_cert_blob,
client_cert_blob_len) == 1) {
wpa_printf(MSG_DEBUG, "OpenSSL: SSL_use_certificate_ASN1 --> "
"OK");
return 0;
} else if (client_cert_blob) {
tls_show_errors(MSG_DEBUG, __func__,
"SSL_use_certificate_ASN1 failed");
}
if (client_cert == NULL)
return -1;
#ifdef ANDROID
if (os_strncmp("keystore://", client_cert, 11) == 0) {
BIO *bio = BIO_from_keystore(&client_cert[11]);
X509 *x509 = NULL;
int ret = -1;
if (bio) {
x509 = PEM_read_bio_X509(bio, NULL, NULL, NULL);
BIO_free(bio);
}
if (x509) {
if (SSL_use_certificate(conn->ssl, x509) == 1)
ret = 0;
X509_free(x509);
}
return ret;
}
#endif /* ANDROID */
#ifndef OPENSSL_NO_STDIO
if (SSL_use_certificate_file(conn->ssl, client_cert,
SSL_FILETYPE_ASN1) == 1) {
wpa_printf(MSG_DEBUG, "OpenSSL: SSL_use_certificate_file (DER)"
" --> OK");
return 0;
}
if (SSL_use_certificate_file(conn->ssl, client_cert,
SSL_FILETYPE_PEM) == 1) {
ERR_clear_error();
wpa_printf(MSG_DEBUG, "OpenSSL: SSL_use_certificate_file (PEM)"
" --> OK");
return 0;
}
tls_show_errors(MSG_DEBUG, __func__,
"SSL_use_certificate_file failed");
#else /* OPENSSL_NO_STDIO */
wpa_printf(MSG_DEBUG, "OpenSSL: %s - OPENSSL_NO_STDIO", __func__);
#endif /* OPENSSL_NO_STDIO */
return -1;
}
static int tls_global_client_cert(SSL_CTX *ssl_ctx, const char *client_cert)
{
#ifndef OPENSSL_NO_STDIO
if (client_cert == NULL)
return 0;
if (SSL_CTX_use_certificate_file(ssl_ctx, client_cert,
SSL_FILETYPE_ASN1) != 1 &&
SSL_CTX_use_certificate_chain_file(ssl_ctx, client_cert) != 1 &&
SSL_CTX_use_certificate_file(ssl_ctx, client_cert,
SSL_FILETYPE_PEM) != 1) {
tls_show_errors(MSG_INFO, __func__,
"Failed to load client certificate");
return -1;
}
return 0;
#else /* OPENSSL_NO_STDIO */
if (client_cert == NULL)
return 0;
wpa_printf(MSG_DEBUG, "OpenSSL: %s - OPENSSL_NO_STDIO", __func__);
return -1;
#endif /* OPENSSL_NO_STDIO */
}
static int tls_passwd_cb(char *buf, int size, int rwflag, void *password)
{
if (password == NULL) {
return 0;
}
os_strlcpy(buf, (char *) password, size);
return os_strlen(buf);
}
#ifdef PKCS12_FUNCS
static int tls_parse_pkcs12(SSL_CTX *ssl_ctx, SSL *ssl, PKCS12 *p12,
const char *passwd)
{
EVP_PKEY *pkey;
X509 *cert;
STACK_OF(X509) *certs;
int res = 0;
char buf[256];
pkey = NULL;
cert = NULL;
certs = NULL;
if (!PKCS12_parse(p12, passwd, &pkey, &cert, &certs)) {
tls_show_errors(MSG_DEBUG, __func__,
"Failed to parse PKCS12 file");
PKCS12_free(p12);
return -1;
}
wpa_printf(MSG_DEBUG, "TLS: Successfully parsed PKCS12 data");
if (cert) {
X509_NAME_oneline(X509_get_subject_name(cert), buf,
sizeof(buf));
wpa_printf(MSG_DEBUG, "TLS: Got certificate from PKCS12: "
"subject='%s'", buf);
if (ssl) {
if (SSL_use_certificate(ssl, cert) != 1)
res = -1;
} else {
if (SSL_CTX_use_certificate(ssl_ctx, cert) != 1)
res = -1;
}
X509_free(cert);
}
if (pkey) {
wpa_printf(MSG_DEBUG, "TLS: Got private key from PKCS12");
if (ssl) {
if (SSL_use_PrivateKey(ssl, pkey) != 1)
res = -1;
} else {
if (SSL_CTX_use_PrivateKey(ssl_ctx, pkey) != 1)
res = -1;
}
EVP_PKEY_free(pkey);
}
if (certs) {
while ((cert = sk_X509_pop(certs)) != NULL) {
X509_NAME_oneline(X509_get_subject_name(cert), buf,
sizeof(buf));
wpa_printf(MSG_DEBUG, "TLS: additional certificate"
" from PKCS12: subject='%s'", buf);
/*
* There is no SSL equivalent for the chain cert - so
* always add it to the context...
*/
if (SSL_CTX_add_extra_chain_cert(ssl_ctx, cert) != 1) {
res = -1;
break;
}
}
sk_X509_free(certs);
}
PKCS12_free(p12);
if (res < 0)
tls_get_errors(ssl_ctx);
return res;
}
#endif /* PKCS12_FUNCS */
static int tls_read_pkcs12(SSL_CTX *ssl_ctx, SSL *ssl, const char *private_key,
const char *passwd)
{
#ifdef PKCS12_FUNCS
FILE *f;
PKCS12 *p12;
f = fopen(private_key, "rb");
if (f == NULL)
return -1;
p12 = d2i_PKCS12_fp(f, NULL);
fclose(f);
if (p12 == NULL) {
tls_show_errors(MSG_INFO, __func__,
"Failed to use PKCS#12 file");
return -1;
}
return tls_parse_pkcs12(ssl_ctx, ssl, p12, passwd);
#else /* PKCS12_FUNCS */
wpa_printf(MSG_INFO, "TLS: PKCS12 support disabled - cannot read "
"p12/pfx files");
return -1;
#endif /* PKCS12_FUNCS */
}
static int tls_read_pkcs12_blob(SSL_CTX *ssl_ctx, SSL *ssl,
const u8 *blob, size_t len, const char *passwd)
{
#ifdef PKCS12_FUNCS
PKCS12 *p12;
p12 = d2i_PKCS12(NULL, (const unsigned char **) &blob, len);
if (p12 == NULL) {
tls_show_errors(MSG_INFO, __func__,
"Failed to use PKCS#12 blob");
return -1;
}
return tls_parse_pkcs12(ssl_ctx, ssl, p12, passwd);
#else /* PKCS12_FUNCS */
wpa_printf(MSG_INFO, "TLS: PKCS12 support disabled - cannot parse "
"p12/pfx blobs");
return -1;
#endif /* PKCS12_FUNCS */
}
#ifndef OPENSSL_NO_ENGINE
static int tls_engine_get_cert(struct tls_connection *conn,
const char *cert_id,
X509 **cert)
{
/* this runs after the private key is loaded so no PIN is required */
struct {
const char *cert_id;
X509 *cert;
} params;
params.cert_id = cert_id;
params.cert = NULL;
if (!ENGINE_ctrl_cmd(conn->engine, "LOAD_CERT_CTRL",
0, &params, NULL, 1)) {
wpa_printf(MSG_ERROR, "ENGINE: cannot load client cert with id"
" '%s' [%s]", cert_id,
ERR_error_string(ERR_get_error(), NULL));
return TLS_SET_PARAMS_ENGINE_PRV_INIT_FAILED;
}
if (!params.cert) {
wpa_printf(MSG_ERROR, "ENGINE: did not properly cert with id"
" '%s'", cert_id);
return TLS_SET_PARAMS_ENGINE_PRV_INIT_FAILED;
}
*cert = params.cert;
return 0;
}
#endif /* OPENSSL_NO_ENGINE */
static int tls_connection_engine_client_cert(struct tls_connection *conn,
const char *cert_id)
{
#ifndef OPENSSL_NO_ENGINE
X509 *cert;
if (tls_engine_get_cert(conn, cert_id, &cert))
return -1;
if (!SSL_use_certificate(conn->ssl, cert)) {
tls_show_errors(MSG_ERROR, __func__,
"SSL_use_certificate failed");
X509_free(cert);
return -1;
}
X509_free(cert);
wpa_printf(MSG_DEBUG, "ENGINE: SSL_use_certificate --> "
"OK");
return 0;
#else /* OPENSSL_NO_ENGINE */
return -1;
#endif /* OPENSSL_NO_ENGINE */
}
static int tls_connection_engine_ca_cert(void *_ssl_ctx,
struct tls_connection *conn,
const char *ca_cert_id)
{
#ifndef OPENSSL_NO_ENGINE
X509 *cert;
SSL_CTX *ssl_ctx = _ssl_ctx;
X509_STORE *store;
if (tls_engine_get_cert(conn, ca_cert_id, &cert))
return -1;
/* start off the same as tls_connection_ca_cert */
store = X509_STORE_new();
if (store == NULL) {
wpa_printf(MSG_DEBUG, "OpenSSL: %s - failed to allocate new "
"certificate store", __func__);
X509_free(cert);
return -1;
}
SSL_CTX_set_cert_store(ssl_ctx, store);
if (!X509_STORE_add_cert(store, cert)) {
unsigned long err = ERR_peek_error();
tls_show_errors(MSG_WARNING, __func__,
"Failed to add CA certificate from engine "
"to certificate store");
if (ERR_GET_LIB(err) == ERR_LIB_X509 &&
ERR_GET_REASON(err) == X509_R_CERT_ALREADY_IN_HASH_TABLE) {
wpa_printf(MSG_DEBUG, "OpenSSL: %s - ignoring cert"
" already in hash table error",
__func__);
} else {
X509_free(cert);
return -1;
}
}
X509_free(cert);
wpa_printf(MSG_DEBUG, "OpenSSL: %s - added CA certificate from engine "
"to certificate store", __func__);
SSL_set_verify(conn->ssl, SSL_VERIFY_PEER, tls_verify_cb);
conn->ca_cert_verify = 1;
return 0;
#else /* OPENSSL_NO_ENGINE */
return -1;
#endif /* OPENSSL_NO_ENGINE */
}
static int tls_connection_engine_private_key(struct tls_connection *conn)
{
#ifndef OPENSSL_NO_ENGINE
if (SSL_use_PrivateKey(conn->ssl, conn->private_key) != 1) {
tls_show_errors(MSG_ERROR, __func__,
"ENGINE: cannot use private key for TLS");
return -1;
}
if (!SSL_check_private_key(conn->ssl)) {
tls_show_errors(MSG_INFO, __func__,
"Private key failed verification");
return -1;
}
return 0;
#else /* OPENSSL_NO_ENGINE */
wpa_printf(MSG_ERROR, "SSL: Configuration uses engine, but "
"engine support was not compiled in");
return -1;
#endif /* OPENSSL_NO_ENGINE */
}
static int tls_connection_private_key(void *_ssl_ctx,
struct tls_connection *conn,
const char *private_key,
const char *private_key_passwd,
const u8 *private_key_blob,
size_t private_key_blob_len)
{
SSL_CTX *ssl_ctx = _ssl_ctx;
char *passwd;
int ok;
if (private_key == NULL && private_key_blob == NULL)
return 0;
if (private_key_passwd) {
passwd = os_strdup(private_key_passwd);
if (passwd == NULL)
return -1;
} else
passwd = NULL;
SSL_CTX_set_default_passwd_cb(ssl_ctx, tls_passwd_cb);
SSL_CTX_set_default_passwd_cb_userdata(ssl_ctx, passwd);
ok = 0;
while (private_key_blob) {
if (SSL_use_PrivateKey_ASN1(EVP_PKEY_RSA, conn->ssl,
(u8 *) private_key_blob,
private_key_blob_len) == 1) {
wpa_printf(MSG_DEBUG, "OpenSSL: SSL_use_PrivateKey_"
"ASN1(EVP_PKEY_RSA) --> OK");
ok = 1;
break;
}
if (SSL_use_PrivateKey_ASN1(EVP_PKEY_DSA, conn->ssl,
(u8 *) private_key_blob,
private_key_blob_len) == 1) {
wpa_printf(MSG_DEBUG, "OpenSSL: SSL_use_PrivateKey_"
"ASN1(EVP_PKEY_DSA) --> OK");
ok = 1;
break;
}
if (SSL_use_RSAPrivateKey_ASN1(conn->ssl,
(u8 *) private_key_blob,
private_key_blob_len) == 1) {
wpa_printf(MSG_DEBUG, "OpenSSL: "
"SSL_use_RSAPrivateKey_ASN1 --> OK");
ok = 1;
break;
}
if (tls_read_pkcs12_blob(ssl_ctx, conn->ssl, private_key_blob,
private_key_blob_len, passwd) == 0) {
wpa_printf(MSG_DEBUG, "OpenSSL: PKCS#12 as blob --> "
"OK");
ok = 1;
break;
}
break;
}
while (!ok && private_key) {
#ifndef OPENSSL_NO_STDIO
if (SSL_use_PrivateKey_file(conn->ssl, private_key,
SSL_FILETYPE_ASN1) == 1) {
wpa_printf(MSG_DEBUG, "OpenSSL: "
"SSL_use_PrivateKey_File (DER) --> OK");
ok = 1;
break;
}
if (SSL_use_PrivateKey_file(conn->ssl, private_key,
SSL_FILETYPE_PEM) == 1) {
wpa_printf(MSG_DEBUG, "OpenSSL: "
"SSL_use_PrivateKey_File (PEM) --> OK");
ok = 1;
break;
}
#else /* OPENSSL_NO_STDIO */
wpa_printf(MSG_DEBUG, "OpenSSL: %s - OPENSSL_NO_STDIO",
__func__);
#endif /* OPENSSL_NO_STDIO */
if (tls_read_pkcs12(ssl_ctx, conn->ssl, private_key, passwd)
== 0) {
wpa_printf(MSG_DEBUG, "OpenSSL: Reading PKCS#12 file "
"--> OK");
ok = 1;
break;
}
if (tls_cryptoapi_cert(conn->ssl, private_key) == 0) {
wpa_printf(MSG_DEBUG, "OpenSSL: Using CryptoAPI to "
"access certificate store --> OK");
ok = 1;
break;
}
break;
}
if (!ok) {
tls_show_errors(MSG_INFO, __func__,
"Failed to load private key");
os_free(passwd);
return -1;
}
ERR_clear_error();
SSL_CTX_set_default_passwd_cb(ssl_ctx, NULL);
os_free(passwd);
if (!SSL_check_private_key(conn->ssl)) {
tls_show_errors(MSG_INFO, __func__, "Private key failed "
"verification");
return -1;
}
wpa_printf(MSG_DEBUG, "SSL: Private key loaded successfully");
return 0;
}
static int tls_global_private_key(SSL_CTX *ssl_ctx, const char *private_key,
const char *private_key_passwd)
{
char *passwd;
if (private_key == NULL)
return 0;
if (private_key_passwd) {
passwd = os_strdup(private_key_passwd);
if (passwd == NULL)
return -1;
} else
passwd = NULL;
SSL_CTX_set_default_passwd_cb(ssl_ctx, tls_passwd_cb);
SSL_CTX_set_default_passwd_cb_userdata(ssl_ctx, passwd);
if (
#ifndef OPENSSL_NO_STDIO
SSL_CTX_use_PrivateKey_file(ssl_ctx, private_key,
SSL_FILETYPE_ASN1) != 1 &&
SSL_CTX_use_PrivateKey_file(ssl_ctx, private_key,
SSL_FILETYPE_PEM) != 1 &&
#endif /* OPENSSL_NO_STDIO */
tls_read_pkcs12(ssl_ctx, NULL, private_key, passwd)) {
tls_show_errors(MSG_INFO, __func__,
"Failed to load private key");
os_free(passwd);
ERR_clear_error();
return -1;
}
os_free(passwd);
ERR_clear_error();
SSL_CTX_set_default_passwd_cb(ssl_ctx, NULL);
if (!SSL_CTX_check_private_key(ssl_ctx)) {
tls_show_errors(MSG_INFO, __func__,
"Private key failed verification");
return -1;
}
return 0;
}
static int tls_connection_dh(struct tls_connection *conn, const char *dh_file)
{
#ifdef OPENSSL_NO_DH
if (dh_file == NULL)
return 0;
wpa_printf(MSG_ERROR, "TLS: openssl does not include DH support, but "
"dh_file specified");
return -1;
#else /* OPENSSL_NO_DH */
DH *dh;
BIO *bio;
/* TODO: add support for dh_blob */
if (dh_file == NULL)
return 0;
if (conn == NULL)
return -1;
bio = BIO_new_file(dh_file, "r");
if (bio == NULL) {
wpa_printf(MSG_INFO, "TLS: Failed to open DH file '%s': %s",
dh_file, ERR_error_string(ERR_get_error(), NULL));
return -1;
}
dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL);
BIO_free(bio);
#ifndef OPENSSL_NO_DSA
while (dh == NULL) {
DSA *dsa;
wpa_printf(MSG_DEBUG, "TLS: Failed to parse DH file '%s': %s -"
" trying to parse as DSA params", dh_file,
ERR_error_string(ERR_get_error(), NULL));
bio = BIO_new_file(dh_file, "r");
if (bio == NULL)
break;
dsa = PEM_read_bio_DSAparams(bio, NULL, NULL, NULL);
BIO_free(bio);
if (!dsa) {
wpa_printf(MSG_DEBUG, "TLS: Failed to parse DSA file "
"'%s': %s", dh_file,
ERR_error_string(ERR_get_error(), NULL));
break;
}
wpa_printf(MSG_DEBUG, "TLS: DH file in DSA param format");
dh = DSA_dup_DH(dsa);
DSA_free(dsa);
if (dh == NULL) {
wpa_printf(MSG_INFO, "TLS: Failed to convert DSA "
"params into DH params");
break;
}
break;
}
#endif /* !OPENSSL_NO_DSA */
if (dh == NULL) {
wpa_printf(MSG_INFO, "TLS: Failed to read/parse DH/DSA file "
"'%s'", dh_file);
return -1;
}
if (SSL_set_tmp_dh(conn->ssl, dh) != 1) {
wpa_printf(MSG_INFO, "TLS: Failed to set DH params from '%s': "
"%s", dh_file,
ERR_error_string(ERR_get_error(), NULL));
DH_free(dh);
return -1;
}
DH_free(dh);
return 0;
#endif /* OPENSSL_NO_DH */
}
static int tls_global_dh(SSL_CTX *ssl_ctx, const char *dh_file)
{
#ifdef OPENSSL_NO_DH
if (dh_file == NULL)
return 0;
wpa_printf(MSG_ERROR, "TLS: openssl does not include DH support, but "
"dh_file specified");
return -1;
#else /* OPENSSL_NO_DH */
DH *dh;
BIO *bio;
/* TODO: add support for dh_blob */
if (dh_file == NULL)
return 0;
if (ssl_ctx == NULL)
return -1;
bio = BIO_new_file(dh_file, "r");
if (bio == NULL) {
wpa_printf(MSG_INFO, "TLS: Failed to open DH file '%s': %s",
dh_file, ERR_error_string(ERR_get_error(), NULL));
return -1;
}
dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL);
BIO_free(bio);
#ifndef OPENSSL_NO_DSA
while (dh == NULL) {
DSA *dsa;
wpa_printf(MSG_DEBUG, "TLS: Failed to parse DH file '%s': %s -"
" trying to parse as DSA params", dh_file,
ERR_error_string(ERR_get_error(), NULL));
bio = BIO_new_file(dh_file, "r");
if (bio == NULL)
break;
dsa = PEM_read_bio_DSAparams(bio, NULL, NULL, NULL);
BIO_free(bio);
if (!dsa) {
wpa_printf(MSG_DEBUG, "TLS: Failed to parse DSA file "
"'%s': %s", dh_file,
ERR_error_string(ERR_get_error(), NULL));
break;
}
wpa_printf(MSG_DEBUG, "TLS: DH file in DSA param format");
dh = DSA_dup_DH(dsa);
DSA_free(dsa);
if (dh == NULL) {
wpa_printf(MSG_INFO, "TLS: Failed to convert DSA "
"params into DH params");
break;
}
break;
}
#endif /* !OPENSSL_NO_DSA */
if (dh == NULL) {
wpa_printf(MSG_INFO, "TLS: Failed to read/parse DH/DSA file "
"'%s'", dh_file);
return -1;
}
if (SSL_CTX_set_tmp_dh(ssl_ctx, dh) != 1) {
wpa_printf(MSG_INFO, "TLS: Failed to set DH params from '%s': "
"%s", dh_file,
ERR_error_string(ERR_get_error(), NULL));
DH_free(dh);
return -1;
}
DH_free(dh);
return 0;
#endif /* OPENSSL_NO_DH */
}
int tls_connection_get_keys(void *ssl_ctx, struct tls_connection *conn,
struct tls_keys *keys)
{
#ifdef CONFIG_FIPS
wpa_printf(MSG_ERROR, "OpenSSL: TLS keys cannot be exported in FIPS "
"mode");
return -1;
#else /* CONFIG_FIPS */
SSL *ssl;
if (conn == NULL || keys == NULL)
return -1;
ssl = conn->ssl;
if (ssl == NULL || ssl->s3 == NULL || ssl->session == NULL)
return -1;
os_memset(keys, 0, sizeof(*keys));
keys->client_random = ssl->s3->client_random;
keys->client_random_len = SSL3_RANDOM_SIZE;
keys->server_random = ssl->s3->server_random;
keys->server_random_len = SSL3_RANDOM_SIZE;
return 0;
#endif /* CONFIG_FIPS */
}
static int openssl_get_keyblock_size(SSL *ssl)
{
const EVP_CIPHER *c;
const EVP_MD *h;
int md_size;
if (ssl->enc_read_ctx == NULL || ssl->enc_read_ctx->cipher == NULL ||
ssl->read_hash == NULL)
return -1;
c = ssl->enc_read_ctx->cipher;
#if OPENSSL_VERSION_NUMBER >= 0x00909000L
h = EVP_MD_CTX_md(ssl->read_hash);
#else
h = conn->ssl->read_hash;
#endif
if (h)
md_size = EVP_MD_size(h);
#if OPENSSL_VERSION_NUMBER >= 0x10000000L
else if (ssl->s3)
md_size = ssl->s3->tmp.new_mac_secret_size;
#endif
else
return -1;
wpa_printf(MSG_DEBUG, "OpenSSL: keyblock size: key_len=%d MD_size=%d "
"IV_len=%d", EVP_CIPHER_key_length(c), md_size,
EVP_CIPHER_iv_length(c));
return 2 * (EVP_CIPHER_key_length(c) +
md_size +
EVP_CIPHER_iv_length(c));
}
static int openssl_tls_prf(void *tls_ctx, struct tls_connection *conn,
const char *label, int server_random_first,
int skip_keyblock, u8 *out, size_t out_len)
{
#ifdef CONFIG_FIPS
wpa_printf(MSG_ERROR, "OpenSSL: TLS keys cannot be exported in FIPS "
"mode");
return -1;
#else /* CONFIG_FIPS */
SSL *ssl;
u8 *rnd;
int ret = -1;
int skip = 0;
u8 *tmp_out = NULL;
u8 *_out = out;
/*
* TLS library did not support key generation, so get the needed TLS
* session parameters and use an internal implementation of TLS PRF to
* derive the key.
*/
if (conn == NULL)
return -1;
ssl = conn->ssl;
if (ssl == NULL || ssl->s3 == NULL || ssl->session == NULL ||
ssl->s3->client_random == NULL || ssl->s3->server_random == NULL ||
ssl->session->master_key == NULL)
return -1;
if (skip_keyblock) {
skip = openssl_get_keyblock_size(ssl);
if (skip < 0)
return -1;
tmp_out = os_malloc(skip + out_len);
if (!tmp_out)
return -1;
_out = tmp_out;
}
rnd = os_malloc(2 * SSL3_RANDOM_SIZE);
if (rnd == NULL)
return -1;
if (server_random_first) {
os_memcpy(rnd, ssl->s3->server_random, SSL3_RANDOM_SIZE);
os_memcpy(rnd + SSL3_RANDOM_SIZE, ssl->s3->client_random,
SSL3_RANDOM_SIZE);
} else {
os_memcpy(rnd, ssl->s3->client_random, SSL3_RANDOM_SIZE);
os_memcpy(rnd + SSL3_RANDOM_SIZE, ssl->s3->server_random,
SSL3_RANDOM_SIZE);
}
/* TODO: TLSv1.2 may need another PRF. This could use something closer
* to SSL_export_keying_material() design. */
if (tls_prf_sha1_md5(ssl->session->master_key,
ssl->session->master_key_length,
label, rnd, 2 * SSL3_RANDOM_SIZE,
_out, skip + out_len) == 0)
ret = 0;
os_free(rnd);
if (ret == 0 && skip_keyblock)
os_memcpy(out, _out + skip, out_len);
bin_clear_free(tmp_out, skip);
return ret;
#endif /* CONFIG_FIPS */
}
int tls_connection_prf(void *tls_ctx, struct tls_connection *conn,
const char *label, int server_random_first,
int skip_keyblock, u8 *out, size_t out_len)
{
#if OPENSSL_VERSION_NUMBER >= 0x10001000L
SSL *ssl;
if (conn == NULL)
return -1;
if (server_random_first || skip_keyblock)
return openssl_tls_prf(tls_ctx, conn, label,
server_random_first, skip_keyblock,
out, out_len);
ssl = conn->ssl;
if (SSL_export_keying_material(ssl, out, out_len, label,
os_strlen(label), NULL, 0, 0) == 1) {
wpa_printf(MSG_DEBUG, "OpenSSL: Using internal PRF");
return 0;
}
#endif
return openssl_tls_prf(tls_ctx, conn, label, server_random_first,
skip_keyblock, out, out_len);
}
static struct wpabuf *
openssl_handshake(struct tls_connection *conn, const struct wpabuf *in_data,
int server)
{
int res;
struct wpabuf *out_data;
/*
* Give TLS handshake data from the server (if available) to OpenSSL
* for processing.
*/
if (in_data &&
BIO_write(conn->ssl_in, wpabuf_head(in_data), wpabuf_len(in_data))
< 0) {
tls_show_errors(MSG_INFO, __func__,
"Handshake failed - BIO_write");
return NULL;
}
/* Initiate TLS handshake or continue the existing handshake */
if (server)
res = SSL_accept(conn->ssl);
else
res = SSL_connect(conn->ssl);
if (res != 1) {
int err = SSL_get_error(conn->ssl, res);
if (err == SSL_ERROR_WANT_READ)
wpa_printf(MSG_DEBUG, "SSL: SSL_connect - want "
"more data");
else if (err == SSL_ERROR_WANT_WRITE)
wpa_printf(MSG_DEBUG, "SSL: SSL_connect - want to "
"write");
else {
tls_show_errors(MSG_INFO, __func__, "SSL_connect");
conn->failed++;
}
}
/* Get the TLS handshake data to be sent to the server */
res = BIO_ctrl_pending(conn->ssl_out);
wpa_printf(MSG_DEBUG, "SSL: %d bytes pending from ssl_out", res);
out_data = wpabuf_alloc(res);
if (out_data == NULL) {
wpa_printf(MSG_DEBUG, "SSL: Failed to allocate memory for "
"handshake output (%d bytes)", res);
if (BIO_reset(conn->ssl_out) < 0) {
tls_show_errors(MSG_INFO, __func__,
"BIO_reset failed");
}
return NULL;
}
res = res == 0 ? 0 : BIO_read(conn->ssl_out, wpabuf_mhead(out_data),
res);
if (res < 0) {
tls_show_errors(MSG_INFO, __func__,
"Handshake failed - BIO_read");
if (BIO_reset(conn->ssl_out) < 0) {
tls_show_errors(MSG_INFO, __func__,
"BIO_reset failed");
}
wpabuf_free(out_data);
return NULL;
}
wpabuf_put(out_data, res);
return out_data;
}
static struct wpabuf *
openssl_get_appl_data(struct tls_connection *conn, size_t max_len)
{
struct wpabuf *appl_data;
int res;
appl_data = wpabuf_alloc(max_len + 100);
if (appl_data == NULL)
return NULL;
res = SSL_read(conn->ssl, wpabuf_mhead(appl_data),
wpabuf_size(appl_data));
if (res < 0) {
int err = SSL_get_error(conn->ssl, res);
if (err == SSL_ERROR_WANT_READ ||
err == SSL_ERROR_WANT_WRITE) {
wpa_printf(MSG_DEBUG, "SSL: No Application Data "
"included");
} else {
tls_show_errors(MSG_INFO, __func__,
"Failed to read possible "
"Application Data");
}
wpabuf_free(appl_data);
return NULL;
}
wpabuf_put(appl_data, res);
wpa_hexdump_buf_key(MSG_MSGDUMP, "SSL: Application Data in Finished "
"message", appl_data);
return appl_data;
}
static struct wpabuf *
openssl_connection_handshake(struct tls_connection *conn,
const struct wpabuf *in_data,
struct wpabuf **appl_data, int server)
{
struct wpabuf *out_data;
if (appl_data)
*appl_data = NULL;
out_data = openssl_handshake(conn, in_data, server);
if (out_data == NULL)
return NULL;
if (conn->invalid_hb_used) {
wpa_printf(MSG_INFO, "TLS: Heartbeat attack detected - do not send response");
wpabuf_free(out_data);
return NULL;
}
if (SSL_is_init_finished(conn->ssl) && appl_data && in_data)
*appl_data = openssl_get_appl_data(conn, wpabuf_len(in_data));
if (conn->invalid_hb_used) {
wpa_printf(MSG_INFO, "TLS: Heartbeat attack detected - do not send response");
if (appl_data) {
wpabuf_free(*appl_data);
*appl_data = NULL;
}
wpabuf_free(out_data);
return NULL;
}
return out_data;
}
struct wpabuf *
tls_connection_handshake(void *ssl_ctx, struct tls_connection *conn,
const struct wpabuf *in_data,
struct wpabuf **appl_data)
{
return openssl_connection_handshake(conn, in_data, appl_data, 0);
}
struct wpabuf * tls_connection_server_handshake(void *tls_ctx,
struct tls_connection *conn,
const struct wpabuf *in_data,
struct wpabuf **appl_data)
{
return openssl_connection_handshake(conn, in_data, appl_data, 1);
}
struct wpabuf * tls_connection_encrypt(void *tls_ctx,
struct tls_connection *conn,
const struct wpabuf *in_data)
{
int res;
struct wpabuf *buf;
if (conn == NULL)
return NULL;
/* Give plaintext data for OpenSSL to encrypt into the TLS tunnel. */
if ((res = BIO_reset(conn->ssl_in)) < 0 ||
(res = BIO_reset(conn->ssl_out)) < 0) {
tls_show_errors(MSG_INFO, __func__, "BIO_reset failed");
return NULL;
}
res = SSL_write(conn->ssl, wpabuf_head(in_data), wpabuf_len(in_data));
if (res < 0) {
tls_show_errors(MSG_INFO, __func__,
"Encryption failed - SSL_write");
return NULL;
}
/* Read encrypted data to be sent to the server */
buf = wpabuf_alloc(wpabuf_len(in_data) + 300);
if (buf == NULL)
return NULL;
res = BIO_read(conn->ssl_out, wpabuf_mhead(buf), wpabuf_size(buf));
if (res < 0) {
tls_show_errors(MSG_INFO, __func__,
"Encryption failed - BIO_read");
wpabuf_free(buf);
return NULL;
}
wpabuf_put(buf, res);
return buf;
}
struct wpabuf * tls_connection_decrypt(void *tls_ctx,
struct tls_connection *conn,
const struct wpabuf *in_data)
{
int res;
struct wpabuf *buf;
/* Give encrypted data from TLS tunnel for OpenSSL to decrypt. */
res = BIO_write(conn->ssl_in, wpabuf_head(in_data),
wpabuf_len(in_data));
if (res < 0) {
tls_show_errors(MSG_INFO, __func__,
"Decryption failed - BIO_write");
return NULL;
}
if (BIO_reset(conn->ssl_out) < 0) {
tls_show_errors(MSG_INFO, __func__, "BIO_reset failed");
return NULL;
}
/* Read decrypted data for further processing */
/*
* Even though we try to disable TLS compression, it is possible that
* this cannot be done with all TLS libraries. Add extra buffer space
* to handle the possibility of the decrypted data being longer than
* input data.
*/
buf = wpabuf_alloc((wpabuf_len(in_data) + 500) * 3);
if (buf == NULL)
return NULL;
res = SSL_read(conn->ssl, wpabuf_mhead(buf), wpabuf_size(buf));
if (res < 0) {
tls_show_errors(MSG_INFO, __func__,
"Decryption failed - SSL_read");
wpabuf_free(buf);
return NULL;
}
wpabuf_put(buf, res);
if (conn->invalid_hb_used) {
wpa_printf(MSG_INFO, "TLS: Heartbeat attack detected - do not send response");
wpabuf_free(buf);
return NULL;
}
return buf;
}
int tls_connection_resumed(void *ssl_ctx, struct tls_connection *conn)
{
#if OPENSSL_VERSION_NUMBER >= 0x10001000L
return conn ? SSL_cache_hit(conn->ssl) : 0;
#else
return conn ? conn->ssl->hit : 0;
#endif
}
int tls_connection_set_cipher_list(void *tls_ctx, struct tls_connection *conn,
u8 *ciphers)
{
char buf[100], *pos, *end;
u8 *c;
int ret;
if (conn == NULL || conn->ssl == NULL || ciphers == NULL)
return -1;
buf[0] = '\0';
pos = buf;
end = pos + sizeof(buf);
c = ciphers;
while (*c != TLS_CIPHER_NONE) {
const char *suite;
switch (*c) {
case TLS_CIPHER_RC4_SHA:
suite = "RC4-SHA";
break;
case TLS_CIPHER_AES128_SHA:
suite = "AES128-SHA";
break;
case TLS_CIPHER_RSA_DHE_AES128_SHA:
suite = "DHE-RSA-AES128-SHA";
break;
case TLS_CIPHER_ANON_DH_AES128_SHA:
suite = "ADH-AES128-SHA";
break;
default:
wpa_printf(MSG_DEBUG, "TLS: Unsupported "
"cipher selection: %d", *c);
return -1;
}
ret = os_snprintf(pos, end - pos, ":%s", suite);
if (os_snprintf_error(end - pos, ret))
break;
pos += ret;
c++;
}
wpa_printf(MSG_DEBUG, "OpenSSL: cipher suites: %s", buf + 1);
if (SSL_set_cipher_list(conn->ssl, buf + 1) != 1) {
tls_show_errors(MSG_INFO, __func__,
"Cipher suite configuration failed");
return -1;
}
return 0;
}
int tls_get_cipher(void *ssl_ctx, struct tls_connection *conn,
char *buf, size_t buflen)
{
const char *name;
if (conn == NULL || conn->ssl == NULL)
return -1;
name = SSL_get_cipher(conn->ssl);
if (name == NULL)
return -1;
os_strlcpy(buf, name, buflen);
return 0;
}
int tls_connection_enable_workaround(void *ssl_ctx,
struct tls_connection *conn)
{
SSL_set_options(conn->ssl, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS);
return 0;
}
#if defined(EAP_FAST) || defined(EAP_FAST_DYNAMIC) || defined(EAP_SERVER_FAST)
/* ClientHello TLS extensions require a patch to openssl, so this function is
* commented out unless explicitly needed for EAP-FAST in order to be able to
* build this file with unmodified openssl. */
int tls_connection_client_hello_ext(void *ssl_ctx, struct tls_connection *conn,
int ext_type, const u8 *data,
size_t data_len)
{
if (conn == NULL || conn->ssl == NULL || ext_type != 35)
return -1;
if (SSL_set_session_ticket_ext(conn->ssl, (void *) data,
data_len) != 1)
return -1;
return 0;
}
#endif /* EAP_FAST || EAP_FAST_DYNAMIC || EAP_SERVER_FAST */
int tls_connection_get_failed(void *ssl_ctx, struct tls_connection *conn)
{
if (conn == NULL)
return -1;
return conn->failed;
}
int tls_connection_get_read_alerts(void *ssl_ctx, struct tls_connection *conn)
{
if (conn == NULL)
return -1;
return conn->read_alerts;
}
int tls_connection_get_write_alerts(void *ssl_ctx, struct tls_connection *conn)
{
if (conn == NULL)
return -1;
return conn->write_alerts;
}
#ifdef HAVE_OCSP
static void ocsp_debug_print_resp(OCSP_RESPONSE *rsp)
{
#ifndef CONFIG_NO_STDOUT_DEBUG
BIO *out;
size_t rlen;
char *txt;
int res;
if (wpa_debug_level > MSG_DEBUG)
return;
out = BIO_new(BIO_s_mem());
if (!out)
return;
OCSP_RESPONSE_print(out, rsp, 0);
rlen = BIO_ctrl_pending(out);
txt = os_malloc(rlen + 1);
if (!txt) {
BIO_free(out);
return;
}
res = BIO_read(out, txt, rlen);
if (res > 0) {
txt[res] = '\0';
wpa_printf(MSG_DEBUG, "OpenSSL: OCSP Response\n%s", txt);
}
os_free(txt);
BIO_free(out);
#endif /* CONFIG_NO_STDOUT_DEBUG */
}
static void debug_print_cert(X509 *cert, const char *title)
{
#ifndef CONFIG_NO_STDOUT_DEBUG
BIO *out;
size_t rlen;
char *txt;
int res;
if (wpa_debug_level > MSG_DEBUG)
return;
out = BIO_new(BIO_s_mem());
if (!out)
return;
X509_print(out, cert);
rlen = BIO_ctrl_pending(out);
txt = os_malloc(rlen + 1);
if (!txt) {
BIO_free(out);
return;
}
res = BIO_read(out, txt, rlen);
if (res > 0) {
txt[res] = '\0';
wpa_printf(MSG_DEBUG, "OpenSSL: %s\n%s", title, txt);
}
os_free(txt);
BIO_free(out);
#endif /* CONFIG_NO_STDOUT_DEBUG */
}
static int ocsp_resp_cb(SSL *s, void *arg)
{
struct tls_connection *conn = arg;
const unsigned char *p;
int len, status, reason;
OCSP_RESPONSE *rsp;
OCSP_BASICRESP *basic;
OCSP_CERTID *id;
ASN1_GENERALIZEDTIME *produced_at, *this_update, *next_update;
X509_STORE *store;
STACK_OF(X509) *certs = NULL;
len = SSL_get_tlsext_status_ocsp_resp(s, &p);
if (!p) {
wpa_printf(MSG_DEBUG, "OpenSSL: No OCSP response received");
return (conn->flags & TLS_CONN_REQUIRE_OCSP) ? 0 : 1;
}
wpa_hexdump(MSG_DEBUG, "OpenSSL: OCSP response", p, len);
rsp = d2i_OCSP_RESPONSE(NULL, &p, len);
if (!rsp) {
wpa_printf(MSG_INFO, "OpenSSL: Failed to parse OCSP response");
return 0;
}
ocsp_debug_print_resp(rsp);
status = OCSP_response_status(rsp);
if (status != OCSP_RESPONSE_STATUS_SUCCESSFUL) {
wpa_printf(MSG_INFO, "OpenSSL: OCSP responder error %d (%s)",
status, OCSP_response_status_str(status));
return 0;
}
basic = OCSP_response_get1_basic(rsp);
if (!basic) {
wpa_printf(MSG_INFO, "OpenSSL: Could not find BasicOCSPResponse");
return 0;
}
store = SSL_CTX_get_cert_store(conn->ssl_ctx);
if (conn->peer_issuer) {
debug_print_cert(conn->peer_issuer, "Add OCSP issuer");
if (X509_STORE_add_cert(store, conn->peer_issuer) != 1) {
tls_show_errors(MSG_INFO, __func__,
"OpenSSL: Could not add issuer to certificate store");
}
certs = sk_X509_new_null();
if (certs) {
X509 *cert;
cert = X509_dup(conn->peer_issuer);
if (cert && !sk_X509_push(certs, cert)) {
tls_show_errors(
MSG_INFO, __func__,
"OpenSSL: Could not add issuer to OCSP responder trust store");
X509_free(cert);
sk_X509_free(certs);
certs = NULL;
}
if (certs && conn->peer_issuer_issuer) {
cert = X509_dup(conn->peer_issuer_issuer);
if (cert && !sk_X509_push(certs, cert)) {
tls_show_errors(
MSG_INFO, __func__,
"OpenSSL: Could not add issuer's issuer to OCSP responder trust store");
X509_free(cert);
}
}
}
}
status = OCSP_basic_verify(basic, certs, store, OCSP_TRUSTOTHER);
sk_X509_pop_free(certs, X509_free);
if (status <= 0) {
tls_show_errors(MSG_INFO, __func__,
"OpenSSL: OCSP response failed verification");
OCSP_BASICRESP_free(basic);
OCSP_RESPONSE_free(rsp);
return 0;
}
wpa_printf(MSG_DEBUG, "OpenSSL: OCSP response verification succeeded");
if (!conn->peer_cert) {
wpa_printf(MSG_DEBUG, "OpenSSL: Peer certificate not available for OCSP status check");
OCSP_BASICRESP_free(basic);
OCSP_RESPONSE_free(rsp);
return 0;
}
if (!conn->peer_issuer) {
wpa_printf(MSG_DEBUG, "OpenSSL: Peer issuer certificate not available for OCSP status check");
OCSP_BASICRESP_free(basic);
OCSP_RESPONSE_free(rsp);
return 0;
}
id = OCSP_cert_to_id(NULL, conn->peer_cert, conn->peer_issuer);
if (!id) {
wpa_printf(MSG_DEBUG, "OpenSSL: Could not create OCSP certificate identifier");
OCSP_BASICRESP_free(basic);
OCSP_RESPONSE_free(rsp);
return 0;
}
if (!OCSP_resp_find_status(basic, id, &status, &reason, &produced_at,
&this_update, &next_update)) {
wpa_printf(MSG_INFO, "OpenSSL: Could not find current server certificate from OCSP response%s",
(conn->flags & TLS_CONN_REQUIRE_OCSP) ? "" :
" (OCSP not required)");
OCSP_BASICRESP_free(basic);
OCSP_RESPONSE_free(rsp);
return (conn->flags & TLS_CONN_REQUIRE_OCSP) ? 0 : 1;
}
if (!OCSP_check_validity(this_update, next_update, 5 * 60, -1)) {
tls_show_errors(MSG_INFO, __func__,
"OpenSSL: OCSP status times invalid");
OCSP_BASICRESP_free(basic);
OCSP_RESPONSE_free(rsp);
return 0;
}
OCSP_BASICRESP_free(basic);
OCSP_RESPONSE_free(rsp);
wpa_printf(MSG_DEBUG, "OpenSSL: OCSP status for server certificate: %s",
OCSP_cert_status_str(status));
if (status == V_OCSP_CERTSTATUS_GOOD)
return 1;
if (status == V_OCSP_CERTSTATUS_REVOKED)
return 0;
if (conn->flags & TLS_CONN_REQUIRE_OCSP) {
wpa_printf(MSG_DEBUG, "OpenSSL: OCSP status unknown, but OCSP required");
return 0;
}
wpa_printf(MSG_DEBUG, "OpenSSL: OCSP status unknown, but OCSP was not required, so allow connection to continue");
return 1;
}
static int ocsp_status_cb(SSL *s, void *arg)
{
char *tmp;
char *resp;
size_t len;
if (tls_global->ocsp_stapling_response == NULL) {
wpa_printf(MSG_DEBUG, "OpenSSL: OCSP status callback - no response configured");
return SSL_TLSEXT_ERR_OK;
}
resp = os_readfile(tls_global->ocsp_stapling_response, &len);
if (resp == NULL) {
wpa_printf(MSG_DEBUG, "OpenSSL: OCSP status callback - could not read response file");
/* TODO: Build OCSPResponse with responseStatus = internalError
*/
return SSL_TLSEXT_ERR_OK;
}
wpa_printf(MSG_DEBUG, "OpenSSL: OCSP status callback - send cached response");
tmp = OPENSSL_malloc(len);
if (tmp == NULL) {
os_free(resp);
return SSL_TLSEXT_ERR_ALERT_FATAL;
}
os_memcpy(tmp, resp, len);
os_free(resp);
SSL_set_tlsext_status_ocsp_resp(s, tmp, len);
return SSL_TLSEXT_ERR_OK;
}
#endif /* HAVE_OCSP */
int tls_connection_set_params(void *tls_ctx, struct tls_connection *conn,
const struct tls_connection_params *params)
{
int ret;
unsigned long err;
int can_pkcs11 = 0;
const char *key_id = params->key_id;
const char *cert_id = params->cert_id;
const char *ca_cert_id = params->ca_cert_id;
const char *engine_id = params->engine ? params->engine_id : NULL;
if (conn == NULL)
return -1;
/*
* If the engine isn't explicitly configured, and any of the
* cert/key fields are actually PKCS#11 URIs, then automatically
* use the PKCS#11 ENGINE.
*/
if (!engine_id || os_strcmp(engine_id, "pkcs11") == 0)
can_pkcs11 = 1;
if (!key_id && params->private_key && can_pkcs11 &&
os_strncmp(params->private_key, "pkcs11:", 7) == 0) {
can_pkcs11 = 2;
key_id = params->private_key;
}
if (!cert_id && params->client_cert && can_pkcs11 &&
os_strncmp(params->client_cert, "pkcs11:", 7) == 0) {
can_pkcs11 = 2;
cert_id = params->client_cert;
}
if (!ca_cert_id && params->ca_cert && can_pkcs11 &&
os_strncmp(params->ca_cert, "pkcs11:", 7) == 0) {
can_pkcs11 = 2;
ca_cert_id = params->ca_cert;
}
/* If we need to automatically enable the PKCS#11 ENGINE, do so. */
if (can_pkcs11 == 2 && !engine_id)
engine_id = "pkcs11";
if (params->flags & TLS_CONN_EAP_FAST) {
wpa_printf(MSG_DEBUG,
"OpenSSL: Use TLSv1_method() for EAP-FAST");
if (SSL_set_ssl_method(conn->ssl, TLSv1_method()) != 1) {
tls_show_errors(MSG_INFO, __func__,
"Failed to set TLSv1_method() for EAP-FAST");
return -1;
}
}
while ((err = ERR_get_error())) {
wpa_printf(MSG_INFO, "%s: Clearing pending SSL error: %s",
__func__, ERR_error_string(err, NULL));
}
if (engine_id) {
wpa_printf(MSG_DEBUG, "SSL: Initializing TLS engine");
ret = tls_engine_init(conn, engine_id, params->pin,
key_id, cert_id, ca_cert_id);
if (ret)
return ret;
}
if (tls_connection_set_subject_match(conn,
params->subject_match,
params->altsubject_match,
params->suffix_match,
params->domain_match))
return -1;
if (engine_id && ca_cert_id) {
if (tls_connection_engine_ca_cert(tls_ctx, conn,
ca_cert_id))
return TLS_SET_PARAMS_ENGINE_PRV_VERIFY_FAILED;
} else if (tls_connection_ca_cert(tls_ctx, conn, params->ca_cert,
params->ca_cert_blob,
params->ca_cert_blob_len,
params->ca_path))
return -1;
if (engine_id && cert_id) {
if (tls_connection_engine_client_cert(conn, cert_id))
return TLS_SET_PARAMS_ENGINE_PRV_VERIFY_FAILED;
} else if (tls_connection_client_cert(conn, params->client_cert,
params->client_cert_blob,
params->client_cert_blob_len))
return -1;
if (engine_id && key_id) {
wpa_printf(MSG_DEBUG, "TLS: Using private key from engine");
if (tls_connection_engine_private_key(conn))
return TLS_SET_PARAMS_ENGINE_PRV_VERIFY_FAILED;
} else if (tls_connection_private_key(tls_ctx, conn,
params->private_key,
params->private_key_passwd,
params->private_key_blob,
params->private_key_blob_len)) {
wpa_printf(MSG_INFO, "TLS: Failed to load private key '%s'",
params->private_key);
return -1;
}
if (tls_connection_dh(conn, params->dh_file)) {
wpa_printf(MSG_INFO, "TLS: Failed to load DH file '%s'",
params->dh_file);
return -1;
}
if (params->openssl_ciphers &&
SSL_set_cipher_list(conn->ssl, params->openssl_ciphers) != 1) {
wpa_printf(MSG_INFO,
"OpenSSL: Failed to set cipher string '%s'",
params->openssl_ciphers);
return -1;
}
#ifdef SSL_OP_NO_TICKET
if (params->flags & TLS_CONN_DISABLE_SESSION_TICKET)
SSL_set_options(conn->ssl, SSL_OP_NO_TICKET);
#ifdef SSL_clear_options
else
SSL_clear_options(conn->ssl, SSL_OP_NO_TICKET);
#endif /* SSL_clear_options */
#endif /* SSL_OP_NO_TICKET */
#ifdef SSL_OP_NO_TLSv1_1
if (params->flags & TLS_CONN_DISABLE_TLSv1_1)
SSL_set_options(conn->ssl, SSL_OP_NO_TLSv1_1);
else
SSL_clear_options(conn->ssl, SSL_OP_NO_TLSv1_1);
#endif /* SSL_OP_NO_TLSv1_1 */
#ifdef SSL_OP_NO_TLSv1_2
if (params->flags & TLS_CONN_DISABLE_TLSv1_2)
SSL_set_options(conn->ssl, SSL_OP_NO_TLSv1_2);
else
SSL_clear_options(conn->ssl, SSL_OP_NO_TLSv1_2);
#endif /* SSL_OP_NO_TLSv1_2 */
#ifdef HAVE_OCSP
if (params->flags & TLS_CONN_REQUEST_OCSP) {
SSL_CTX *ssl_ctx = tls_ctx;
SSL_set_tlsext_status_type(conn->ssl, TLSEXT_STATUSTYPE_ocsp);
SSL_CTX_set_tlsext_status_cb(ssl_ctx, ocsp_resp_cb);
SSL_CTX_set_tlsext_status_arg(ssl_ctx, conn);
}
#endif /* HAVE_OCSP */
conn->flags = params->flags;
tls_get_errors(tls_ctx);
return 0;
}
int tls_global_set_params(void *tls_ctx,
const struct tls_connection_params *params)
{
SSL_CTX *ssl_ctx = tls_ctx;
unsigned long err;
while ((err = ERR_get_error())) {
wpa_printf(MSG_INFO, "%s: Clearing pending SSL error: %s",
__func__, ERR_error_string(err, NULL));
}
if (tls_global_ca_cert(ssl_ctx, params->ca_cert))
return -1;
if (tls_global_client_cert(ssl_ctx, params->client_cert))
return -1;
if (tls_global_private_key(ssl_ctx, params->private_key,
params->private_key_passwd))
return -1;
if (tls_global_dh(ssl_ctx, params->dh_file)) {
wpa_printf(MSG_INFO, "TLS: Failed to load DH file '%s'",
params->dh_file);
return -1;
}
if (params->openssl_ciphers &&
SSL_CTX_set_cipher_list(ssl_ctx, params->openssl_ciphers) != 1) {
wpa_printf(MSG_INFO,
"OpenSSL: Failed to set cipher string '%s'",
params->openssl_ciphers);
return -1;
}
#ifdef SSL_OP_NO_TICKET
if (params->flags & TLS_CONN_DISABLE_SESSION_TICKET)
SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_TICKET);
#ifdef SSL_CTX_clear_options
else
SSL_CTX_clear_options(ssl_ctx, SSL_OP_NO_TICKET);
#endif /* SSL_clear_options */
#endif /* SSL_OP_NO_TICKET */
#ifdef HAVE_OCSP
SSL_CTX_set_tlsext_status_cb(ssl_ctx, ocsp_status_cb);
SSL_CTX_set_tlsext_status_arg(ssl_ctx, ssl_ctx);
os_free(tls_global->ocsp_stapling_response);
if (params->ocsp_stapling_response)
tls_global->ocsp_stapling_response =
os_strdup(params->ocsp_stapling_response);
else
tls_global->ocsp_stapling_response = NULL;
#endif /* HAVE_OCSP */
return 0;
}
unsigned int tls_capabilities(void *tls_ctx)
{
return 0;
}
#if defined(EAP_FAST) || defined(EAP_FAST_DYNAMIC) || defined(EAP_SERVER_FAST)
/* Pre-shared secred requires a patch to openssl, so this function is
* commented out unless explicitly needed for EAP-FAST in order to be able to
* build this file with unmodified openssl. */
#ifdef OPENSSL_IS_BORINGSSL
static int tls_sess_sec_cb(SSL *s, void *secret, int *secret_len,
STACK_OF(SSL_CIPHER) *peer_ciphers,
const SSL_CIPHER **cipher, void *arg)
#else /* OPENSSL_IS_BORINGSSL */
static int tls_sess_sec_cb(SSL *s, void *secret, int *secret_len,
STACK_OF(SSL_CIPHER) *peer_ciphers,
SSL_CIPHER **cipher, void *arg)
#endif /* OPENSSL_IS_BORINGSSL */
{
struct tls_connection *conn = arg;
int ret;
if (conn == NULL || conn->session_ticket_cb == NULL)
return 0;
ret = conn->session_ticket_cb(conn->session_ticket_cb_ctx,
conn->session_ticket,
conn->session_ticket_len,
s->s3->client_random,
s->s3->server_random, secret);
os_free(conn->session_ticket);
conn->session_ticket = NULL;
if (ret <= 0)
return 0;
*secret_len = SSL_MAX_MASTER_KEY_LENGTH;
return 1;
}
static int tls_session_ticket_ext_cb(SSL *s, const unsigned char *data,
int len, void *arg)
{
struct tls_connection *conn = arg;
if (conn == NULL || conn->session_ticket_cb == NULL)
return 0;
wpa_printf(MSG_DEBUG, "OpenSSL: %s: length=%d", __func__, len);
os_free(conn->session_ticket);
conn->session_ticket = NULL;
wpa_hexdump(MSG_DEBUG, "OpenSSL: ClientHello SessionTicket "
"extension", data, len);
conn->session_ticket = os_malloc(len);
if (conn->session_ticket == NULL)
return 0;
os_memcpy(conn->session_ticket, data, len);
conn->session_ticket_len = len;
return 1;
}
#endif /* EAP_FAST || EAP_FAST_DYNAMIC || EAP_SERVER_FAST */
int tls_connection_set_session_ticket_cb(void *tls_ctx,
struct tls_connection *conn,
tls_session_ticket_cb cb,
void *ctx)
{
#if defined(EAP_FAST) || defined(EAP_FAST_DYNAMIC) || defined(EAP_SERVER_FAST)
conn->session_ticket_cb = cb;
conn->session_ticket_cb_ctx = ctx;
if (cb) {
if (SSL_set_session_secret_cb(conn->ssl, tls_sess_sec_cb,
conn) != 1)
return -1;
SSL_set_session_ticket_ext_cb(conn->ssl,
tls_session_ticket_ext_cb, conn);
} else {
if (SSL_set_session_secret_cb(conn->ssl, NULL, NULL) != 1)
return -1;
SSL_set_session_ticket_ext_cb(conn->ssl, NULL, NULL);
}
return 0;
#else /* EAP_FAST || EAP_FAST_DYNAMIC || EAP_SERVER_FAST */
return -1;
#endif /* EAP_FAST || EAP_FAST_DYNAMIC || EAP_SERVER_FAST */
}
int tls_get_library_version(char *buf, size_t buf_len)
{
return os_snprintf(buf, buf_len, "OpenSSL build=%s run=%s",
OPENSSL_VERSION_TEXT,
SSLeay_version(SSLEAY_VERSION));
}